IPad sound using car speakers

I am able to hear iPod music and movies that I have downloaded to Ipad but can't hear pandora or netflix,
Is this software blocked or are there settings that I have to set on the iPad?
Thank you for helping me with this one, great machine!

fredericlang wrote:
john.grayson wrote:
fredericlang wrote:
When I plug my iphone to the aux of my radio, the voice control screen comes on (???) and makes it renders the phone unusable...
mine does that too (very strange) but i just hit the home button which takes me back to the home screen.
You are right, but for some reason the Voice control screen comes back after a few seconds.
Another issue is that when connected to the Aux of my radio I loose the microphone on the iphone...
How did you work out this problem?
i don't have that problem of losing the microphone when the iphone is connected to the aux in the radio. when i attach my iphone to the aux (through the headphone jack) the voice control screen pops up, i hit the home button and continue to use the iphone as i normally would.

Similar Messages

No sound using internal speakers, but I have sound using headphones

I just finished installing archlinux with GNOME3 on a laptop, everything were perfect until I detected a problem: I only have sound using headphones, the internal speakers of the computer doesn't work. I followed the official wiki step by step and I never had this problem using other linux distributions.
Any idea?

I'm having the very same issue. Each time I boot computer I have to unmute the speaker in order to have sound. Only the headphones are unmuted by default. From what I understand alsa-store and alsa-restore are supposed to run automatically on boot and shutdown only (normally they appear in inactive/dead state).
I have tried to run 'alsactl store', but this won't help.
The whole thing start happening only recently (late December). I have arch on this laptop for over 3 years and it was fine as far as I remember.
EDIT:
I have just found that this issue is due to pulseaudio 2.1 -> 3.0 upgrade. After downgrading to 2.1 it works as expected.
EDIT2:
Maybe you will find that useful, a temporary "fix". I have added to startup applications (in my case in gnome-session-properties):
amixer -c 0 sset Speaker Playback 95%
which just simply sets the speaker volume to 95% each time I log in.
Last edited by kmiernik (2013-01-14 12:17:57)

Help - Crackled sound using the speakers for the first time after wake up?!

I've a new white MacBook since Monday.
The problem is:
After turning on oder waking up the notebook, I want to play a sound or music. The first time the speakers are used, the sound is very weak and crackled, but after two seconds or so it's ok again.
The same happens if the first sound is the emptying-sound of the trash or every other sound.
This happens every time I start the computer.
Has anyone the same problem?
Thank you in advance!
Greetings form Switzerland
Message was edited by: Dominik Huber

Many people have experienced this, usually when using auxiliary speakers. It happens with my desktop on booting. It's very normal.
You might find this workaround useful and effective:
https://bugs.launchpad.net/ubuntu/source/linux-source-2.6.20/bug/75906

Using car speakers for phone calls?

iPhone 3GS.
Is there some kind of device that would let you use the car speakers to listen to phone conversations?
If so which one would you recommend?
I can't use a bluetooth headset and the iphone speaker is not load enough for me.
Thanks
F

fredericlang wrote:
john.grayson wrote:
fredericlang wrote:
When I plug my iphone to the aux of my radio, the voice control screen comes on (???) and makes it renders the phone unusable...
mine does that too (very strange) but i just hit the home button which takes me back to the home screen.
You are right, but for some reason the Voice control screen comes back after a few seconds.
Another issue is that when connected to the Aux of my radio I loose the microphone on the iphone...
How did you work out this problem?
i don't have that problem of losing the microphone when the iphone is connected to the aux in the radio. when i attach my iphone to the aux (through the headphone jack) the voice control screen pops up, i hit the home button and continue to use the iphone as i normally would.

Thumping Sound thru Car Speakers

I am getting a thumping sound when I connect my Itouch 2G to my car stereo jack (3.5mm) This doesn't hAppen when I connect earphones. I can sometimes get it to go away but it's not because of jiggling or turning the connection. No rhyme or rreason why it abates. No consistent time-line for when it stops. Will start again if I disconnect cable and then re-connect.
Anyone have any ideas?
Thanks!!!

I reported this same problem last Oct. Still no response or resolution. I hoped the new software would eliminate the problem, but no such luck. Now my album artwork is wrong on the touch, but shows correct on my MBP. Would REALLY appreciate answer on how to get rid of this ANNOYING thumping sound! Have itouch 2G.
Thanks much!!

Want to use bluetooth speakers with volume control, don't want the iPad internal speaker sound, is this possible?

want to use bluetooth speakers with volume control, don't want the sound at the iPad internal speakers, only on the external speakers. is the possible? and how

You can't downgrade the iOS.
Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

My iPad 2 speakers won't work anymore and neither do my headphones. The sound used to come out of my speaker scratchy, but now I have zero sound either way. Please help me.

So my speakers and my headphones don't work. Neither give out sound. I had a crackle in the sound from the speakers about three weeks ago and the headphones worked. Now maybe a week or two ago I have lost all sound. Please help

You may have dust or a small object in your headphone jack. You can purchase cans of air from computing stores that can clear any dust that may be causing the problem. If that doesn't work then a larger object may have damaged part of the jack at which point it would be advised to visit your local Genius Bar and see what repairs they can offer. Try not to insert any other objects especially ones with sharp edges into the jack as this often creates further damage. Hope everything is working again soon.

I want my iPad to play over my car speakers I do not want a frequency transmitter device. Do I have any alternatives. I am not sure about adapters.

