IPad pixels are not all working so display is multicoloured any ideas

iPad pixels are not all working so display is multicoloured any ideas.

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Similar Messages

I have iTunes 10.5 and a 4g iPod touch. WHen I upgraded to 5.01, my photos are not all in the correct folders. Any ideas?

When I load my photos on my 4g ipod touch with iOS 5.01, the photos are there but not all in the correct folders. How can I correct that?

I spent last week looking for a solution to that little yellow "!" needle haystack....
It is probably buried where nothing can touch or change it other than what I resorted to and would have saved time, clean install after I made sure to have two backup sets: Windows Easy Transfer plus Paragon clone OS and partitions to drive. Had to spend a full day reinstalling, updates, etc. Careful not to bring back any prefs or data that might be corrupt or wrong.
10.5 and iOS 5 on new iPod 4G works much better though and as they should and no issues like I had with AMS or other services or needing to restart first before launching iTunes.

Multimedia touch panel buttons on Satellite A500 are not all working

Hello,
I recently purchased an A500 (PSAR9A-02J001) laptop running Windows 7 (32-bit) Home Premium. Not all the top Multimedia touch panel buttons are working. When buttons are pressed, the laptop makes a beeping sound (which is normal) but the corresponding function is not executed.
For example, the Eco button at the top doesn't switch on/off the eco and the mute button does not mute the volume.
Device manager shows all devices as working correctly.
There are no errors in the Event Viewer Application or System logs.
Please advise!
Thank you,

Hello
Try please to reinstall Toshiba value added package.
Remove preinstalled version, restart your notebook and install latest version from Toshiba download page.

Ipad contacts are not all moving to icloud

I looked at my contacts on iCloud and noticed that there are only a small fraction of what I have on my iPad.
It says the last backup was recently and that it iCloud is turned on.
Any ideas on how I can get all of my contacts on my iPad into the iCloud?

Hello hayleyearnold,
It sounds like you are trying to sync your contacts and notes with iCloud so that they show up on your other devices and iCloud.com. I found some articles that might help with this.
I recommend looking at the section titled "Troubleshooting iCloud Contacts update or setup issues with iOS devices" in the following article:
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
For the issue you are experiencing with Notes, I recommend reviewing the following article:
iOS: Syncing Notes
http://support.apple.com/kb/ht4191
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

When syncing my IPOD, all of a sudden my podcasts are not being downloaded to my IPOD. Any Idea's why?

When syncing my Ipod. I now do not get the Podcasts that I have had in the past. They are on my computer but when syncing do not download to the IPOD. Any Idea's?

I have a 4th gen nano that periodically has this problem. First, try disconnecting it from the car and forcing it to reboot (by pressing and holding the menu and center button simultaneously until the apple logo appears if it is a click wheel version... Sorry, don't know how to do it on the 6G touch nano). Once it finishes, reconnect it to the car.
If it still does not recognize it (only once out of a dozen or so times has the above not worked on mine), connect the iPod to iTunes and reset the settings and re-sync it, then reconnect to the car.

My speakers are not all working as they did. Is there a speaker test?

Hi to all,
This is my first post on the forum, and is done in desperation.
I have a laptop in my car running windows XP sp3 and an Audigy 2 ZS pcmcia card.
All was well when I first set up the system (with the help of my son who has now moved out and started his own family).
When my son was here he helped (well virtually did it all) setting up the Audigy software and I remember him saying that the cd that came with it was outdated and he downloaded new drivers etc and installed them on the fresh install of windows we had. all the speakers FR FL RR RL and Sub were ok and sounded really good, but last week windows died and since then I have installed fresh again and downloaded the latest software from the Creative site.
After installing the first time I remember a utility my son used (i think it was within the Creative software) that tested the speakers and a voice came through each one in turn to check if they were connected right. Now I cannot seem to find anything of the sort on this install? I also seem to remember that there was some way of choosing what channel went to what speaker, but can't find this in the new install either.
I just wish I was younger! Maybe then I could understand the problem as easily as my son would have! Doh!
Anyway thanks for reading this and any help would be much appreciated. BTW I am fine with the electrical / electronic side of things as I have been an electrician all my life. Its just this software side that gets me.
Al

Hello Sai,
Welcome to Apple Support communities.
You can use the following article to troubleshoot the sound issues with your iPhone.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Regards,
Jeff D.

