Ipad not getting charged while connected to the laptop

ipad not getting charged while connected to the laptop.

It's no different from the iPad 1 in that regard. When connected to a computer via USB it should charge when sleeping only. Hit the sleep button and leave it for a while to see if that works. It's much slower charging that way than using the actual charger.
Not all USB's are powered, or powered enough, so what the previous poster said could also be the case.

Similar Messages

Blackberry does not get charged while talking on the Phone.

Hello All,
I had purchased my Balckberry perl 8100 about a year ago...but untill recently I never noticed this problem with my phone. My Phone doesnt get charged while I am talking. I have asked all my friends and it appears there is a problem with my phone. Can anyone please suggest what can be done?
Message Edited by Veena on 09-10-2009 08:55 AM

Well, it's hard to say for certain...but BB's are designed to shut down once power level reaches some amount -- see this KB for those levels:
KB04552 Battery level indicators
It may be possible that the charge coming in is less than the amount being consumed on a call, resulting in a net drain from the battery, ultimately resulting in shut down...but frankly that sounds invalid to me, though I've no way to be sure. Perhaps your charger is somehow faulty? I honestly rarely let my battery drain to such a low point...and also carry a spare battery just in case.
I've searched the KB's for all kinds of search strings with no luck to your specific situation...but perhaps you'll do better? Here's the link to the public KB's:
http://www.blackberry.com/btsc/microsites/microsite.do
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Why is it that my ipad 3rd gen does not charge while connected to my laptop

my ipad 3rd gen will not charge while connected to my laptop, just beside the battery meter it states not charging.

Beacause the USB port of most computers don't supply sufficient current to properly charge it. It is best to charge it using the supplied power supply.

TS1363 My iTunes and Laptop doesnt detect my iPhone, But it is charging when connected to the Laptop?

My iTunes and Laptop doesnt detect my iPhone, But it is charging when connected to the Laptop?

Try troubleshooting steps mentioned here: http://support.apple.com/kb/TS1538

Ipad not getting charged

Got an ipad mini 1 month ago.
1. It does not have a preloaded calculator.
2. It does not detect WiFi signals all the time.
3. The most recent problem: it is not getting charged. Tried charging it through the comp, power socket. Not a problem with the lightning cable as it is charging other phones. Kindly assist.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
If problems persist, take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

I have purchased a new ipad2. I am connected to wifi and can not get it to connect to the app store. Am I missing something?

I have purchase a new Ipad2. I am having difficulty getting on the app store. It just says it cannot connect to the server. Help

Have you been syncing the iPod with iTunes? Then you just connect the iPad and set it up through iTunes and sync any content you want onto it.
http://support.apple.com/kb/ht1386
In terms of games/apps. If they are not universal (you will see a + symbol next to them) or made for iPad (you would see an HD in the name, usually) then they won't look good on an iPad as those apps will open in a iPod sized window, giving you the option to enlarge.

