IPad only has a black screen yet still lights up
My iPad 2 suddenly only has a black screen, however it lights up when home button or power button is pressed, but it is still a black screen! How do I fix this? Please Help!
I also have a game question but that is the least of my worries right now.
Hi,
With the iPad turned on try a reset by holding down both the Home icon and power button together for about 10 seconds, you should then see an Apple logo in the middle of the screen.
Let us know how you get on, good luck.
Regards,
Steve
Similar Messages
-
My iPad only has a blank screen. If you press the two buttons to try to get it to restart all you get is a faint light for al few seconds and then it goes back to a black screen. I did try to restore by hooking up to my mac, but I still have nothing.
First thing to try is a reboot of your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Hold those buttons a long time before letting them go. Also it might be best to leave the iPad on the charger overnight before resetting it.
If this doesn't work, it's time to make an appointment at an Apple store for a Consultation. -
iPad 2 has a black screen which lights up to a grey black screen when I press the power or home button but I dont see the apple logo. The battery is fully charged and when I plug it in to my computer, I can use iTunes to do everythng except backup the iPad since its passcode locked. Please help me resolve this problem. I don't have apple care
Yup! I've been there! You just have to double-tap the screen with three fingers and the zoom should go back. You have to turn off the feature in Settings>Accessibility>Zoom>and turn the switch off so this won't happen again when you double-triple tap.
-
When I am on a call and I come to hang up, the phone which when to my ear has a black screen, starts to light up so I can see and click the hang up button, but it then blacks out intermittently and in the brief moments it is lit up, the hang up button doesn't work unless I press the home or lock buttons first
Wow- thanks Jim! I removed the case and voila... it worked. Knock on wood that you solved my problem with such an incredibly simple solution. I'll find out where this proximity sensor is and make sure my case does not interfere with it.
Thanks so much.
Annick -
Pavilion dv6-3227cl entertainment notebook powers on but only has a black screen
An HP Pavilion DV6-3227cl Entertainment Notebook, that is approximately 2 years old and is running Windows 7 Home Premium, AMD Vision Premium, will power on but not boot up. The fan runs and the "caps lock" light flashes once approximately every 4 seconds but all I get is a black screen with no cursor or error messages. There are no beeps. The power supply indicator illuminates (white) for about a second, then turns to a dim orange when the battery is installed, but remains white when the battery is removed. However, the two indicator lights (I'm not sure what they are for) next to the USB port nearest the power indicator light illuminate as follows: the one on the left (as you are looking at the right side of the notebook) is white; the one on the right is orange. Both are fully illuminated (not dimly as the power indicator light). The power indicator light is not as bright as the other white indicator near the USB port. The notebook has booted up and appeared to be running one time since having this problem started, but I have not been able to get it to boot up again. I am told the battery is bad (it's my brother in law's notebook), but is it possible the problem is with the power source rather than the processor or motherboard? I appreciate your comments/advice on this matter. Thank you.
This question was solved.
View Solution.Hi fejevitzky,
Your question, "Based upon that, I believe you are telling me you do not think it is the BIOS--is that correct?" Yes, as long as you dont see any "white" light reveal from LCD bezel back side while with blank screen state. LCD bezel is the cover around LCD, most design put LED modeule at the bottom side next to LCD. While back light is not on during boot up sequence, that means system doesnt have chance to get BIOS program running. It also means, it stuck at state of hardware bring up. Normally motherboard related.
I quickly checked hp.com and found some link that may help. Or 1-800-HP invent (1-800-474-6836) can save times. This forum only intends to quick/simply reply users questions. About another service and repair charge, I have to give you other links to reach.
HP Partner and Store Locator: (I try to search your city, but doesnt work well. Suggest you call for quick response)
http://www8.hp.com/us/en/store-finder/index.do
Contact info:
http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
Contact HP:
http://www8.hp.com/us/en/contact-hp/contact.html
HP SmartFirend Services: (I saw it with price of service)
https://h30617.www3.hp.com/HP/home/index.asp?jumpid=in_r11682_us/en/hho/pps/suppgateway_gi_ob_ds_pd/...
Thank you so much. If you think my reply helps your product, please help to close this case once you feel comfortable. And, click "KUDOS".
I work for HP. -
My iPad Mini has a black screen and does not respond to anything.
I got my iPad Mini 6 days ago, and this morning I woke up to it overheating (to a point which any contact with it, or the case) was painful. Along with this overheating, the screen was and still is black. The iPad is not responding when I try to turn it on, off, hard reset it, etc.. It has not been taken off charge in approximately 6 hours, so I highly doubt lack of battery is a reason.
