IPad screen has gone blue/green and will not work

My iPad 1 screen has gone to black when it is turned on and willl not work. Screen stays blue/green for about 30 seconds and then turns off. Unit is charged fully and has been updated to current operating software. Gerry

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
If that doesn't work then you could see if you can get it into recovery mode and restore it to your last backup : http://support.apple.com/kb/ht1808
But you might need to contact Apple.

Similar Messages

  • My ipad screens apple picture keeps blinking and will not open

    my ipad screens apple picture keeps blinking and will not open. I have tried pressing both top and bottom button together, pressing just the top, etc. and nothing...it just keeps blinking the apple?

    Hello llp03,
    Thanks for the question, that definitely sounds frustrating. The following troubleshooting assistant provides steps that may lead to a resolution:
    Apple - Support - iPad - iPad Troubleshooting Assistant
    http://www.apple.com/support/ipad/assistant/ipad/
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
    - Connect the device to your computer and open iTunes.
    - If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    - If the device doesn't appear in iTunes, try to force the device into recovery mode.
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Thanks,
    Matt M.

  • Ipad screen is locked.  SLIDE function will not work but screen does still rotate.

    ipad screen is locked.  slide function will not work but screen does rotate...

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • My iPad 3 screen has gone completely black and does not respond

    MY iPad 3 screen has gone completely blank (blacked out) and does not respond to either of the power buttons.
    ANy suggestions?

    If the battery is not flat, try a reset.
    Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

  • Ipad screen has gone stripey grey and black lines .

    Hi my iPad has gone stripey with black and grey lines ,and non responsive .Can anyone advise please.

    Hi kon and kathy,
    Welcome to Apple Support Communities.
    The article linked below provides a lot of great information and troubleshooting tips that can help you resolve the display issue with your iPad.
    Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
    If you see lines, missing sections, discoloration, or poor image quality
    Try to restart your device. If you can't restart, reset your device.
    If restarting or resetting doesn’t fix the issue, restore your device.
    If you still see the issue after you restore, contact Apple Support.
    So long,
    -Jason

  • My ipad screen has gone black but I can still touch the screen and unlock it and do things. I don't know what's wrong can someone help

    My ipad screen has gone black and I don't know what to do the screen still works and I can still unlock it and I can still type. But I don't know what to do can anyone help me it will be much appreciated

    If the reset doesn't do it then it's possible that the backlight or another part of your screen has broken. Unfortunately it's not really user servicible. I'd make an appointment at your local apple store and have them check it out. If your device is still under warranty and they don't determine that the damage was the result of 'abuse or neglect' (their words) then it could be a free replacement.
    I'd just do a backup before you take it in, just in case.

  • My iPad screen has gone black.  I have tried resetting it with the sleep and home buttons and it only flashes the apple on the screen for a nano second and then it goes black again.  I can even hear notifications arriving, but I cannot see anything...

    My iPad screen has gone black.  I have tried resetting it with the sleep and home buttons and it only flashes the apple on the screen for a nano second and then it goes black again.  I can even hear notifications arriving, but I cannot see anything...I'd rather not reset it to the factory settings as I have a lot of things I worry about using.  Either way seems to me that the system itself is working since I can hear it working, but its the screen that isn't.  It has not been dropped and has been in a case for years!  Please help!

    When the power is on and I press the home button, I can slide my finger where the slider bar "would be" and it makes the noise as if its "opening" flashes a blue screen then returns black...

  • My iPad screen has gone to a fuzzy grey and the machine won't operate. Any suggestions?

    My iPad screen has gone to a fuzzy grey and the machine won't operate. Any suggestions?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • My iPad screen has gone gray/black. I have tried both reset and restore, to no avail. Suggestions?

    My iPad screen has gone gray/black. I have tried both reset and restore, to no avail. Suggestions?

    Take it to an Apple Store for evaluation. It sounds like a hardware problem.

  • My ipads screen has gone black you can see when it turns on because the screen glows but thats it it wont come on at all?

    My iPads screen has gone black.  Ive tried to turn fixing it by holding in sleep and home button for 15 seconds but it hasnt worked
    what else can i do??

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • HT2534 When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.

    When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.