All my contacts on iCloud are not showing up on my iPhone. Any ideas?

At first I had a list of contacts from iCloud and a list from MobileMe. I now have those merged... but the merged list isn't showing up on my iPhone. Does anyone have insights about what is occurring and how to fix it?

Let's explore options to resolve this issue mallory1056! I'm not familiar with Messaging Plus, are you referring to http://vz.to/1nGADlx Verizon Messages Application?
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

TS3276 My mail 4.5 doesn't recognize my user & pass anymore on my MacBook pro the same user & pass are recognized on my iPhone 4 & my iPad 2 but not my MacBook pro 10.6.8 any ideas...???

I keep getting this annoying message
when I know fo sure that the user & pass have been entered correctly & are being recognized by my iPhone 4 & my iPad2...
It never been a problem but for the last couple of days...
Has anyone have a clue of what's going on & how to fix it please...
Thanks
P-Y

No ability to access Mail on MacBook since 20th.
On Communities; there were a couple dozen similar problems, but only one post (that I saw; it takes a long time to sort through requests for help and then find help, it seems to me) that proposed solutions, which I tried with no result.
Failed to get resolution using Apple Troubleshooting instructions.
Used Chat & was told that I need to upgrade from 10.5.8 to Leopard (free to MobileMe account holders) & then spend $30 for Lion. The theory is that migrating from MobileMe to iCloud with my current OS is preventing mail from synching with MacBook. I don't know why this should suddenly be a problem. (No problems with Mail on iPhone3 or iPad2 or accessing through Safari/iCloud, true, but I migrated to iCloud four months ago.)
So far, three+ hours spent on this issue.
If anyone with this problem actually gets it fixed, I'd appreciated knowing before downlading Leopard & purchasing Lion....

The options to copy/paste/add comment are not appearing when I select a cell, any idea what I have done?

I was working on a spreadsheet, adding comments (yellow comment area), then I decided to see what these arrows do (< > ) I can see they are used for skipping through the comments. But now when I try to add another comment, the option doesn't appear, as well as when I select a cell, the options to delete, copy, cut, paste, etc. do not appear either...
Does anyone know what I've done and how to fix it?!

You may have a malware infection.
Do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database.
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]
If you can't fix it with the above listed scanners then you need to ask advise on one of the forums that specialize in malware removal mentioned in the <i>Popups_not_blocked</i> article.

Have a new MacBook Pro 15" retina. After login to my I tunes account I can't get it to download my apps library. A few have appeared but not all. Music is ok . Any ideas to help ?

New MacBook Pro 15" retina. Can't get I tunes to download my already purchased apps into the MacBook pro's I tunes apps library. Music appears ok

Ok guys thanks......have tried to download purchases from App sotor, but only shows purchases I have made of the macbook since I have had it, not he 100 plus apps that I have purchases in with Iphone, Ipad and prevoius (windows) laptop. Any suggestions appreciated. Thanks

TS2662 My keyboard will pair with my iPad but will not pair with my MAC...any ideas?

I have had my iMac for 2 years now...I have never had a problem pairing my keyboard. The batteries died in my keyboard so I changed them and now I can't get the keyboard to pair to my iMac. I know the keyboard is fine and the batteries work because the keyboard will pair to my ipad. Any reason my iMac is having trouble pairing with the keyboard? Thanks!

If it is paired currently, you need to unpair it if you want to pair it back with the iMac.
As I said, it can only be paired to one device. If you want to use it with another, you need to unpair it first and then pair it with the other one.
And, if you need to sign in with your password to your Mac, you will need to borrow any USB keyboard to do so and to pair it; once it's recognized, you can use the wireless keyboard again.

Hello After upgrading iPhoto 9.1.2 when you synchronize the iphone / iphoto ipad events are not copied correctly (this option checked all the photos on itunes).

Hello
After upgrading iPhoto 9.1.2 when you synchronize the iphone / iphoto ipad events are not copied correctly (this option checked all the photos on itunes).

I found this other thread discussing this topic, no fix, I will revert to 9.1.1 from Time Machine and wait for a new update.
https://discussions.apple.com/thread/3023160?

Netflix not working on either Apple TV in the house, but will work on IPad's, macs, etc. Other apps are working on Apple TV. Any ideas?

