IPad preview strange behavior

Hi there,
In Preview mode its like the design loads, jumps and then quickly disappears and then reloads correctly. Is this normal behaviour in Preview mode? ?
Thanks,
Elisabeth Bertrand
Chief Editor
Italy Tourism Portal Dolcevia.com

Hello,
The preview just takes some time to adjust according to the screensize that you choose which is why it first loads a default size and then adjusts according to the tab.
This is a default behavior and we encourage our users to preview in Browsers (using File>preview page/site in Browser) which is a better option.
Regards,
Sachin

Similar Messages

My ipad2 is getting lazy with the wifi. On any router it doesn't get the signal by itself, unless I'm so close that the pad and the antenna are touching. Other solution, to turn off and on again the wifi button on the iPad. This strange behavior is new...

My ipad2 is getting lazy with the wifi. On any router it doesn't get the signal by itself, unless I'm so close that the pad and the antenna are touching. Other solution, to turn off and on again the wifi button on the iPad. This strange behavior is new, before my iPad was blazing fast at getting any known wifi connection. Sme help please ??

it sure sounds like the battery is defect

ITunes U - strange behavior

Hello, palls.
I just Install iTunes U app on my iPad and its behavior pretty strange:
it can not remember, which course I subscribed allready
it freеzzеs partialy after one or two subscirptions (I can not open another courses)
it do not shut down video sometimes, after exit from preview (I can hear as it plays from bg layer)
and now, OMG, it starts slowly rename the categories to korean
It's very disgracefull for Apple, publish such buggy apps

UPD:
Oh my god! Random language every time?

Report FP_TEST_00 - Strange behavior

Hello Gurus,
A strange behavior with report FP_TEST_00 occurs:
SA38 --> FP_TEST_00 --> select a device --> execute --> print preview then and error or popup is show:
Adobe Reader
Error initializing the font server module
Then the SAP GUI is closed, I check the ST22 and no dump is generated and in transaction SM21 only appear:
DP Q0 4 Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
DP Q0 I Operating system call recv failed (error no. 232 )
The #1 log entry: *
Details Page 2 Line 28 System Log: Local Analysis of sapdev                   1
Time     Type Nr Clt User TCode Grp N Text
11:37:20 DP                     Q0 4 Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
Details
Recording at local and central time........................ 25.02.2010 11:37:20
Task...... Process    User...... Terminal Session TCode Program Cl Problem cl         Package
11092      Dispatcher                                           K SAP Web AS Problem STSK
Further details for this message type
Module nam Line Error text..........              Caller.... Reason/cal
dpxxdisp   1223 551 ADMIN       86 HUSVP-SAP-BA DpRTmPr    NiBufRe
Documentation for system log message Q0 4 :
The SAP Dispatcher (part of the application server) has lost the
connection to a terminal process. For example, this happens when the
terminal program (GUI) terminates without correctly logging off the
application server. More detailed information about the error
context is not available here.
Technical details
File Offset RecFm System log type             Grp N variable message data
   21 254340 m     Error (Function,Module,Row) Q0 4 551 ADMIN       86 HUSVP-SAP-BA     DpRTmPrNiBufRedpxxdisp1223
The #2 Log show: *
Details Page 2 Line 29 System Log: Local Analysis of sapdev                   1
Time     Type Nr Clt User TCode Grp N Text
11:37:20 DP                     Q0 I Operating system call recv failed (error no. 232 )
Operating system call recv failed (error no. 232 )
Details
Recording at local and central time........................ 25.02.2010 11:37:20
Task...... Process    User...... Terminal Session TCode Program Cl Problem cl         Package
11092      Dispatcher                                           K SAP Web AS Problem STSK
Further details for this message type
Module nam Line Error text        Caller.... Reason/cal
nixxi.cp   4435           recv232 NiIRead    recv
Documentation for system log message Q0 I :
The specified operating system call was returned with an error.
For communication calls (receive, send, etc) often the cause of errors
are network problems.
It could also be a configuration problem at operating system level.
(file cannot be opened, no space in the file system etc.).
Additional specifications for error number 232
Name for errno number ECONNRESET
No documentation available for error ECONNRESET
Technical details
File Offset RecFm System log type             Grp N variable message data
21 254520 m     Error (Function,Module,Row) Q0 I           recv232                     NiIReadrecv   nixxi.cp4435
Edited by: Hernando Polania Cadena on Feb 25, 2010 8:36 PM

Hello All,
I applied the solution in page
http://wiki.sdn.sap.com/wiki/display/PLM/Adobe%209%20-%20SAPGUI%20crash
Works OK
Thanks
Hernando

