IPad's camera connector kit to use a USB DAC on iPod?

I understand that the iPad's camera connector kit can be plugged into an iPad to use a USB audio interfaces such as an external DAC. Will this be possible with an iPod 5.5G?

According to previoss reports, it does not work with an older iPod. However, there may be other third party products that offer this functionality for your older iPod.
B-rock

Similar Messages

  • D800 file compatibility:  Has anyone experienced problems with loading D800 files onto the iPad using the camer connector kit?  I have tried both RAW and JPEG using SDHC and CF cards and the iPad(3) doesnt recognise any of the files.

    Has anyone experienced problems with downloading Nikon D800 files to the iPad3 using the camer connector kit?  I have tried .RAW and JPEG (of various sizes) on both SD and CF cards, but the iPad doesn't recognise the files. 
    I have seen various forums discussing Lightroom and PSE updates that are required to process .NEF files but I can't find anything on the iPad/camera connector issue.
    I dont have any problem if I put the SD card straight into the SD slot in my iMac and Aperture will process the files fine, but I would really like to be able to download and view files on the move on the iPad.
    Any advice appreciated?
    PS - saw something that suggested the iPad had a maximum file size of 16mb for photos, not sure if this is correct, but I have tried smaller JPEG files and they still aren't recognised.

    If your camera supports both PTP and Mass Storage Device modes, it may be necessary to use both modes to import all media content.
    If some files do not import as expected using one mode, try switching to the other mode and importing again.
    Note: Some cameras may refer to PTP as Pictbridge or PTP/Pictbridge.

  • Can i Use The Apple Wired Keyboard With Camera Connector Kit

    Can i Use The Apple Wired Keyboard With Camera Connector Kit
    3g 64gb verizon

    People report it is still possible to use a wired USB keyboard with the CCK, if you use a powered USB hub to get around the "not enough power" error message.  (I have done this with an older Apple USB keyboard my non-jailbroken iPad1 on iOS 4.3.3.)  Normally, powered USB hubs have a AC power adapter so you lose portability unless you can find a battery powered USB hub.  At this point, the (in)convinience of the USB hub becomes an issue, depending on what you get.
    And wired USB keyboard were never supported for the iPad.  So there's no guarantee that it will continue to work with future iPad updates from Apple.  So best to go with a Bluetooth keyboard unless you have a specific USB keyboard that you "must" use.  If you have all the equipment already, I say give it a try.  But I would not recommend trying a USB keyboard if you have to purchase anything.

  • Importing photos to my ipad via the camera connector kit  How do I do this

    I cannot import photos to my ipad via the camera connector kit The photo app does not say import anywhere  How do I do this

    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom

  • Problems with iPad camera connector kit

    I used the camera connector kit yesterday with my sd card and it worked fine. I have tried to use it again today and it comes up with Contents not available, cannot read the connected storage media. Any suggestions as to how to get it to work?

    How are the photos getting onto the card, directly from the camera or are you copying them onto the card from your computer ? If you are copying them onto the card then you need to create a DCIM directory off the root of the card, with the photos underneath it, and the photo filenames need to be exactly 8 characters long (no spaces) plus the file extension i.e. in a similar format as if a camera had created/written them.
    If the card has come straight from the camera then try a reset of the iPad and see if the photos are then recognised : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Can anyone help me move video from Sony HDR-XR550 to ipad 3gs via camera connector kit?

    Can anyone help me move video from a Sony HDR-XR550 to ipad 3g via camera connector kit?

    You can use iPhoto for the import. iLife apps are integrated. From within iMovie you have direct access to iTunes for adding music, and iPhoto for photos and videos in the iPhoto library.
    Or you can use the Image Capture application for the import if you prefer placing such imports into manually created folders and not using iPhoto.

  • IPad 2wifi, and camera connector kit problem

    My iPad camera connector kit is not importing all the photos onto my iPad, with some pics it's, placing an exclamation mark rather than a tick, why is this happening?

    I would suspect there is something going on with the SD card the iPad is not liking. Try to transfer all the photos to a computer which may be better at reading the card. Once you have verified all the photos are safely copied use your camera to format the card. This will wipe it completely and set it up again which can fix any formatting issue the card may have. If you see this issue again I would not trust it and get a new card.

  • HT4101 My iPad is tellin me I can not use the camera connector because it uses too much power..... ***

    My iPad is tellin me I can not use the camera connector because it uses too much power..... ***

    I'm having same problems.   If I connect my blackberry it says it uses too much power.  If I take sd card out of phone and connect that way I get the same message.    The leaflet with the connector says go to Apple.com/support/iPad to find list of compatible cameras..........  I'm still trawling the site to find any such list!    Just need to know if it will work with a blackberry .....  If not I've got to take it back.    Have been advised by a friend to cut my losses get my money back and use Bump to transfer my pics.    I don't own a traditional camera because my phone has a great one.  Really don't want to have to carry a camera about with me!   They don't make it easy do they!   

  • I want to download pictures from a Sony Memory Stick Pro Duo to my iPad 4. There is no cord for the camera and the USB dongle requires too much power through the camera connector kit. Any good solutions?

