IPad/ Sony dcr-sx40 compatibility

Can't read downloaded movies from my Sony dcr-sx40 om IPad version 3.  Also, Safari won't download MPEG 2 software from apple.  How do I get IPad to use thes movies?

Well, I went to the pages you suggested and did make some adjustments in hopes of them solving the problem. They didn't work, but they did help me to notice a minor detail that might have something to do with the problem. On the Sony TRV950, the LCD display indicates that I have a firewire cable connected to an active device by displaying "DV IN" on the screen. What I've noticed, since I've tried using it, is that it sort of "flickers." It appears and goes away sporadically. I even noticed in the menu when I went to configure the so-called iLink, there is a section called "ADJ TEST" and I can't seem to select it because it, as well, flickers in the same manner. I'm continuing to look for discussions on this camera to see if this is a common problem, but logic leads me to believe that I may have a bad connection in the cable itself.
Any comment...or idea of what to do at this point?

Similar Messages

  • Sony dcr-trv14e compatibility

    Hi guys,
    I have a sony dcr-trv14e I am trying to connect to my iMac and iMovies '11...
    It isn't on the compatibility list (which is annoying) and I have tried to connect it via usb and via firewire but I can't get it to connect in any way at all.
    I can't even find it via the system profiler.
    Do I have any other methods or any hope at all of connecting this camera to my iMac so I can get some old MiniDV tapes on to the computer or do I have no hope.
    Thanks.

    Hi
    It should work. See my list.
    *NO CAMERA or A/D-box*
    Cable
    • Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
    • Test another FW-Cable *very often the problem maker*.
    Camera
    • Test Your Camera on another Mac so that DV-in still works OK
    • Toogle in iMovie pref. Play-back via Camera (on<->off some times)
    • Some Cameras has a Menu where You must select DV-out to get it to work
    • Camera connected to "charger" (mains adaptor) - not just on battery
    • Camera set in Playback mode - NOT Recording mode
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK eg recording and playback to TV)
    A/D-box
    • Is the dip-switches set right ?
    • Set to same standard as recorded/editing eg NTSC 29.97fps or PAL 25fps
    • Try resetting it
    Connections
    • Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
    Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
    the Movie project to dedicated external hard disk.
    • FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
    Mac
    • Free space on internal (start-up) hard disk ? Please specify the amount of free space.
    (Other hard disks don't count)
    I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
    after material is imported and edited.
    • Does Your Mac have a FireWire Port
    • White MacBooks - don't
    • MacBook-Air - don't
    if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
    else - NO SOLUTION
    Only option as I get it is either
    • Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
    • Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
    • If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
    You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
    has one and this FW-Card-port works greatly.
    SoftWare
    • Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
    • Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
    • FileVault is off ? (hopefully)
    • Screen Saver - OFF
    • Energy Saver - OFF
    Using WHAT versions ? .
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie’08 (7.1.?), 09 or 11 ?
    • iMovie HD 6 (6.0.4/3) ?
    *Other ways to import Your miniDV tape*
    • Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    • If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    from LKN 1935.
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten.
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check.
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About../More..
    under Firewire.. what do you read..?
    More
    • FileVault - Secure that it’s turned off
    • Network storage - DOESN’T WORK
    • Where did You store/capture/import Your project ?
    External USB hard disk = Bad Choise / FireWire = Good
    If so it has to be Mac OS Extended formatted
    ----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
    mbolander
    Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
    I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
    *No Camera or bad import*
    • USB hard disk
    • Network storage
    • File Vault is on
    jiggaman15dg wrote
    if you have adobe cs3 or 4 and have the adobe bridge on close that
    or no firewire will work
    see if that halps
    DJ1249 wrote
    The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
    MaryBoog wrote
    Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
    //support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odwenGB&sec=DVH&m=HDR-HC7E
    What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
    Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
    Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
    Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
    This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
    Yours Bengt W

  • Sony DCR SR52E compatable???

    I'm about to upgrade from my pc to a new iMac (as soon as Leopard O/S is released). I also have a Sony DCR SR52E HDD Handycam - Are they compatable?
    I undertand there were issues but I expected the 'o8 software releases had addressed these issues, or may Leopard O/S? If not, is there a way round that is not too time consuming and complicated?

    I've read the specs of your device on the Sony site.. a 'classic', SD, HDD camcorder...
    http://docs.info.apple.com/article.html?artnum=306171
    lists its successor models, so I give it a very high chance, iM08 does support it out of the box ...
    iMHD≤6 does not support HDDcorders, for usage with the older versions of iM, you need 3rd party apps, as well-known Mpeg Streamclip (free) plus the mp2-playback-component (apple.com, 20$) ...
    usually, Sony + Apple work 101% together.. (Sony built the first Apple Laptops )
    and, no, your device doesn't use/need AVCHD codec... don't care about that ...

