IPad software upgrade too big to download

I hooked my iPad up to my PC to synch with iTunes. iTunes said the iPad needed a software upgrade. It was 565 MGs. After 2 hours, I had 200 Mgs loaded, and 5 hours to go. My satellite server let me run for another hour and then cut me off as I had exceeded fair use bandwidth. Where can I get this large file downloaded? Can I go to the local computer store and use their DSL, without taking my own PC with me?

We took the iPad to the library with my husband's laptop, since we knew it had iTunes. the iPad would not speak to his iTunes. I guess it rather fancies its home base iTunes on my desktop PC. So end of the line for getting this update, unless I can go to the physical Apple store and get them to upload for me.

Similar Messages

  • Why does is say purchaseable items too big for download every time I try to download an app?

    Every time I try to download a game or app my iPhone says error message purchasable items too big for download. I even changed my billon information. Anyone know what the problem might be?

    Connect your iPad to iTunes on your Mac/PC and then go to your iPad's summary window. Then click back up if you want to back up your iPad first. After that click restore. Later it will ask you if you want to setup the iPad as a new iPad. Select the option to setup your iPad with your latest back up.

  • Dear all,  After Software Upgrade too iOS 6 , Face Time and iMessage is Not working anymore. E Mail is working. Any Ideal what to do. Kind Regatta from Hamburg Germany

    Dear all,  After Software Upgrade too iOS 6 , Face Time and iMessage is Not working anymore. E Mail is working. Any Ideal what to do. Kind Regards from Hamburg Germany

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
     Cheers, Tom

  • Cannot Sync to iPhone Cause iPad Software is too Old

    Driving me nuts. I want my ipad and iphone to sync and when I try to restore my brand new ipad to my iphone, I keep getting an error that says, "The backphone "iPhone" cannot be restored to this iPad because the software on the iPad is too old."
    But it's not. I've done this 5 times now. It is definitely up to date. Even updated the firmware on my iphone. No matter what though I keep getting this error.
    Any ideas? Do you guys mirror data on both devices or not? Maybe I don't need to do this in the first place.
    Seems like the right thing to do though.
    Thanks for your help.
    Peter

    Am currently having the same issue! My iPhone 3GS is running 4.0.2 and the iPad, which I bought tonight, is running 3.2.2, and everytime I try to restore from the iPhone backup I get the same error, ie that the iPad software is too old and that it needs to be prepared as a new iPad first, then updated, then restored from the iPhone backup.
    ....but it doesn't work!!!!

  • When trying to sync to upgrade I get a message "Ipad software upgrade server could not be contacted." Then next message "Make sure your network settings are correct and your network connection is active or try ag

    when trying to sync to upgrade I get a message "Ipad software upgrade server could not be contacted."
    Then next message "Make sure your network settings are correct and your network connection is active or try again"
    iPad, Windows Vista

    Try rebooting your router and or cable modem. Unplug it/them for about 30 seconds and then plug back in. See if it works then.
    Reboot your iPad as well.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Epson Workforce 845 will not print after IPad software upgraded

    All worked well before I upgraded my Ipad2 software yesterday.  No longer prints.  Message when I press print says it is searching for an AirPrint printed, and finds none on my network.  Nothing has changed except the software upgrade.  hat must I do?

    Thanks...other computers on the wireless network continue to work well.  The Epson Workforce 845 is an approved printer on AirPrint.  Trying to find a printer setup screen on the iPad without success.  When I bought the new wireless printer, it worked right out of the box with the iPad.
    I am tempted to restore the software to the original factory settings through iTunes but fear losing everything that has been added since I got it.  A disclaimer on iTunes says I can back all up, and later reinstall after I reset to original factory settings, but I am skeptical.  Any experience in this area?

  • HT6114 The update is too big to download at once.Repeatedly I failed to download due to the low internet speeds.Any other way to download in patches and group them later.

    The Apple Store indicates one update is available for my MacBook Pro OS X Maverick v10.9.2.But,the same is already shown as installed on 26 April thereitself at the bottom of the APP store.But,i remember it was not fully downloaded then and it was cancelled.The update is too big and due to low internet speeds here,we are finding difficult to download.Can it be downloaded in patches.How?
    With Regards
    S.ChandraShekhar

    The only thing you can do is pause the download. There is no way to divide it into pieces.

  • I want to update my iPad software on iTunes.  It downloads but will not verify, what can I do?

    Can I update my iPad software on my Mac at work and then use it as normal at home on my PC there which has the latest version of iTunes but will not download the updated software for the iPad?

    With that one, I'd try the following document:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  • HT4623 Ipad software upgrade problems because of sim card

    when uptading ipad software it demands the sim card, which i don't use, because i only use wifi. It can't let me pass the configuration stage of the sim card. How can i elude that step ando go on with the upgrade?

    Hi, here is the update:
    I was forced to register and then got the answer: this computer is already registered.....!!!!
    So an Apple problem !!

  • Interface after upgrade too big

    Hello everybody,
    I upgraded my S8-50f yesterday to the newest version (S000214-150629_ROW).
    Since then the interface of my tablet appears to be way bigger what limits my visible space.
    Unfortunately I haven't found any option to change this in the settings. Changing the font size didn't show the wanted effect.
    I'd like to know whether this is intended to be like this or I'm just too stupid to find the proper setting for this. Although not a huge problem, for me it's less comfortable to use the device like this and would be really happy if somebody could help me.

