IPad sound is gone, when not using earphones

Hello,
I know there are similar posts as this one, but none have worked for me and there is a little piece that is a bit different here. I have an iPad 1
When earphones are in there is no issue, all works fine.
There is no sound
The button on the slider for the volume is gone
If an app is running when the iPad is sleeping, the moment I turn it on I can hear the music or backtround sounds for about one second and then there is nothing.
Thank you

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can’t hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
 Cheers, Tom

Similar Messages

My ipad disconnect to wifi when not using for a while

My ipad disconnect to wifi when not using for a while. is that normal?

This is absolutely normal, the iPad is turning off after a certain time to conserve energy…
If you are making large downloads, go to the "Settings", "General", "Auto-Lock" and set it to a higher value…
enjoy your magic machine

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

How do I turn off background ni file activity when not using Labview? files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, nicitdl5.exe

How do I turn off background ni file activity when not using Labview? I use labview rarely, and I also use my computer for demanding multimedia applications, including multitrack digital audio recording. I need to reduce as much background activity as possible, and taking a look with task manager I see files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, and nicitdl5.exe running even when I haven't used Labview (8 I believe). These files run even after I right click the NI icon on the lower right and turn off the application. I would like the computer to boot up without these files, and for the necessary files to be activated only when I start the program.
Can this be done or do I have to remove labview from the system to improve performance?
Thanks

Hello, those processes are part of running NI services that start when Windows boots. These processes serve varied purposes and stopping them can have undefined and unknown consiquences for your NI products. These products run at "normal" priority meaning that they should be preempted by any process running at a higher priority which I would expect your other application to be doing given their time sensitivity. That being said, in Windows XP (I can't speak for other OSes), you can lower their priorities even greater through task manager (right click the process»set priority) to further remove them from contention for resources. If you want to prevent them from running you can set the service startup type to "manual" in Control Panel»Administrative Tools»Services. Right click the process go to Properties and Under the General tab choose Startup Type»Manual. This will start up the processes only when something directly starts it up. LabVIEW will start these processes up as it attempts to use them. When you shut down LabVIEW you will need to manually shut down these processes through task manager. Again, doing this can cause problems with your NI products on your system and it is not advised.
Travis M
LabVIEW R&D
National Instruments

Hi i have an ipad mini and i have not used it for 2 month or more. Today i have tried to use it i came across with a problem. my Ipad is blocked and it asks me to wait 23,401,418 :) what should i do need your help. thanks

hi i have an ipad mini and i have not used it for 2 month or more. Today i have tried to use it i came across with a problem. my Ipad is blocked and it asks me to wait 23,401,418 what should i do need your help. thanks

Have you charged ipad Try a Reboot press & hold power button & menu button hold both down until you see Apple Logo You may need to do this more than once. Bsydd uk

Is there any way to turn off airport without removing the electrical plug and should I unplug it when not using it??

I just got the 5G Airport Extreme base station. Set-up was a snap! Maybe 10-15 minutes compared to a friend who got another name brand for his pc and took a couple hours, even having to call customer support! Been working great so far, but am concerned about never turning it off, not only about the possibe harm that could be done to the unit, but also about having an active, open Internet connection 24/7. Before I got my Airport Extreme I was using Ethernet cable with a cable modem that could be placed on "standby" whenever I was not using my Mac for Internet, but since AE5G doesn't have a power switch on the unit, have left it turned on rather than unplugging it by the electrical cord. I did turn AirPort "off" in the menu bar when not using it wth my Mac, but AE is still apparently constantly active, showing a steady green light. Would there be any harm done by plugging it in only when I want to use Wi-Fi, then unplugging it?
Thanks for the help!

