Ipad restore problem
I have hooked my ipad up to two different computers now and it will not let me fully restore it. It goes all the way through the download process then says processing file. Then it will say it lost network connection and to try again. Any ideas?
If you got the message at two different houses, I would be less inclined to think that it was the security software issue. If the iPad isn't usable at all now, your next step may be to try restoring the iPad using recovery mode.
Am I correct ...the iPad is not usable now? Have you seen this?
Unable to update or restore ....Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
These are the steps for recovery mode.
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.
Similar Messages
-
Ipad restore problem error 102
Hi All,
I've diligently backed up our iPad and used TM to archive the backups.
Unfortunately now, when I need to restore from a backup I am getting the following error from AppleMobileBackup:
ERROR: Restore message response: 102 mkdir error: No such file or directory (2) at path "/var/mobile/Library/SafeHarbor/com.omnigroup.OmniGraffle/Container/Documents/S ite Wireframe & Mockup.graffle/QuickLook" (MBErrorDomain/102)
From reading that it looks like it is having trouble creating a directory on the iPad for some reason. I guess something wasn't getting saved correctly in the backup and thus can't get restored properly or this iPad directory was in a strange state when it was backed up.
I've searched the Web and there are some similar problems to this with different details (e.g. can't rename file) for the 102 error but no real solution.
I've tried a number of my backups going back a number of months and they all seem to have this error. I guess something on the iPad got messed up a while back and all the backups since then have it included, unfortunatley.
I'm wondering if anyone has a solution that can help me complete this restore?
I'm really not worried about Omnigraffle, I would happily reinstall it, but don't want to lose the rest of the backup.
I wonder if there is a way to make the backup continue / complete ignoring this error?
Or perhaps to remove everything with regards to Omnigraffle from the backup?
Thanks for any suggestions.
Cheers,
Ashley.
PS Not really happy when I have backed up all these times and now it is not working. I think Apple's restore software seems a bit too fragile and should work around issues like this to do the best it can.
This is for an iPad 1 with iOS5.1.1 restoring from latest iTunes on Mac OS X Server 10.6.8 Snow Leopard.Hi BKN,
Thanks for your post and sorry to hear you are in the same situation (but it's good not to be alone ;-)
Some notes on your comments (can't seem to easily split quoted messages here):
1. I don't seem to get the "Unexpected connection closure..." error from iTunes that you get (not sure that is significant though)
2. With regards to the special character(s) in the filename. I have hex edited the manifest.mbdb and changed my "&" to a "A" in the filename and the problem still existed (with an "A" in the error path), so I hope we can rule that out.
3. I have not really used Omnigraffle iCloud syncing, just turned on iCloud at the end of the change-over period and haven't used it for file sync-ing (at least not that I know of), so perhaps can rule that out.
4. I have Dropbox running on Mac and client is on iPad (and iPhones). I don't think my Omnigraffle docs have come anywhere near Dropbox though, again not use Omnigraffle on iPad for a while. Have used on Mac quite a bit though.
5. I am still running Lion on my MacBook Pro and the machine doing the iTunes syncing is a Mac mini running Snow Leopard Server, so I think we can rule out iCloud issues, again since I haven't really gotten into iCloud yet.
I have done a lot of investigating and experimenting (with no luck unfortunately). I have used iBackupRobot (free version that works well, click cancel past the registration dialogs to get full functionality I believe) and Hex Fiend as mentioned above.
I also tried another one (called iBackupRestore or something like that but it required mono and X, which I had, but ran very slowly and failed - I think it only works for iOS4 or less). So, don't try that.
With iBackupRobot I extracted my problematic document and associated files. It gave me:
Documents_Site Wireframe & Mockup.graffle
Documents_Site Wireframe & Mockup.graffle_data.plist
Documents_Site Wireframe & Mockup.graffle_data.plist.info
Documents_Site Wireframe & Mockup.graffle_QuickLook_Preview.pdf
Documents_Site Wireframe & Mockup.graffle_QuickLook_Preview.pdf.info
Documents_Site Wireframe & Mockup.graffle.info
_ is for /
The .info files just contain details of the mapping from real filename to the hex filenames inside the backup (useful to find the files and remove them as I did, see below).
I noticed that the data.plist file seemed to be empty so I filled it with content from another data.plist file in Omnigraffle's documents. Interestingly, the error message changed a bit then (IIRC) to this:
20/10/12 10:47:40 PM
[0x0-0x37b37b].com.apple.iTunes[4493]
2012-10-20 22:47:40.605 AppleMobileBackup[30109:903] ERROR: Restore message response: 102 mkdir error: No such file or directory (2) at path "/var/mobile/Applications/8AF90D98-FB52-4E3E-877F-FD0A0F45C0A1/Documents/Site Wireframe & Mockup.graffle/QuickLook" (MBErrorDomain/102)
Note the path no longer includes SafeHarbor (which I believe is the temporary storage area whilst apps are being loaded etc). So some progress but a very similar error.
