Ipad Screen protector with impact protection?

I need to get a Protection for my ipad and iphone5 from my kids, and I came a cross Rhino Shield on marshable.
http://www.kickstarter.com/projects/1081571316/rhino-shield-the-impact-resistant -screen-protector
looks very good indeed, and this is what i want. The question is has anyone has any experience with this Screen protector before?

Just keep the screen clean by blowing or brushing off dust and debris before and after use and when stored and you should be fine. The Apple case is a nice case but it does not keep debris and dust away from the glass since it simply sits on top of the screen with no seal. In addition to the Apple case get one of those very inexpensive foam zipper bags which will not only keep dust and debris away but will protect it from drops and bumps while traveling and storing.
Do not use microfiber cloths. A fluffy 100%cotton piece of towel is what you should use to gently wet clean and dry it with. Do not reuse your cleaning cloths. Wash before using them again. I keep a small ziploc bag with a few cut pieces of towel inside in my iPad zipper case.
I used to be seriously into photography and had many expensive lenses with much more delicate glass than the iPad's and these are the things I did and never once did i scratch a lens. The iPad has such a gorgeous screen that is a shame when it is covered. I have had mine since they came out and my glass looks brand new. The cause of scratches is not through typical use but because a harder than glass piece of debris gets in between the glass and whatever else is pressing against that debris, usually not your finger. Just keep it clean before and after use and keep it in a sealed case in addition to your Apple case and the chances of scratching the screen will be almost zero.
The ipads on display in stores are very rarely scratched even after thousands of people touching and using them every day. That shows how tough the display actually is.

Similar Messages

  • Ipad screen protector film

    Is ipad with retina display comes with any screen protector? Or apple produces the same for separate sales? otherwise which is the other go?

    If older kids and adults use the iPad, you don't really need a screen protector. If very young kids use the iPad, a screen protector might provide protection of the screen if the kid drags a toy or some sharp object across the screen. I installed one because my grandkids use the iPad.
     Cheers, Tom

  • Need a screen protector with Musemee Notier stylus?

    I have an Ipad Air 2 which I love, and am looking for the right app/stylus combination to take notes.  Lots of apps are good -- the issue is the stylus.  I've tried several and just got the Musemee Notier which is spectacular.  But the screen protector I purchased as a safeguard did not apply well and I am going to return it.
    Does anyonen know if  I need aa screen protector with a high precision stylus such as the Musemee Notier?
    Thanks!

    Hey
    I just boght the new Air 2. Does the Musemee Notier v2 work with the Air 2?
    I'm searching the right Stylus to take notes at university and i found nothing about the Musemee and the Air 2.
    Greetings!

  • Is it save to apply invisible sheild screen protector with the provided liquid? I'm worried about water damage to my 4s

    Is it safe to apply a invisible sheild screen protector with the liquid provided? I'm worried it will cause liquid damage to my 4s

    Avoid the dock connector and the headphone port. That's where the water sensors are located. Just apply a very small amount of liquid for the InvisiShield or whatever it is.

  • Best screen protector with long lasting oleophobic coating?

    Which is best screen protector with long lasting oleophobic coating? I know tech armour and nilkin for example.

    I'm not sure anyone here could answer that difinateively but my 2 cents would be that an actual adhesive could perhaps right away or over time interfere with the factory coating...
    There are a lot of screen protectors that rely on static cling that work just fine like the ones I use found at the link below... I've used those since the first iPhone I put a cover on years ago and have never been dissappointed at all...
    www.powersupportusa.com

  • Do you recommend using a screen protector with the new ipad?

    I just got an ipad with retina display.  I am wondering if I need to get a screen protector for it?

    A screen protector can also significantly degrade the touch screen experience.  I know one very talented sketch artist you does some amazing art on her iPad and she says she cannot do it on anything but a naked iPad screen as otherwise the screen looses too much sensitivity.
    They also make most stylus work poorly too, for the same reason (I use a stylus a lot with NoteShelf and Note Anytime for work stuff, and a screen protector really interfers with it).
    Just to warn you that, depending on how you use it and the type of apps you use, you may find them more or a problem then a solution to anything.

  • Anti-***Reflective***, not Anti-Glare, iPhone/iPad Screen Protector?

