Ipad not seen by itunes, freezes itunes after pluged in

Hello,
I have problems with ipad 2 3G 32GB. It's seen in itunes once 20-30 plugs ins. Have Win7.  Itunes  10.3.1.55. I've tried :
- turn on and turn off ipad
- reset ipad
- restored ipad
- reboot system
- reinstal apple soft
- started windows without any addditional soft (msconfig issues)
- unpluged all other usb devices
- checked cable
Any ideas ?
Thank you
Warszawka

Make sure that you have the latest version of iTunes installed on the Mac. If you do not have it - download it here.
http://www.apple.com/itunes/
You can also update from Software Update as well from the menu at the top of the screen if you like
Sometimes this happens to me and this always works when it happens. Quit iTunes, restart your Mac and if necessary, restart the iPad. If that doesn't  work, you might be able to find some help here.
http://support.apple.com/kb/TS1591
Or if you are running Snow Leopard ....
http://support.apple.com/kb/TS3540

Similar Messages

  • Device not seen in itunes after data transfer

    I bought an original MacBookPro from my daughter & transferred all my data from PB G4 to MBP.
    Everything works just fine, except itunes does not see my ipod touch. I cannot figure out how to get it "recognized" as a device?
    Any suggestions?

    Hello.
    Try the following suggestions below
    1. Perform all Software Updates - Click on Apple logo in top left corner of the OS and choose Software Updates. It will scan the mac and then populate a list of software that needs updating including iTunes if there is any at all.
    2. Connect iPod Touch to another USB Port in the Macbook Pro, If it still does not show up, Disconnect the touch. Reboot the Mac, then reconnect the touch.
    *Link below has extensive troubleshooting steps for iPod Touch not seen in iTunes. Follow one step at a time. Post back if you need further assistance from the community.
    iPod touch not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS2050

  • IPhone not seen in iTunes after Windows XP reinstall

    Hi
    Can anybody please help me with this, I've tried googling the problem and checking the Apple support info but no luck.
    When I plugged my iphone 3GS in, iTunes doesn't see it. (Windows recognises the device.)
    This worked up until I reinstalled Windows XP (service pack 3) onto a new hard drive, and have installed the latest version of iTunes (10.6.3.25).
    I had copied all my data from my old XP installation onto the new hard drive, including my iTunes directory (iphone sync data - apps, music) , so I just pointed iTunes at the directory and it happily loaded all my apps. Note: Version of iTunes was from 2011 - not sure if it was same, I think it was 10-something.
    Note: iphone is NOT jailbroken
    Steps I have already taken:
    - run through all the steps at support.apple.com/kb/TS1538
    - checked that my cable is ok (iphone charges and is recognised by Windows)
    - authorised my "new" computer.
    - tested my iphone - I went into a mac store and they plugged it in and it was picked up by itunes on their computer
    - disabled my virus protection while testing (AVG)
    - uninstalled and reinstalled iTunes, and rebooted my computer
    - confirmed Apple Mobile Device Support (AMDS) is installed, and restarted it
    Has anybody else seen something like this when reinstalling Windows?

    DEVICE NOT RECOGNISED IN ITUNES
    If you have connected your device to your computer and it does not appear in the side bar in iTunes then for Windows computers read http://support.apple.com/kb/TS1538 or if you have a MAC then read http://support.apple.com/kb/ts1591 for troubleshooting steps.

  • IPhoto Albums not seen in iTunes after iOS 6 update

    I upgraded a 3rd gen iPad and an iPhone 4 to iOS 6, then updated my Macbook Pro (2.4 ghz quad core i7, 8GB RAM) to 10.8.2 with the requisite iPhoto update.  Now, iTunes will not show my iPad even though wireless sync is enabled, unless the iPad is connected to the laptop via the docking cable.  Both iPhone and iPad error out on synch with an error 1140 if synching photos is enabled.  Under the photo tab, the button to have "selected albums, events and faces" is grayed out.  So I can only select to sync ALL photos or none.  I believe the error 1140 is stemming from my library being too large to sync to the i-device.  In any case, I can no longer choose certain albums that were enabled under iOS 5.  The area below these options in the Photos tab in iTunes also does not show any albums, where it used to do so in a grayed out fashion even if that option was not selected.  Major issue here.  Have tried all the rebuild and repair of iPhoto library.  The kicker is that both the devices I upgraded have the exact same issue, so I'm thinking this is an update/Apple problem, not an issue with my devices or config.