  • Final Cut Studio 2.x Sony DCR-TRV900 Compatibility

    My Sony DCR-TRV900 camera is not listed in the FCS 2.x compatible devices list. Any one know what this means exactly? Apple techs just say "it's not compatible" without further explanation. I upgraded to the Mac Pro/FCS from Adobe Premiere Pro running on my PC expecting increases in quality and now my film quality has gone south with grainy editing footage etc.
    Thx
    DBL

    DBLewis wrote:
    My Sony DCR-TRV900 camera is not listed in the FCS 2.x compatible devices list. Any one know what this means exactly?
    As long as you have an IEEE 1394 (FireWire/iLink) connection (which you do) then you should be fine. The support issue may have to do with device controllability (in Log and Capture, play/scrub/etc the camera from the FCP control interface).
    If Final Cut cannot control your device for whatever reason, there is the simple workaround of using the +Non-Controllable Device+ preset under the Capture Settings tab.
    For more info, refer to page 287 of the FCP user manual.

  • Sony DCR-TRV70 Compatibility with IMovie HD

    When I bought the Sony DV camcorder it was on the comaptible list from Apple. It is not now. With the supplied USB cable my Imac / IMovie HD does not recognize the camera. Has anyone had luck connecting this camcorder to Imovie HD?

    You need to buy a Firewire cable, 4-pin to 6-pin. Sony calls them i.Link. USB is just for stills.

  • Is a Sony DCR-TRV900 compatable with iMovie 8?

    Does anyone use a DCR-TRV900 (old, but good) video camera with iMovie8?

    Bengt Wärleby wrote:
    .. Asymetrical - Yes but not enough. Did it => Expensive repair to Camera.
    .. you Swedish Vikings are too strong, .. your hands are not made for tiny Japanese products
    SCNR!!

  • Sony DCR-SR80 Compatability

    Anyone know of any way I can get my new sony handycam to work with my imac without needing to purchase the Capty software? Thanks

    Hi Kurt,
    iM/iDVD are made to work with firewire connected miniDV camcorders... you miss a lot of simplicity&convenience using this apps outside its concept...-
    saying that: the codec for video editing (consumer level...) is .dv
    I'm not familiar with your device nor Capty, but what I've heard so far, it supports your device to transfer the recordings to your Mac and it allows a conversion... choose "dv" as export; you can import/drag'n drop this files into iM...
    don't get surprised: due to standards, a dv is much bigger then its mpeg.
    codecs:
    mpeg is by definition a playback/delivery format (e.g., it tricks your eyes, because it doesn't store every frame of your 30fps video...)
    "editing" mpeg is an extremely tricky task, mpeg stores video in "blocks"/GroupsOfPictures. any "changing" inside this GOP results in a disorder of the mpeg-structure.. do some wiki... you can spend hours about that topic..
    dv has 13GB/h, because it is meant for editing... (e.g. it DOES store every frame of the 30fps)
    you will soon get the advice from other participants of this discussion :
    get the camera back, buy a miniDV...

  • Device Compatibility - Sony DCR TRV 355e

    Does anyone know if the Sony DCR TRV 355e is compatible with Final Cut Pro. A client has shot footage on this camera that he wants us to use but we don't have a Hi8 camera or deck so we are going to have to use his camera and connect via firewire. The only problem is it is not listed on the Apple device support page - http://www.apple.com/finalcutstudio/resources/devicelist.php
    Has anyone used this camera before or know if it can connect to final cut before we invite him in on a wasted journey?

    The other thing I suggest...
    Hi8 was a 'slippery' format to bring in digitally. I always had sync issues if I captured the whole tape.
    This gets to be a pain... but if you want to stay free of sync issues capture 15 minutes max each pass.
    Anything over that and you'll get slight audio drift that by 15 minutes starts to become noticable and by 1 hour is off by as much as a second or more!!
    If you need to overlap some sections make sure you get some pre-roll.
    It will work... just a pain.
    Good luck,
    CaptM

  • Sony DCR-HC48 Mini DV compatibility

    http://www.apple.com/macosx/upgrade/camcorders.html seems to be outdated. I want to know if the Sony DCR-HC48 Mini DV is imovie/finalcut compatible.
    Omar
    Macbook Pro   Mac OS X (10.4.9)  

    yes, camera IS compatible...
    don't forget to buy a 4/6pin firewire cable at any PC shop..
    or, spend 5x the price for same cable, from Sony, called 'iLink' cable.. ;))

  • Compatability of Sony DCR-SR45

    Hi to all,
    I'm wondering if anyone knows whether the Sony DCR-SR45 is compatible with FCE-HD? I want to buy a hard drive-based recorder....but don't have too much cash to spend. Will this camera work? Have any other recommendations for inexpensive, but good options?
    Thanks in advance,
    Sharks Fan

    The only cameras that work directly with FCE 4 are TAPE based DV and HDV cameras plus any camera shooting AVCHD.
    All other cameras will have to have their video converted to one of the above formats.