Netflix not working on either Apple TV in the house, but will work on IPad's, macs, etc. Other apps are working on Apple TV. Any ideas?

Power cycle the ATV and router.

Select only records where column values are not all equal to zero

Hi everyone, this seems so easy but it's got me stumped on finding a clean, easy way to accomplish this. I'm sure when someone responds, I'll kick myself. So, assume the following is what I've got:
with mytable as (
select 'Type 1' as itemtype, 'JAN' as monthname, 0 as theval from dual union all
select 'Type 1' as itemtype, 'FEB' as monthname, 1 as theval from dual union all
select 'Type 1' as itemtype, 'MAR' as monthname, 5 as theval from dual union all
select 'Type 1' as itemtype, 'APR' as monthname, 1 as theval from dual union all
select 'Type 1' as itemtype, 'MAY' as monthname, 4 as theval from dual union all
select 'Type 1' as itemtype, 'JUL' as monthname, 0 as theval from dual union all
select 'Type 1' as itemtype, 'AUG' as monthname, 0 as theval from dual union all
select 'Type 1' as itemtype, 'SEP' as monthname, 1 as theval from dual union all
select 'Type 1' as itemtype, 'OCT' as monthname, 7 as theval from dual union all
select 'Type 1' as itemtype, 'NOV' as monthname, 1 as theval from dual union all
select 'Type 1' as itemtype, 'DEC' as monthname, 2 as theval from dual union all
select 'Type 2' as itemtype, 'JAN' as monthname, 0 as theval from dual union all
select 'Type 2' as itemtype, 'FEB' as monthname, 0 as theval from dual union all
select 'Type 2' as itemtype, 'MAR' as monthname, 0 as theval from dual union all
select 'Type 2' as itemtype, 'APR' as monthname, 0 as theval from dual union all
select 'Type 2' as itemtype, 'MAY' as monthname, 0 as theval from dual union all
select 'Type 2' as itemtype, 'OCT' as monthname, 0 as theval from dual union all
select 'Type 2' as itemtype, 'NOV' as monthname, 0 as theval from dual union all
select 'Type 2' as itemtype, 'DEC' as monthname, 0 as theval from dual
select
itemtype,
sum (case monthname when 'JAN' then theval else 0 end) as JAN,
sum (case monthname when 'FEB' then theval else 0 end) as FEB,
sum (case monthname when 'MAR' then theval else 0 end) as MAR,
sum (case monthname when 'APR' then theval else 0 end) as APR,
sum (case monthname when 'MAY' then theval else 0 end) as MAY,
sum (case monthname when 'JUN' then theval else 0 end) as JUN,
sum (case monthname when 'JUL' then theval else 0 end) as JUL,
sum (case monthname when 'AUG' then theval else 0 end) as AUG,
sum (case monthname when 'SEP' then theval else 0 end) as SEP,
sum (case monthname when 'OCT' then theval else 0 end) as OCT,
sum (case monthname when 'NOV' then theval else 0 end) as NOV,
sum (case monthname when 'DEC' then theval else 0 end) as DEC
from mytable
group by itemtype
order by itemtypeI need an outer query around this one or something that will only select "Type 1"... i.e., if all of the months are each equal to zero, don't include the record in the result set.
Summing them to get a total of zero is not an option, as I could have -15 and +15 in different columns, in which case, that record would need to be displayed.
Something as simple as... "where not (oct = 0 and nov = 0 and dec = 0...) at the end is all I seem to need. I've thought about adding a case clause for each column, but that doesn't seem very efficient. Ideas?
Thanks in advance!
Mark
Edit... I know the following will work using the MINUS operator, but my real query is really huge, and I don't want to have to write it twice...
{code}
select
itemtype,
sum (case monthname when 'JAN' then theval else 0 end) as JAN,
sum (case monthname when 'FEB' then theval else 0 end) as FEB,
sum (case monthname when 'MAR' then theval else 0 end) as MAR,
sum (case monthname when 'APR' then theval else 0 end) as APR,
sum (case monthname when 'MAY' then theval else 0 end) as MAY,
sum (case monthname when 'JUN' then theval else 0 end) as JUN,
sum (case monthname when 'JUL' then theval else 0 end) as JUL,
sum (case monthname when 'AUG' then theval else 0 end) as AUG,
sum (case monthname when 'SEP' then theval else 0 end) as SEP,
sum (case monthname when 'OCT' then theval else 0 end) as OCT,
sum (case monthname when 'NOV' then theval else 0 end) as NOV,
sum (case monthname when 'DEC' then theval else 0 end) as DEC
from mytable
group by itemtype
minus
select
itemtype,
jan,feb,mar,apr,may,jun,jul,aug,sep,oct,nov,dec
from (
select
itemtype,
sum (case monthname when 'JAN' then theval else 0 end) as JAN,
sum (case monthname when 'FEB' then theval else 0 end) as FEB,
sum (case monthname when 'MAR' then theval else 0 end) as MAR,
sum (case monthname when 'APR' then theval else 0 end) as APR,
sum (case monthname when 'MAY' then theval else 0 end) as MAY,
sum (case monthname when 'JUN' then theval else 0 end) as JUN,
sum (case monthname when 'JUL' then theval else 0 end) as JUL,
sum (case monthname when 'AUG' then theval else 0 end) as AUG,
sum (case monthname when 'SEP' then theval else 0 end) as SEP,
sum (case monthname when 'OCT' then theval else 0 end) as OCT,
sum (case monthname when 'NOV' then theval else 0 end) as NOV,
sum (case monthname when 'DEC' then theval else 0 end) as DEC
from mytable
group by itemtype
where ( oct = 0 and nov = 0 and dec = 0 and jan = 0 and feb = 0 and mar = 0
and apr = 0 and may = 0 and jun = 0 and jul = 0 and aug = 0 and sep = 0
order by itemtype
{code}
Edit again... Ok, I guess I'm answering my own question here, but I think using a WITH clause to write the main query once and then selecting * from it twice using the MINUS operator in between where the second query has where (oct = 0, etc.) is what I need. If anyone else has better suggestions, please do let me know! Here's the pseudo logic for what I've come up with so far...
{code}
WITH mainquery as (select everything)
select * from mainquery
minus
select * from mainquery where (oct = 0, nov = 0, etc...)
{code}
Thanks again!
Mark
Edited by: user455268 on Mar 1, 2012 7:13 PM
Edited by: user455268 on Mar 1, 2012 7:16 PM