    Ok, all.  I think I found the problem.  In searching for reports of this issue and solutions I found someone that mentioned they had fixed a similar issue with a "free" program called "iPhoto Library Manager."  The app apparently lets you split a library into multiple smaller ones or combine multiple libraries.  Generally it just "manages" your libraries.  I figured I had nothing to lose so I checked it out.  Turns out it costs $19.99 but they do have a free demo. 
    I launched it and it immediately told me that it couldn't display my library and albums due to an issue with the AlbumData.xml file on line 22155.  I read in the documentation of the app under it's "Help" menu that likely causes were a keyword with a "null" character at the end, or a file path being referenced inside the library that had an ampersand or backslash in it.  The person on the board I'd found had had a keyword issue.
    Anyway, I opened the iPhoto library by showing package contents (right click the file to choose this) and loaded up the AlbumData.xml file in TextWrangler, since that displays line numbers.  I found that line 22155 indeed referenced an mp3 in my iTunes library that had an ampersand in it.  Deleted that line.  Then it said line 22156 had an issue so I deleted that, at which point iPhoto Library Manager instantly displayed all my albums.  I checked iTunes and it too now showed my albums and the option to sync only selected albums was no longer grayed out!
    Per the Library Manager's instructions, I saved the AlbumData.xml file I'd modified.  The app said the iPhoto only writes this file out, it doesn't read it.  However, other apps read it to get your album info, hence the issue.  So I had to go into iPhoto and fix the problem, else the next time I exited the app, it would write the file back out improperly.  I noticed in the xml file that where the song was listed it was also referencing one of my albums.  So when I launched iPhoto, I went to that album and checked the slide show settings.  Sure enough, I had set a custom playlist for that album and listed the song I had seen on line 22155 in the AlbumData.xml file.  I removed that song from the settings, and exited iPhoto.  No more issues!  I appear to be all set!
    Now, I'm not clear if I NEEDED to edit the AlbumData.xml file.  Just looking at it showed the error and then I had to fix it in iPhoto.  So you can probably do that.  However, the iPhoto Library Manager software is the only thing I know of that could show WHERE the error was.  Since the free demo works for this purpose, I'd suggest giving it a shot.  This issue is obviously caused by our individual libraries and is not an Apple issue.  Now, the album that had the problem has existed for almost 3 years and I've never had an issue like this arise before so it's anyone's guess as to why it became a problem now.  Fortunately, it's all in the past for me now, though!
    Hope this helps someone.  Good luck!

  • IPad not seen by iTunes or computer

    Everything was fine as I started to do the software update - I was even reminded to sync the apps I'd bought on the iPad, so iTunes could certainly see it then. Went through all the expected stages to download and install the update, but then I got the 'Connect to iTunes' symbol on the iPad. I tried a different USB port and my iPhone cable in case one of those was the problem but made no difference.
    So I followed the advice at http://support.apple.co./kb/HT1925 and ended up uninstalling and reinstalling everything Apple, which went fine - iTunes started up and recognised that the iPad was in recovery mode, and so I did the full factory reset and ... got the 'Connect to iTunes' symbol again.
    Bit stuck now. Can anyone help?
    Pat

    Go to "C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPad Software Updates" and delete the "iPad1,13.2.2_7B500Restore.ipsw" file. Start iTunes and connect the iPad, iTunes will then re-download the update file.
    enjoy your magic machine

  • IPad mini not recognised by iTunes after updating to iTunes 11.1. All other devices are recognised...

