IPad screen locks up after upgrading to Ios5

My touch screen stops responding and then I can't switch apllications or turn it off.

First, try a system reset.  It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

Similar Messages

  • After upgrading to ios5.1, the camera icon on lock screen just keeps on bouncing and wouldn't work. I've reset twice already. Any solution for this? TIA

    Can somebody help me about this? I dunno what seems to be wrong but after upgrading to ios5.1, I can't use the camera on lock screen. It just keeps on bouncing. TIA

    You have to slide up while touching the icon instead of tapping it.

  • After upgrading to iOS5,everything was restored.I couldn't find the downloaded movies I had before.I kept on syncing it with iTunes.I can see videos are taking up space on my Ipad 2 memory but it doesn't appear,only songs appear.thank you..

    After upgrading to iOS5 & everything was restored,I couldn't find the downloaded movies I had before.I kept on syncing it with iTunes.I can see videos are taking up space on my Ipad 2 memory in the iTunes page but it doesn't appear,only songs appear on the Music.thank you in advance for your assistance..

    They are now in the videos app!

  • After upgrade to ios5, none of the apps will load.  Touching an icon does not open the app; it just blinks and returns to the screen.

    After upgrade to ios5, none of the apps will load.  Touching an icon does not open the app; it just blinks and returns to the screen.

    Go to the App Stor and download an app- any free app will do, it doesn't matter.
    Doing this usually "resets" your device's "app awareness" and you should be able to run any app with no problem.
    And no, you don't have to keep that free one you just downloaded.  You can delete it if you don't want it.

  • I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."

    I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."
    I wiped it out and restored from backup but I am still getting the same message.

    I uninstalled and reinstalled iTunes and that fixed it. Here are the specific instructions that I was given.
    ~~~
    Try the following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch
    ~~~
    Good Luck!
    ~R

  • HT1386 I can't use my iphone after upgrading to IOS5

    Can someone help?  I can't use my iphone 3gs after upgrading to ios5.

    I have iphone 3 GS.  I upgraded the software to ios 5 and the phone is now can't be accessed.  All I can see is the Gray screen says Iphone.  It ask me to set it up, choose your country, wifi, etc.  when I did that, it always stop at the page where it says "Apple activation server is down, please try it again".  Tried so many times but the same messages kept showing up.  Connect it to Itunes, itunes said there is no sim card installed.  I went to AT&T to get the new simcard and it still saying the same thing.  don't know what's wrong with it.

  • After upgrading to iOS5 I can not auto download anything. The buttons will not switch to ON. Any thoughts?

    After upgrading to iOS5 I can not set the store to auto download anything. The buttons will not stay in the ON position. Any thoughts?

    I experienced this one time and this is what I did and it worked for me. You can try it as well and see of it works for you.
    Settings>Store>Apple ID - tap on your ID and sign out. Restart your iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>Store>Sign In. Then go to automatic downloads and try again.

  • Can't connect to 3G network after upgrading to ios5.1 on iPad2.

    Has anybody exprienced this after upgrading to ios5.1 on the iPad2? I can't connect to 3G network at all. It keeps giving a message of "You are not subscribed to a data network:. But I still have data left this month on my cellular contract.

    Hi Miky. After upgrading to ios 5.1 I had the same problem.
    I reset the APN on network settings and rewriting the same. iPad now working on 3G.
    My operator is 3 ITA
    iPad 1 64 GB Wi-Fi + 3G

  • TS2634 ipad screen lock and ask for passcode

    my ipad screen lock and ask for passcode, which i don't remember. my kid change the passcode.  Aslo, it talks for passcode 4 values require.
    Is there any reslove for this issue?? Thank you.

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I cannot edit my contacts after upgrading to IOS5 .

    I cannot edit my contacts after upgrading to IOS5 . I can restore to factory settings but I want to keep my messages as they were.. what can I do? please someone help.. thanks in advance.

    HI MortenEJ,
    Thanks for your responce.but already done doing "Restore factory settings" .. and when Im doing "back up from" ..
    I still encounter the same problem. I have important messages in my inbox I want to keep. 
    I even try to upgrade to the newest version. IOS 5.0.1. but still the same..My main problem is my contacts. I dont have "+" add contact button and inside each contact.. I dont have the "edit" button..

  • I have an iPad 2 and want to upgrade to ios5 but have no pc what can I do?

    I have an iPad 2 and want to upgrade to ios5 but have no pc what can I do?

    You can't do it without a computer, although once you get ios5 that necessity will be gone. I would recommend taking it into the apple store. They will do it for you.