Sierra Wireless Aircard - not receiving data while connected to the network

Hello,
Can anyone please help me out here please.
I have a wireless internet connection on the Bigpond 3g network in Australia. It uses the Sierra Wireless Aircard 880U and the Bigpond connection manager software (version 2.10.18) to connect to the internet. This has been running pretty fine since I installed it some 4 months ago.
Now in the last 3 weeks I've been having connection problems, or actually I'm still connected, but data just suddenly stops coming in. The connection manager software states that I'm still connected to the 3g network; and I can see that data is still sent from my mac (the software tracks the data sent and data received); however there's no more data coming in (or very little, as in bytes), and Safari (or any other application like Skype, the widgets or mail) eventually fails (just happened again: "Safari could not open the page “http://discussions.apple.com/post!post.jspa?forumID=1222&reply=false” because the server is not responding" - while I was still connected according to the connection manager).
Also I can't ping anymore. Packets are sent out, but nothing comes back.
Now I've spent the last 3 weeks on the phone with Bigpond support but they can't resolve the problem. We have tried all the resources; including reinstalling the software, de- and reactivating my account, rebooting, removing and reconnecting the device, creating a specific location for the wireless card as to reduce any possible interference from airport, etc. But this hasn't resolved the problem.
The support people are now stating that it is not their device or software that is faulty (as the can see that I'm connected to the network just fine on their side), but something specific to my Mac that is causing the data problem and that I need to contact mac support.
The annoying fact is that the problem is erratic. Usually when I start up my mac in the morning; I can connect and surf the web without a problem, but later in the day, the internet connection will fail. I will restart the mac and bigpond connection manager and sometimes I may be able to get back online, but most of the time there is no more data (or very little data) coming in even though the connection manager tells me I am connected to the network and data is going out and very little coming back in (a few kilobytes at the most). Personally I have the impression that the Bigpond connection manager software is not too stable, but I can't put my finger on it.
Also the connection manger software seems to behave erratic. Sometimes it is connected and I can surf fine, while it states that it is (still) determining the IP adress, other times it will show a valid IP adress but I'm not getting data (or vice versa). Also I've been getting other error messages, like: "unable to initialise the device" and a mac popup message: " a modem error ocurred; cannot negotiate a valid set of ppp...."
Hopefully theres someone who can give me a hand here based on what I've written. I'm at wits end. Just let me know if I need to supply need more info;
thanks

I have just discovered another aspect of this issue.
If I have the Macbook connected to my router which is then connected to the Mac Pro but the router is not connected to the internet then PS on the Macbook starts up with no problem.
If the Mac Pro is not connected to the Router then PS will not start up on the Mac Book.
I suspect that this behavour started after I installed 10.5.7 - however as I cannot recollect starting up PS in standalone mode prior to last week before I installed 10.5.7 via the combo package.
So any clues please
Derek

New iPad Won't Charge when connected to Mac laptop

Heading pretty much says it all. I get a window that says something like "this acessory won't charge" or something like that on the computer screen. I can download music just fine, but the computer won't charge the unit.
Anybody else have that problem?
Thanks,
Tom

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes.
 Cheers, Tom

LabVIEW Touch Panel -- I can not get activesync to connect between the TPC-2012 and my XP workstation. There is no USB client connection on TPC-2012

How do I get the TPC-2012 to connect to my workstation? I have read all the hardware manuals, getting started manuals: nothing works. The remote access using http://x.x.x.x/RemoteAdmin does not work. I have tried to get the FTP service working using the instructions in "How do I configure the FTP server on tpc-2006 and TPC-2016" . Active sync seems to want a USB connection only. I have tried to connect a serial line between com1 on the TPC and com4 on my XP workstation with no results.
I have been able to use the touch panel module with my iPAQ. It worked flawlessly the first time.
Help!
Louis Prugh
General Dynamics

Hi David,
thank you once again for your help.
So when viewing your Local Area Connection>>Status
you're seeing data packets sent but no packets received on your desktop
machine? - Yes
Is your desktop configured with a static IP address or is it
configured to obtain an IP address automatically?I' ve tried both static IP address and that it obtain IP address automatically, I have also done it with the TPC.
Also, does your TPC
get a valid IP address when the connection to your desktop is present? - when TPC is set to obtain adress automatically it gets IP address and then after some time it loses it - it is set to 0.0.0.0, and then it obtains the IP adress again and so on.
Can you provide the address, subnet, and gateway you're getting for
both machines?- I've done it, but it didn'e help
Also any firewall settings or exceptions you may have
active if the firewall is enabled? - firewall is disabled
I'd also like to know what
modules and toolkits you do have installed on both the TPC - TPC is new and I haven't installed there anything.
On my desktop - I have standard Labview 8.2,the real time module is installed. All I know, there are already drivers for TPC2012 in this LabView version. On the included CD I have only drivers for another TPCs.
Thanks,
Martin

Getting exception while connecting to the cache server.