    If you are running Windows, press ALT+SPACE to get the system menu that allows you to restore, move, resize, minimize, maximize your window. One of these might help.

  • HT201210 iPad software upgrade interrupted

    Upgrade to iOS 6.01 stopped after "Welcome to iOS 6.01" welcome screen & before installation completed  because user called away and unable to complete the installation steps for 24 hours.   iPad was connected to charger but will now not turn on and is not recognized by iTunes. How can it be restored?

    Reboot the iPad and see if it will start up this way.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Then try to update again. If the iPad is not recognized in iTunes, try restoring with recovery mode. I hope that you backed up the iPad yesterday when you initially tried to update.
    You can read about recovery mode here.
    http://support.apple.com/kb/ht4097
    Or you can follow this.
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • Is there a way to stream movies or mirror them from my iphone onto my ipad screen? My iPad memory is too small to download the movies from iTunes but I have them downloaded on my iphone.

    My ipad is only 16gb and just about full but my iphone is 64gb and has plenty of space. I have bought movies on iTunes and have been watching them on my iphone, but this seems a bit silly as I have an ipad with a larger screen. Is there a way to mirror or stream the movies from my iphone to my ipad?

    Thx - the videos are on my Ipad - that is the problem - they are taking up all the storage and there is no room for anything else. Is there any place I can store them so that I can access them from time to time, but not have they use up all the space on the IPad? Sounds like the cloud is out...

  • Files are too big to download...what do i do?

    ok. i have been working on a french project constantly for about 3 days now.
    we have to create a cooking show and edit a video to show to the class. my group decided to be all fancy and use a nice canon digital camera (not sure what kind, it's not mine)...i uploaded the videos to my macbook and all was going well until i realized about half of the files are missing.  i now have all the video files i need on a flash drive and from there, i can view them via quicktime player, but that's all. it's strange because the sizes range from about 5 MB to 500 MB, and they're all pretty much the same length. can anyone explain this? 
    I have tried dragging these large files to iphoto and it cannot read it. when i drag it to my desktop, i get this message "the file '--' cannot be copied because there is not enough free space".  When I drag it into a new even in iMovie 08, i get "Move Failed: error code 1429").  It is quite frustrating, because I can view the exact files i need, but I can't do anything with them. 
    After getting the message that there is not enough free space, I thought backing up my computer would help.  I went to Best Buy and asked a guy there on the "Geek Squad" to help but he was a PC specialists and the mac specialists were not in that day.... so we just bought a 500 GB hard drive. I spent the night backing up my computer with Time Machine, which I think worked.  Then, I went through and deleted unnecessary videos and pictures.  Then I tried, once again, to drag the file to my desktop. I got the same message. It is THE most frustrating thing, and I have no idea what to do anymore.  I have half of my cooking show videos and it won't work without the others. HELP.

    Are you using Filvault perchance?
    What format are all these other drives using?
    errFSNotEnoughSpaceForOperation = -1429, /* There is not enough disk space to perform the requested operation */

  • I started to download a free app but it's too big to load without connecting to wifi. I want to delete it. Can anyone tell me how to do it please?

    I tried to download a free app. It came up with an error message saying it was too big to download and that I need to connect to WiFi. The icon is still displayed and I can't delete it (I've decided I don't want it. Can anyone tell me how to delete it - there's no x displayed on the icon. Thanks

    Hi stripers
    You will either a) need to connect to WiFi and complete the download or b) dock your iPad and remove it from the apps list once synced (your iTunes will more then likely want to complete the download first also, which you may be able to cancel in the downloads section).
    Regards
    Damon

  • Purchased episodes of The Killing Season 2 and tried on both ipad and computer - ipad can't download (too big maybe) and computer (Numb) is missing and others are not in sync.  Downloaded most recent itunes.  Help please.

    Purchased the first four episodes of The Killing Season 2 and am so frustrated.  Tried downloading on both my computer and iPad.  Think they might be too big for iPad - says it's downloaded but can't open even though GB says there is enough.  Am missing episode (Numb) on my computer and the ones that I have downloade to computer are not in sync with sound.  Have downloaded newest version if iTunes.  Please help.

    Here's how to do it.
    1. App Store, iTunes Store should have the same AppleID on Computer and iPhones. (Free to share apps, music and books... )
    2. Person A uses the same purchasing account for everything (ie. email, contacts and ...).
    3. Person B have the same purchase account see no. 1 (for App Store and iTunes Store) but create a second AppleID for iCal, e-mail, contacts  and etc.

Maybe you are looking for

  • Hi I can not get my printer to connect to the internet.

    Hi I can not get my printer to connect to the internet. it is connected to my network according to wifi test printout but my computer can not find it. When I try to download apps directly from the printer it says that it is not connected to the inter

  • How do I clear permissions for SCC VIs? I am trying to modify the source code.

    I'm trying to use SCC protected VIs in a new project, but original permission has been lost. I'm using Labview 7.0 that does not have the SCC option.

  • Strategy pattern question.

    Can the following scenario be called strategy pattern? public class StrategyExecutor {      public static void main(String[] args) {           Strategy[] strategies = {new FirstImpl(), new SecondImpl()};           for(int i = 0; i < strategies.length

  • Flash drive undetected on macbook pro

    I recently bought a PNY 4gb flash drive, but when I inserted it in the USB port, it wasn't detected.  I tried both ports, restarting the computer... Any other suggestions?? I don't know what the problem is

  • Templates- titles??

    I've designed my website using templates...am I right in saying ...that titles have to be general and not specific to each page? Thanks