Ipad power cord stops working after a few months

I have had my ipad for about a year and a half and have gone through four power cords. The adapter/transformer is not the problem it is the cord itself. I have used only apple charging cords bought from apple. I don't let kids plug it in or unplug it so that the cord doesn't get damaged but it nothing I do seems to help. Could it be a problem with the ipad itself?

Sounds like the router firmware needs to be updated or the router replaced with a newer one.

Similar Messages

Wifi iPad 3 charger stopped working after updating to iOS 6, help!

Wifi iPad 3 charger stopped working after updating to iOS 6. The little iPhone charger charges it very very slowly, but the charger gets really hot after a while. I restored it and everything works but the charger. It's only a few months old, should I try a new iPad wall charger block?

Hi,
I did this after reading the forums and it made no difference. it has actually charged from 14% to 67% but thats taken over 12 hours.
Will monitor it and if no joy will go to a apple store
Thanks

Touch screen L2105 always stops working after a few minutes

I have windows 8.1 and the touch screen always stops working after a few minutes- ie. the touch operation via USB, the screen itself is OK.Have tried windows switching power saving off, but no help
charsepp

Hello charsepp,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that the touchscreen stops working after a short period on your HP L2105 Monitor. The first thing you are going to need to do is determine if this is a monitor or PC issue. To do this you should try connecting the monitor to another computer and see if the issue persists.
If the issue does not persist it is the computer, and if your computer is also HP I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running? Is the Windows Version on My Computer 32-bit or 64-bit?
If the issue persists when you try the monitor on another computer then the issue appears to be a physical issue and I think it would be best if you contacted HP technical support for repair options.
US support link to contact options for HP products purchased in the US.
Outside of US support link to contact options for HP products purchased outside the US.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

I have upgraded iTunes now it stops working after a few seconds.Help?

i have upgraded iTunes now it stops working after a few seconds.Help?

Hi Andrew,
If you have issues with iTunes unexpectedly quitting you may find the troubleshooting steps in this article useful -
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
If you are using Windows XP, you may want to use this article -
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
Thanks for using Apple Support Communities.
Best,
Brett L

CS4 OpenGL stops working after a few minutes of painting

Hi,
CS4 OpenGL stops working after a few minutes of painting. It doesn't seem to have anything to do with the amount I paint. If I save the file, then reopen I can paint for another few minutes before the opengl stops working. Is this a standard problem with CS4? Is there a solution? Thanks! PJ
System Specs:
Windows XP SP3, updated
Latest DirectX & all software updated
Nvidia Geforce 9600 GT 512MB w/ latest driver
Athlon64 X2 Dual 3800+
2GB RAM
Photoshop CS4

Joining the party...
I am having the EXACT same issue, PLUS my Wacon PTZ-430 only works for a fewminutes then, when the Open GL craps out, so does it... but only certain aspects. The cursor still moves, it just will not paint. Mouse will (direct via USB) but the tablet won't. If I delete CS4 prefs, then the Wacom works fine... for a while. Latest Wacom drivers and bee on the phone w them. All is fine under CS3.
From DXDiag:
System Information
Time of this report: 12/8/2008, 15:37:52
Machine name: VM-EDITING
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.080814-1236)
Language: English (Regional Setting: English)
System Manufacturer: VELOCI
System Model: 122-CK-NF68
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz (2 CPUs)
Memory: 2814MB RAM
Page File: 1049MB used, 3652MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
Dual Monitor:
NVIDIA GeForce 8600 GT
Manufacturer: NVIDIA
Chip type: GeForce 8600 GT
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0402&SUBSYS_043910DE&REV_A1
Display Memory: 256.0 MB
Current Mode: 1920 x 1200 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0011.7824 (English)
DDI Version: 9 (or higher)
Second:
Card name: NVIDIA GeForce 8600 GT
Manufacturer: NVIDIA
Chip type: GeForce 8600 GT
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0402&SUBSYS_043910DE&REV_A1
Display Memory: 256.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0011.7824 (English)
DDI Version: 9 (or higher)

Why does my iPod Shuffle stop working after a few songs?

I had my iPod Shuffle for about a month now and it's already causing me trouble.
I would play a couple of songs, but when I go to change it, it stops working. I turn it off and on again only to have it take me back to where I started off at (e.g. Let's say I have 100 songs, I start at 50 and I get to 55 before it shuts off. When I turn it back on, it starts at 50 all over again). This process would happen over and over again with seemingly no end.
So my question is, why does my iPod Shuffle stop working after a few songs and how can I fix it?
I already tried using the iTunes troubleshooting guide, but nothing worked.
Details -
4th Generation
I only use it at the gym or when I'm running
I've only used the Apple products that came with it so far
(e.g. charger, headphones, etc.)
881 MB are still left
Music stops randomly, no common number or pattern

