IPAD not fully charging

My ipad 3 dosen't fully charge even after I charged overnight. It's the second one Apple store replaced for me, the first one had the same issue. Does anyone have the same issue? I thought it was the cable issue, I changed a new one, it is the same.

Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
And this - Unplug the charger from the iPad and then replug. May resume charging.
Or - Recalibrate the battery. See link below.
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Similar Messages

  • 3rd Generation iPad not fully charging...

    Is anyone else not able to fully charge their 3rd Gen iPad? I charge mine throughout the night (for about 8 hours), and I am only getting 97% of a full charge. This was not an issue on my iPad 2.  Not sure why I can't get 100%.

    - Try another cable.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar                 

  • I have low battery on my ipad and it still works but it is not fully charging what can i do

    i have a low battery on my ipad it still works but it is not fully charged what can i do to fully charge it

    Clean the charging port.
    Charge using the supplied wall charger, not your computer.
    Try another charger and/or cable.
    If none of these work, you have a hardware problem.

  • HT4623 Why is it taking so long to charge ipad 24 hours and not fully charged any ideas?

    This ipad does not fully charge any ideas?

    How are you trying to charge it? It's best charged using its supplied power brick plugged into the wall. If you're trying to charge it via USB your results will be mediocre at best since most USB ports don't put out enough power. Same results if you are using an iPhone charger for your iPad.

  • Creative Zen Vision M not fully charging

    (Creative Zen Vision M not fully charging( Hi, I recently bought a refurbished ZVM that doesnt seem to charging properly. When I first got it, it hadnt been charged in quite some time so the battery was overdead. My PC couldnt detect it when I connected it via usb and it didnt even start charging at all. I then connected it to a wall charger and it finally started charging. The strange thing is it never fully charges. I've charged it twice now, both times for at least about 2 hours, and the battery doesnt go more than 50%. And when I connect it to my PC to transfer songs, instead of resuming its charge, my battery runs out. Is this a case of a faulty battery? I li've in Australia and I bought it from the USA. I would prefer not to go through the trouble of returning it if I could. Anything I should do like leaving it to charge for an even longer time? Also one more thing I should mention. When I remove the wall charger and plug it back in, it takes the ZVM sometime to detect it, about 30 minutes or so, and start charging again. Any help or suggestions would be greatly appreciated.

    I have the exact same problem. I just mailed mine in for repair today.

  • If my computer is not fully charged but i'm shutting it down for the night, is it better to leave it plugged in or to unplug it?

    If my computer is not fully charged but i'm shutting it down for the night, is it better to leave it plugged in or to unplug it?

    Your computer will not overcharge, even when off. If the battery is sufficiently low, it will top off the battery and stop charging. By morning, the light will be green because it is done charging.
    There is no need to disconnect the power when you shut it off. The SMC microcontroller will continue to supervise charging the battery, even when the main processor is shut down.
    https://www.apple.com/batteries/notebooks.html

  • When i plug in my 5c overnight to charge, it did not fully charge

    my iPhone 5c has ios 8.1.2  the memory available is 7.8gb storage capacity is12.8gb.  when I plug in the charger to charge overnight, it does not fully charge.  my phone was at 40% power last night and I plugged in the charger and this morning it was at only 61% power.  When I plugged it in, the battery symbol did not turn green, nor did it make the beep sound.  What is wrong?

    Are you using a genuine Apple charger and cable? If not, I would suspect there's a problem with either the plug or cable. Also, make sure the outlet you're using is working properly. Did a breaker blow through the night?

  • Macbook pro not fully charging

    My macbook pro is less than one month old and it started not fully charging a few days ago. It was at 97% when the light turned green, and wouldn't go up any more. I always have my keyboard light off & the screen light very dim so don't tell me to lower it. I then decided to calibrate the battery and it charged 100% but I unplugged it for a little bit and it dropped to 99% and will not go up anymore. The charger light is green and it thinks it's fully charged. What is going on?!! this is new!

    Normal behaviour. See below.
    http://support.apple.com/kb/TS1909
    Stedman

  • Apapter light is green, but MacBook is not fully charged.

    My MacBook's power adapter light stays green, but my computer is not fully charged, the indicator in the menu bar says 98%. I am very confused, anyone have a possible solution?

