IPad running hot since update

Since updating my ipad3 it's running warm to hot to the touch it never did this before. I used to be able to close programs running but with the update I can't see how to do it.

I don't have a problem with heat. However, to close programs, you double click the home button just like before. The difference is that instead of just showing you the app icon at the bottom of the screen, you'll now get the app icon and a screen shot of the app as well. Grab the screen shot and slide it toward the top of the iPad and you'll see it fly off the screen. Once it flys off the screen, you just closed that program...You can continue to do this for all of the apps that you have open.

Similar Messages

Why does my ipad run slow since update

Since updating the software, my ipad runs slow, particularly games and web

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

IPad running slow since update

My iPad is running very slow since the latest update can anyone help?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
More Tips here...
http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/

Ipad mini retina since update to ios8.2 cannont update or install any appscircle just keeps spinning round also updated today to ios8.1 still not sorted problem out done hard reset several times no joy any body else got same issue

ipad mini cant update any apps or install new ones since updated to ios8.02 and now today updated to ios8.1 still cant update apps the circle just keeps spinning round, i have done a hard reset etc no joy, anybody else got same problem.

VPN-User,
Ok - I see the list of issues and will ensure our X300 specialist takes a look at it.
Please do understand that while you have put together a very coherent list, I try to ensure priority to threads in which multiple customers are focused on a single issue, as we deliver the most benefit to the community in working on those. This forum is primarly a peer to peer discussion forum rather than a Lenovo chat / tech support where we try to solve each and every issue put forth.
Individuals with a long list of issues on a particular machine may find benefit from either contacting technical support and working through their list, or publishing it as you have done and wait for other users of the same system to share their experiences.
Thanks for your patience
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

IPad running hot

The IPad 2 does not run hot, now that I have iPad 3 it runs hot all the time! I have turned off the auto brightness, but this not help. What is the best solution?

Turn the brightness down. Turning off auto brightness won't do much if anything.

Photos makes MBP run really hot since update 10.10.3 (14D131)

Hi
I updated to 10.10.3 (14D131) and each time I access the new Photos app my MBP now gets really hot, the fan runs constantly until the program is closed.
Any clues how to stop this or is it a wait for the next update to solve this?
Thanks

Thanks for the attention mate.
It's clearly related to the update. And checking the support article +*About the Mac OS X 10.5.6 Update*+ http://support.apple.com/kb/HT3194 , it says there:
AirPort
+Improves the reliability of AirPort connections, including improvements when roaming in large wireless networks with an Intel-based Mac.+
_Time Machine_
+Fixes issues that could cause Time Machine to state the backup volume could not be found.+
+Improves Time Machine reliability with Time Capsule.+
So the two things I have were supposedly fixed by Apple. I'm still waiting for a solution before I go back to my backed up state.

Why is my iPad running slow since upgrading to 5.0.1?

Since my iPad was upgraded to 5.0.1 it seems to run slower and now it's been crashing out of applications frequently. Any ideas? I reboot it all the time to get it to run at a decent speed.

I didn't suffer anything like that with mine, but have hear about people who had the same after restoring from backup. Some said that restore the iPad from scratch (not from a previous backup) solved the problem.

My iPad keeps rebooting since update...

My iPad 2 keeps rebooting since the new iOS 7.0.2 update, anyone else having the same issue? What can I do to fix it that won't involve me hooking it up to computer, as mine has kicked the bucket. It's brand new in bought it this summer, it still has over 76GB Of free space.

Try a reset .
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

Ipad running hot after 8.3 upgrade

I just upgraded my iPad to 8.3. In the couple of hours since, it is uncomfortably warm to the touch. I've stopped all running apps and forced a shut down while I let it cool off. Is this a known issue with this upgrade?

What you need to do is what many others have done, and that is to reset your iPad to factory default condition by using your iTunes program. And ... don't forget your backups.
Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)
https://support.apple.com/kb/HT5262
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
iOS: Troubleshooting Encrypted Backups
http://support.apple.com/kb/TS5162
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414

AirPrint from iPad not working since update to iOS 6.1

I am unable to print from my iPad3 since I updated to iOS 6.1 last weekend. I have the Lantronix xPrintServer Home Edition which had been allowing me to print to my networked Brother HL-5250DN as if it were an AirPrint printer. Now, I get the message, "No AirPrint Printers Found" when I try to select a printer in the Printer Options menu. Is there a way to roll-back this update???