I want my iPad to play over my car speakers I do not want a frequency transmitter device. Do I have any alternatives. I am not sure about adapters.

I second what Thoma said. If there is the little headphone in, then you can buy a cord to plug the headphone out of your ipad into the input in your car.
Failing that, see if you can pair via blue tooth.
Or the fallback is an FM transmitter. I've used one of these for years. In fact, the one i use was meant to go with a MP3 player that broke years ago. They're very simple. the transmitter sends the music out of your ipad 'out' on a specified frequency (due to radio stations these transmitters often have many frequencies to choose from) you then tune y our radio to that specific frequency and you hear your ipad.
Occasionally, if you're driving cross country, you may need to tweak the frequency (if you get within range of an existing station using that same frequency) but they're very easy to use.
I often take motorpool cars, so I just carry with me the transmitter and a 1/8-1/8 cord and I'm set for any situation i find myself in

I purchased an itrip Auto Pilot and require an app to use it according to my device I was setting up to play music in my car speakers. I cannot find an app for this in the itunes store. Help

I purchased an ITrip Auto Pilot and when attempting to use it to play music from my Iphone through my car speakers, I was promptedd to get an app from the itunes store to enable it to work. I went to the itunes store and searched for an app and could not find one. Can anyone tell me the app I need and where to get it for this itrip auto pilot made by Griffin? It is supposedd to enable my iphone and ipod to play on my FM radio in my car.

You should go to the web site for the iTrip product and see what app it is, I'll bet there's a link there that will take you right to the app. Don't worry, as you get more stuff it'll be easier to figure it all out, eventually it'll be plain old common sense that solves these types of issues for you

Using external speakers with iPad

Hey, I have the cool imac ball speakers, these:
http://www.vectronicsappleworld.com/collection/articlepics/g4imac/snap45.jpg
But the plug on the speakers is a little to small. Is there an adapter that I can get that will allow me to use these speakers?
thanks,
Jeff

Be careful - I think I owned a set of those Apple speakers at one time, and IIRC they weren't just normal speakers, hence the special plug. You could conceivably damage the iPad or whatever else you plug them into, if I'm remembering this right.
Edit: Do a Google or whatever search for "Apple Pro Speakers" and you'll find various articles on compatibility, hacking them for a PC, etc.
Message was edited by: Doug Eldred

My IPad sound keeps turning off. I have checked all the settings nd they are ok. I have to reset it all the time. It is very frustrating as I use it as an alarm, need I say I've waken late a few times.

My IPad sound keeps turning off. I have checked all the settings nd they are ok. I have to reset it all the time. It is very frustrating as I use it as an alarm, need I say I've waken late a few times.

I'm having the same problem?

About iPad iOS 4.2 beta Airplay can't use multiple speakers?

About iPad airplay can't use multiple speakers?
My iPad use the latest ios4.2 beta1 ,there is 3 airport express in my house.
In iOS 3.2 I can use the App "Remote" to control 3 speakers perfectly,but "Remote" even can install in ios4.2 ,not use smoothly.
After I upgrade iOS to 4.2, I can use Airplay to control each speaker without "Remote",but can't use multiple speakers at the same time. Is anyone like me?
Is there have any other solution can fix this problem?
Thanks!

I completely agree with Tamara, if you are running iOS 4.2, then you should also realize that there are two aveanues for you to get questions answered
1) the developer forums (there is a specific forum area for 4.2 questions, marked in a big red banner across the top saying something about confidentiality.)
2) The bug reporting tool available to developers, noted at the top of the iOS 4.2 forum page. When you go there read the format intructions linked to at the top of the form to ensure you put it in the format that is required for formal developer bug reports.
Jason

Looking for wireless speakers for iPad, would like the speakers to be used plugged in to AC as well as battery. Any recommendations?

looking for wireless/Bluetooth speakers for use with iPad, would like these speakers to run on AC as well as battery. Any recommendations?

My experience with steaming with Apple products is done from iTunes, my music and video files from iTunes on my iMac or video from Apple Store. I sync photos and music from iTunes with iPhone, iPod Touch and AppleTV.
I have a 2TB external disk that has my iTunes library on it. All my music, TV and movies. It is hosted on my iMac
I do not know if mkv video can be played on the iPad, maybe there is an app that can do it. According to the iPad specifications the video files have to be "Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4 and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4 and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format"

No sound from internal speakers or headphones when using ART Tube interface

Hi - can anyone help with this...
I have no sound fromthe internal speakers or headphones when using my new ART Tube USB interface - I get a nice loud recording level from the ART but cant monitor - in Logic 7.2
Audio hardware interface in logic 7.2 is set to USB Codec - just like the ART manual states
And the SOUND control panel is set to speakers/headphones
But no love...
Any comments welcomed
Si2

By default, OSX will only let you have one interface active at any one time - so if you specify the ART as your interface to get sound in, you don't have access to your regular interface to listen to it.
But there is a workaround - open the Audio/MIDI Setup utility, create a new "Aggregate Device", and add both your required audio interfaces to it.
Now, back in Logic, select the aggregate device you created as the audio device, and now all your inputs and outputs from both interfaces are available - the aggregate device acts as one big interface containing both your hardware interfaces.

No sound from internal speakers after using audacity 2.02?

No sound from internal speakers after using Audacity 2.02 ?

Hey iberlin12,
I would check out the article containing recommended troubleshooting steps for when you don't hear audio from a Mac's built-in speakers:
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/TS1574
Best,
Delgadoh

IPad sound using car speakers

Similar Messages

Maybe you are looking for