    I want to download pictures to my iPad 4 from a memory stick pro duo. There are no cord connections for the camera and the USB dongle requires too much power through the camera connection kit. Any good solutions?

    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
     Cheers, Tom

  • After update Ipad 1 to 4.3.3 , camera connection kit cannot use.

    I did up FW. ipad1 to IOS 4.3.3 why the camera connection kit cannot used.
    How do i solve this problem?

    hi there.
    i got my ipad just a month ago. when i connected it to the laptop, itunes asked if i wanted to download and update the ipad software to 4.3.3? mine is 4.3.1 at the moment. shall i upadate it? will there be any problem?
    what is ios? please clarify
    thank you

  • Have an ipad 2 and have bought the camera connection kit to use with my flip ultra. However when try to connect ot says there is not enough power to support accessory. Can anyone help please

    Have an ipad 2 and have bought the camera connection kit to use with my flip ultra. However when try to connect ot says there is not enough power to support accessory. Can anyone help please?

    If you have ios 5.1.1 the output power is 100ma, on the iOS 5.0.1 the power output is 500ma! This may be the cause?

  • Camera connector kit not working at all

    Hi
    I bought the camera connector kit and can't get it to work.
    I don't really use the camera to take photos or shoot videos. I bought the kit mainly to add storage to my brand new iPad (3).
    What I have tried to do so far, is:
    - create a DCIM folder on a USB stick AND on an SD card
    - copy .jpeg and H.264 video encoded files in those folders
    - insert the different connectors in the iPad
    - with the 32gb USB key, I got a message "not enough power"
    - with a 4gb USB key, all I got was " no photo to import"
    - with the SD card, once again, "no photo to import"
    So, basically, nothing works. Am I doing anything wrong or is there something else I could try.
    Thanks

    I bought the kit mainly to add storage to my brand new iPad (3).
    The CCK can only be used to import photos/videos to the iPad. Can't be used to export photos/videos or other files, or use like an external hard drive.
    Are you opening the Photos app when you try to import the photos & are they identified as .jpg?
    Pad2, the new iPad Supported Video Formats & Movie Formats
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
     Cheers, Tom

  • Camera Connector Kit and SONY Digital camera MP4 files

    Using the Camera Connector Kit I am able to copy SONY Digital camera MP4 files. I am unable to play it on the iPad. I have tested this on 4.2 and 4.3GM of iOS.
    With more and more people using iPads this type of functionality should be working.

    I agree. Why not formally suggest it to Apple since Apple really does not read/use posts from this forum.
    http://www.apple.com/feedback/ipad.html

  • Camera connector Kit and iOS 4

    My iPhone 3G running iOS 4 no longer transfers photos to my iPad using the camera connector kit. Any similar or dissimilar experiences with any type of iPhone and the camera connector kit?
    Dan

    The camera connection kit uses Bluetooth drivers. That's why unexpected things like microphones work. I had to turn on Bluetooth for the wired connection to work between my iPhone and my iPad. I learned this on a podcast with Andy Ihnatko.
    Dan

  • Will Apple Camera Connector Kit Import .PDF files?

    Will Apple Camera Connector Kit Import .PDF files? I need to import large (60MB plus) .PDF files created in Powerpoint to my iPad. They are too large to be practical for e-mail.

    Open GoodReader on the iPad. Click on the wifi icon in the menu bar at the bottom of the app. A popup window will open up giving you your local URL. Open Safari on the desktop computer and place that URL in the address bar. A page will open up with directions on how to send a file. The file will be send over the wifi connection to your iPad.
    To add a little... In Safari on the desktop computer. Select file to upload: Choose file--->Navigate to the file on your desktop computer---> Click on the Upload selected file button. There will be a red warning box in the popup window on the iPad. When that disappears the the transfer is complete. If you get a warning can't find page in Safari you don't have the wifi connection in Goodreader turned on. Just click on the wifi icon button in Goodreader to fix. You can bookmark the URl in Safari fir later use. 

Maybe you are looking for

  • This.submitForm fails to download target document

    after some probs with certificate installation (http://www.adobeforums.com/webx/.59b87b22/3) I can now successfully submit form information via this.submitForm in a Linux (Ubuntu) environment. I had a problem where the following was displayed: "Canno

  • Moving an Aperture Library to another disc.

    I currently have my Aperture library on an external hard drive, as well as all the image files. Is it possible to move the Library to my laptop's hard drive, but to leave the image files on the external drive, and not lose any of the adjustments I ha

  • Deleting network connections

    How to I make Mac forget (erase) previous network connections? When I bought my iMac two months ago, I networked it (via ethernet) to my old PC in order to transfer files between both computers.  I set this up using the wizzard that launched automati

  • Changing standart Web page for attaching documents

    Hello. Is there anybody who used BADI RSOD_ITEM_DOC? This BADI is for changing web page in attaching documents in Web Applications.

  • Regarding Standard HR Triggers

    Hi, I am querying my DB and finiding the Triggers with names like HR_ALL_ORGANIZATION_011857_WHO and HR_ORG_INFORMATION_T011853_WHO. I am curious about how and what it signifies. Thanks in Advance