Tangosol.Net.Messaging.ConnectionException: could not establish a connection to one of the following addresses: [locohost:9099]; make sure the "remote-addresses" configuration element contains an address and port of a running TcpAcceptor
[ConnectionException: could not establish a connection to one of the following addresses: [localhost:9099]; make sure the "remote-addresses" configuration element contains an address and port of a running TcpAcceptor]
Tangosol.Util.Daemon.QueueProcessor.Service.Peer.Initiator.TcpInitiator.OpenConnection() +1222
Tangosol.Util.Daemon.QueueProcessor.Service.Peer.Initiator.Initiator.EnsureConnection() +92
Tangosol.Net.Impl.RemoteCacheService.OpenChannel() +17
Tangosol.Net.Impl.RemoteService.DoStart() +377
Tangosol.Net.Impl.RemoteService.Start() +87
Tangosol.Net.Impl.SafeService.StartService(IService service) +745
Tangosol.Net.Impl.SafeService.RestartService() +202
Tangosol.Net.Impl.SafeService.EnsureRunningService(Boolean drain) +148
Tangosol.Net.Impl.SafeService.Start() +78
Tangosol.Net.DefaultConfigurableCacheFactory.EnsureService(IXmlElement xmlScheme) +407
Tangosol.Net.DefaultConfigurableCacheFactory.EnsureCache(CacheInfo info, IXmlElement xmlScheme) +40
Tangosol.Net.DefaultConfigurableCacheFactory.ConfigureCache(CacheInfo info, IXmlElement xmlScheme) +82
Tangosol.Net.DefaultConfigurableCacheFactory.EnsureCache(String cacheName) +236
Tangosol.Net.CacheFactory.GetCache(String name) +21
Default.PageLoad(Object sender, EventArgs e) in d:\21362\projects\OCTest1\Default.aspx.cs:19
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35
System.Web.UI.Control.OnLoad(EventArgs e) +99
System.Web.UI.Control.LoadRecursive() +50
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627
please give solution for this...
Tx in advance...

Is this a type-o, or is "locohost" specified in the remotes-addresses configuration element?
/Mark J

My ipad says it isn't charging while connected to my computer. What's wrong?

For some reason my ipad doesn't charge while connected to any of my computers. It isn't the cord because it charges through the wall by itself as well as on my keyboard dock. Any ideas?

http://www.apple.com/batteries/ipad.html
Charging Tips
The quickest way to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter. When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode. Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.

I have created my apple id.Now when I m downloading any app it is asking my credit card details again forget that I hv made multiple payments while trying to download the app but the app is not getting downloaded.It is sowing the msg cant connect to itune

I have created my apple Id.Now when i m downloading any app it is asking my credit card details.I have made multiple payments while trying to download the app.But the app is not getting downloaded,it is showing the message cannot connect to the i tune store.What should i do to download the applications.

Ok, first of all don't keep purchasing the application, and if you've purchased it multiple times, contact iTunes billing department immediately. They SHOULD only send one actual confirmation in and the rest of the "pending" charges will drop off (how long that takes is up to your credit card company, not iTunes), but you should be sure.
Second, sometimes when they are uploading a lot of new stuff at certain times it can cause the store to screw up, or any number of other reasons could be a factor why you can't connect to the iTunes store, be it on their end or on your end even. Wait a little bit and try again via "Check for available downloads" or via your "Purchased" option on the iTunes store main page.
IF the app you purchased isn't there and you are sure your credit card was charged, then you will need to contact iTunes to find out why you can't download the app.

My ipad is not charging while connected to any device via usb cable

my ipad is not charging while connected to any device via usb cable

If you mean that you've connected it to a computer's USB port then a lot of computers don't provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.

My Ipad 2 is not charging or connecting to the pc after updating it to IOS 6.1.3

My Ipad 2 is not charging or connecting to the pc after updating it to IOS 6.1.3, what shall I do ?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

TS1492 While Syncing my phone it get hung up attempting to connect to the iTunes store. Trouble-shooting states that I do not have a secure connection to the iTunes store.

While syncing my phone, it get stuck at step 3 while connecting to the iTunes store. Trouble-shooting states that I do have an internet connection but not a secure connection to the iTunes store.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Ipad not getting charged while connected to the laptop

Similar Messages

Maybe you are looking for