IPad only app stop working after upgrading iOS

After I updating my iOS from 7 to 8.1 one of my apps not loading. The only thing that as change with app that's not loading is it went from a Single-Folio to a Multii-Folio app subscription. But was working fine in iOS 7 on iPad
     Error: Cannot install item, please restart the app and download your purchase again.
Any help fixing this problem will be appreciated!

Bob, I designed the iPad app version of a publication called NASA Spinoff. The first version 2012 was uploaded May 2013 as a Single-Folio  and then we made  a Multii-Folio app in Aug 2014 for the 2013 version its a annual pub. We have 2 versions now and working this years app.
As a NASA contracter, NASA creates the apps from folios that I upload to NASA folio producer. All was well until they created the Multii-Folio.
I think its the way the Multii-Folio app setup.  It was working in iOS 7
Link:
https://itunes.apple.com/us/app/nasa-spinoff-2013/id904717045?mt=8

Similar Messages

  • Why does the ipad 2 speaker stopped working after upgrading to ios 8

    WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond

    Hi A_S85,
    It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
    Follow these steps and test the sound after each one.
    Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
    If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
    Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
    Restart your device.
    Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
    Go to Settings > Bluetooth and turn off Bluetooth.
    If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
    If the device is in a case, make sure that the case doesn't block the speaker.
    Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
    Update your device to the latest version of iOS.
    If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • Mail app stopped working after upgrade to Mavericks

    Dear All,
    I have updated from Mountain Lion (Macbook Pro 3,1, 256SSD) to Mavericks, and mail app stopped working.
    That means - when I click the icon - the app does not work.
    I can see that it downloads mail - as when I click it I receive notifcation that it has downloaded some mail, however I cannot open window. Sometimes I manage to open it, but it is totally unresponsive - I cannot change or click anything in it.
    I have tried repairing disk permissions but without any success.
    Moreover if I run mail app and try to click "new message" from the top bar, the window that appears is somewhat mixed with my wallpaper backround (I can see fragments of it).
    Please help me, as I had there a few gigs of precious mails that I don't want to lose...
    Thank you in advance!
    Olek

    Do a backup.
    Take notes of all account information or take screen shots. You may need to set the accounts up again. Quit Mail.
    Copy the line below.
    ~/Library/Containers/com.apple.mail
    Select Go/Go To Folder from the Finder menu bar. Paste the line into the window. You won’t see it.
    Move the folder com.apple.mail to your desktop. You must move the entire folder, not just the contents.
    Relaunch Mail and test. If the problem is solved, recreate any required Mail settings and import any emails you want to save from the folder on the desktop. If the problem remains, return the folder to where you got it replacing the one that is there. 
    Information learned from Linc Davis.
    If you prefer to make your user library permanently visible, use the Terminal command found below.
    Show User Library Directory in Mac OS X 10.7 Lion & 10.8 Mountain Lion
    You might want to bookmark the command. I had to use it again after every update. I have also been informed that if you drag the user library to Finder it will remain visible.

  • Why do some apps stop working after update to iOS 6?

    I notice one of my apps stopped working after the iOS 6 update, in particular Uno HD, which I paid $5 for.  Why did this happen?

    I had solved the problem by installing the free app, which seemed to reset something, then I deleted the free app, and the paid version continued to work until the next day.  I was going to show one of my friends the game, and then it once again would not open- the same problem was back, as soon as I went to open it, it crashed back to the desktop without opening the game.  I had to re-install the free version again, and for a while, neither version would work, but then after a while, it started working again.  I guess I have to leave the free app installed or I won't be able to use the paid version of Uno.
    EDIT
    Just checked again, took the Uno app out of resident memory by double-pushing the home button and holding the app icon til it starts to shake, and then hit the minus symbol, which deletes it out of resident memory.
    Went to open it again, and it of course crashed back to the desktop again.  So there is some issue with it that is making it unstable.
    I have to keep pushing on either one of  the app icons continuously until one of them starts, and then the other one will start.
    Gameloft needs to do an update.
    Message was edited by: Sonic Bodhi

  • Wifi iPad 3 charger stopped working after updating to iOS 6, help!

    Wifi iPad 3 charger stopped working after updating to iOS 6.  The little iPhone charger charges it very very slowly, but the charger gets really hot after a while.  I restored it and everything works but the charger.  It's only a few months old, should I try a new iPad wall charger block?

    Hi,
    I did this after reading the forums and it made no difference. it has actually charged from 14% to 67% but thats taken over 12 hours.
    Will monitor it and if no joy will go to a apple store
    Thanks

  • My work e-mail stopped working after upgrading to 5 ios.

    My work e-mail stopped working after upgrading to 5 ios, I get the message that the mail server is not responding. Verify that you have entered the correct account info in mail settings. the information is correct and worked until I updated.

    That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
    iTunes: Restoring iOS software

  • My Microsoft Office 2004 stopped working after upgrading to MT.  How can I get it to work, or, how can I uninstall MT?

    My Microsoft Office 2004 stopped working after upgrading to Mountain Lion.  How can I get it to work again, or, how can I uninstall MT?

    Office 2004 Applications Won't Work in Lion
    You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
    You may want to consider as well:
    These two suites are similar to Libre Office but not as current or as well-supported:
    NeoOffice
    Open Office
    And, then there is Apple's iWork suite:
    Pages - word processing and layout
    Keynote - presentation
    Numbers - spreadsheet
    Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
    (Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

  • After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working!

