Ipad power off and locked while downloading video

Hello Friends.
In my application am downloading my video from server. When video downloading after some time ipad power going off and lock. i used idletime disable for that but i did not work properly. Is there any other way to from code to ipad not going in locked or power off mode ??

Have you tried resetting your ipad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost.

Similar Messages

  • HT5278 Since updating my iPad 2 to IOS6 and activating my icloud for backup, my iPad has permanently locked. Message on screen is "iPad Not Backed Up". I click ok but no response. Cannot turn power off and cannot restore via my pc itunes. What are my opti

    Since updating my iPad 2 to IOS6 and activating my icloud for backup, my iPad has permanently locked. Message on screen is "iPad Not Backed Up". I click ok but no response. Cannot turn power off and cannot restore via my pc itunes. What are my options?

    Thanks to everyone who responded and related subject helped. Holding the home button and power button simultaneously for 10-15 seconds does unlock the screen. I can now use my ipad again. However, a futher problem has arisen since updating to IOS6 and activating icloud at same time, Although not sure if its related. The problem is that when connected to my PC the itunes message appears 'Cannot read ipad'. It instructs you to restore but keeps timing out after about 1 hour. This maybe internet issue but can't understand why itunes cannot read my ipad. May need to completely erase all content & reset. Or any other suggestions why this has happened?

  • Firstly I updated my ipad into ios7 and after watching the video by Apple, iWork, pages and numbers are free for download after updating iOS 7. How can I download iWork pages and number for free?

    Firstly I updated my ipad into ios7 and after watching the video by Apple, iWork, pages and numbers are free for download after updating iOS 7. How can I download iWork pages and number for free? Please help me.

    stevejobsfan is correct; iwork for ios is free only for new purchases of new ios devices. A good work around (if you have wifi connectivity) is going to the icloud website on your ipad, and working on your document.
    A word of caution (the real reason I am responding to your post). If you do a lot of 'formatting' of a document on iwork for mac, and then save it in icloud; you will probably loose most of the formatting you have done (this will be true if you oppen the document in iwork for ios; also) It happened to me, and I did not duplicate the document before saving it to icloud; I lost at least an hours worth of work.

  • Ipad 2 is stuck in soft reset cant power off and not recogized in itunes

    After deleting the Facebook app i did a soft reset on my ipad 2 and now it is stuck on the black apple screen. ipad will not power off and i have it plugged up to itunes and still nothing. Attempted multiple soft resets again. Please help.

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Is power off and on again the same as 'reboting' iPhone?

    To reboot the iPhone due to playing a big game or whatever other reason - To refresh lets say.
    Is turning the power off and on again the exact same thing as holding down power and the home key together?
    Is there really any difference?
    -Frankie

    This is what I tell everyone.
    Think of it this way, the iPhone is more of a computer than a phone. It suffers from being a new OS and nobody can deny there are not bugs and memory leaks. The longer left running, the more things start to fail or slow down (I have had the iPhone since day one of original phone and I am just speaking from my experience). Thus I equate it to like when Windows95 came out...not sure of your age or if you remember those days...but back then it was a running joke of how many days you can keep Windows 95 running before you had to reboot. I am sorry to say but the iPhone is the same way right now (but getting better with a few hiccups back during the 2.0 release). So for me, I reboot daily when I leave in the morning and take it off the charger. By doing so I rarely see any lag or problems.
    A reset/reboot is:
    Go to Home Screen
    Press and Hold Home Button
    Keep holding and press and hold Lock Button
    Keep holding Both
    You will see Slide to Turn Off (Don't let go to slide, just keep holding)
    The phone will turn off (in time, but screen will look like it has some white lines)
    Keep Holding
    When you see the Apple Logo, you can let go.
    Turning off via the Slide to Turn off while good and fine to turn off, is more like the Sleep Mode on a computer. Thus any locked up issues in memory remain when you turn back on. A reboot as described is like doing a real Turn off and Turn On on a computer.
    You may also wish to read this tread about reboots and odd application behavior.
    http://discussions.apple.com/message.jspa?messageID=5851978#5851978

  • My iPhone 5 continues to power off and on every 10 seconds

    My iPhone 5 continues to power off and on every 10 seconds. It'll turn on, the apple icon appears, it then goes to my lock screen pretty quickly, then shuts off and does it all over again. How can I fix this? If I have backed up my phone to iCloud will I lose things like my notes and pictures?

    Hey kenziephipps,
    To make sure we are on the same page, you cannot keep your phone powered on as it turns off right after you see the slide to unlock screen after booting up. I would advise to try to restore your iPhone by following the steps in the article below. To answer your second questions, you should have it all backed up in iCloud like you said you did unless you made changes to what is backed up. With that if you did not make any changes you will have it backed up. 
    If you can't update or restore your iPhone, iPad, or iPod touch
    https://support.apple.com/en-us/HT201263
    Take care,
    -Norm G. 

