IPad not rendering WebI bar chart very well

dear all, I have a simple webi document with a bar chart.
in the webi, my Category Axis is "month", my Value Axis is "Sales", and region Color is "Company".
in the webi it all looks good, but the iPad representation has a problem displaying the Companies.
on the iPad along where the month goes (along the x axis), the companies are all grouped together, then i get each month.
here's and example of what i mean for the month of 1/2001 and 2/2001. the letters a,b, and c, are indicative of the three companies, and the nnumbers are the sales bar colours, 1 is red, for company a, 2 is blue, for company b, and 3 is yellow, for company c, let's say.
on the webI, each month would look similar to this
1                         
1 2                       1
1 2 3                     1 2
1 2 3                     1 2 3
1/2001                    2/2001 (x axis)
on the iPad, the company is displayed, on the x axis, unlike the Webi document, where the month should is, then above the company you have each months measures, in the example below you can see that the months are grouped with the company
1
1 1   2      
1 1   2 2   3
1 1   2 2   3 3
a a   b b   c c  (x axis)
so you see, from this, i  would get, working from left to right, company 1, month 1, 2, ...., then company b, month 1, 2, ..., then finally company c, month 1, 2, ... and so on.
this example is rather difficult to see here, but i hope someone has encountered this problem and can advise.
i can send screen shots so anyone, which may help.
thanks
g

Hi Glen,
not sure if i got the Example completely right - you're using the SAP BI Mobile App?
However, according to the recent "Mobile Release Notes 4.0.1", Column Charts with multiple Dimensions are not supported yet.
In General, the capabilities of the App are still relatively small. I Would recommend you the above mentioned Document, which contains a complete list of limitations.
Regards,
Bodo

Similar Messages

  • I would like to be able to clip out a rectangular section of any screen on the iPad (not just web pages)

    I would like to be able to clip out a rectangular section of any screen (not just web pages and not just text pages) on the iPad and then email that clip or send it to Evernote or whatever.  I can't find any means of doing this.  I know how to take full screen shots and crop, but that's a poor solution.
    Thanks for any suggestions you may have.

    That is not a feature of iOS and no 3rd party app would be able to do that. You're going to need to continue taking a full screen shot and cropping it.

  • Ipad 3rd generation does not seem to handle photos very well.  I have a ipad 2nd and iphone 4s, and they both are able to handle photos that my Ipad 3rd can not.

    So here is my experience.  When I first aquired the IPAD 3rd, I did the normal sync with Itunes (windows) and found that very few of my photos came over.  Even though these were the same photos that are on my IPAD 2nd. Same for my phone 4s.  After much consternation, I was able to get photos on the IPAD 3rd, by identifying photos which could not be synced.  These "problem" photos sync fine with my ipad 2nd and iphone 4s.   There is also another issue with IPAD 3rd.  There are photos that take 5-10 seconds or so to "focus".  Even though the focus issue is not apparent on my other devices (ipad 2nd, iphone 4s and windows computer).   The other related issue is with the sync. process.  Syncing photos will quit the entire sync. operation when it encounters a problem photo (with no errors), rather then skipping the bad photo and moving on.  I analyzed some of the problem photos and could not identify any single issue - there are all a little different.  For example one was the result of changing the format options from optimized to standard... but this was not always the case. Others were chaning the format from "Exif JPEG" to "JPEG". while others I could not ever get to sync. In all cases I did a save as using various options.    However, the bottom line was that all of these same photos sync fine and view fine on my ipad 2nd and iphone 4s.   I have not yet figured out what is causing the issues with focus delays.   I use an olympus pen camera (12 meg resolution).

    This works!
    go to settings> general>restrictions>privacy and allow changes.  Make sure that your camera is on under allow!