I have tried removing the hex-name files from the backup but MobileBackup detects them and says the backup is corrupt and will not proceed. The problem is I can't see how we can edit the manifest.mbdb (apart from simple hex editing).
I've tried editing the plist files Manifest.plist and info.plist file (with Property List editor) but again no luck, deleting items (Omnigraffle application entries) is detected as a corrupt backup and MobileBackup will not proceed.
It is interesting how it is the QuickLook folder that is listed in the error. Mine contains a Preview.pdf file which seems to be fine.
I'm also not sure what the error message actually means. I guess it mean that when trying to create the QuickLook directory the path up to there didn't exist (e.g. the "Site Wireframe & Mockup.graffle" directory or one of its parents didn't exist).
I could be wrong though.
I visited an Apple Store and tried to talk to a Genius but didn't get much help from the iPad Genius (should have registered for a Mac Genius apparently), he admitted he wasn't a Mac or iPad Genius (good on him) and went out back to ask his guru colleague.
He came back and said his colleague thought the real error was the -1, which he said indicated a hardware fault.
I don't think they knew what they were talking about, on some Apple support pages it does refer to -1 being something about hardware / comms fault, but I also think it is just a catch-all error code for iTunes when it doesn't know what else to report.
He suggested trying on another iPad but I don't have one and he wouldn't let me use one of theirs. I guess I could buy one and return it after testing for a refund, but I doubt it is a hardware problem myself.
I was hoping they may have some secret way to force the restore to continue or to selectively ignore certain applications on restoring (which may come to iTunes one day I hope). It seems the Apple stores don't specialise in this kind of suppor though.
He suggested ringing Apple phone support / Applecare but I wasn't too keen on trying to explain this and share details over the phone. I might give it a go, even though you had no success because I might luck out on someone who knows more etc.
I think I have done a full reset, sync'ed all apps and then tried the restore - fail.
I have tried so many things I am now having trouble remembering what I tried and how each failed.
My restore seems to go pretty well for quite a while before it fails, so I think it is restoring it's just getting an error when doing this one document for Omnigraffle and can't get past that.
If we could stop it restoring Omnigraffle I think we would be good to go but, as mentioned above, I can't see how we could do that without some serious editing of the backup, especially the plists and manifest.mbdb, but I am not expert ont hose.
Very sad to hear that Apple had no ways to work around a file or error. I think it is a fault in their restore software - it is too fragile, not catching the said error and fixing the directory path. But I am not holding my breathe for them to assist (but will try to get help).
Thanks for your notes and please keep me informed of how you go / if I can help in anyway.
Unfortunately, I am very busy at work these days and can only work on this on the weekends.
Cheers,
Ashley. -
HT201263 Ipad restore Problem ?
My Friends ipad has never been connected to or registered to a computer and they put a password and forgot it and it asked them to connect it to itunes.They came to me (because their computer is broken) and asked me to restore it ( i already have itunes on )
i tried to connect it but it had a passcode, i searched the internet to be able to put it in recovery mode mode and i did it.
however when i try to restore it it takes a while to get the ipad ios update and when it finishes it just stops and does nothing and the only thing that i can press on is the restore button again, and again i tried but it didnt work what should i do ? and when i tried to turn it on ( from the lock button ) it didnt work. what should i do ?iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers, Tom -
iPad 2 problem. After updating to IOS 8.0.2 iPad says that I need to plug into iTunes. When I do that, the only option is to restore iPad to factory settings? iPad will do nothing until then. I have never had this problem before. Help
Hi ..
Follow Apple's instructions for recovery mode here > iOS: Unable to update or restore
You can restore from a backup. -
iPad sync problem - HELP! I keep getting this message "...cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional ...space needed)" and yet I seem to have plenty of space on the iPad. This just started today. I even tried deleting some things to make even more room, but it didn't help. Any ideas???
I was thinking of restoring, but I've never done it... should I?
thank you!Hello florafromnv,
Welcome to Apple Support Communities.
The following article addresses how to resolve the issues related to this message:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/TS1503
Regards,
Jeff D. -
My ipad restored to someone elses account. how do i fix?
My ipad restored to someone else's account. I also noticed when connected to itunes my serial number does not show. How do i fix?
I used my laptop. It has all my itunes and idevice info on it. I even have a stored backup in itunes from a previous time. After talking to the friend that created this problem I found out that he was trying to unlock an ipad he purchased but was disabled or locked. He used WinScp to try and recover info off that ipad, That did not work so his sorry @#$ hooks my ipad up to WinScp and did something to where when I, [later on] discovered none of my apps would open. I hooked my ipad up to the laptop that only my ipad is authorized on and tried to restore it and that's when it happened. After the restore my ipad showed an activation screen to someone other than me. Itunes doesn't show my serial number at restore screen. I tried diagnostic scan and it reads it but i cant get itunes to restore my info and apps.