Would there be any harm done by plugging it in only when I want to use Wi-Fi, then unplugging it?
That is a matter of debate, since there are two schools of thought regarding power status on a router.
One school maintains that you can turn the device on and off as needed. Makes sense for some folks. The advantage of this is that it might save a bit of electricity, although the Extreme draws very little power most of the time.
Another school believes that there is a reason why Apple did not even place an "Off" switch on the device. It's designed to run 24/7.
Leaving the Extreme on will place far less stress on the electrical components in the device since they stay in an "idle" state most of the time, drawing very little current. Powering any electrical device up sends a sudden rush of current through the device, which places far more stress on a device than if it is simply left on.
It depends on your priorities. If you want to save electricity, your decision is already made. If you intend to prolong the life of the router, then consider leaving it on, as Apple intended.
A compromise position might be to leave the Extreme on most of the time and power if off for long weekends or vacation periods when you will be away. Remember that the Extreme must establish all new network connections every time that it powers back up....perhaps another reason to simply leave it on.

My ipad 3 gets hot when i use it. i've read an article in wikipedia that apple will replace ipad3 to ipad 4. is it true? im from laoag city, ilocos norte, philippines.

my ipad 3 gets hot when i use it. i've read an article in wikipedia that apple will replace ipad3 to ipad 4. is it true? im from laoag city, ilocos norte, philippines.

Hello:
my ipad 3 gets hot when i use it.
Contact Applcare with a warranty issue.
Barry

Can I use an iPad for taking hand written notes using a stylus? Not a large stylus, but a one like Sumsungs.

Can I use an iPad for taking hand written notes using a stylus? Not a large stylus, but a one like Sumsungs.

Hi HawkeyeD1977, thank you for watching!
1) I don't think you can really scratch the screen with the Jot Script. I don't have a screen protector, but I have reasons to think it will still work if you have one (I tried the Scrip through a think sheet of plastic, and I still works: more on that in my next video).
2) It's true that the Script is noisy, but as I often say: have you ever tried to focus on the background noise of, say, a classroom? It is very noisy too! I'm always surprised by how good our brain is to filter background noises. So really, it depends on your environment and on the ability of your brain to filter noise. For me, I'd rather use a stylus that is a little noisy but very precise. It also depends on how you write text: as you can see on my video, I don't lift my pen very often, I write big groups of letters together.
3) You should watch my latest video about that: I talk about Memo and Notes Plus. Memo has a handwriting technology that you can test for free, and buy as an in-app purchase inside Notes Plus, to use in a realy note-taking app. In Notes Plus, you can indeed convert just selected areas containing text.
4) It won't have a text convertor, not in the next update. Maybe latter!
If you want more information about the Jot Script, stay tuned: by the end of the week, I will have uploaded a video to talk about the Scrip with more hindsight after one month.

Validation messages in JSF (when not using ADF faces)

I've spent some time with JDeveloper 11 and would like to use it on an upcoming project. I have to target IE 6, so I won't be able to take advantage of ADF Faces. Instead I'd like to use the ADF Business Components with a standard JSF interface so it can be used by people still running IE 6.
I've created a Business Component from a database table and can bind a JSF HTML Creation Form by dragging the appropriate view from the AppModule in the Data Controls pane. However, when I attempt to submit the page without all the fields being valid I get the following validation error message:
j_id__ctru2:j_id__ctru6: Validation Error: Value is required. j_id__ctru2:j_id__ctru6: Validation Error: Value is required.
I've tried making this more descriptive, but editing the error message in the Validation Rules section of the Business Component has no effect. What's the best way to convey a meaningful validation message to the user when not using ADF Faces?
Also - I'm still very new to JDeveloper. Since I won't be able to rely on my users having Internet Explorer 7, would you recommend I stay with JDeveloper 10? The examples and documentation I've seen so far for JDeveloper 11 appear heavily biased towards using ADF Faces so I'm starting to wonder how much support is there for using plain old JSF.
Thanks for your time!

Hi,
if you are completely new to this then I suggest to use JDeveloper 10.1.3 and ADF Faces in there. Its good to use with IE6 as well. Currently we do have more tutorials available for this release than for 11, which for this reason is a better choice for someone new to this
Frank

How can you sync ipad 2 photos to pc not using the cable or icloud sync?

