IPad not keeping time correctly

Last night I noticed my iPad is not keeping time. It said 9:40 at 10:30pm. I checked the settings and it didn't correct itself. It's still off today. Anyone else have this problem? I don't want to manually set the time. I read on another board that Apple was replacing iPads with this problem.

This happened to me a couple of days ago when I charged my ipad with the adaptor and did not synch with my imac. After synching with my Mac the time was corrected but after a day the clock 'drifted' again. I reported fault to Apple and they suggested a reset using 'Settings'. Did as instructed and so far OK. I am no 'expert' in these matters but not synchronising for a couple of days seems to cause a problem. Apple should be aware of this and I have sent a comment back to them

Similar Messages

Windows 8.1 will not keep the correct time on Dell PC - Clock worked fine when the machine had Windows 7 as OS.

I can set it manually or by Internet time sync but it does not keep time or update again from the Internet automatically.
Another real time wasting feature of Windows 8? Gosh Microsoft, I really need to get some productive work done!

Hi,
Meanwhile, you can also re-register time service in your Windows 8.1 system as a test
Open commmand prompt
In the Command window type net stop w32time
Type w32tm /unregister
Type w32tm /register
Type net start w32time
Check whether the time in your BIOS is correct.
If the Windows 8.1 and Windows 7 use different machines, and this issue only happened after you shut down your Windows 8.1 machine, then it might be the CMOS battery issue in your Windows 8.1 machine, you can consider to change a cmos battery.
Yolanda Zhu
TechNet Community Support

Iphone not keeping time properly

Has anyone had a problem with their iphone not keeping time properly. I have noticed periods during which the iphone's clock is 30-60 behind real time. This problem goes away if I restart the phone but I find that to be an inconvenience. I first noticed this when the alarm did not go off at the proper time
Thanks

I had this exact same problem, on three of the five iPhones I have had replaced by Apple (yeah, great product). Resetting never corrected this issue with me. If it did, it would immediately start messing up again. To correct this, just turn off the automatic time setting. That has worked for me, so far.

My clock in the menu bar will not keep time.

My clock in the menu bar will not keep time.
However, if I click on it and open Date & Time and do nothing more, it adjusts to the current time but still doesn't work as the seconds aren't advancing. I close Date & Time but the clock stays highlighted/selectted, which is also strange.
Any suggestions as to how to get my clock running again?

Hi Peter,
Not certain, but I'd try this...
You've probably got a couple of corrupt preference files.
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions...
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/<yourname>/Library/Preferences/ com.apple.systemuiserver.plist
/Users/<yourname>/Library/Preferences/ByHost/com.apple.systemuiserver.xxx.plist
where 'xxx' is a 12 digit (hexadecimal) numeric string.
This will reset your Menu Bar to the default, you'll need to go through System Preferences to reset the ones you need. (If they are already checked, uncheck them first and then recheck them).
reboot

K7N2GM-L: Not Keeping Time in XP

This is the system in question, the one in my sig is my own system replacing my old system which I rebuilt for someone else:
MSI K7N2GM-L
768MB DDR 333 Ram (Kingston CAS-2.5)
AMD Athlon XP 2000+
On board sound
Sapphire Radeon 9200SE
LG 48x Combo Drive/DVD Reader
Western Digital 120GB 8MB Cache ATA100 HDD
Sony Floppy Drive
The problem is it seems as soon as they turn the PC off it loses all track of time (I wish when I goto sleep time would stop, lol) when the PC is turned back on and boots to windows the time is reset to when it was turned off. Having to sync the time everytime windows boots is rather annoying. This is my second replacement of the same board, the BIOS is set to the right time, the CPU is even underclocked to 100mhz bus, and the clock doesn't keep even with the proper clock. I have reset the bios to default and nothing happened.
I have read on many forums and websites that it could be one of 4 things:
1.) As motherboards get cheaper componants are of a lower grade and do not keep time right.
2.) Power Supply
3.) CMOS Battery
4.) Motherboard bad
(1) Motherboard was cheap
(2) Powersupply worked flawlessly when I had it and I had more devices, and it was tested with a multimeter, with proper voltages being read.
(3) well since this is a brand new mobo, 2nd of its kind, 1st not keeping the time either, battery being the fault is doubtful
4.) again since this is a new board, replacement at that, doubtful
Is a format in order here?
Any help would be appreciated, It is always nice to have more heads working on a problem.
Thanks
Jeff

Hi,
Badge: AFAIK, the clock on your motherboard should run for as long as the battery powers it. So even after a couple of days applying no power (except battery of course) your clock should be reasonably accurate.
This is a bit of a mystery, as you say it's occured with two motherboards!? It may be worth your clearing the CMOS. (If you haven't already done so - It can't hurt).
First, power down and set your FSB jumper to SAFE (100Mhz) setting. Then follow the instructions given here:
Clear CMOS guide
...follow the instructions as closely as possible - you might also like to remove your battery as an extra precaution.
Given a problem like this your first port of call would usually be battery replacement, have you tried this? I don't think it's the battery as your BIOS seems stable - but it could be - you never know!
You've not reported any other BIOS problems - does it keep its settings?
If none of this works and you've tried switching off "Spread Spectrum" in the BIOS I would assume that there is a fault somewhere. Exactly what it is though - is a mystery!
Axel

