Ipad not sending mail

I have set my mail serves for email however it does not send e mail any other users have this trouble

Can you provide a some more info?
Who is the email provider?
Can you recieve emails?
How about on another device?
Can you access the account by going directly to the providers site?

Similar Messages

  • Why can I receive mail on my iPAD during my visit to the USA but not send mail?

    Why can I receive mail on my iPad during my visit to the USA but not send mail?

    Double check to make sure that your same email addresses are set up on both devices in the Messages settings. Also ensure that you have text messaging forwarding turned off if you do not want to receive them on your iPad.

  • Can not send mail with google account

    I have the Ipad in the 3G model but I am unable to send mail using my google account that is linked to it. If I was to go on the internet on it and send things through google it would let me but I need to be able to send attchments off the ipad so need to be able to use the mail app. I keep getting a message saying Cannont send mail the sender address was invalid. Please help

    I am having alot of trouble with my ipad(3G) and mail using gmail push set up using exchange server. It seems like every couple days it will not send mail and says unknown recepient or invalid. Then the next day it will work. I've deleted and set up the email account a few times. Same thing happens. If I just use a normal non push gmail account that works fine, but I'd like the gmail push to work. I have a strong wireless signal when this happens.
    Any ideas?
    thx
    lenn

  • Multiple hotmail accounts but one will not send mails and gives no error messages

    I have four hotmail accounts on my iPad (me, kids, wife) and we have all been using them fine however, my wife's hotmail account will not send mails.  I get no error messages at all for this to explain why, it just doesn't reach the intended recipient and does not turn up in the sent mail folder.
    I have deleted the account and re installed using a number of the choices including other outlook and even tried yahooing no change.
    Can anyone assist.
    I am on the latest iOS
    Thanks

    This problem in Mail is usually caused by some Launch Services cache or preferences corruption that affects the built-in spell checker. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
    Resetting Launch Services
    If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
    Resolving Disk, Permission, and Cache Corruption
    The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
    Side effects of System cache cleaning
    As an example, this is how you should proceed with OnyX:
    1. Quit all applications.
    2. Launch OnyX and enter your administrator password.
    3. Go to Maintenance > Reset and check LaunchServices database.
    4. Un-check any other pre-checked options.
    5. Click the Execute button.
    6. Restart the computer.

  • TS1398 My iPad cannot  send mail - the connection to the outgoing server failed

    My iPad cannot send mail - the connection to the outgoing server failed.

    Go to the email settings, and re-enter your Outgoing Server username and password.
    Have you changed that recently, perhaps on the Incoming Server but not on the Outgoing server?

  • Bursting Program not sending mails

    Bursting Program is not sending mails , we have checked everything and looking good , not generating logs.
    XML Publisher: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    XDOBURSTREP module: XML Publisher Report Bursting Program
    +---------------------------------------------------------------------------+
    Current system time is 14-JAN-2014 07:50:56
    +---------------------------------------------------------------------------+
    XML/BI Publisher Version : 5.6.3
    Request ID: 101436869
    All Parameters: Dummy for Data Security=Y:ReportRequestID=101245852:DebugFlag=Y
    Report Req ID: 101245852
    Debug Flag: Y
    Updating request description
    Updated description
    Retrieving XML request information
    Node Name:RPC5150
    Preparing parameters
    null output =/u000/oracle/PTCCON/apps/apps_st/appl/xdo/12.0.0/out/ESCM1/EM185082.101436869
    inputfilename =/u000/oracle/PTCCON/apps/apps_st/appl/ncr_custom/ncrx/12.0.0/out/ESCM1/EM185082.101245852
    Data XML File:/u000/oracle/PTCCON/apps/apps_st/appl/ncr_custom/ncrx/12.0.0/out/ESCM1/EM185082.101245852
    Set Bursting parameters..
    Temp. Directory:/tmp
    [011414_075107900][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.130 - Production
    [011414_075107910][][STATEMENT] setOAProperties called..
    Bursting propertes.....
    {user-variable:cp:territory=US, user-variable:cp:ReportRequestID=101245852, user-variable:cp:language=en, user-variable:cp:responsibility=51687, user-variable.OA_MEDIA=http://ESPROD.daytonoh.ncr.com:8008/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=101245852, user-variable:cp:locale=en-US, user-variable:cp:user=EM185082, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=101436869, user-variable:cp:org_id=152, user-variable:cp:reportdescription=NCR_MFS_ACKNWLG_PDF_REP, user-variable:cp:Dummy for Data Security=Y}
    Start bursting process..
    +---------------------------------------------------------------------------+
    Start of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    End of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    Executing request completion options...
    Finished executing request completion options.
    +---------------------------------------------------------------------------+
    Concurrent request completed
    Current system time is 14-JAN-2014 07:51:08
    +---------------------------------------------------------------------------+

    I was troubleshooting my own issue noted above and tried to send the attachments via gmail's web interface (bypassing Apple Mail). This time, gmail provided an error message stating that the file contained a virus.
    Since it was a zip of several Word docs, I saved them as PDFs and then rezipped, and Apple Mail sent them off like a champ.
    Evidently, Mail does not have a method for relaying the precise nature of the error message that gmail sends (in this case that the attachment had what gmail thought was a virus). This would be a prime area for some software developers to tackle on a future version of Mail.
    By the way, the files almost certainly do not contain viruses; they are extremely old Word Docs that have been on my successive Mac hard drives for at least 9 years. Too old a format for gmail to recognize?
    Hope this helps someone who may be having the same trouble.

