IPad / RDC 8.1.5 to Server w/RDS Gateway Unsuccessful

Hello,
I'm getting a message stating the following:
"We couldn't connect to the remote PC.  Make sure the PC is turned on and connected to the network, and that remote access is enabled.  If this keeps happening, ask your admin or tech support for help."
A few things:
1) I am connected to the internet & I'm outside of the corporate LAN
2) Regular RDP connections from my Windows PC works
3) The server uses an RDC gateway and this is setup on the iPad
4) I've triple checked my settings to no avail.
Anyone else having this issue?

hso04,
Few questions :
You said
"Regular RDP connections from my Windows PC works" , so is your Windows PC from where you are able to connect inside the Corporate LAN network or is it outside the network ?
- I'm outside of the LAN.
Also , does your RDP work from a PC when you are  connected
to the internet & I'm outside of the corporate LAN ?
- Yes, I can RDP from my Windows 7 machine from outside the LAN.
Can you make sure that the resource that you are trying to access is available on the Internet and is not
restricted to the Corporate LAN ?
- It is available - other people can connect fine as well but not via iOS devices.
Anantesh

Similar Messages

  • Can anyone help - my mail on my ipad will not connect to the server. My internet access is fine. How can I get my email to connect to the server?

    My ipad will not connect tot he server when trying to access my mail. This has been happening since last Sunday. Some have said it is due to the latest software update. I am able to connect to the internet.
    I am not having this issue on iPhone.
    I checked all the settings, the wireless router in my house and at work.
    I have completed a hard reset of the device.
    I had our IT guy at work look at it.
    He said to contact Apple....
    Any thoughts?
    Thanks!

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
    http://support.apple.com/kb/TS1944
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say “Cannot Connect to Server”?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    Gmail Account Will Not Connect to Gmail Server
    http://support.apple.com/kb/ts3058
    Error: “Server Unavailable” when accessing Yahoo on iOS devices
    https://help.yahoo.com/kb/mobile-mail/error-server-unavailable-accessing-yahoo-i os-devices-sln8834.html?impressions=true
    Unable to Delete eMail Messages
    http://support.apple.com/kb/TS2475
    How to Delete Email on the iPad
    http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
    How to Mass Delete Emails from iPhone and iPad Inbox (with video)
    http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
    How to delete ALL mail messages from iPhone/iPad in one step
    http://www.conferencesthatwork.com/index.php/technology/2014/01/how-to-delete-al l-mail-messages-from-iphoneipad-in-one-step/
    How to Attach Photos and Videos to Emails on an iPhone or  iPad
    http://www.wikihow.com/Attach-Photos-and-Videos-to-Emails-on-an-iPhone-or-iPad
    iPad Basics: Sending an Email With An Attachment
    http://ipadacademy.com/2012/03/ipad-basics-sending-an-email-with-an-attachment
    How to add, send and open iPad email attachments
    http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
    How to Send Multiple email Attachments from your iPad or iPhone
    http://ipadacademy.com/2014/03/how-to-send-multiple-email-attachments-from-your- ipad-or-iphone
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    Importing a Contact List CSV to the iPad
    http://techchannel.radioshack.com/importing-contact-list-csv-ipad-2235.html
    iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iCloud: Create a group and add contacts to it
    http://support.apple.com/kb/PH2667
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email! Mail Client with Attachments and Cloud Services
    https://itunes.apple.com/app/group-email!-mail-client-attachments/id380690305?mt =8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
    How to delete an email account on your iPad
    http://www.shoppepro.com/support/knowledgebase/228/How-to-delete-an-email-accoun t-on-your-iPad.html
     Cheers, Tom

  • Have ipad Mini and the connection to server failed.  How do I reconnect?

    Have a iPad Mini.  connection to the server failed.  How do I reconnect to server?

    You need to be more specific about which server. Internet server, Mail server, AppStore/iTunes Store server?
    What are you trying to do?
     Cheers, Tom

  • My iPad won't connect to a server for mail only.  This happened after my update to 7.02 update to 7.02

    MY iPad mini cannot connect to the server for Yahoo! email. I am able to access internet and Facebook.  This connection error came after an upgrade to 7.02. Has anyone else had this issue? Have you been able to resolve it? I have checked all my account info, deleted and re-entered my account, rebooted my iPad. Nothing has helped.

    Is your iPad jailbroken?

  • HT5622 Many times I find when I open mail box icon on my IPad it says connection to the server failed , what should do?

    Many times I find when I open mail box icon on my IPad it says connection to the server failed , what should do?

