Ipad screen frozen with connect to itunes symbol

I was prompted to to update my ipad and the screen has been frozen despite numerous attempts to restore it to original via itunes.

No, the iTunes icon and the cable mean that it's in recovery mode, you will need to connect it to a computer's iTunes so that you can reset it - you can then restore/resync your content to it

Similar Messages

  • Ipod touch help...screen frozen on connect to itunes symbol

    I tired to connect my ipod to itunes to get the new software update, and the screen just froze on the connect to itunes symbol. i tried to restore it and it says there is an error and it wont let me do anything.
    i have tried to reset the ipod numerous times and nothing seems to help. I am STUCK!!!
    Helps:)
    Message was edited by: musiclover123123

    ok maybe i dont have windows 98 i dont know...
    i had jsut updated my mothers iphone like 5 minutes before and it worked great then i went to do mine and it spazzed!

  • Screen frozen with pic of itune symbol and to plug in adapter, while doing update

    please help. i did new update today and now my screeen is frozen as descibed above....any advice

    you'll want to restore it using itunes and recovery mode
    http://support.apple.com/kb/ht1808

  • TS3681 I restored my iPad and then i clicked "Restore iTunes backup". It is finished but on the iPad screen it says connect to iTunes. I connected it to iTunes but it says the same thing. What should I do?

    I restored my iPad and then i clicked "Restore iTunes backup". It is finished but on the iPad screen it says connect to iTunes. I connected it to iTunes but it says the same thing. What should I do?

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port. (Make sure you have the latest version of iTune on your computer)
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • My iPad is frozen on connect to itunes icon...will not let me do anything.  I tried to restore it to settings, but after an hour of updating, it said it could not be restored.  This ipad2 is only 3 years old.

    My iPad2 is frozen on connect to itunes icon.  I have tried to restore it to factory settings and it will not restore.

    Hello Pickelilly,
    Thank you for using discussions.apple.com, I am glad to help!
    What do you mean by connect to itunes icon? It's in recovery mode, right?
    Try forcing to turn off:
    Press the home button and power button together. This forces a power off.
    Try DFU mode
    Plug your device into your computer with a USB cable.
    Turn off the device.
    Hold the Power button for 3 seconds.
    Hold the Home and Power buttons for 10 seconds.
    Release the Power button but keep holding the Home button.
    After about 15 seconds you will be alerted by iTunes saying that it has detected a device in Recovery Mode.
    Related links:
    http://theiphonewiki.com/wiki/DFU_Mode
    https://www.google.com.lb/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&cad=rja&uact= 8&ved=0CCAQtwIwAg&url=http%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DbITIiGswjFI&ei= LmvPU6XlN6PC0QWwsIGQDQ&usg=AFQjCNEQvI_QGWOP3d8fMDtMAT_ExonaiQ
    http://osxdaily.com/2010/06/24/iphone-dfu-mode-explained-and-how-to-enter-dfu-mo de-on-your-iphone/
    Make sure you have the latest version of itunes  
    That may be a bug in your version and Apple has probably released a fix for it.
    I hope I helped,
    Ab

  • HT4061 Cant get power to ipad,  When i press sleep i keep geeting picture on screen of Cable connect and itunes symbol Even plugged into 110 cant get it to start

    Cant power up IPAD.  When i turn on i see apple (Normal )  then ipad shows a screen with cale connector pointing (Arrow ) to itunes symbol  Ive tried charginf with my 110 adaptor but still no luck ??  Help please  Jack Freeman

    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom

  • IPad Screen frozen with Not Enough Storage???

    Help please...
    My screen is frozen with the above message which underneath says This iPad cannot be backed up because there is not enough iCloud storage available (??)
    You can manage your storage in Settings
    Close                             Settings
    I've had the below message quite a few times especially when I'm docked on my Sony RDP-XA900iP but normally tap on Close and that's it. I sync my iPad regularly to iTunes and backup to iCloud on that it seems with no problem.
    Once it froze I tried turning off but will not let me swipe the 'slide to power off'. Connect to iTunes and it let me sync fine and download upgrades for my apps but no change to my iPad screen. Even changes the option from backup to iCloud to backup to computer and applied changes but still nothing.,,
    Any ideas please.