  • Can  not send mail using wifi at a motel .I can receive mail fine

    can  not send mail using wifi at a motel .I can receive mail fine

    Hi there tamarafromdarien,
    You may find the troubleshooting steps for iCloud Mail in the article below helpful.
    iCloud: Troubleshooting iCloud Mail
    If you can't send mail in OS X Mail
    If you receive this alert or a similar alert when sending a message from your iCloud email address in OS X Mail:
    “This message could not be delivered and will remain in your Outbox until it can be delivered. The reason for the failure is: An error occurred while delivering this message via the smtp server: server name.”
    In OS X Mail, choose Preferences from the Mail menu.
    Click Accounts in the Preferences window.
    Select your iCloud account from the list of accounts.
    Click the Account Information tab.
    Choose your iCloud account from the Outgoing Mail Server (SMTP) pop-up menu. Example: “Derrick Parker (iCloud)”.
    Note: The Outgoing Mail Server (SMTP) menu also includes an Edit SMTP Server List command. If you choose this command, be aware that the iCloud SMTP server won't be among the servers that can be edited. This is normal.
    If you're attaching a large file
    Message attachments can't exceed the maximum size allowed by your email service provider or the recipient's email service provider. The maximum size varies by service provider. Try compressing the filebefore sending it, or send your message without the attachment to verify that there are no issues with sending.
    -Griff W.  

  • Why can I receive but not send mail?

    Why can I receive but not send mail?

    With sparse information you give I would venture that you have not set up the correct Outgoing Mail Server settings in Mail>Preferences>Accounts. Contact your ISP for their set up.

  • Mail will not send mail, only receive.

    I have spent the majority of today re-installing OS X and all necessary updates, music, data after the death of a hard drive. Luckily everything went perfectly, except for the same problem I had with Mail even before the 1st hard drive died. Mail will not send mail, only receive.
    All efforts time out and give me this message: "The connection to the server mail.earthlink.net on port 25 timed out"
    Mail used to send messages, but stopped suddenly in 2004 and has yet to start again. Any idea guys?! I can't figure it out, under Account settings I have necessary fields filled in: Outgoing Mail Server (SMTP) is set to "mail.earthlink.net", Server Port is set to 25, and Authentication drop menu is set to None.
    Any help would be greatly appreciated.
    --DANIEL

    This is NOT a problem with Mail or OS X. This is an incorrect settings problem - garbage in = garbage out and this information is certainly available at Earthlink's website and Earthlink also provides technical support.
    Earthlink has an authenticated SMTP server they changed to long ago.
    SMTP Server: smtpauth.earthlink.net
    Server Port: 587 but 25 should work if you are using Earthlink as your internet service provider for connecting to the internet.
    Use SSL: Off or not selected.
    Authentication: MD5 Challenge-Response
    User Name: Your ENTIRE Earthlink email address.
    Password: The account's password - the same password used to check the incoming mail server for new messages.

  • Not send mail for external domains

    Hi,
    I have installed OCS 10g(10.1.2) in linux. All components ok, but i not send mail for external domain.
    Att,
    Mesti

    I remember in version 9.0.2 that i configure in SMTP_OUTBOUND the IP of DNS external to send mail for other domains.
    Mesti

  • SendMail: can not send mail with body more than 1000 caracters

    Hi,
    I can not send mail with a body wich is more than 1000 caracters.
    FUNCTION SendMail(SMTPServerName IN STRING,                     
                        Sender IN STRING,                     
                        Recipient IN STRING,                     
                        CcRecipient IN STRING,                     
                        BccRecipient IN STRING,                     
                        Subject IN STRING,                     
                        Body IN STRING,                     
                        ErrorMessage OUT STRING,                     
                        Attachments IN ATTACHMENTS_LIST) RETURN NUMBER IS      
                        AttachmentList VARCHAR2(4000) := '';      
                        AttachmentTypeList VARCHAR2(2000) := '';   
                          BEGIN       ParseAttachment(Attachments,                      
                                                      AttachmentList);      
                                      RETURN JSendMail(SMTPServerName,
                                                       Sender,                       
                                                       Recipient,                       
                                                       CcRecipient,                       
                                                       BccRecipient,                       
                                                       Subject,                       
                                                       Body,                       
                                                       ErrorMessage,                       
                                                       AttachmentList); 