  • Color Highlights not working in bar chart with two data points

    Iu2019m using Crystal Reports 2011.  I have created a bar graph using two data fields in the Chart Expert.  I have set the colors for the bars in the Color Highlights tab, but the colors that I have defined have not been applied to the graph.  
    I have tried changing the colors numerous times and have done it in both design and preview modes.  It seems to be somethign with having two data points because I don't have this problem when using just one data point.  Please help!

    is the colour mode Color by group or color by series

  • Chromebook 14-x050nr Not Rendering Web Page Correctly

    My new 14-x050nr does not render the following web page properly:
    http://cloud.collectorz.com/opus1269/books
    Near the top left of the page are labels "Author" and "All".  Left clicking on them should display a drop down menu for further selections. This does not happen.  There are several other labels on the page with drop downs and none of them work.
    I talked to my brother who has an older model ASUS Chromebook and the page functions correctly. Also works correctly on my Windows 7 laptop.
    I tried the following on my Chromebook without success:
    Logging in as guest
    Reset Settings
    Powerwash
    Switching to the Beta Channel
    Here is some further info. on my box:
    Model: 14-x050nr
    PN:        J9M96UA#ABA
    SN:       [Personal Information Removed]
    Chrome OS
    Version 39.0.2171.96
    Platform 6310.68.0 (Official Build) stable-channel nyan_blaze
    Firmware Google_Nyan_Blaze.5771.63.0
    If anyone else has this model I would appreciate if you could try the link and see it it works for you.
    Any other suggestions would be appreciated.

    Hello @opus1269,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your Chromebook is not able to render a certain webpage: Collectorz.com properly, and I would be happy to assist you!
    To further diagnose this issue, i recommend taking a look at this document on Changing the Chrome Web Browser Settings on Your HP Chromebook or Chromebox (Chrome OS). This should help to make the web content from Collectorz.com more accessable on your browser. If the issue continues, I recommend contacting Collectorz.com Customer Support for further assistance with their website.
    If their site is functioning normally on your installed browser, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • My iPhone 4s and my IPad Air doesnt Sync with iCloud very well

    they just dont work as they supposed to. They don't sync my contacts well neither my bookmarks or my list of reading. This is annoying me so much.
    So, any help please?
    p.s.: I've tried to turn off safari and contacts sync, turn off the devices and turning them on and Safari and contacts too, still don't work well.

    Hey Matheus M. Jeronimo,
    If you are having issues syncing your iPad Air with iCloud, I would first suggest updating your iOS to the most recent version.  Here are some troubleshooting resources for contacts, bookmarks and reading lists.  Click on the links for complete details.
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
    http://support.apple.com/en-us/HT204204
    Get help using iCloud Contacts - Apple Support
    http://support.apple.com/en-us/TS3998
    Get help using iCloud Bookmarks and Reading List - Apple Support
    http://support.apple.com/en-us/HT203519
    Hope this helps ...
    - Judy

  • Ipod does not play sport highlight videos very well.

    When I try to view sport highlights from ESPN the video stops and the audio keeps going.  Can the performance be improved?

    I have this problem as well. The 1.1 upgrade was supposed to fix this problem but it didn't. Hopefully Apple will address this issue.

  • New to Mac: My Macbook Pro does not power on and off very well.  It freezes in the never ending circular swirl.  I have to hold down the power button to get a "reset."  I have updated software

    New to Mac:  My Pro does sleep, power on or power off consistently or efficiently.   It freezes into a  never ending spool.  I have to press down the power off button to reset.  I have updated my software.

    If this is a new MacBook Pro, and you're within 90 days of purchasing it from Appe, contact Apple support. In the US it's (800) APL-CARE (800-275-2273)

  • BEX map does not represent data, neither as hue nor as circle or bar chart.

    Hello together, I hope myself can someone help.
    Under the Web Application designer (WAD), release 2004s, support Package 12, Patch 1, revision 314, I get the pure map of the world in the report only indicated.
    If I select care in the Web Item of the Item "map" as renderer value bar chart [BAR], then I get only one legend indicated and otherwise nothing.
    Same applies also with the pie chart. A test, where I all countries with those data available are not in a sharp blue indicate let, I get in the Web report the map of the world indicated where all countries blue colored am.
    With the counter proof with the WAD finally release 3,5 functions it with to same DATA perfectly the Provider. Also the bar charts are indicated.
    The associated of characteristic info object is duly maintained as info object with static geo characteristic. The shapefile DBF is maintained and into the BDS high-loaded also with the appropriate, adapted SAPBWKEY (which proves a functioning in the 3.5er WAD).
    Super would if be someone a solution would have.