HElp, please. And thank you in advance.Time to make an appointment with Apple.
-
my ipad 4 don´t turn on, I'm very stressed.
Yesterday i took a photo and when I wanted to see it my ipad is restarted. took too long to turn on and turn off once was.
I've tried many ways to change the lightning cable, pc change, restoring the apple mobile device usb, but itunes still throwing me the error 4005.
I have proven with other software like redsnow but mark me the error as it does not support ios 7.1.2.
when i connect the ipad in Itunes, it says me that my idevice is in recovery mode.
when this happened it was the battery to 100 percentTry this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPhone, iPad, iPod Touch: Troubleshooting Touchscreen Response
http://support.apple.com/kb/ts1827
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Restore errors 4005, 4013, and 4014
http://support.apple.com/kb/TS5314
Cheers, Tom -
Laptop has a black screen and the light near the caps lock is flashing.
My HP Laptop won't boot up. I can hear the fan start up then the light near the caps lock will flash. Then it will turn back off.
Hi,
The following link shows a list of blinking codes:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443366
No good isn't it. The following list shows an HP office phone number near you:
http://welcome.hp.com/country/w1/en/contact_us.html
http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
My ipad has a black screen and won't start, any ideas?
My Ipad 1 has a black screen and won't start, any ideas? It is charged.
If Paul's advice doesn't work try this.
Hold down on the sleep button AND the home button at the same time for about 10 seconds until the Apple logo appears on the screen - ignore the red slider - let go of the buttons and let the iPad restart.
BTW ...In order to start up under normal circumstances you only need to hold down on the sleep button for a couple of seconds or so until the Apple logo appears on the screen. -
Hi there my Ipad 2 has a black screen, will not power up and will only have an Apple icon when plugged into a mains power source. It will not power up when connected to a laptop. Any thoughts please?
Regards,
AllanHi there,
You may find the troubleshooting steps in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W. -
My touchsmart 300 wont start just has a black screen can you please help
My touchsmart wont start just has a black screen fan runs light is on. I unpluged it and help the start button for 5 sec and still wont start. can you help
My touchsmart wont start just has a black screen fan runs light is on. I unpluged it and help the start button for 5 sec and still wont start. can you help
-
My Iphone 4 has a black screen it still works I just cant see who Is calling or texting how can I fix this ?
You can actually fix this by posting this in the iPhone forum and NOT an iWeb forum which is for building websites.
Check which forum you are posting in before doing so. -
How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit -
My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
Will not show up in safe mode, will not show when started from Windows 7 DVD.
I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
Can see the PC volume from Mac side with files.
I've looked at all the online solutions so far and have tried most of them without success. Please help!
Specs:
2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
Model Name: MacBook Pro
Model Identifier: MacBookPro5,2
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP52.008E.B05
SMC Version (system): 1.42f4
Serial Number (system): 7302300GANE
Hardware UUID: B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
Sudden Motion Sensor:
State: EnabledEDIT: RESOLVED
For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
Specifically, the posts by Dunsany and valkyr did the trick. I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally. I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again. I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time. Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black. I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
Hope this helps someone else! -
My ipod has a black screen. I have tried to hold the sleep/off button and menu button at the same time with no luck. I connected to my computer and tried restore on itunes - still with a black screen a voice said "screen locked' code 542
Is the iPad charged? Plug it in with the charger/wall outlet for half an hour and try again to reboot by holding both the power and home buttons until the apple logo appears.
Maybe you are looking for
-
How do I edit a pdf form content?
I have filled out a pdf form and want to edit what I've added to the form. When i use "Content Editing - edit text & images" I'm only allowed to edit the form itself. What format should the pdf be in to edit the content I've added to the form?
-
Passing URL Parametes to Variables in variable Selection Screen
Hi Is there any way to pass the URL parameters to the variables in the selection screen of Web Report/ and How to make to non editable. Your points are assured Thanks and Regards Prasad
-
Maximum Length of Stored Procedure Name
Hi, What is the maximum length of the name of a stored procedure? Thanks
-
What happened to the .69 songs today?
What happened to the .69 song lists that were available this morning?
-
Is Anyone at Apple Noting Problems Installing v11.1.4.62
This new version seems to be causing an awful lot of problems, at least with Windows compatibility, I thought I had it all working properly after painstakingly following HT1923 to strip all Apple SW from my computer and re-install. This evening, pro