  • FCE compatability with SONY DCR-HC28

    Hi - I recently bought a SONY DCR-HC28 to download a lot of footage into a project, but
    Final Cut Express doesn't recognise it. Has anyone got these 2 working together ? Any tips ?
    Thank you
    James

    No - I've used Final Cut a lot before, without this problem.
    I bought FCE recently, and this is my 1st experience with it -
    without managing to connect any camera to it.
    I'm hooking a firewire cable to the computer, making sure the computer is restarted, switching the camera mode to play/edit, going through the
    'easy setup' sequence: NTSC Firewire Basic (as well as the other NTSC
    permutations), then capture - no good, then view - refresh A/V devices....
    still nothing...........
    will try the 2 suggestions you made. Thanks a lot.

  • Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the ca

    Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the camera the port out is to use a USB data cable to a laptop for my macbookpro can not read the contents of the file and the camera. I also want to use the lens on the camera as a substitute for the embedded camera on my macbookpro, what should I do to replace the embedded camera on macbookpro with sony camera so that the camera could be more variety and can I record when I turned macbookpro . Please help for this so that I can quickly capture the results from sony camera to my macbookpro. Thank you.

    See this page http://macosx.com/forums/networking-compatibility/296947-sony-camcorder-my-mac.h tml - might be some helpful tips there.
    Clinton

  • Does apple have update to idvd so I can use Sony dcr-sx44 camcorder

    Does apple have an update to idvd so I can use sony dcr-sx44 camcorder?

    If you already have iDVD then run Software Update, if there are any updates available for iDVD they will be posted. While that doesn't answer your question directly it is your best option. Looking at the software specifications for the camera it doesn't look like it was ever intended to work with OS X. This is what I found on Sony's website:
    Software
    Supplied Software : PMB Ver.5.0 Supports Windows XP Service Pack3 (SP3)(32bit), Windows Vista Service Pack2 (SP2) (32bit), Windows 7, 64-bit editions and Starter (Edition) are not supported. Not supported by Mac OS.
    Operating System Compatibility : "Windows XP SP3 * /Windows Vista SP2 ** /Windows7 * 64-bit editions and Starter (Edition) are not supported.The Windows Image Mastering API(IMAPI)Ver.2.0 or later is required to use the function for creating discs. ** Starter (Edition) are not supported. Standard installation is required. Operation is not assured if the above OS has been upgraded or in a multi-boot environment. "
    I suspect a camera upgrade may be what you need to do.

  • OS X does not see my Sony DCR-PC110 video camera?

    I just got the new all in one 27" MAC and could not wait to start editing my videos. Then a problem, I hook up my Sony DCR-PC110 with fire wire and nothing happens. The camera does not show up in the system at all, and of course Final Cut Express 4.0 show "No Comunication" instead of "VTR OK".
    Is this camera no longer supported?
    Is there anything I can try to get it to work?
    Last but not least, if there is a compatability problem how can I get my collection of the kids video from the digital tape into Final Cut Express?
    Thanks in advance for any guidance on this.

    Hi
    As I see it - it should work.
    See my list (most should apply)
    *NO CAMERA or A/D-box*
    Cable
    • Sure that You use the FireWire - USB will not work for miniDV tape Cameras
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
    • Test another FW-Cable very often the problem maker.
    Camera
    • Test Your Camera on another Mac so that DV-in still works OK
    • Toogle in iMovie pref. Play-back via Camera (on<->off some times)
    • Some Cameras has a Menu where You must select DV-out to get it to work
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK eg recording and playback to TV)
    Connections
    • Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
    Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
    the Movie project to dedicated external hard disk.
    Mac
    • Free space on internal (start-up) hard disk ? Please specify the amount of free space.
    (Other hard disks don't count)
    I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
    after material is imported and edited.
    SoftWare
    • Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
    • Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
    • FileVault is off ? (hopefully)
    Using WHAT versions ? .
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie 8 (7.1.?) ?
    • iMovie HD 6 (6.0.4/3) ?
    *Other ways to import Your miniDV tape*
    • Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    • If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    from LKN 1935.
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten.
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check.
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About../More..
    under Firewire.. what do you read..?
    More
    • FileVault - Secure that it’s turned off
    • Network storage - DOESN’T WORK
    • Where did You store/capture/import Your project ?
    External USB hard disk = Bad Choise / FireWire = Good
    If so it has to be Mac OS Extended formatted
    ----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
    mbolander
    Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
    I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
    *No Camera or bad import*
    • USB hard disk
    • Network storage
    • File Vault is on
    jiggaman15dg wrote
    if you have adobe cs3 or 4 and have the adobe bridge on close that
    or no firewire will work
    see if that halps
    DJ1249 wrote
    The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
    Yours Bengt W

  • Sony DCR-TRV19 Compatible w/ FCP?

    Hello,
    Is a Sony DCR-TRV19 mini DV Camera compatible with FCP5?
    I've gone through the compatibility lists on this site and can't find this camera listed anywhere.
    Any help would be much appreciated.
    Thanks!
    Marc Griffin

    It should be OK. It's got an i.Link connector,
    which you can use with a 4-pin-to-6-pin Firewire cable
    and plug into your computer's Firewire 400 connector.
    In FCP, choose the standard DV-NTSC setting with Firewire device control.

Maybe you are looking for