IPhone not keeping time

I have the iPhone update 1.1.2
I synch on my XP Pro laptop through iTunes.
I've noticed in the last few days that my iPhone isn't keeping time properly.
Checking *Settings > General > Date & Time* I have *Set Automatically* set to On, and Calendar is set to *Time Zone Support > On*. Finally, *Time Zone* is set to *New York* (I live in Rochester, NY).
As the day goes on, the phone seems to lose hours. If I go and turn off the settings outlined OR shut down the iPhone and restart, the time updates properly.
The signal for AT&T wireless is fine - always available.
I can turn *Set Automatically* to Off, but this is only a workaround for something that should be happening automatically (and has worked in the past).
Any ideas? I've searched the forum and not found anything about a solution or anyone else with exactly the same problem.
Thanks!
Brian

I had this exact same problem, on three of the five iPhones I have had replaced by Apple (yeah, great product). Resetting never corrected this issue with me. If it did, it would immediately start messing up again. To correct this, just turn off the automatic time setting. That has worked for me, so far.

Computer not keeping time

Hey guys,
What can cause a computer in a domain not to keep time?
All other computers and the Domain Controllers have the correct time, but for some reason 1 computer is moving slower than the rest.
How can I fix this?
Thanks,

Is windows time service started ?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

My 5th Gen iPod touch does not keep time and the bluetooth will not turn on. Full restore did not fix.

Recently my 5th generation iPod Touch stopped keeping time. As long as the screen stays on, it will stay accurate, but once it "sleeps" the time reverts to the last accurate time it had. If I go to Settings>General>Date&Time> and turn Set Automatically off and on, it will catch up, but just for as long as the screen stays on. Not too friendly for battery life that way. Also, maybe unrelated, the Bluetooth function will not turn on. When I try to turn it on, I just get a constant spinning wheel.
I have tried everything from a simple restart to a full device wipe back to factory default. No change. I took it in to the Genius bar this afternoon. They tried a diagnostic and another wipe. Then they said they didn't know and I could pay $150 to replace it. Not a bad deal, but not what I wanted to hear.
Any ideas?

All I can suggest is
Try DFU mode and then restore again to factory settings/new iPod
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If still problem that means a hardware problem

Touch 2G Clock does not keep time

I reset the time and the next time I turn the Touch on, the clock resets back to some time in August. I have done this dozens of times. What am I doing wrong or is it a firmware bug?

I am having this same problem. I ordered my iPod Touch 2G 16 gig on 08/21/2008 and received it on 09/25/2008. I was very excited to receive it all week. Friday I took it to work and listened to it all day. And now my clock continues to reset itself. It resets it date too. Just now this morning the date and time was reset to June 30, 2008 3:44am. I absolutely love my touch however I am very very disappointed by this flaw. I am amazed that Apple has produced such a great product that has the accelerometer and internet surfing capabilities yet the product cannot keep time. This is ridiculous! If this is not fixed soon I may never buy another iPod again.

My iPhone 5C does not keep the correct time.

The Time randomly changes by hours and minutes. This morning it was off by 3 hours plus some minutes. I am in the correct time zone and the Date & Time is set to Automatic; Time Zone is New York. I have another iPhone 5c in my house hold and it does NOT experience the same issue. Both iPhones are using the same Apple ID. I have not reset the phone yet because I will lose all previous text messages etc. I m also not able to connect to yahoo mail when the time is off and I am forced to send Text messages as opposed to iMessage, which has caused problems with my contacts NOT being able to text me. This is a huge inconvenience. I am on AT&T. I went to their Corporate store today and they told me they were unable to assist me, that I need to take my phone to an Apple Store. This is not acceptable. The nearest iPhone store is more than 30 minutes from my work AND home. I work late hours and it is very difficult to have to deal with this type of an issue. Please assist.

JRoet wrote:
The Time randomly changes by hours and minutes. This morning it was off by 3 hours plus some minutes. I am in the correct time zone and the Date & Time is set to Automatic; Time Zone is New York. I have another iPhone 5c in my house hold and it does NOT experience the same issue. Both iPhones are using the same Apple ID. I have not reset the phone yet because I will lose all previous text messages etc. I m also not able to connect to yahoo mail when the time is off and I am forced to send Text messages as opposed to iMessage, which has caused problems with my contacts NOT being able to text me. This is a huge inconvenience. I am on AT&T. I went to their Corporate store today and they told me they were unable to assist me, that I need to take my phone to an Apple Store. This is not acceptable. The nearest iPhone store is more than 30 minutes from my work AND home. I work late hours and it is very difficult to have to deal with this type of an issue. Please assist.
Doing a reset, does not cause you to lose data, however a restore as new will.
a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
If that doesn't work restore from your backup, if that doesn't work restore as new. If that doesn't work, then schedule an appointment with the Genius bar and take trip to the Apple store.