    You can create an iTune and App Store account without credit card details
    1. Sign out of current Apple ID if you are sign-in to one (important)
    2. Go to App Store and select a free app
    3. Tap INSTALL APP
    4. Create New Apple ID
    5. Confirm Your Country
    6. Agree with Terms and Conditions
    7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
    8. Create and answer your secret question
    9. Select NONE for Payment Method
    10. Fill in Billing Address
    11. Submit application for new Apple ID
    12. Wait for verification email
    13. When email arrive, verify your account
    14. Start downloading your free apps

  • I have a virus that has taken over Safari and will not allow me to use Safari or even shut down my computer.  It claims I need to send $1000 to a "green dot account to get my on line capability.Help

    I have a virus that has taken over Safari and will not allow me to browse of even shut down the computer.  The request is to send $1,000 to a "green dot" address to get the virus removed.
    Help!
    lawrencefromchatham

    Command, option and escape keys held down together will open the "Force Quit" dialog window.
    Quit Safari and then relaunch it while holding down the shift key.

  • TS1702 I have an app that appears to need to be updated. I clicked to update three days ago. It has started to update and will not finish. How can I delete the app while its in the middle of updating?

    IPhone 5
    I have an app that appeared to need to be updated. I clicked to update three days ago. It has started to update and will not finish. How can I delete the app while its in the middle of updating?

    Locked on an update can mean a couple of different things. So there are a number of things to try, but start with these.
    If you have a "waiting" icon, try tapping on the icon and see if you can pause the update/download. Of it pauses, tap on it again and see if it will resume.
    Try holding down on the icon until all of the icons on the screen wiggle. If the X to delete pops up on the waiting/stalled app -  tap the X to delete the app. Tao,the home button and the apps will stop wiggling.
    You can also try this and see if the downloads will resume. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • TS1424 Purchased book "The Fish That Ate The Whale". In the Purchased window, my previous purchased books are labeled "downloaded" but The Fish has a cloud ikon and will not download.

    Purchased book "The Fish That Ate The Whale". In the Purchased window, my previous purchased books are labeled "downloaded" but The Fish has a cloud ikon and will not download. I have tried to delete the book but no response.
    Redirected to Store and searched for The Fish. Description came up, pressed Download, message: you have previously purchased this book, go to Purchased and press Download. Followed instructions and message: you have previously purchased....... I'm in a loop.
    Assistance requested

    Hi there.
    Thank you very much for your quick reply, it's really appreciated.
    No need to apologize, I actually found the phrase "If your iPad ever craps the bed" amusing under the circumstances
    I checked the list of installed apps like you suggested (Settings>General>Usage>Storage>Show all apps) but this problem app is not in the list. I have also swiped down on the home screen to search for it, but again it does not show.
    While it has not let me download the app (and I just tried it again) it has helped me to eliminate a few things from the list of what to try, and I can definitely conclude that it has not downloaded.
    I guess I need to fire up my PC and download it / sync my iPad.
    Thanks again for your help

  • HT201412 My ipad has a software problem and does not work, request that it is loaded the software and there is no way that the operating system loads, is not restored. WHAT SHOULD I DO?

    My ipad has a software problem and does not work, request that it is loaded the software and there is no way that the operating system loads, is not restored. WHAT SHOULD I DO?

    This is an iPad user to user forum, so you are not addressing Apple. Depending on how many user helpers are on-line, it may take several hours, or longer, to get a response.
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

Maybe you are looking for

  • Help needed in SD VC Assigning Object Dep. for all values at the 1 time

    Dear, Gurus I am successful in achieving pricing in VC the long way example: If Characteristic is Car_Color and values Blue, Red. I assign $self.Z_CarPrice=u2019Redu2019 and it works. Z_CarPrice is basically the variant condition linkage with tables

  • Lightning to vga adapter not working after ios 7 update

    After I installed ios 7 on my iphone and ipad, lightning to vga adapter A1439 stopped working on both machines. I thought that the first update would solve this problem. However, I recently installed 7.0.3 update but both machines still can not see t

  • Control creation of PR from project before release

    Dear All, Can we make settings such as before releasing the project system should not allow us to create PR/PO ? regds, CB

  • Any alternate function for FLD in NW7.5

    Hi All Is there any alternate function for FLD in NW7.5. I can't use FLD in NW. In one my script logic i need to get value from property and multiply with an account. Edited by: satish193 on Mar 29, 2011 2:15 PM

  • InfoObject not found in Multiprovider Template window

    Hi , I have created a Multiprovider for two ODS & one info object. while creating multiprovider ,when i select one ODS as template to pass the characteristics to pass in characteristics field in multi provider , one info object is missing & unable(in