    Hi,
    I can not send mail with a body wich is more than 1000 caracters.
    FUNCTION SendMail(SMTPServerName IN STRING,                     
                        Sender IN STRING,                     
                        Recipient IN STRING,                     
                        CcRecipient IN STRING,                     
                        BccRecipient IN STRING,                     
                        Subject IN STRING,                     
                        Body IN STRING,                     
                        ErrorMessage OUT STRING,                     
                        Attachments IN ATTACHMENTS_LIST) RETURN NUMBER IS      
                        AttachmentList VARCHAR2(4000) := '';      
                        AttachmentTypeList VARCHAR2(2000) := '';   
                          BEGIN       ParseAttachment(Attachments,                      
                                                      AttachmentList);      
                                      RETURN JSendMail(SMTPServerName,
                                                       Sender,                       
                                                       Recipient,                       
                                                       CcRecipient,                       
                                                       BccRecipient,                       
                                                       Subject,                       
                                                       Body,                       
                                                       ErrorMessage,                       
                                                       AttachmentList); 

  • I can not send mail when at school. Please help

    I can not send mail when at school. Please help

    What is the email provider? If it is from your home Internet service provider, they usually block sending when not on their network. If this is the case, see if you can log into the smtp server with username and password. If they allow that, you can enter that in the email account settings.

  • Backend query to configure do not send mail

    Hi,
    We need to configure workflow notification mailer in production instance: The plan of action is as follows:
    Change the mail_status to 'SENT' for all mails which are in queue.
    Update the personalised status for all users to 'DO NOT SEND MAIL'
    Select few users and set status to 'MAIL TYPE HTML' so that these users will be able to receive mails.
    Configure workflow mailer.
    Test the mailing service.
    Now in above plan we need to find out backend query to update this status from backend for changing status to 'DO NOT SEND MAIL' as there are 200's of users. and manually would be time consuming.
    Can you please guide.
    Regards,

    Hi,
    Please see these docs.
    How To Set Email Style Preference For All Users At Once? [ID 578574.1]
    How To Update 'Notification Style/Email Style' Under The Notification Preference For All The Users Globally .? [ID 564713.1]
    How to mass change Mail Preferences for FND USERS [ID 451929.1]
    Thanks,
    Hussein

  • HT2500 without changing settings, iMac mail V4.6, 1)will not save password 2)takes accounts offline 3)will not except password 4)will not send mail from accounts every time.     What happen?

    without changing settings, iMac mail V4.6,  1)will not save password   2)takes accounts offline  3)will not except password   4)will not send mail from accounts every time.
        What happen?  How do I correct this?

    Hi Nuch1,
    I found an article that is contains very thorough Mail troubleshooting steps:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    You can use that article to figure out what part of the email "ecosystem" is the cause of the issue, and it can also help you attempt to resolve it.
    Hope that helps,
    David

  • CiscoWorks LMS 3.2 Not sending mail

    HI,
    I have got a CiscoWorks LMS which is not sending mail for HUM reports.
    Here's the log that I receive when it is supposed to send the mail in smtp.log
    [ Sun Oct 16 13:17:42 CAT 2011 ] INFO   [MailUtility : isMailServerWorking]  : The mail server [10.102.247.57] is responding
    I can telnet to the server port 25. No authentication is required for sending mail to local domain.
    There is a MacAfee Agent but it is configured to send mail.
    I don't have a clue what is causing it.
    Could you please help.
    Thanks,
    Ashley

    Hi,
    Are other email messages being sent as expected? 
    Do you have a size limit defined under CS > Server > Admin > System Preferences?
    Have you verified the email leaves the LMS server?
    Are there any related logs on you mail server?
    Does the condition persist when you disable any host firewall and anti-virus agents?
    Try some debugging:

Maybe you are looking for

  • Plz tell me wht is error in  code.its showing illegal start of expression

    import java.awt.*; import java.awt.event.*; import java.awt.image.*; class Image01 extends Frame{ //controlling class   Image rawImage;    //ref to raw image file fetched from disk   Image modImage;      //ref to modified image   int rawWidth;   int

  • Find the duplicate meterial no

    hi all i have an issue we have loaded master data 0material to 2 info objects and 1 cube so user found some duplicate meterial no in data so how to find these duplicate meterial no . is it posible to create infoset and join both the objects

  • Export Post-Processing Feature Request

    Using a post-processing action such as a Photoshop droplet in an export is limited by the command line length which must be sent to the application (Photoshop in this case). This means that exporting a few files will work ok with the action but expor

  • How to run as privileged user in WebLogic

    I am running WebLogic 10.3. Configured a datasource as well as role-based access policies. In my web app and EJB deployment descriptors, I specified <run-as> roles so there is no problem for servlets and EJB's to access the datasource. However, I als

  • Launch multiple WS apps from a local Java application?

    I should develop a local Java application that on demand launches webstart applications. Obviously it could be done with a simple HTML file, but the requirements are that launched apps be monitored by the launching app, so they need to be in the same