    Short version:  Does anybody know of a true anti-reflective screen-protector sheet for iPhone 4S or for iPad?
    More detail: 
    Way back on my old iPhone 3G, I had an anti-reflective screen protector sheet.  It worked really really great in direct-sunlight environments!  The only downside was that it did show up fingerprints, but they didn't show up much when the screen was on, and they were easy to clean off. 
    When it finally wore out, I bought somebody else's screen protector that they called anti-reflective, but it was actually just anti-glare.  **Anti-glare** is that frosty finish that does not actually dim reflections, but instead makes them fuzzy.  In fact, it makes the image on the screen a bit fuzzy too, which is why I don't like them.  **Anti-reflective** is like a camera lens, or most glasses, where it reflects images still completely focused (and doesn't fuzz up the screen image either), but reflects it at a much dimmer intensity, often with a greenish hue.
    Best I can tell, no such product exists anymore, for iPhone or for iPad.  Do any of you know of such a thing?

    I did spend some time searching, but could not find any similar discussion in this forum.
    That is because this is NOT a discussion forum.
    It is hosted by Apple for asking technical support questions
    Suggest you read the terms on use of this forum for future reference
    and read carefully the link provided above by Pogster
    You are lucky Apple actually fixed it for you considering the terms for returning for repair were not followed

  • Should I use a Screen Protector with Otterbox Defender or Griffin Survivor?

    I bought both of these rugged cases and keep hearing that the actual cases can scratch the phones.  Should I use a screen protector on the phone face and back as well?  I assume that may not fit in the cases if I do that.  Anyone have any experience with these cases?

    Mine
    Redwood_Empire wrote:
    I have the Ghost Armor (same as ZAGG's invisibleSHIELD) installed on my Iphone and my otterbox defender will be here today (anytime) I will let you know how it goes or how it fit as soon as my defender get delivered by FedEx.
    Do you have the shield on the front and back?  I read they do not fit in the Otterbox with both.  I would bet one side may fit.  I think if you use a thin one like the Verizon site has (PureGear Display Protectors) on the front I bet it will fit.  I have the Survivor case and have not head a chance to try the shield with it.  I got the phone, and first threw it in that case.  I know what to get a shield on it if possible.  Please let me know if it fits.

  • Ipad screen protector

    hi all just a bit of a stupid question is there a difference between the ipad 1 and ipad 2 screen protectors as i have some left over from the old ipad just wondering if i need to buy new ones before i get the ipad 2

    I think folks have reported a few mm difference in the size of the display's surface.
    Dah•veed

  • Iphone 6 screen protector with exact cutouts

    Been looking for a good screen protector for the iPhone 6.  However all I am seeing are ones with a full cutout for the home button.  I find them kinda ugly. Would like it to just have the circle cutout for the home button.
    Has anyone come across one without the large cutouts?
    Thanks and I look forward to your reply.

    I just got my illoome screen protector today And it has the very precise cut outs. The sides and edges are covered

  • Screen protector with privacy

    I purchased a screen protector for my 2G and it came with a privacy 'thingy'. Sorry dont know the right term. Anyone have any experience with these and would recommend a brand. (I can't remember where/what I purchased and cant'find anything by search the topics)
    I really adored being able to peruse my phone email, etc., and the person next to me could not see what I was doing. Thnaks

    3M makes privacy film, but you would need two, since landscape needs a different orientation.
    <http://solutions.3m.com/wps/portal/3M/en_US/ComputerFilter/Home/ProductInformat ion/Products/FramelessNotebookLCDPrivacyFilters/>

  • IPad Screen frozen with Not Enough Storage???

    Help please...
    My screen is frozen with the above message which underneath says This iPad cannot be backed up because there is not enough iCloud storage available (??)
    You can manage your storage in Settings
    Close                             Settings
    I've had the below message quite a few times especially when I'm docked on my Sony RDP-XA900iP but normally tap on Close and that's it. I sync my iPad regularly to iTunes and backup to iCloud on that it seems with no problem.
    Once it froze I tried turning off but will not let me swipe the 'slide to power off'. Connect to iTunes and it let me sync fine and download upgrades for my apps but no change to my iPad screen. Even changes the option from backup to iCloud to backup to computer and applied changes but still nothing.,,
    Any ideas please.