Strange behavior when I try to match a mpeg2 video with the menu size image

hello all,
got a strange behavior when I try to match a mpeg2 video with the menu size image,
menu size is 1920 x 1080 (photoshop file)
mpeg2 video 1920 x 1080 (1second 19 frames)
the idea is to go from the menu link to the next sub menu with a video as transition, using the same image on the video as the menu and then zooming in (in my case through a door) to end up after the zoom in the next level menu.
I try to achieve a smooth change from the first play menu picture to the video image into the next level menu picture,
everything works good but when I watch it on the preview mode on the left and right side of the video it shows a black bar at least 15 to 25 pixel wide, that means the video image appears smaller and it causes a little jump what is preety disturbing and can not be sold as a professional work.
why encore treats the video size and picture differently?
it's gratful appreciated if somebody who got experience in a transition I mentioned obove posting any solution,
thankl you all

Hi all
I'm having a very similar problem with Encore. My menu items are distorting (a minor but infuriating squashing top and bottom) when previewed.
Using Encore,PS,AE CS4
DVD format SD PAL DV widescreen
I created 3 menu frameworks and 3 video transistions to link them in AE. On the final frame of each transistion in AE I saved the frame with Composition>Save Frame to> Photoshop Layers. In PS i added the button functionality and saved.
In Encore I use Dynamic link to import AE transistions as timelines and imported each PS menu twice, once as "menu" and once as an asset.
When I link the timeline transistions to the menu and preview at the point the menu begins the whole image is squashed. When the next transistion is activated the image returns to its original size.
Thinking it was the use of PS that was causing the menus to distort I used the menu asset directly in the time line. Obviously no menu functionality but also no distortion. The AE transistion flowed straight into the "menu" just as I expected.
In the properties panel the menu Aspect Ratio 16:9
The AE transistions PAR is SD PALwidescreen 1.4587.
I did try the Blu Ray suggestion above but the same distortion was apparent.
Any suggestions short of squashing the video to match the menu would be welcomed.
Thanks

Strange behavior after using NIK plug-ins

Every once in a while I encounter this strange behavior of Aperture. I first process the NEF's in Aperture (white balance, Exposure, Enhance... and, when needed, Cropping) and then I fine tune the image with the NIK plug-ins; when needed DfIne 2.0, Viveza, Color Efex Pro 3.0 and Sharpener Pro 3.0 Output Sharpener.
If I look at the processed picture then, I get a perfect presentation of the photo;
!http://users.skynet.be/fc419085/Aperture-1.jpg!
But when I press Z to zoom into a 100% preview I get this;
!http://users.skynet.be/fc419085/Aperture-2.jpg!
When I select the Loup in the normal view mode I get this;
!http://users.skynet.be/fc419085/Aperture-3.jpg!
This doesn't happen with all my pictures, yesterday I processed a series of 8 pictures an 6 of them showed this behavior the other two acted normal and I can't see what I did differently whit these last two.
When I export the strangely behaving photo's to a Tiff or a Jpeg, I get perfectly normal pictures.
The original NEF behaves normal. I have seen this behavior with NEF's from a Nikon D200, D2x and a D300. I have Aperture 2.1.2 running on a 2.33 GHz Intel Core Duo MacBook Pro running Mac OS X 10.5.6
Does anybody know what's happening and if so, how to solve this problem?
Cheers,
Ivan

I did some testing and what I found is too weird to be true.
First this mashed up look doesn't only happen after using NIK plug-ins, it also happens when making a roundtrip to Photoshop, given that certain conditions are met.
Give it a try yourself. Crop an image to an uneven pixelcount dimension, for example 4227 x 2797 and make a roundtrip to Photoshop. Then have a 100% view look at the new image in Aperture. You'll have a mashed up view, at least I do.
Now crop the same original image to an even pixelcount dimension, for example 4228 x 2798 and make an roundtrip to Photoshop once more. When you have a 100% view of the new image now, you'll see a perfectly normal photo.
Do you think Aperture developers are reading this forum?

Strange behavior in deleting images - works on second but not first try

In Library mode, Grid view, right after importing, after I select several images with an "x" to be deleted, when I bring up the "Delete Rejected Photos" dialog, I find this strange behavior. I get the message that there are not photos marked for deletion. I then invoke the dialog again, and my photos that were marked show up, with the choices of deleting from disk or removing from the catalog. What am I likely doing wrong? I'm on WinXP Pro with LR 2.2. Thanks!
Dilip

Dilip,
I too have seen this behaviour in all versions of LR. Even when deleting a single image in the develop module. If LR is writting the preview you can't delete the file until the preview is rendered. I think it's more to do with the OS not allowing the deletion of a file being accessed than a LR bug as such.
Gordon