    Hi Vidyasagar,
    Thanks for visiting Apple Support Communities.
    If you are seeing an error message when checking email on your iPad, the troubleshooting steps in this article can help:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Best Regards,
    Jeremy

  • Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2

    Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2
    1. Client Os : Windows 7 Pro
    2. Server OS : Windows Server 2012R2 with RDS broker and RDS Gateway server with 3.part Certificate  with friendly name sky.mti-itservice.no activated.
    The  main problem is following: The RDP logon session never ends
    Any ideas ?
    Regards
    Kenneth Knudsen
    Email : [email protected]
    mvh Kenneth Knudsen MCSE 2003 HP ASE

    Hi Kenneth,
    Here for your case suggest you to configure RDP session time limit so that your user can disconnect\log off once the specific time limit reached.
    You can setup the session time limit in different method.
    1. Open the Server Manager, select Remote Desktop Services.
    2. In Remote desktop Services, in right side you can drop down to collections.
    3. Select the collection which you want to edit the settings.
    4. Under collections Properties, select Task and then Edit Properties.
    5. In Properties dialog box, select Session.
    6. You can find all thetimeout settings under session collection properties; edit according to your requirements and then OK. 
    And apart also by group policy setting as below.
    Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits 
    User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits 
    -  Set time limit for disconnected sessions
    -  Set time limit for active but idle Remote Desktop Services sessions
    -  Set time limit for active Remote Desktop Services sessions
    -  End session when time limits are reached
    Please check which setting suitable for your environment and you can apply for your case.
    [Forum FAQ] Restrict number of Active Sessions in RDS 2012 and 2012 R2
    https://social.technet.microsoft.com/Forums/en-US/00c2252b-8ec0-489f-8da2-07a434a9b5a2/forum-faq-restrict-number-of-active-sessions-in-rds-2012-and-2012-r2?forum=winserverTS
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Remote Desktop Connection Client 9.3.9600 unable to connect to Server 2012 RDS via Gateway

    Hi,
    I have a Windows Sever 2012 R2 RDS environment with two Gateways servers configured in high availability mode (RD Web Access, RD Gateway, RD Connection Broker roles installed) and four Windows Server 2012 R2 RDS Session Hosts. The servers are all running
    the most recent public server updates. With this configuration I when connecting externally using a Windows 7 computer with the older Remote Desktop Connection client (6.1.7601) I am able to connect without any problems however when I try connecting with a
    newer client from a computer running Windows 8.1 and the 9.3.9600 client I am unable to connect. 
    At the moment a NAT rule is configured to pass 80/443 traffic to only one of the RDS gateway servers, I've removed our load balancer from the configuration for the moment to reduce the complexity. 
    No error is generated by the client when it tries to connect it just stops trying to connect after a while.
    On the Gateways servers event logs for 
    Things I have looked into so far.
    - I've double and triple checked the RDS configuration and checked it against one of my other clients configurations that is working and they are identical. 
    - Connecting from an older client version works fine.
    I'm not sure what else can be checked does anyone have any ideas?

    Hi,
    1. What entries are you seeing in the RD Gateway's log?  Event Viewer\ Applications and Services Logs\ Microsoft\ Windows\ TerminalServices-Gateway
    2. How come you are not forwarding UDP port 3391 in addition to TCP port 443?  It should work without UDP, but you will not have UDP support which is one of the benefits of RDP 8.0/8.1.
    3. Are there any non-default group policy settings being applied to the servers and/or client PCs?  To be clear, I'm asking if any changes have been made to the default local and domain security policies, group policy objects, new GPOs that may have
    been added, etc., that are applicable to the servers and or client PCs.
    -TP

  • Error while connecting oracle11g to sql server through transparent gateway

    Hello
    i'm facing this errors when i try to connect oracle 11g to sql server through transparent gateway:
    http://www.freeimagehosting.net/newuploads/d4454.jpg
    the directory for my db is : C:\oracle\product\11.1.0\db1
    and for the gateway: C:\oracle\product\11.1.0\dg4msql
    the configurations i used:
    gateway :
    tnsnames.ora:
    dg4msql =
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=Kinda-PC)(PORT=1522))
    (CONNECT_DATA=(SID=dg4msql))
    (HS=OK)
    listener.ora:
    GATELIST =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = Kinda-PC)(PORT = 1522))
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (PROGRAM = dg4msql)
    (SID_NAME = dg4msql)
    (ORACLE_HOME = C:\oracle\product\11.1.0\dg4msql)
    and for the oracle database :
    listener.ora
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = Kinda-PC)(PORT = 1521))
    tnsnames.ora:
    DB1 =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = Kinda-PC)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = db1)
    gateway =
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=Kinda-PC)(PORT=1522))
    (CONNECT_DATA=(SID=dg4msql)
    (HS=OK)
    thanks :)
    Edited by: 903043 on Dec 18, 2011 6:18 AM