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • IPad screen unresponsive with boxes around icons????

    OK so I was browsing some photos in my iPad (Current Gen) on the 500px photo app. The app became unresponsive and was missing buttoms normally there, so I clicked the home button and got to the home screen. Once I did this, I was unable to scroll between my home screens. Every time I touch the screen, a rectangular box appears the app nearest to where I am touching. If I touch an app, it will not open, I can barely get in to settings. I plugged in to itunes and did a restore but it did the same thing. I powered it off and on a few times and the same things happens. When I touch the slide to unlock, a rectangular box displays around the slide to unlock and it takes several swipes before responding. This rectanuglar box floats around and it takes 20 clicks to get in to settings. Any idea whats going on and why I cant fix this? I am running 5.1.1

    If VoiceOver is on and you want to turn it off from the device instead of from iTunes, remember that a double-tap acts like a single tap and you need to use three fingers to scroll when VoiceOver is on:
    Press Home.
    Tap Settings. Then double-tap Settings.
    Tap General. Then double-tap General.
    Use three fingers on the screen to scroll to Accessibility.
    Tap Accessibility. Then double-tap Accessibility.
    Tap VoiceOver. Then double-tap VoiceOver.
    Tap "On" next to VoiceOver. Then double-tap "On" to turn it off.

  • Ipad screen frozen with connect to itunes symbol

    I was prompted to to update my ipad and the screen has been frozen despite numerous attempts to restore it to original via itunes.

    No, the iTunes icon and the cable mean that it's in recovery mode, you will need to connect it to a computer's iTunes so that you can reset it - you can then restore/resync your content to it

  • Protecting cracked ipad screen from further damage with protector

    Howdy.... I have an ipad 2. The screen recently developed a spider web-type crack. I honestly have no idea how it happened. I did not drop it. I've been on a number of plane trips recently and noticed it after checking into a hotel. It was in my cabin luggage. Possibly someone dumped something on it in the overhead bin, or it got tossed around??
    Anyway, it does still seem to function completely fine. Towards the edge of the screen on one side there is about 1 mm of depression/displacement of the sides of the fracture. Otherwise the cracks are non-displaced. I have no problem using it.
    I am in a country with no apple stores. I could submit to an authorized repair place and wait for it to be repaired. However, I am anticipating ipad 3 coming out soon and I am wondering about the option of simply not fixing the screen at all.
    I bought an ipad screen protector and put it on the screen under the theory that this might inhibit cracks from propagating further. Anyone have any insight or ideas about this? What happens when you use a cracked ipad screen over time? Does it inevitably get worse?
    I am wondering if I can just use it as-is with the screen protector until ipad 3 comes out. The cracks are actually hard to notice during actual use, with the screen on.

    The glass is laminated structure, the top layer is oleophobic plastic very thin, then there is the sensor and finally the glass. Same for ipad and iphone. See below.
    If it works, keep going. Since you plan to buy a new one anyway. A case of 'its broken, but no need to fix it' !

Maybe you are looking for

  • Error when generating report in exe built from LV8.6

    Hi all, Using LV8.6 and report generation toolkit 1.1.3 i have one application in that i am generating report in 'word' and 'exel'. I have built that application as a EXE. in that exe i am unable to generate report. i am getting following error: Poss

  • Transfer playlists and content from iPod Touch to new computer

    I was trying to search for old answers on this topic, but instead the system is forcing me to create a new post.  My old laptop crashed, and the backup I had of my iTunes was outdated.  I have more current music and playlists on my iPod Touch than ar

  • Insert into table.

    i want insert rows in table b having 5 columns from table a having 3 columns how to achieve that ? eg.. table a column 1 column 2 column 3 table b column 1 column 2 column 3 column 4 column 5... i used beloc script insert into usename.table b @dblink

  • How to allow a user to create his workspace in java(swings)

    hello guys .. i have to develop an interface (GUI) where i allow the user to create his own workspace , could anybody tell me what is the code we need. are there any specific inbuilt functions and methods.. please help Imran

  • Idoc of basic type INVOIC01 freight charge feild

    Could any one tell me how to  Identify a field on the Idoc of basic type INVOIC01 to populate the freight charges in SAP. Need to find whether field is available or not. This is for inbound idoc. Pls give the inputs Thanks in advance