    After upgrading to ios 7, adn iTunes 11, I had some problems with both airplay and having my ios devices not recognised by iTunes. After a few fixes (re-installing Apple Mobile Device support ) manually, all is now looking good, apart from my iPad mini.
    Windows recognises it when I plug it into any of the USB pports on my PC, however iTunes does not see it. The device is recognised by iTunes onother windows and Mac computers I have.
    Is it posible to isolate which driver is being used by the mini, and uinistall it? I guess that if Windows sees the device as a "new one", it will re-install the device driver, and probably fix this issue.

    Hey there BeakyGB,
    Thank you for using Apple Support Communities!
    Great troubleshooting done so far. I would next try this article named:
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    Cheers,
    Sterling

  • Reset my old iPad, now not seen in iTunes devices

    I'm giving my old original iPad to my Dad. Just wiped it using the iPad (settings/general/reset). I used the iPad to set up as a new device. Plugged it into my computer expecting to see it pop up on the iTunes devices section, but it hasn't appeared. However, the old back up for it, which was called OLD IPAD, has disappeared from iTunes devices.
    I want to pick and chose via iTunes the stuff I want to put on for my Dad, how can I get iTunes to see it?

    Look at this link.
    Giving your former iPad to a spouse or family member: the quick guide
    http://www.tuaw.com/2012/03/17/giving-your-former-ipad-to-a-spouse-or-family-mem ber-the-quick/http://www.tuaw.com/2012/03/17/giving-your-former-ipad-to-a-spouse-or-family-mem ber-the-quick/
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814http://support.apple.com/kb/ts1814
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062http://support.apple.com/kb/ts4062
    iOS: "Not enough free space" alert when trying to sync
    http://support.apple.com/kb/ts1503http://support.apple.com/kb/ts1503
     Cheers, Tom

  • My ipod touch is no longer seen by itunes after upgrading to snow leopard

    Just upgraded to snow leoprad and the device is no longer seen by itunes. My old ibook sees it but its itunes is not compatible. Please help...

    Try here:
    Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Ipad not recognized in itunes

    I'm sick of this....iPad is recognized by Windows 7 PC, but not in iTunes. Latest versions of all software - Windows 64 bit, iTunes 64 bit. I uninstall iTunes and reinstall, and it recognizes my iPad, but after computer shutdown and reboot, it's back to the same problem. I thought apple was supposed to be great?

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
     Cheers, Tom

  • HT201412 My iPhone 3 is not seen on iTunes when I connect it. It is also showing low battery but is not even charging and continously showing the Apple logo... What should I do? Thanks in advance, Jahnavi...

    My iPhone 3 is not seen on iTunes when I connect it. It is also showing low battery but is not even charging and continously showing the Apple logo... What should I do? Thanks in advance, Jahnavi...

    Jahnavi,
    two things to be looked upon in this case. First thing is about the battery. Once the battery has enough charge in it we can try a force restore on the phone to re-install the iOS.
    > Try a hard reset of the phone (Press and hold the HOME button and the Sleep/Wake button until the phone restarts and comes up with Apple logo). After trying this step, try charging the phone and see if the battery holds the charge.
    > Once battery has enough charge in it then we can force it to DFO mode and perform restore. For restore refer to this link.

  • Iphone 4s not detecting in iTunes after ios 7.1.2 upate

    My iphone 4s not detecting in iTunes after ios 7.1.2 update, please help
    regs
    sk

    Can you try to connect to another computer?
    DFU mode would be the last thing to try before contacting Apple Support or visiting an Authorized Apple Service Provider or Apple Store.
    iPhone - Contact Support - Apple Support
    iPhone, iPad, or iPod is not recognized by Windows due to driver installation issues

  • IPad not recognized by iTunes

    I have the following problem:
    My new iPad is not connecting to iTunes. When I insert the USB cable I hear the USB-connect sound of windows, but in iTunes nothing happens.
    However my previous iPad and iPhone are connecting without any problems. I followed all the steps in the guide on the Apple Support page, including completely deleting and reinstalling iTunes. Nothing helped.
    My stuff:
    OS: Windows 7
    Itunes: latest version
    iPad with retina display, iOS 6.1 - the new one that will not connect
    iPad 2, iOS 6.1 - connecting without problems
    IPhone 4, iOS 6.1 - connecting without problems
    Can anyone help me and solve this problem of my new iPad not connecting to iTunes?