  • Can't unbrick 3GS after upgrading to iOS5.1.1

    i cannot unbrick my 3GS after upgrading to iOS5.1.1 it is not giving me an option to factory reset. When i hook up with iTunes to unbrick it after 3-4 mion it says there is no SIM card please insert SIM and SIM card is inside phone which i was using before upgrading iOS. please help
    thanks

    Assuming you're still using Telus, I'd say take it into their shop and get a fresh replacement SIM. If it wasn't hacked or jailbroken, that's the most likely explanation. I realize you've tried different ones, but it's worth a shot.
    You might want to try putting it in DFU mode and restoring again as well. If those things don't work, it's probably time for a trip to the Apple Store to have it looked at.

  • After upgrading to iOS5 - phone ear speaker is NOT working

    Well, my excitement from upgrading to the new iOS5 on my iPhone 4 gave way to frustration when I found out that the phone's built-in ear speaker is no longer working. Tried everything from a hard reset, to re-syncing with iTunes, playing around with every setting I could find, and a few "fixes" I found online that were absolutely useless and did nothing.
    This only appears to happen when making or receiving phone calls (and listening to voice mail) - when I select speaker, all audio plays normally, but clicking back over to headset, and nothing. Earbuds also work okay. 
    Prior to installing iOS5 this problem did not exist in the least.
    Apple - I am going to ASSUME you properly beta tested this OS on ALL compatible devices prior to its release, did you not? Apparently (from my web searching) I am not the only person suffering this malfunction with their iPhone after upgrading to iOS5.
    Is there anyone out there that has figured out a way to fix this, or am I just screwed? I don't know how to revert back to iOS 4.3.3 if that's even possible at this point.  This is a phone I use for work, and I need to have this functioning properly.
    Please help. Anyone... thank you. 

    I'm having exactly the same problem with my iPhone 4. Since the upgrade to IOS5, I've noticed I can no longer hear calls through the ear-piece, though using the speaker phone option works fine.
    I took my phone to the  Apple Store in Sydney and they advised that the problem was related to my sim card & that I should contact my telco for a replacement. I seriously didn't believe the Apple rep when she said this, but politely said thanks, went home and tried it out by swapping my sim with my wife's.
    Guess what... it didn't make the slightest difference.
    My wife has an iPhone 4 still running IOS4 and the ear-piece works fine. I even put my sim card into her phone and it worked fine as well. So the issue is definitely not related to the sim card.
    It sounds like a common issue affecting a lot of iPhone 4 users that have upgraded to IOS5. I'm surprised Apple hasn't acknowledged this and have a patch available to correct (it doesn't sound like a hardware issue).
    Anyway, looks like a trip back to the Apple store for more great suggestions.

  • How do i get all my contacts back after upgrading to ios5?

    After upgrading to ios5, I lost all my contacts, notes, pictures, videos, EVERYTHING ! All my apps were back, but not in the folders I had set up. I lost all my notes from school, my homework, my passwords for everything too...this really *****.

    You can look at this document about a restore, http://support.apple.com/kb/HT1414, but it will show you that after you restore, it takes you to the Setup assistant which is what  you encounter with a new device. From there, you select to restore to a backup and select the iCloud backup.

  • Bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?

    bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?
    I'm trying to use the iphone as a remote with keynote, which again worked before the upgrade

    Hi russellpaton,
    Thanks for visiting Apple Support Communities.
    If your iOS devices are not communicating with each other after updating to iOS 8, the troubleshooting steps in this article can help resolve this sitation as well:
    If you can’t use a Bluetooth accessory or car kit
    Cheers,
    Jeremy

Maybe you are looking for

  • FW Drive Only Shows Up in Disk Utility

    Hey All, We've got a Granite Digital Firewire Drive that we use for nightly backups (with a fantastic piece of software called Deja Vu). To assure we don't confuse the backup drive for the regular drive while working, I changed the permission of the

  • Trouble with c:out in jstl

    I am trying to use JSTL but it is not working very well. For instance, <c:out value="${4+4}"/> writes out 4+4 instead of 8. Any idea what is going on? Message was edited by: tanitm

  • Pre-Order Multiple Copies of Games ($10 Reward)

    Sorry if this has already been asked before but I couldn't find a thread that touched on this question...  I'm a GCU member and have recently pre-ordered Batman for PS4. I know that when I pick up the game I will be credited with a $10 reward for pre

  • Attaching digital signatures to email

    Hi, Is it possible to attach digital signatures to emails that are being sent out from SAP R/3. Thanks Rajesh

  • 2 small questions about charts

    Hi All, is it possible to : 1. rotate 45 degree the X Axis in flash 2D line chart ? i tried modify the XML as in column chart but with no success. <strong>i was ale to rotate it by migrating the svg chart into flash chart </strong>:) 2. is it possibl