Strange behavior of the notifications

Hi guys.
I use an iPhone 5S running iOS 7.0.3 and have a strange behavior of the notifications.
Example:
I get 3 messages from WhatsApp.
The lock-screen shows the preview of all 3 messages. OK so far.
But if I unlock my iPhone, a banner shows the latest message and the app-badge shows only 1.
This I have with other apps too.
This was not with older iOS versions
All settings looks OK. Do you have an idea?
Thank you, Tom

Because you are comparing floating point numbers.
For example 0.1 cannot be exactly represented in binary, so repetitve additions will probably not end in an exact integer later.
From the three inputs you can calculate the number of values exactly, and use a FOR loop. Don't use convoluted code....
Why don't you simply use ramp pattern?
LabVIEW Champion . Do more with less code and in less time .

Method cellForRowAtIndexPath if (cell == nil) {} condition strange behavior

This tableView’s are making me crazy. I just tested this behavior on new test project (iPad) with one tableView. I added 30 sections with one row per section and put this line inside if( cell == nil ) {} condition in cellForRowAtIndexPath method:
NSLog(@”Creating cell %d”,indexPath.section);
When I launch application I get this in output:
Creating cell 0
Creating cell 1
Creating cell 2
Creating cell 20
Creating cell 21
Only 22 cells are visible on first run. That’s ok, tableView created only cells that are visible. So far so good.
But when I scroll down to see the rest of the cells (8 other cells) the console only shows me this:
Creating cell 22
Why did tableView skipped creating last 7 rows and used them from queue instead? isn’t that kind a strange behavior? Or maybe is this a bug in apple’s tableView? Or maybe I am wrong and don’t quite understand the background of tableView reusing…?
Any help appriciated, thanks!

Ok, I find out that this is normal and native behavior for tableView's.

LivePreview strange behavior

I experiencing some very strange behavior in a Live Preview
swf.
I have a component extending UIComponent containing a Timer
with a external Live Preview swf set up using LivePreviewParent as
the document class.
Generally, Timer events fail to dispatch. Except... when I
first open the file using the component. I see trace output
indicating that the events are dispatching, however, the component
is invisible. As soon as I click on the stage, the component
appears and triggers the draw() method. But, the Timer gets
instantiated again and events don't dispatch.
Is there an explanation for this? Am I coding something
incorrectly?

Please specify what kind of error you are getting and what is command you are firing on Unix.

Strange behavior when "trying" to burn a disk.

At least I think this is strange behavior, following the instructions in the help viewer, topic "Backing up your music to a CD or DVD." One thing for sure, it's not burning a disc and it ain't telling me why.
I select the playlist and click "Burn Disc"
Requests a blank disc. I insert one.
Message "checking media"
after about a minute, the disc ejects
Message "checking media" displays another 30 seconds
No other messages displayed.
What the ??? Shouldn't it at least display an error message??
Super-Drive information..... from System Profiler
MATSHITA DVD-R UJ-845C:
Firmware Revision: DPP9
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
Using Sony DVD+R discs.
Mac Mini Mac OS X (10.4.8)

Whoops, sorry, this was while burning a playlist.
I've also tried some Pleomax CD disks (Samsung), with no luck. I've tried burning directly from iTunes, and from Toast 7.
Of the types I've tried, the Sony DVD's have been the best for me. Haven't tried many types though. Maybe I can get disks one at a time until I find a brand my burner likes.
Still, isn't it strange that there is NO error message? It just quits?
Mac Mini Mac OS X (10.4.8)

Strange Behavior with gMSA in Server 2012 R2

Greetings,
I have been doing some testing with gMSA Accounts in a Server 2012 R2 environment (two separate environments, actually), and I have noticed something very strange that occurred in both environments, which does not appear to be occurring in one of our customer's
self-managed environments.
We created a Group Managed Service Account using the following article:
http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
Everything went smoothly, and the account installs/tests successfully on both of the hosts that we are testing on. I am able to set my services to run under the account, and most of them appear to work fine. I am having some issues with a few of my services,
and I believe that the strange behavior I am seeing may have something to do with this - described below:
As soon as I set the service's Log On Account (via the Log On Tab under the Service's Properties), the entirety of the "Log On" tab changes to "greyed out," and I am unable to change the Log On account back via the GUI (Screenshot
attached).
I found that I am able to successfully change the account via Command Line using sc.exe, but the Log On tab remains greyed out! So far, I have found nothing to remedy this, but confirmed that it happens for any service I set to use the gMSA as the Logon
Account, and that it happens in 2 separate test environments, but not in a Customer's production environment - very strange.
All servers in this environment are running Server 2012 R2, and domain Functional Level is currently Server 2012.
I have been unable to find any information online about this behavior, so I am hoping someone has seen this before, and can explain why this is happening.
Nick