    I found a solution. It seems that Windows had a setting selected that drivers are not automatically installed if not available on the computer. So I changed this setting and my iPad was immediately recognized.
    For people with the same problem: I went to: Control Panel > Devices and printers. Under Unknown I saw my iPad, so I right clicked and selected: Solve problems. Then it said something about missing drivers so I chose to install them. In addition the problem solve wizard pointed me to the setting in windows that drivers are not automatically installed.

  • My iphone4 is not seen on itunes. When I plug the iphone the device does not recognize it but the pc recognizes it as a camera or something. What can I do?

    My Iphone is not seen on itunes when I plug it. I've tried everything that I found on the internet. but it still doesn't work, so I can't sync my iphone. What can I do? I have checked all the USB ports, I have desinstalled and installed again itunes, and I have run out of ideas.

    When you plug it it, it should recognize it as an Apple IPHONE under devices. It will then bring the Camera/Connection wizard for the photos on the device. When you plug into different USB, it should bring the hardware wizard and tell you what its installing, what happens?
    Under Device Manager, under Imaging Devices it will show up as Apple IPHONE. Is this being shown in your computer?

  • Ipod classic not seen in itunes on computer

    ipod classic not seen in itunes on computer

    I bought an second hand Ipod classic 160gb. How can i remove the music on it and put my own music on it. So the Ipod is not found in Itunes.

  • My iPod will not connect to itunes after windows 8.1 download

    My iPOD will not connect to itunes after windows 8.1 download
    I already uninstall itunes and made sure there were no file left before I installed again (it didn't appear to be any files left but music I had on it before was still there when I reinstall it)
    My ipod does work on my old computer and it was working on windows 8 before I update to  8.1
    I don't want to installed again because I just did that and didn't work!
    I want to use my iPod on this computer and system.  Can this be fix?

    Hey TheBurntApple,
    Thanks for the question. I understand that you are experiencing issues with your iPhone connecting to iTunes for Windows. While you may have already attempted most of the steps in this article, I wished to provide it to you just in case something was omitted.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

Maybe you are looking for

  • Alternate table of AP_INVOICE_LINES_ALL in 11i

    hi 2 all I have developed Supplier Statement of Account report in oracle apps r12 and use AP_INVOICE_LINES_ALL table. it running fine in R12 , but when i run in 11i , compiler raised error on AP_INVOICE_LINES_ALL table , b/c this table is not availab

  • HT3209 HD Digital Copy Download Error

    I have an HD digital copy which i intend to download to my computer for use with my iPad 2, iPhone 4, and iPod Touch but it will not download claiming my computer isn't HD compatible. It's prompting (err = 11111) I don't care if the digital copy does

  • MIGO/MIRO - possible? posting date accept only workdays

    Is possible to accept only workday dates in MIRO and MIGO for posting date? if any one knows please let me know how. thanks.

  • Anyone noticed Safari scrolling too fast (Magic Mouse)?

    Has anyone reading this noticed that scrolling with a Magic Mouse, while in Finder, other Apps (or Browsers such as Chrome and FF) is commensurate with the Scroll settings set in System Preferences \ Mouse \ Scrolling, but that in Safari, those setti

  • Publish Problems

    More Publish Problems! Ok... So now that I have been working on my sites when I publish I get "Publish Error" an unknown? Help... I am using iWeb 1.1.1 and thought that this word be an easy way for students to get access to some pod casts... Now what