    Did you go through the various steps in the doc?
    There is a gateway specific forum below;
    Heterogeneous Connectivity
    Cheers
    David

  • Windows Server 2012 RDS CALS on Windows Server 2008 R2 Licensing Server

    Hi,
    at the moment we are installing the first couple of Windows Server 2012 in our infrastructure.
    Some of them have installed RDS.
    Now we are wondering whether it is possible to use our existing Windows Server 2008 R2 licensing server for serving the licenses we have (yes we to have new Windows Server 2012 RDS CALS) or whether we have to install a new host based on Windows Server 2012.
    We tried to add the new license to the 2008 R2 licensing server, but it is not possible. The licensing manager's error message: "The license code contains invalid characters or not enough characters."
    Is there any other way?
    Thanks and regards
    Matthias

    Hi matt_will_fix_it,
    How about Windows 2012 R2 ?
    Will a Windows 2012 RD Licensing server provide licences to a Windows 2012 R2 server?
    I have not tested it, but it should work.  Server 2012 R2 requires the same RDS CAL version as Server 2012.  If you try it and have an issue please reply back.
    -TP

  • Setting up a Mac OS 10.6 Server as a gateway

    I am completely new to servers, however I am the only one at my office who can do anything with computers, not so much because I'm so good, but everyone else is bad. Well, we decided to set-up a server. We currently have 3 Windows desktops and one Mac laptop as clients. I want to put the server as the gateway. We have a static IP address from Comcast. I want the set-up to be:
    Internet->Comcast Business IP Gateway (Modem)->Mac OS 10.6 Server (Gateway with Static IP)->router->Clients
    I tried to set it up last night using the Gateway Set-up Assistant, but after I did it, even the Server couldn't connect to the internet. I don't know if it changes this set-up, but after I set this up, I want to have the Mac server running as a File, Print, Web Hosting, and VPN Server.
    Can anyone help?

    If I may suggest a simpler answer for you, go get an Apple Airport Extreme and then use the 10.6 server to manage your firewall and VPN access to your internal network. It works way more easily than using the server as your gateway, IMHO.
    I've done this with my own setup and am much happier.

  • Server 2012R2- RDS Farm Certificate Miss-Match on Session Hosts

    Hi Guys,
    I've another RDS2012R2 issue. Internal and external domains do not match. External: domain.com.au; Internal: domain.com.net.
    I'm getting certificate miss-match errors when connecting to the Farm/RemoteApps.
    I have performed the follow fixes:
    Change published FQDN for Server 2012 or 2012 R2 RDS Deployment (http://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80). This resolved the original issue where I was getting a certificate miss-match error externally
    for the FQDN of the server.
    Updated the RDP-Tcp certificate used on the Session Host Servers. This was to resolve an issue where using mstsc to RDP to the farm externally(via gateway) would give a Certificate is not trusted error on the RDSH side.
    Now whenever RDWeb is used to launch a RemoteApp or the farm, I get a certificate miss match error as the RDSH server is called RDS1-TCC.domain.com.net and the certificate is for remote.domain.com.au.
    I rolled back the last change so that RemoteApps and the Farm would work successfully internally without certificate issues. How do I go about resolving the certificate errors?
    For extra background details see my orignal thread, It was marked as answered when only 1 out of 2 issues was resolved. http://social.technet.microsoft.com/Forums/windowsserver/en-US/b664ddaf-6c11-49e2-8a69-0df3b8ef13a1/server-2012r2-rds-farm-with-xp-and-windows-vista-clients?forum=winserverTS
    Cheers,
    Ben

    Hi Ben,
    Thank you for posting in Windows Server Forum.
    In your case, I can suggest you to check that the certificate must match the FQDN of the server. If you are creating SSL certificate then it must be signed by trusted authority and also the certificate must be stored under “local computer/personal store“.
    Also you can buy the certificate from 3rd party which is wild card certificate and only 1 certificate can be used for your network. Please check below links for more information regarding certificate issue.
    1. Certificate Requirements for Windows 2008 R2 and Windows 2012 Remote Desktop Services
    2. Configuring RDS 2012 Certificates and SSO
    3. Windows 2012 RDS Certificate mismatch
    Hope it helps!
    Thanks,
    Dharmesh

  • Can we use Windows Server 2012 RDS CAL license in RDS 2008 R2 Server

    Respected Sir,
    We have RDS Server 2012 CAL license select plus  but we want to use Windows Server 2008 R2 RDS so is it possible to use 2012 RDS license in RDS 2008 Server?
    if yes how can put this.
    Waiting for your reply.
    thanks,
    Hiren Patel
    +91 9974091230