Hi,
You can do that with a HAVING clause:
select
itemtype,
sum (case monthname when 'JAN' then theval else 0 end) as JAN,
sum (case monthname when 'FEB' then theval else 0 end) as FEB,
sum (case monthname when 'MAR' then theval else 0 end) as MAR,
sum (case monthname when 'APR' then theval else 0 end) as APR,
sum (case monthname when 'MAY' then theval else 0 end) as MAY,
sum (case monthname when 'JUN' then theval else 0 end) as JUN,
sum (case monthname when 'JUL' then theval else 0 end) as JUL,
sum (case monthname when 'AUG' then theval else 0 end) as AUG,
sum (case monthname when 'SEP' then theval else 0 end) as SEP,
sum (case monthname when 'OCT' then theval else 0 end) as OCT,
sum (case monthname when 'NOV' then theval else 0 end) as NOV,
sum (case monthname when 'DEC' then theval else 0 end) as DEC
from mytable
group by itemtype
HAVING MIN (theval) != 0
OR MAX (theval) != 0
order by itemtype
;If the values are all 0, then the MIN and the MAX will both be 0.
If either the MIN or the MAX is not 0, then the values are not all 0.
This assumes that the combination (itemtype, monthname) is unique, as it is in your sample data.
If that's not the case, start with a subquery that GROUPs BY itemtype, monthname, so that, when you get to the main query, that combination will be unique.

When I upload a cvs file not all the column display in the Data / Table Mapping screen

1. I have created application using Apex Data Loading wizard. There when I am trying to load data from .csv file, but not all the columns display in the "Data / Table Mapping" screen. But if I go through AQL --> Utility --> Data Workshop, there all column display in "Data / Table Mapping" page. I want to get same thing in application I created. How will get all columns display in the screen?
2. Is there any way to select target table dynamically during runtime. So that in appication we can select different target tables with different source file to load data.

Your user info says iPad. This is the OS X Numbers forum. Assuming you are using OS X… Be sure the file is named with a .csv suffix.
(I don't have an iPad, so I don't know the iOS answer.)

IPad pixels are not all working so display is multicoloured any ideas

Similar Messages

Maybe you are looking for