    As this is a configuration issue and not a programming issue I' moving your question to a more appropriate forum where you're more likely to find assistance.
    Cindy Meister, VSTO/Word MVP,
    my blog

  • Sprucing up 3-D bar charts

    If you use bar charts very often, you've probably noticed that the appearance of bar charts can be enhanced by selecting a 3-D look (and maybe even better with the inclusion of a shadow). Another option is to include bar's value as a label on the individual bars themselves, instead of just relying on the vertical scale at the left of the chart. You can enhance the look of those labels as well, by giving each label it's own shadow.
    Make sure the "Legend" is displayed on the chart, and "Label Data" is active in the various "Chart Options" dialog. Close the dialog and click on one series in the chart's legend (a small white circle appears in the middle). At this point you can change the color of that bar, the color of it's edges, and the color of the bar's label "text" -- all independent selections. If you now command-click on the series marker in the legend, a text shadow is toggled for the label on that series bar. If you option+command-click on it, you get not only a drop shadow, but a highlight, as well.
    The pie chart labels behave in a similar fashion.

    If you can create a view, that would be very helpful, by making the view, you are pushing some of the work to the
    server, so... "Hopefully" the report will be quicker. I don't think making six seperate charts would be all that much load on the
    server, or cr. If you do that, would you stack the charts? and just make the top stacks with Transparent backgrounds?
    Rather than add a view on the server u2013 there's talk that the next version of the gradebook program will completely refactor the database u2013 I did a SQL Command (I can't remember where I read about that tip over the last couple of feverish days, but my hat's off and I owe someone a frosty adult beverage!) that created a simplified table.  I then used that to create a Cross-Tab (my original report approximated one using a whole bunch of Running Totals).
    I then tried to make the chart, and got completely frustrated u2013 again u2013 until I accidentally created a chart from the Cross-Tab (right-click on the Cross-Tab and choose Insert Chart ).  I had no idea you could do that, and it ended up being exactly what I wanted.
    I have CRXI, if you go to the Sample reports, you will see one called Chart.rpt, this has multiple examples of some of the
    charts you can create. Perhaps a 3D riser chart would meet your requirements. HTH If not, can you provide some different samples?
    I would have never thought to look for the samples.  Thank you!  Now that I've got my immediate problem solved it's time to look at the samples and see what possibilities exist for future reports.
    Jim

  • I5Chart not rendering

    Hi all,
    I am trying out UI5 examples. i5Grid is working but i5Chart is not working.
    Is there anything missing in i5Chart?
    Code:
    <HTML>
    <HEAD>
    <TITLE>MII 14.0 SP04 HTML 5 Example</TITLE>
    <META http-equiv="X-UA-Compatible" content="IE=edge">
    <META http-equiv='cache-control' content='no-cache'>
    <META http-equiv='expires' content='0'>
    <META http-equiv='pragma' content='no-cache'>
    <SCRIPT type="text/javascript" src="/XMII/JavaScript/bootstrap.js" data-libs="i5Chart,i5Grid"></SCRIPT>
    <SCRIPT language="JavaScript">
    var test = new com.sap.xmii.grid.init.i5Grid("Demo/Display Template/GetNotificationNumber_iGrid", "Demo/Query Template/Get_NotificationNum_SQLQry");
    test.setGridWidth("640px");
    test.setGridHeight("400px");
    test.draw("div1");
    var test2 = new com.sap.xmii.chart.hchart.i5Chart("Demo/Display Template/GetData_BarChart", "Demo/Query Template/GetPLCData_PCoQry");
    test2.draw("mydiv");
    </SCRIPT>
    </HEAD>
    <BODY>
    <table>
    <tr><td><DIV id="div1"/></td></tr>
    <tr><td><DIV id="mydiv"/></td></tr>
    </table>
    </BODY>
    </HTML>
    MII version: 14.0 SP4 Patch 3
    Thanks,