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • TS4036 Me ipad is frozen on connect to iTunes

    Oh my god I am scared my ipad is frozen I can't do nothing on it

    If you are saying that the iTunes logo and the USB cable are showing on the screen, then your iPad is in recovery mode and it will remain frozen until you restore it using the method described here,
    If you can't update or restore your iOS device - Support - Apple

  • Iphone 5 restore problems phone seems to be frozen with connect to itunes logo.

    my iphone 5 is stuck with the connect to itunes logo and even when plugged in to laptop stll the same nothing seems to work. any ideas on how to fix this.

    See this
    If you can't update or restore your iOS device

  • Ipad mini is frozen with connect to itunes picture have tried reset several times, no luck

    New update for iOS, ipad froze mid stream.  Has an itunes logo and connection cord picture.  Cannot reset, tried reconnecting to iTunes, and it doesn't recognize the ipad. 
    Any other ideas?

    You have two problems
    1. your restore from back up is stuck and may or may not restart on another better and faster network
    2. Your itunes on computer are outdated and in case if back up will not restart, you will need them in order
    to start factory restore, so you can unbrick your ipad, and then start restore from icloud again.

  • My ipad is frozen with icloud backup message

    Ipad screen frozen with icloud backup message

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • HT4623 I thought I was updating my IPad, i selected update and came back home to the screen frozen with the Itunes symbol and a plug in cord displayed.  I can not get it to do anything.

    I thought I was updating my IPad, i selected update and came back home to the screen frozen with the Itunes symbol and a plug in cord displayed.  I can not get it to do anything.  Any suggestions?

    Your iPad has gone into recovery mode and it needs to be restored now. The instructions are in this kb article.
    If you can't update or restore your iOS device - Support - Apple

  • My iPad is frozen with iTunes logo, arrow pointing to it, lock symbol and bar running to power inlet point. How do I get out of this?

    My iPad is frozen with iTunes logo, arrow pointing to it, lock symbol and image of bar running to power inlet point. How do I get out of this?

    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/ht4097
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • Itunes froze, now NANO frozen with "CONNECTED" stuck on screen!!!!!!!!!!!!!

    Hello
    Itunes froze, so i couldn't eject the ipod. I then tried to eject it in the Windows task bar, this then froze. So i restarted the computer and took out the ipod and now the nano is truly frozen with "connected" stuck on the screen, the ipod is totally unresponsive.
    Please advise
    Thank you much

    Mine did the exact same thing! I called apple and went through the whole name and email address thing. push the center and menu button and the same time. When an apple symbol shows up let go of the buttons and then your regular menu should be fine

  • My ipad is frozen with a black screen with a picture of a cord leading to the itunes logo.i tried to shut it down and the app;e icon comes out but again the cord leading to the itunes icon keeps on coming out. what should i do ?

    My ipad is frozen with a black screen with a picture of a cord leading to the itunes icon. i tried to shut down my ipad but the turn off icon wont show instead the itunes icon with the cord keeps coming out everytime i open my ipad. what should i do ? and i dont want to lose my pictures, videos and other documents in my ipad please help me ....

    I hope you have a backup if you don't want to lose your iPad contents. You have to restore the iPad now using iTunes on your computer. That's what the message on the screen means.
    Take a look at this.
    http://support.apple.com/kb/ht1808

Maybe you are looking for

  • Importing CD

    I have a folder I brought over from a PC with a bunch of CD's in it. They play on my Mac. I haven't been able to get them to load in to itunes so I would have one directory with all my songs. Does any body know how to import a CD from a folder ? Than

  • Error in Simple Search

    i have created simple page with simple emp search. i have created query region(construction mode is autocustomizationcriteria, for that i have created query components(simplesearchpanel and simplesearchmapping) and i am searching based on empno. when

  • Is there a way to make a hyperlink in Frame 12's CHM output open in a new brower window?

    I am authoring in Frame 12 and using the Publish command to make HTML Help (CHM files). To create hyperlinks, I format some text in FrameMaker with a character style, them add a Marker of type "Hypertext" to the text, using the marker text: message U

  • Printing Payment Advice

    Hi all, Please let me know how to take print outs of Payment Advices. I was trying transaction FBE1 to create payment advices. But the print option is to available here. Also pls let me know how to do Payment advices for F110 also. Thanks & Regards,

  • Extension data not showing in order.jsp & order_change.jsp

    Hi Experts, My requirement is to display the gross weight of the order in Order.jsp,Order_change.jsp. I have implemented the BADI CRM_ISA_BASKET_HEAD and method GETHEAD_GET_DATA to get the gross weight. In the BADI I am using CRM_ORDER_READ to get th