  • IpodT auto redirects to the power off (slide) option while in use. Then while not using it, it will not power off to conserve the battery. I have to enable the assistive touch to save battery life. Software is up to date with 6.1.6.  PLEASE  HELP!

    version 6.1.6(10B500); model#MC547LL/A; 60GB (40 used/20 avail)
    IpodT auto redirects to the power off (slide) option while in use. Then while not using it, it will not power off to conserve the battery. I have to enable the assistive touch to save battery life. Software states up to date with iOS 6.1.6.  PLEASE  HELP!

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • This mini is operating OSX 10.6.8 and trying to update to Mountain Lion but upgrade stops and a black overscreen displays saying to power off and power on.  The upgrade fails.  What's the problem?

    This mini is operating OSX 10.6.8 and trying to update to Mountain Lion but upgrade stops and a black overscreen displays saying to power off and power on.  The upgrade fails.  What's the problem?

    Hi Fred,
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

  • HT201263 I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. I tried to charge and not charging. What I should do now?

    I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. iPhone alerming low charge and I tried to charge and not charging.
    What I should do now?

    Something has gone wrong. Turn your phone off, then force it into recovery mode:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, select "new".

  • The sound goes off and on while typing on keyboard

    The sound goes off and on while typing on keyboard

    I would try to power cycle the device by holding the sleep/wake button till is says turn off. Maybe even reset by holding the sleep/wake and the home button at the same time. by chance if none of that works back up your device and restore it. Sounds like a software issue so that should fix it. You could always contact apple support aswell.

  • Suddenly my ipod power off and it remained off

    Hi,
    My 4 day old ipod nano Suddenly fot power off and its remained same. Its not power off. I tried to connect with pc. It is not responding. I can't on it. I tried to restart it with the hold button on-off and holding the menu and center button 10 seconds. It is responding at all.
    Plz Help.

    your ipod is currently carrying very little battery, which is not sufficient to turn your iPod on, can you connect it with an iPod wall charger or an iPod speakers dock system i.e. iPod HiFi.
    If you cant find, please try to do a Reset while your iPod connecting with your PC

  • My ipone6plus is auto power off and cannot open?

    Iphone 6 plus auto power off and cannot power on about 1 hours ago?
    Please answer me why?
    I had been try to pressed the home button and lock buttom so many time but cannot on.

    won't appear the any signature from screen too.

  • Turning off and locking it?

    How do you turn off the touch?
    How do you lock it?
    Thanks.

    Press the top button to lock
    Hold the top button and and wait till it says slide to power off and slide the slider

  • My iPhone 5 keeps turning off and on while charging

    I am trying to restore my iPhone 5, but it keeps turning off and on. It also turns off and on while charging. Is there anyway I can fix this? I did update it to the newest iOS.

    Hi terikins!
    Here is an article that can help you troubleshoot this issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • I have been able to wake my macmini by hitting the space bar - but since installing 10.7.4 using the 1.4Gb combo this wake method no longer works. Now the macmini shuts down, and I have to switch mains power off and on again before powering up the macmini

    Since purchase of my macmini (2011 model) I have been able to wake it from sleep by hitting the (wired) keyboard space bar.
    However, I recently updated the OS to 10.7.4 using the combo (1.4Gb) update, since when I cannot wake the macmini in that way.
    Now, after putting the macmini to sleep, pressing the spacebar causes it to shut down.
    I then have to switch mains power off and on again at the wall socket, after which the macmini starts up from shutdown condition.
    I am by no means an expert, and have not been fiddling with settings, so I am in need of advice on what could need resetting to allow me to return to the previous simple 'wake up' approach!
    Thanks.

    Reset the SMC > Intel-based Macs: Resetting the System Management Controller (SMC)
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    Followed by resetting the PRAM > Resetting your Mac's PRAM and NVRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.
    Then if those do not fix the problem, you may need to reset your Energy Saver and Keyboard Preferences by readjusting them.

Maybe you are looking for

  • ABUMN Intercompany Asset Transfer

    Hi All, When doing intercompany asset transfers using transaction ABUMN for few assets investment order is picked up in line items and for few assets it is not getting picked. Client want to know why this is happening and can we avoid it. In both cas

  • Mac in a Windows domain

    Hi How do i bind mac to a windows domain? I would appreciate it, if you provide me the steps.

  • KP06 Planning

    Hi:          In KP06, i have there are fields like cost center(group) and cost element(group). I have created a cost center Canteen costs and have given it in KP06, i want to ask that in cost element field do i need to give cost element relevant to t

  • Faces / Places and MobileMe Gallery?

    Hi all, I have all my photos stored on MobileMe, which were uploaded from my Mac at home, which had faces and places all set up. However, I've just set up iPhoto on my MacBook Air, to just use the MobileMe galleries (to save hard drive space), and th

  • HT1451 I am trying to restore my iphone but its stuck at the apple logo with the progress bar. What should I do?

    I am trying to restore my iphone but it has been stuck at the apple logo with the progress bar and it shows no signs of loading at all. What should I do?