I had the same problem, I purchased a new ipod shuffle, followed the instructions but it would stop after a few songs and I would have to shut it off, wait and turn it back on and it would go back to the same song and then once again, after a few songs it would shut off. I returned the ipod and got another one, same thing happened. This is how I resolved the issue.
1. open itunes, make sure its up to date, then connect your shuffle to your pc
2.on the left of the itunes window, select your ipod, then at the top select music then check the sync box and select "selected playlists"
3.then go back and click on your ipod on the left, a message will appear just select apply
all of your music should be emptied from your ipod.
4.delete all of your playlists on the left, this will not delete anything from your library. Delete the "purchased" playlist under itunes store on the left as well, once again this will not delete anything from your library
5.There should be an arrow just in front of your ipod, click on this arrow and you should see your music file for the ipod appear, this should be the only file that you see, everything else should be deleted.
6. go to your music library and check only the songs that you want to load into your ipod. Double click on each song to make sure that they all play.
If you find a song that does not play you should be asked to authorize it, don't waste your time that did not solve the issue for me, instead cancel to authorize the song and then delete the song and move it to recycle bin. Once the song is deleted a cloud should appear, click on the cloud and download the song again, when done, make sure the song plays and that it is checked.
7.After you have made sure that all of the songs play and are checked, click on your ipod once more, located to the left, check the box "sync only checked songs" then from the top select music. In the music window select "sync music' and then select "entire music Library"
8. Go back to the left and click on the arrow in front of your ipod, you should see the music file, click on the music file and you should see all of your music being loaded to your ipod.
9. When all of the music is done loading, eject your ipod by clicking on the arrow located after the battery symbol where your ipod appears on the left
10. Turn on your ipod and scroll through your songs to make sure that the problem is resolved.
Not sure if all of this was necessary but it worked for me.

Flash player stops working after a few days.

I'm recently having issues with flash player on IE and Firefox each time a new version is released. This time the flash player stops working after a few days without any reasons. I have asked two other questions and I have tried the solutions but this time they are not working:
http://forums.adobe.com/message/4617987#4617987
http://forums.adobe.com/message/4548211#4548211
Could anyone tell me what the reason is?
I also need links providing Flash player for IE and Firefox which are always updated. I need to first download the installer then install it offline not install it directly from adobe website.
Please help me solve this once forever!
Message was edited by: sia1989

I'd suggest trying a clean install: How do I do a clean install of Flash Player?
For offline installers, please see this help document: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header

I tunes stop working after a few minutes

i tunes stop working after a few minutes

of course i did.
this is my launchpad report about this problem:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1330867
merged with this report because this two are exactly the same:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1038479

On my iPad power button stopped working

On my iPad power button stops working . Is it any software problem ?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

Why does the ipad 2 speaker stopped working after upgrading to ios 8

WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond

Hi A_S85,
It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
Follow these steps and test the sound after each one.
Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
Restart your device.
Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
Go to Settings > Bluetooth and turn off Bluetooth.
If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
If the device is in a case, make sure that the case doesn't block the speaker.
Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
Update your device to the latest version of iOS.
If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

Touchscreen stops working after a few seconds on new iPad 2

The touch screen would stop working completely a few seconds after turning on. The iPad is still running fine -- Home/Power/Volume buttons work perfectly. But not the touch screen. I can not control the iPad except turning it on/off or turning the volume up/down.
Tried resetting the unit by holding Home and Power buttons. Still the same issue after rebooting.
Tried restoring the iPad completely from iTunes. With a clean iOS the touch screen still doesn't work.
Leaving the unit untouched for a few hours, then the touch screen would start working again.... for another few seconds. Then it stops working.
This is a replacement iPad which Apple Store gave me, but I'm out of the country now and there is no Apple Store where I am. How can I get this fixed?

1. i connect the device to usb power
The Stor.e Wireless Adapter should be connected to mains power and the other end to the external HDD.
Then you could use the app to access the content wirelessly.

My iPad 1 has stopped working after trying to instal iOS 5. Can you help restore?

My iPad has stopped working after trying unsuccessfully to instal iOS5. All that's currently showing on the iPad screen is a white USB cable with a thick arrow pointing towards the iTunes logo (black double note within a white rimmed circle and a blue background).I cannot switch it off and have seemingly lost everything that was on it.
Please help!

That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
iTunes: Restoring iOS software

Iphone 4S sound issue - sound stops working after a few minutes

The sound on my iphone 4S stops working after a couple of minutes, including both the headphones and the loudspeaker. If I unplug the headphones and replug them in, the sound starts to work again, but only for a few minutes until it conks out again. How can I fix this problem?

Any problem when connected to another wi-fi network besides your own?
The only additonal troubleshooting options after powering the iPhone off and on, an iPhone reset, and resetting network settings on the iPhone is restoring the iPhone with iTunes from the iPhone's backup and/or restoring with iTunes as a new iPhone or not from the backup.
If no change after restoring as a new iPhone or not from the backup - the same when connected to any wi-fi network besides your own as well as not being able to maintain internet access when connected to your carrier's cellular network, the iPhone has a hardware problem.

The audio in "speak screen" stops working after a few uses. IOS 8.2 did not fix this problem unfortunately. I'm using the Alex voice on a Sprint iPhone 6 plus- if that matters.

I really enjoy the speak screen feature, as the voiceover is too inconvenient and tricky to use. The speak screen option works oerfectly for reading, and helps me as I'm dyslexic. However, the Alex voice stops working after the initial use or soon after. I then have to restart the phone every time in order to get the speak screen to acruelly speak again. Really annoying and was hoping that IOS 8.2 Would fix this, but it appears it had not fixed this bug. Any help with this?

Any problem when connected to another wi-fi network besides your own?
The only additonal troubleshooting options after powering the iPhone off and on, an iPhone reset, and resetting network settings on the iPhone is restoring the iPhone with iTunes from the iPhone's backup and/or restoring with iTunes as a new iPhone or not from the backup.
If no change after restoring as a new iPhone or not from the backup - the same when connected to any wi-fi network besides your own as well as not being able to maintain internet access when connected to your carrier's cellular network, the iPhone has a hardware problem.

Ipad power cord stops working after a few months

Similar Messages

Maybe you are looking for