-
My ipad has problem, it gyroscope is not functioning
my ipad has problem, gyroscope is not functioning from yesterday and i did not used.
Are you seeing any error messages?
This Apple doc might help ya out -> iOS: Troubleshooting carrier activation issues
If you have a backup in iTunes, you can recover your data by restoring from backup. -
IPad Retina Problem: Wireless Internet Connection Stops Working All The Time
the wireless would all the sudden stop working. What happen is, I'd be going from one page to another and then BOOM. No more loading, the little circular "loading" icon never ending.
Also happens with iTunes trailers app, in general all the wifi.
What i've already tried:
Performing a full ipad restoration (as new restoration). I dont have issues with my ipod touch 5 or my galaxy sIII or my pc's, so i assume the ipad retina is faulty?Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Anyone have an Answer for the ipad Hotspot problem in Australia
Anyone have an Answer for the ipad Hotspot problem in Australia
Sorry but we can't really help you unless we know your problem. Enjoy your new iPad
-
hi, i just bought an ipad.my problems is the privious owner dont reset the apple id.i just reset the ipad.now i cant active the ipad with my apple id.what can i do?
You will have to contact the previous owner and ask him/her to remove the iPad from their account, he/she is the only person that can do it : Find My iPhone Activation Lock: Removing a device from a previous owner’s account - you won't be able to use the iPad until they do so.
-
iPad wifi problems with IOS6
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Puchased items in my watchtime app will not restore to my ipad (1) after an ipad restore. The items appear ready for purchase. how can i restore the items.
Following ultimately helped me : Make sure that you are logged in at the App Store App or iTunes App with your apple ID and password with a US account. Turn your iPad off and on and than you should see the Radio button again. It won't work if you are logged on with a foreign account. If you are not logged in at all, it worked, too.
-
what are the steps in Apple Configurator iPad restore? It appears to me that Configurator repeats steps, but it probably is that I don't know what happens and when.
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can get a clue to what it is, and potentially use it, by going to https://appleid.apple.com/ and clicking 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
If you don't have, or don't want to use, your rescue email address (you won't be able to add/change it until you can answer 2 of your questions) then you will need to contact iTunes Support or Apple to get them reset (which will be by phone as they need to verify your id - we are fellow users here on these forums).
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset you can then use the steps half-way down this page to add/change rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or you could change to 2-step verification : http://support.apple.com/kb/HT5570 -
Was loading latest iPad update and it hung. Itunes indicated the iPad needed to be restored. Clicked on restore and received error 2003.
Same thing here. I have an iPad 2 that was running iOS 5.0.1. Everything worked fine when without any kind of sync over cable or wifi, all apps including free and purchased ones disappeared. When I did connect it to iTunes, all apps were unchecked. So, I checked my apps, did a sync, and they all returned but missing all app data.
Long story short, things got a little flakey and I wanted to start from scratch so I plugged my iPad in to install the factory default firmware but I get the following error, " The iPad "iPad" could not be restored. An unknown error occurred (26)." Tried this in DFU mode and in regular restore mode (when the iPad screen says to connect to iTunes). I tried different versions of iTunes and machines, OS 10.6, 10.7, and Windows 7, all giving the same error. When attempting a restore, it goes through "Extracting software, Verifying iPad restore with apple, preparing iPad for restore, waiting for iPad, preparing iPad for restore, verifying iPad restore." After the progress bar on the iPad is there for about 30 seconds, ERROR. I tried different things for hours with iOS 5.0.1, and I also get the same error with iOS 5.1, which was released today. -
I had my ipad restored today and cant locate a book I purchased in IBooks. is there a way to locate this book ithout purchasing it again
As long as the book is still in the store, and you haven't changed countries since buying it, then it should show in the Purchased tab in the iBooks app on your iPad for redownloading. If it's still in the store but doesn't show in Purchased then check to see if it's hidden : iTunes Store: Hiding and unhiding purchases.
Maybe you are looking for
-
Blank Layout in Web dynpro ABAP
Hi Experts, We have configured Web dynpro ABAP in our server and activated all relevant services in SICF. But, we face a problem where layout is invisible and the ouput is appearing when we test the application. Please provide a solution as the layou
-
Folders displaying in Photoshop organiser
I have just started using Photoshop and have uploaded all my photos from my computer's hard-drive, and am displaying them using the 'Folders' view in Organiser. Unfortunately, all the photos are being displayed twice - once within 'Pictures' and onc
-
i am looking for pics hosted on the old .mac site are they gone forever?
-
How can I search the forum?!!!
1. Cannot see a search box on the support forum. 2. Do I need an download manager for Firefox? I use Mac OS X
-
Can I combine/merge 4 itunes accounts into 1?
.