We have an iphone 5c that is not keeping the correct time whether using the auto update or manual selection. is this a os bug?

iphone 5c is not updating its time properly using set automatically. is this an os bug?

Hi TheLongRider,
Thanks for visiting Apple Support Communities.
I recommend this advice if the incorrect time is being set automatically:
Follow these steps. Test after each step to see if the issue is resolved.
Ensure that the version of iOS on your device is up to date.
If the option to enable date and time automatically is available, turn it on. Tap Settings > General > Date & Time.
Ensure that your time zone is set up correctly. Tap Settings > General > Date & Time > Time Zone.
If the incorrect date, time, or time zone is being set up automatically on the device, please notify your cellular provider. In the meantime, tap General > Date & Time and turn off Set Automatically. Then set the appropriate time and time zone manually.
If you are setting the time manually and it is still incorrect, this advice may apply:
Note: If you find that your device's time is incorrect after you sync with your computer, your computer's time may be incorrect. Verify the computer's time in System Preferences > Date & Time (you may want to select the checkbox to set the computer's date and time automatically).
You can find this information here:
iOS: Troubleshooting issues with date and time
http://support.apple.com/kb/ts3920
Cheers,
Jeremy

Why does Ipad not keep photos in there correct order ie: img_001, img_002 an so on even though thats the way they are in the folder

The folder that they are in is in the correct order but when i add them to Ipad they are all mixed up. This is so annoying when i am trying show someone there Wedding Album in the correct order

From http://support.apple.com/kb/HT4221 for iOS 5 :
If you are not using iPhoto or Aperture on Mac OS X, and if your device is using the latest software, it sorts photos in ascending order by the Date Modified.
So you will need to amend the date modified field on your computer and re-sync to get them into the order that you want - or use a third-party photo management app instead of Photos e.g. Photo Manager Pro which allows more control of your photo sorting within it e.g. by name, size, date, or you can drag them into a different order

IPad not linking to correct Skype account

I have a premium Skype account and just purchased a new iPad and downloaded the Skype app but it did not link to my premium account and I can't seem to correct this even when I log in with the correct user information. I spent over 90 minutes on chat with Skype and they could not even figure out what my question was (very sad) but since I already paid for this, I would like to use it. Any ideas here?
Thanks!
sb

HI,
The lInkedButton always links items to the Primary Key.
It means, that the documents the DocEntry field is linked! Not the DocNum !
If you have a multiple document numering, or more series defined over the same time/period/year, you have to cover the linkto property by the following:
execute the following query to check the DocEntry and Docnum field:
SELECT * FROM NNM1 T0 WHERE T0.[ObjectCode] = '22' -- Document numbering
select DocNum, DocEntry from OPOR -- DocNum and DocEntry relationShip
Select * from
So do the following:
1. Create an EditText for DocNUm and DocEntry
2. Hide the docentry textbox (left = -20000)
3. Set the linkto Property into the DocEntry Item ID
4. USe CFL to get the DocEntry and DocNUm field values (use can use database field names getting the value when you receiving data from chooseFromList Event
Now you are correct.
Regards,
J.

Ical monthly view on ipad not showing time

My ical preference from my laptop is not carrying over to ipad. How can I get ical (in monthly view) to show appointment time withou

No, the appointments will not "get messed up". If you leave time zone support off the calendar will stay exactly as it was at home. If you turn on time zone support for the new time zone you're in ( or other country ) the appointment times will change or convert to times and days in that zone or country. When you turn off time zone support after returning home it'll all convert back to that time zone.
Example. You have an appointment (10am Thursday) with Joe in your hometown in Chicago. On Tuesday you fly to Tel Aviv and switch Time Zone Support on for Tel Aviv. The calendar will show the upcoming appointment with the newly converted time and date in the calendar. At that new time and date of the appointment it'll be 10am Thursday back home.

Problem with waveform chart: time scale does not show time correctly

Hello,
I have some problems with a chart.
I want to display some data and the time between two single data can vary. It is something between 50ms and 500 ms.
The problems I have:
1. The time is not shown correctly in the chart (allways 2:00:10 instead of the current time)
2. the data points in the chart have a distance of 1 s (x-scale). That is not correct.
I have tried several things but I thinkt I am on the wrong track.
Could you please help me?
Johannes
LabVIEW 7.1 (!)
Message Edited by johanneshoer on 10-14-2009 04:26 AM
Greetings Johannes
Using LabVIEW 7.1 and 2009 recently
Solved!
Go to Solution.
Attachments:
Chart Test.vi ‏55 KB

I have modifierd the vi again.
Now it looks much better.
I have a data array and the last 10 seconds of the data are displayed.
The array size is maximum 150 and that is more than I need to display. If new data is inserted, the oldest gets deleted.
I wonder if this style is efficient?
The time is stil not displayed correctly in the graph. Why does it always show 2:00:00 ?
Johanens
LabVIEW 7.1
Greetings Johannes
Using LabVIEW 7.1 and 2009 recently
Attachments:
Chart Test 3.vi ‏57 KB

IPad not keeping time correctly

Similar Messages

Maybe you are looking for