VIvian,
Yes, we used the Install-AdServiceAccount gMSA command on each host using the gMSA account, and then ran Test-AdServiceAccount gMSA, which returned "True."
However, one thing I noticed is that if I run Test-ADServiceAccount gMSA as a Local Administrator, it fails with the following:
PS C:\Users\Administrator> Test-AdServiceAccount gMSA$
Test-AdServiceAccount : The server has rejected the client credentials.
At line:1 char:1
+ Test-AdServiceAccount gMSA$
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : SecurityError: (:) [Test-ADServiceAccount], AuthenticationException
    + FullyQualifiedErrorId : ActiveDirectoryCmdlet:System.Security.Authentication.AuthenticationException,Microsoft.A
   ctiveDirectory.Management.Commands.TestADServiceAccount
If I run Test-ADServiceAccount gMSA as Domain Administrator, it returns true:
PS C:\Users\Administrator.<domainname>> Test-AdServiceAccount gMSA$
True
Is this normal?
Overall, I think the issue I am running into is at the Application Level, and not a problem with the gMSA, as it appears to be working. (Can Start/Stop services without any issues). I will be investigating my issue further with 3rd-party vendors, unless
you think there is something wrong with my gMSA accounts based on the information I have provided.
Nick

Strange Behavior from iTunes 7.2

Running itunes - 7.2Recently had my itunes library “corrupted” or non functional.
Spent a long, long time rebuilding the library (see below) and noticed some strange behavior that has me terrified that itunes is corrupted and I am going to loose all the hard work, etc..
1. I have about 100 GB of music in various formats (apple protected/itunes store, mp3 (128 to 320), apple lossless, wav) and when I tried to rebuild the library by clicking on add to library it only added about 65 GB of the 100 GB. I had to go through and figure out what was missing and manually choose the specific folder when I added it.
Major pain and very time consuming.
So it is not adding songs correctly, but through way too much effort able to work around this.
2. About ½ of the itunes store tunes I purchased are no longer apple protected format. Somehow they were converted to mp3 at 192kbs. Some of the songs play fine others are now not as crisp and make a poping sound or skip. How could this happen? Are these files corrupted? Will I loose them?
3. At the top center of itunes the information bar, where the read out is for what song is playing and how much time has elapsed in the song, is not working. When I click on a song it starts playing but the elapsed time bar and counter never move, and when the next song starts playing the information never changes. It is stuck on what ever song you initiate play with by clicking on it and the information stays frozen.
4. itunes randomly stops playing at the end of a song….If listening to an album it is usually after three or four songs and when listening to a play list it is usually after one song.
I am afraid itunes is corrupted and will not function correctly and I am going to loose the hard work I put in trying to recover from the last crash.
Any suggestions??
Can’t wait for time machine. I hope it works as advertised. If so I could just go back in time to the last time iTunes worked correctly and go from there.

First of all I hope that you have a good b/u of all your tunes - either on ext HD or on DVD. Don't forget to b/u the iTunes Library and .xml files at the same time.
Have you tried to reinstall iTunes? Drag the app to the trash and remove the iTunesX.pkg from HD>Library>Receipts>iTunesX.pkg. Using a fresh .dmg of iTunes 7.2 reinstall.
Have you repaired permissions with Disk Utility?
Is your Quicktime up to date? At least version v7.1.5.
MJ

Strange behavior - icon thumbnail instead of image - CC@OSX10.10

Hi,
my CC (@OS X 10.10.3) showing a strange behavior using vanishing point filter.
After defining grid and try to paste the image OS X paste the icon thumbnail instead of the image,
Many thanks in advance!!
br
Joachim

It is probably related to the fact that you are setting the tables row height in the renderer this will fire a render message when the height changes. One height is applied to all rows of a table. This means that is you have images of different heights you are continually changing the tables row height and therefore continually rendereing.
My approach would be to have all the images fit into a set size ( say 64*64 ( with scaling if neccesary ) you could then have a popup show the full size image if required.

Strange behavior in report Output

Hi,
Strange behavior in report output , please some one help me out of this problem.
I am using Oracle order capture rdf file ASOPQTEL.rdf.
My working environment:
Windows,apps instance .Now this rdf file is working fine in my work Environment.
when this same file is deployed in client environment (UNIX and different apps instance from my working environment apps instance)
for some cases it is giving output.
for some cases it's throughing error.
Thanks,
Mithun

Please specify what kind of error you are getting and what is command you are firing on Unix.

IPad preview strange behavior

Similar Messages

Maybe you are looking for