    After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working? Can it be recovered or a Hardware has to be replaced. I tried restoring my phone, but it did not work. Any solutions?

    alisportshots wrote:
    I have a similar problem, but after following your suggestion of deleting my iphone backup and then turning backup back on again, I needed to plug my phone into my computer to sync the backup.  I re-tried to do an icloud backup and it again told me that  "the last backup could not be completed"... since I had deleted the backup, it says the "Last backup:  never".  Ugh. I reconnected my iPhone 4S to my computer and iTunes so I could sync my phone and do a backup... it's still "waiting for sync to start"...
    For your iCloud backup, you may have an app that is preventing the backup from succeeding.  To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again.  If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again.  If it succeeds, turn some of your apps to On and try backing up again.  If it succeeds again, turn some more apps to On then try again; repeat this process until it fails.  Eventually you'll be able to locate the problem app and exclude it from your backup.
    If you turned iCloud backup off and try to sync to create a backup on your computer and got a "waiting for sync to start" error, it may be caused by a corrupt backup on your computer.  You could try deleting your last backup by opeing iTunes and going to Preferences>Devices, clicking on your last backup and clicking Delete Backup.  Then try again.

  • Whay mi back kamera on 4s stop working after uppdate iOS 7.1

    Whay mi back kamera on 4s stop working after uppdate iOS 7.1

    If you have been using the Camera app try quitting the app like I describe below then reset the iPhone.
    Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • Kodak ESP 3200 stopped working after upgrading to Yosemite

    Kodak ESP 3200 stopped working after upgrading to Yosemite

    Kodak has posted an unsupported hack that has been reported to enable printing to a Kodak printer not supported in OS X 10.10 ("Yosemite"). Perhaps it would have the same effect with some other kinds of printers that aren't supported in Yosemite. I have no information about that, one way or the other.
    I have not tested the hack myself and I don't know all the possible effects. As far as I know it will not break the compatibility of printing software that is already compatible with Yosemite. It may degrade the security of the web administration interface of CUPS. That interface is not enabled by default, and will not be enabled by the procedure described here. Even if it were enabled, I know of no way it could be exploited, with or without the modification. Nevertheless, if you have enabled the web administration interface, you should disable it if you decide to follow these instructions. If you don't know what the web administration interface is, you haven't enabled it.

  • IPAD-2 passcode not working after upgrading to 5.0 today

    iPAD-2 passcode not working after upgrading to 5.0 today

    Ditto here.  Searching all over the web site for an answer, haven't hit paydirt yet.  Meanwhile, I'm plain old locked out.
    Bill

  • Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

    My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

    try and Reset the System Management Controller (SMC)

  • Windows media player stop working after upgraded from firefox 6.02 to Firefox 7.01 yesterday.

    windows media player stop working after upgraded from Firefox 6.02 to Firefox 7.01 yesterday.
    the plugin for win media player is already installed and working fine in FF 6.02 before upgrade. i have Google this issue without any result so far. so i reinstalled the old version 6.02, until fix is found.
    anyone has the similar issue with Firefox 7.01 in Win 7 32 bit ?

    The issue was not with FF 7.01. VLC player version 1.11.1 is conflicting with windows media player when FF 7.01 tries to play media files! Which was not happening before in FF 6.02.
    VLC and plugin media player need to be uninstalled first, then uninstalled FF 6.02. Install FF 7.01 and then win plugin media player again.
    Test media player at www.vdat.com/techsupport/windowstest.asp

  • Many apps not working after upgrade

    I have a lot of apps not working after upgrade even apple's remote, splash id etc... Anyone else or is it just me?

    I had trouble with MPR, but since it's free, I just deleted it and reloaded it directly from the App store onto the phone. It had an upgrade, too, that must have clashed with the 2.2 upgrade. Once I did the download, it was fine.

  • Why every half hour or so does my iPad camera app stop working?

    Every like half hour or so my iPad camera app stops working. I tap and It and  a blank screen appears. If I turn my iPad off and on again it works fine.

    There are any number of reasons why that might be happening. An app confict, low memory (that's not supposed to happen but ...), so it's hard to say for sure what the issue could be.
    You could try closing the camera app until you need again, and see if that makes any difference. Unless you really need to get to the camera app every half hour for whatever reason, there should be no problem in quitting the app.
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps.
    Then just launch the app again when you need it.

Maybe you are looking for

  • Issues while Exporting OBIEE Answers Report to Excel

    Hi All, In my report, I have a column named (Order number) which is a measure column. I am displaying this column in a pivot table view. In the measure section i am duplicating this column(Order number) and applying % for the column in the following

  • Can't PGP decrypt message

    Hello, I'm having problems with decrypting messages from a friend. I have his public key imported and signed as trustworthy, but I could't decrypt messages he encrypts with my key. Enigmail says: "Error: signature verification failed", and by trying

  • Safari crash - suspect third party info on crash report

    bplist00'      !"_  SuspectThirdPartyBinaryInfoXACRRInfoTDateTPath◊         \StartAddress[DisplayNameTSize[IsAppleCode_  BinaryInfoDwarfUUIDKeyZIdentifier^ExecutablePath   †_ !.BlazingToolsPerfectKeylogger.tmp   O  ^ÓíµÌ,‚!» ¶]3%!_ !.Bla

  • Where does Aperture store PhotoStream Masters

    I had PhotoStream enabled for some time Lion, until I realized it wasn´t very clear what was happening with my photos, and was breaking my import workflow. I then disabled it. Now, when I try to import photos from my iPhone, it thinks some of them ar

  • App Store says my password is incorrect when I know it's not.

    I really hope someone can help as I have a new iphone and can't download any paid apps. so can't really use my iphone to its potential. Whenever I try to buy an app that costs it asks to verify my purchase, i have the choice to cancel or continue. I