    Hi,
    RDS 2012 CALs can license 2008 R2 and 2008 session hosts. However, RDS 2012 CALs only can be installed on the 2012 Licensing server.
    RDS and TS CAL Interoperability Matrix
    http://social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • How to find the Values of SAP Gateway Server Host  and Gateway Service Valu

    Hi All,
    I installed SAPR/3 4.7 EE on Windows. For configuring SLD and LDAP i am unable to give the SAP Gateway Server Host and Gateway Service values.
    Can any one plz suggest me how to find these values.
    Regds
    Phanikumar

    Hello, SAP Gateway Server Host and Gateway Service are used to set up rfc connectivity, that is the host name and the system number where your sld and ldap is responding, if you have no sld and no ldap , just simply uncheck that options while installing.
    Have a nice week end, Luciano.

  • Server 2012 RDS - User Profile Disks

    Hello,
    I'm implementing Server 2012 RDS session-based.
    Can I increase the limit of User Profile Disk after it is initially set?
    Is it ok that my Admin user has a User Profile Disk i.e. no local profile on the server as they did previously.
    Are PSTs supported on User Profile Disks - previously PSTs were unsupported on network share - User Profile Disks are on network share.
    I had an issue where a UPD was created for a user - I then delete the UPD. I then logged in as the user (a domain admin) and expected a local profile to be created - this didn't happen. A temporary profile was created instead. This was unexpected.

    Hi Gary,
    You can try to change the size of User Profile Disk by mounting .Vhdx file. Please refer below thread for information.
    Resize User Profile Disks
    As per my research, i can suggest you to use admin local user profile on server.You can get more information for UPD on below listed article.
    1.  Easier User Data Management with User Profile Disks in Windows Server 2012
    2.  Using User Profile Disks (UPD) in combination with predefining the Modern UI Start Screen on RDS 2012 (appsfolder.itemdata-ms)
    Hope it helps!
    Thanks,
    Dharmesh

  • Server 2012 RDS - User Profile Disks - Errors during Logoff

    I have set up a test Server 2012 RDS collection (Single Server for now) and implemented User Profile disks.
    I have two problems.
    First: My generic test user can connect and does successfully use the user profile disk as expected. However, at
    logoff, the system event log contains these errors:
    The error (NTFS 137) is: The default transaction resource manager on volume C:\Users\ts3.test encountered a non-retryable error and could not start.  The data contains the error code.
    The warning (NTFS 50) that concerns me is:
    It appears that the user profile disk is being "disabled" or "disconnected"
    before the profile data is completely written at logoff. What can I do to troubleshoot this?
    Second:
    Update: A post from Mike Connor on the following page: -LINK- solved
    the problem described below. 
    My administrative user always logs on now with a temporary profile. At the beginning, the UPD was working and mounting. That stopped working. In attempting to troubleshoot, I logged the admin user off and deleted the UPD disk
    file from the share. I remember it working again after generating a new UPD disk file in the share. Soon, it quit working again. I deleted the UPD disk file again from the share and ever since, it has never regenerated a new UPD and
    always logs on with a temporary profile.

    We experience less to zero problems after an outage with our User Profile Disks when we use the option: "Store all user settings and data on the user profile disk". Other then when we use the other checkbox (even though all checkboxes
    underneath are checked). 
    Our test setup was, an RDSH 2012 r2 server(s), with an 2012r2 server holding the share.
    We first tried the "store all user settings" for the User Profile Disk, we logged several accounts onto our RDSH Server we then disconnected our server which holds the share to simulate an outage. After about 5 minutes we connected the
    server again holding the share. When the share comes back online, we logged off the users and logged them back in. The result was a valid profile for all the accounts including their last changes from before the share got disconnected.
    The exact same test was done with the option: "Store only the following folders on the user profile disk" with all checkboxes underneath checked, which gave us corrupt profiles.. We also did these tests by giving the server holding the share a reboot instead
    of an disconnect from network. This gave us the same result. Each test was done at least 2 to 3 times..
    I hope others can confirm this as well in their situation, as it seems to be a bug within that specific checkbox.
    Looking at the above tests, the best way in my test cases were to exclude the default folders (f.e.: \Documents) if you would like to redirect them instead of using them inside your User Profile Disk. Redirects can be done through GPO Folder redirection
    options or GPO registry combined with Environment Variables.
    Even after several attemps to simulate an outage, i get left with consistent profiles. I've now also included an hard reset of my virtual machine (that gave the same results as a disconnect of the network card). This was all done through using the: "Store
    all user settings in the user profile disk". The other option left us with inconsistent profiles. I hope others can confirm this as well..
    Looks to me that the type of connection towards the User profile happens different. You can see this when looking at the C:\users\<username> and subfolders if you use user profile disks. The 2 options show different symbols as well.

Maybe you are looking for