    Hi,
    I tested PCoQry its returning data.
    I tested the same in html/applets and its rendering the bar chart.
    Log message:
    Script console debug logs(INFO/LOG level) allowed: false i5Chart.js:1
    2014-05-06 14:12:29 lazy stub for 'sap.viz.ui5.data.FlattenedDataset' (constructor) called. -   sap-ui-core-dbg.js:13544
    2014-05-06 14:12:29 lazy stub for 'sap.viz.ui5.data.DimensionDefinition' (constructor) called. -   sap-ui-core-dbg.js:13544
    2014-05-06 14:12:29 lazy stub for 'sap.viz.ui5.data.MeasureDefinition' (constructor) called. -   sap-ui-core-dbg.js:13544
    Uncaught SyntaxError: Unexpected token u BarChart.js:1
      com.sap.xmii.chart.ui5.BarChart.create BarChart.js:1
      b i5Chart.js:1
      K i5Chart.js:1
      h i5Chart.js:1
      update i5Chart.js:1
      draw i5Chart.js:1
    (anonymous function) UI5_Ex.html:19
    2014-05-06 14:12:29 FocusHandler setup on Root undefined -  sap.ui.core.FocusHandler sap-ui-core-dbg.js:13544
    2014-05-06 14:12:29 ThemeCheck: Check styles 'sap-ui-theme-sap.ui.core': true/true/true -   sap-ui-core-dbg.js:13544
    2014-05-06 14:12:29 ThemeCheck: Check styles 'sap-ui-theme-sap.viz': true/true/true -   sap-ui-core-dbg.js:13544
    2014-05-06 14:12:29 ThemeCheck: Check styles 'sap-ui-theme-sap.ui.layout': true/true/true -   sap-ui-core-dbg.js:13544
    2014-05-06 14:12:29 ThemeCheck: Check styles 'sap-ui-theme-sap.ui.commons': true/true/true -   sap-ui-core-dbg.js:13544
    2014-05-06 14:12:29 ThemeCheck: Check styles 'sap-ui-theme-sap.ui.table': true/true/true -   sap-ui-core-dbg.js:13544
    2014-05-06 14:12:29 ThemeCheck: Check styles 'undefined': true/false/false -   sap-ui-core-dbg.js:13544
    2014-05-06 14:12:29 ThemeCheck: Check styles 'undefined': true/false/false -   sap-ui-core-dbg.js:13544
    2014-05-06 14:12:29 ThemeCheck: Check styles 'undefined': true/false/false -   sap-ui-core-dbg.js:13544
    2014-05-06 14:12:29 lazy stub for 'sap.ui.core.CustomData' (constructor) called. -   sap-ui-core-dbg.js:13544
      Attr.specified is deprecated. Its value is always true. sap-ui-core-dbg.js:2631
      32
      Uncaught TypeError: Cannot read property 'createDataSet' of undefined i5Chart.js:1
      updateUI5ModelAndDataset i5Chart.js:1
      refreshData i5Chart.js:1
      (anonymous function) i5Chart.js:1
      (anonymous function) i5Grid.js:1
    Thanks,
    Shridhar..

  • Horizontal Cluster bar chart

    I am tasked by my PHB to produce a horizontally-stacked bar chart, the horizontal axis is for simple numbers of events, the bars are types of events. It should also have a negative 'reflection' (see drawing below) There is no Z axis. I have successfully generated this as a vertical stacked bar chart (very simple) and I think a simple rotate 90 degrees right would do it, but I can't find one.
    It should look like this, ignoring the dashes:
    ######## ######## Event 1, Value 8
    ----###### ###### Event 2, Value 6, etc
    Any ideas or workarounds welcome!
    Keith Templeman
    EDIT Post to refer to a horizontal cluster bar chart which is what I really want
    Edited by: mansfields on Dec 3, 2008 2:44 PM