It's probably best to contact Lantronix. From the AirPrint Basics page:
"You also need an AirPrint-enabled printer listed in this article. Printers not listed in this article are not supported by AirPrint."
The xPrintServer is not listed on the AirPrint Basics page.

Old FP-1000 app developed with LabVIEW 5.1.1, not running correctly since updating to MAX 4.5/FP6.0.2

I have an old application built under LabVIEW 5.1.1 which opens an .iak file (the file path is embedded in the app) and reads/writes to modules attached to an FP-1000. Recently I was forced to move the setup onto a new PC and now I'm unable to get the app to communicate with the FP hardware. The new PC has recent drivers installed (MAX 4.5, FP drivers 6.0.2). From MAX, I can open the .iak file and communicate with the FP hardware, so I'm unsure of where the problem lies. Are there version limitations with such old LabVIEW code and new FieldPoint drivers? Sorry, I haven't visited this setup for a long time (nor did I create it originally), so I'm a bit rusty on FieldPoint setups. Any guidance would be much appreciated - I'm trying to avoid having to redevelop the app.
Thanks,
Dave
David Boyd
Sr. Test Engineer
Philips Respironics
Certified LabVIEW Developer

Thanks, Chris, for replying.
I have every version of LabVIEW from 5.0 through 2009 beta available, though not presently installed. I was trying to avoid having to bring this app back into the development environment.
Since I posted last, I experimented and fixed the issue. I took a current copy of FPLVMgr.dll (version 6.0.0) and dropped it into the support directory for the app, replacing the old (3.0.0) DLL which was there. So, the answer to my question seems to be, an old LV executable can use a new FP DLL, and apparently must do so if the MAX/FP driver installation is updated.
Hope this info is useful to others.
Dave
David Boyd
Sr. Test Engineer
Philips Respironics
Certified LabVIEW Developer

IPad mini unresponsive since update

JJust downloaded newest iOS update. No problem with iPad 4, iPod, or iPad mini wifi. But iPad mini with wifi & cellular is completely stuck in visual of connector moving to iTunes. Can't restart. Completely unusable. I am submitting on other mini.

Hello fulkerstone,
Welcome to the Apple Support Communities!
I understand that after updating your iPad mini, all you see on the display of the iPad is the Connect to iTunes graphic. In this situation, I would recommend using recovery mode to restore the iPad mini. Please use the attached article for more information about this process.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Cheers,
Joe

Imessages and facetime not working on ipad 3 mini since update to 8.3

brand new ipad 3 mini i-messages and facetime was working until update to IOS 8.3. can anyone help. I've restored ipad and set up as new but still same.

If none of this suggestions help, you are in the same boat a bunch of us are in! We all have newish devices (mostly iPad mini 3) and suddenly can't get into FaceTime or Messages. There's no slider and the sign in just dumps us back to sign in or gives a network error message.
If that's what's happening, it's probably an AppleID problem. Mine isn't working for FaceTime or Messages on any iPad, but my friend's works on mine. If you go to page 18, you will see what we've tried after 8.2 upgrade
imessage and Facetime sign in activation error iPad ios8.1.2

Remote Desktop Protocol v8.08 on IOS (IPAD) - constant disconnects since update to new version.

I was having major issues with RDP 8.08 update on my IPAD in July 2014. Connect to my remote Windows 7 desktop was successful, however, screen refresh peformance was very slow and disconnects occured often. Was referred to KB2570170 and applied
the regedit change to add DisableLargeSendOffLoad = 1. This however had no real affect. It was suggested that I recycle my IPAD. This did resolve the problem.
Should a recycle be performed more often ?

Hi,
Based on the description, it seems to be a network issue on iPad side. In addition, I think we do not need to recycle iPad more often.
Best Regards.
Jeremy Wu
TechNet Community Support

Why is my iPad working slower since updating with IOS 7

I have recently uploaded the new update for iPad and it is now significantly slower and I liked the old themes better,this latest update has made downloading and surfing really slow anyone else experiencing this or is it just me?

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

IPad running hot since update

Similar Messages

Maybe you are looking for