    The charging circuitry turns off once the battery is fully charged. It will come on again when the charge level drops below 95 percent. Until then the battery is fully charged so the charge indicator on the adapter will stay green.
    If your battery never attains 100 percent charge level it may be because you've never calibrated the battery.
    If you've calibrated the battery but it still will not charge fully or doesn't hold the charge, then the battery may be defective. You can have it replaced under your warranty by taking the computer to an Apple service center or calling AppleCare. Click on the Contact Support link at the bottom of this page for AppleCare's phone number.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • IPhone 5 not fully charging

    Hi,
    iPhone 5 - recently noticed when plugged in overnight, it was not fully charging (maybe charging to 75-80% when I checked in morning).  Unplug and plug lightning connector back into phone, and leave it alone.  It will eventually charge all the way.  Anyone else seen this?

    Should also mention - let battery completely run down when I noticed this issue and then plugged it in to charge.  Still same behavior.

  • Ipad not getting charged while connected to the laptop

    ipad not getting charged while connected to the laptop.

    It's no different from the iPad 1 in  that regard.  When connected to a computer via USB it should charge when sleeping only.   Hit the sleep button and leave it for a while to see if that works.   It's much slower charging that way than using the actual charger.
    Not all USB's are powered, or powered enough, so what the previous poster said could also be the case.

  • The fully charged battery symbol shows up (a plug instead of a lightning bolt) when it's actually not fully charged! It also stops charging!

    The fully charged battery symbol shows up (a plug instead of a lightning bolt) when it's actually not fully charged! It also stops charging! How do I fix this?

    Did you already try to set it up "as new device" How to back up your data and set up as a new device
    If this does not work, try again, this time without using the latest backup, in case it contains corrupt data, causing your problems.

  • Battery will not fully charge.

    My battery will not fully charge anymore. Also, it seems that my phone has a hard time charging because sometimes the bolt will not show even when it is plugged in so it seems like something is loose. I am going to go to Verizon today to have them look into it. Does anyone have any ideas?

    Hey SophieLouiseBacon,
    Have you been able to try a different cable, it a different cable does the same thing then it is probably and issue with the port on the device.
    Let us know how you make out at the store.
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • X6-00 Not fully charging

    Hi 
             My Nokia X6-16 GB is not fully charging. when i put it on chaging for one day it keep on charging.. Its not stopping the charging when fully charged. please help me.
    Regards
    Devanand

    Hi Alcopops,
    Thank you for posting and welcome to the forum. 
    Try to customize the Multimedia Settings of your phone for you to send large size of photos through MMS. Go to Messaging, select Options and then go to Settings. Once done, tap on Multimedia Message and then select Image Size. From there, you will be having an option to change it from small to large. If this doesn't work, consider double checking it with your Service Provider as they may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS. And also, make sure that the device is running its latest software. 
    Try this and let us know the outcome.
    Cheers, 
    periwinkle28

  • After charging my iphone5 for many hours I checked it and it 100% charged but not fully charged as the sign of charging on the top of the screen is still and the sign of unblug the charging cable doesn't show up and this happened several times ...!?

    After charging my iphone5 for many hours I checked it and it 100% charged but not fully charged as the sign of charging on the top of the screen is still and the sign of unblug the charging cable doesn't show up and this happened several times ...!? What is the problem and how I fix it !? Thanks in advance :)

    Apple told you it was unrepairable.... You had it serviced by an unauthorized party. It's now no longer eligible for out of warranty replacement by Apple.
    There's really nothing else we can say about it. Find a competent 3rd party repair shop or buy a new one.

Maybe you are looking for

  • DBMS_METADATA.GET_DDL and Materialized View

    hi gurus, In 10gR2, i have created a materialized view EMP_MV with a simple structure. I wanted to get the DDL of EMP_MV. I used DBMS_METADATA to get the DDL, select DBMS_METADATA.GET_DDL('MATERIALIZED_VIEW','EMP_MV','TARGET') into v_return from dual

  • No pdf printer in mac - so No pdf printer available in 'virtual machine' on the mac-any suggestions?

    I am running Mac OS X version 10.6.2 and I installed CS4 on the laptop.  I have Acrobat 9 Pro - and no pdf 'printer' due to Mac's new operating system.  Unfortunately, I also have a virtual machine on my laptop running Windows XP (with VMWare Fusion)

  • #NAME in Content column when  Activities Overview is exported to Excel

    When exporting Acitivities Overview to Excel, some of the columns under Content have #NAME in them and Excel indicates that it thinks there is an invalid function involved.  When the text is veiwed in the address bar, there is an = sign preceding the

  • ExecuteUpdate() is not working

    I have a Statement and I am calling the executeUpdate() method to execute some SQL into my database. It says I'm using it from a static context, while my calling method is not! public void createTable()     { // describe Connection con, open connecti

  • PO output print in vendor language

    Hi, 1. I need to get the print of Purchase Order based on vendor      language and not the message language. How to do this? 2. I am given a set of translated words to be used in the     output in each language. Should I put some command in the form/