    The horizontal equivalent of the vertical stacked bar would be a horizontal stacked bar, which is there on the menu for me to see. As said in my previous post 'what I am after is the horizontal equivalent of the vertical cluster bar'
    To repeat what my requirement is, I have a group of sales people who have five measures each against them, and I can already graph them thus:
    6 5 4 3 3
    but I want to graph them this way, like 90 degrees rotated to the right:
    6 ######
    5 #####
    4 ####
    3 ###
    3 ###
    I think this would be called a horizontal cluster chart, and there is no option on the list that is called that.
    Hope this makes it clearer, and thank you very much for your time and effort so far.
    keith
    EDIT
    From the online books section - "you can only display clustered bar charts in vertical format". That sorts that out then.
    Edited by: user10677133 on Dec 3, 2008 5:16 PM

  • Themed Transitions not rendering in export to Quicktime

    I just created my first imovie 09 project. I was using the Bulletin board theme and the transitions work fine with viewing in iMovie. However, when I *export out of imovie to quicktime or itunes not all the transitions render.* Especially the bulletin board transition. There are some other "standard" transitions that are not rendering either.
    I am wondering if this is a bug or if maybe it is the settings like Frame per second and encoding that is some how cutting these transitions out. Since most of the transitions do render out to quicktime, I am going to guess this is a bug.
    Anybody have a clue?

    The file information shows:
    Apple MPEG 4 Decompressor, 960 x 540, millions 16bit, 29.97 fps
    I just watched the rendered quicktime again and noticed that some of the Bulletin board transitions did render later in the movie but at least one transition is not rendering. It is very strange and bit frustrating.
    I am not sure what it could be since it shows in the imovie full screen preview.

  • Not rendering - Getting dropped frames when exporting to tape

    I am trying to export my project to Mini DV tape. I have been successful before, but am continually getting dropped frames. I noticed that the sections that are getting dropped frames are showing that it is not rendered (red bar). I have tried rendering them several times, but still show the red bar. I am using a PowerMac G5, Dual 2 GHZ processor with 3GB RAM. The footage is on a Lacie Firewire 800 external hardrive and there is almost 200 GB of free space. I do get occasional dropped frames, but not as often as I am now.

    Is there anything else I can do? When I get the Warning - Dropped frames, it suggests turning off "Unlimited RT", which I have and set to "Safe" because I was getting dropped frames. Will this affect the quality when exporting? I have set the Video Quality to "Dynamic" and Frame Rate "Full" and Record "Full Quality". Do any of these settings need to be changed? Lowering your compression data rate (I'm not sure what that is), Closing open sequences (which I've done), Lowering the preference for real-time audio tracks (how do I do that and again will it affect the quality?), Increasing the speed of your system and/or disk drives and/or network connection (Is there a way for me to do that?)

  • My Ipad works very well by itself but it's not recognized by Win 7 and Itunes on my PC and my PC's wife.

    My Ipad works very well by itself but it's not recognized by Win 7 neither Itunes of my PC and my PC's wife.
    The Ipad of my wife is well recognized on my PC which means my PC is OK.
    I restored everything of my IPAD but when I connected it to Itunes of my PC nothing happened.
    What does that mean and what to do ?

    See if this link helps: http://www.apple.com/support/ipad/assistant/itunes/

Maybe you are looking for

  • How many times can I install Logic Pro?

    I need to re-install Logic Pro 8 on my computer but I hear there is a limit to how many times you can do so. Anybody know what the limit is?

  • How can i install Lightroom on a second computer?

    I've been using Lightroom on my PC for years (NOT the CC version).  I want to install it on my laptop so i can use it while travelling.  I believe that the license allows for that. But how do i install it? When i try to do it from the website it take

  • RichDialog doesn't close with exception handling in DialogListener

    I have a RichPopup with a child that is a RichDialog. The popup is called using a command button with a showPopupBehavior child. I have a DialogListener on the RichDialog that calls a web service method through a proxy. I added a try/catch block arou

  • Message check for parked Document

    Hi All, In Funds Management I have a scenario in which budget check is activated for parked documents. When documents are parked with values less than the budget, information/ warning message is to be raised. I could see that the standard functionali

  • Ranking in RH8 Search

    Is it possible to remove ranking from Search?  If not, can you change Search so that when you search by title instead of by rank that it sorts alphabetically across ALL pages rather than by those appearing on each page?