How can you sync ipad 2 photos to pc not using the cable or icloud sync? Is there a way to do this via wi-fi network, How can you sync ipad 2 photos to pc not using the cable or icloud sync? Is there a way to do this via wi-fi network

Thanks for that, that was my first suggestion but he wants to not email either. His problem is he used his old nokia to do it and it was fine, now anything other than that he thinks is too much hassle.

X61 Hang when not using AC adapter

X61 will hang (on the login page, sometimes when using the laptop halfway), when not using AC adapter.I've format the system, install drivers (system update) and application.
anyone encounter this issue?

I notice if I disable Atmel TPM (from Device Manager), the system works normal when not connect to AC adapter.
I did not have most of the Lenovo software installed. Only have System Update, Fingerprint software & Power Manager.
Will there be any issue if I disable the Atmel TPM ?

When not using EJBs can I make BD a Singleton and cache facade instances?

Hi,
In an application which does not use EJBs can I make BD(Business Delegate) a singleton?
I was very sure about doing this but when I tried Google on the same subject the answers were'nt supportive of this but that was in the context of applications which used EJBs. And also item 4 in Effective Java isnt very supportive of caching Objects at the drop of a hat.
When not using EJBs would it be an unnecessary thing to make BD a singleton and cahce Facade instances in a BD and DAO instances in a Facade? I am planning to use a array based blocking bounded buffer for the purposes of caching. Or would it be better to make both BD and a facade as SIngletons and just cache DAOs in a Facade?
Any suggestion would be of good help to me.
Thanks a lot.

Not sure I understand all your design, but you seem
to describe an architecture where requests are queued
and handled serially.Sorry if I messed up while explaining it. No, it will not be handled serially. Since the BD is a singleton multiple threads can pass messages to it simulteanously, a bit like an object of the Action class in Struts. Since I dont see having any synchronized methods in a BD requests will be handled simulteanously.
The impact on throughput of handling requests
serially (as opposed to parallelizing them) probably
outweights by far the cost of instantiating one more
object per request...Yes, I understand that but as I explained above the reqests wont be handled serially.
To be more clear, I am thinking of using any one of these two things:
1) BD(Singleton)-->Facade(Singleton, caches DAOs in a thread safe data structure)
2)1) BD(Singleton, caches Facade instances in a thread safe data structure)-->Facade(caches DAOs in a thread safe data structure).
the thread safe data structure I am planning to have is a array based bounded buffer which blocks using wait and notify mechanism.
Thank you for the reply.

Should I disable wi-fi when not using it ? Will this preserve the Battery?

When I`m at home,should I disable the wi-fi when not using the internet ? Does this preserve the battery?

http://ipod.about.com/od/iphone3g/tp/iphone-battery-life.htm
#5 on the list to preserve battery:
Keep Wi-Fi Off
The other kind of high-speed network that the iPhone can connect to is Wi-Fi. Wi-Fi is even faster than 3G, though it’s only available where there’s a hotspot (not virtually everywhere like 3G). Keeping Wi-Fi turned on at all times in hopes that an open hotspot will appear is a sure way to drain your battery life. So, unless you’re using it right this second, keep Wi-Fi turned off.
Find it in Settings -> WiFi -> Slide to Off

Hi, I have an iPhone 4 which rings people when it is locked, whether or not in my pocket. I always lock it when not using it. Can anyone help? It is calling random numbers, not the last person or anyone even recently called on my recents list. Thanks

Hi, I have an iPhone 4 which rings people when it is locked, whether or not in my pocket. I always lock it when not using it. Can anyone help? It is calling random numbers, not the last person or anyone even recently called on my recents list. Thanks

Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

Ive just subscribed to itunes match. do i need internet access to play tunes when not using my home broadband?

ive just subscribed to itunes match. do i need internet access to play tunes when not using my home broadband?

On an iOS device yes unless you pre-download the music. On your computer no, unless you decide to delete the tracks from your iTunes library. The latter is not recommended without having a full backup of your muaic files.

IPad sound is gone, when not using earphones

Similar Messages

Maybe you are looking for