IPad speaker sounds blown after update

Speakers sound blown after update. Help

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Similar Messages

Ipad 3 speaker blown after updating

Ipad 3 speaker blown after updating

"Blown" would have a specific meaning here, i.e., you've overdriven it and it no longer works properly. As it's hard to see what an update might have to do with that, do you really mean that it just isn't working?
If so, have you tried anything at all so far before you posted up this minimalist 'sort of a question'?

First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

Restore iPad to Factory Default; do not restore from backup. It may be the cause of the problem.
Settings>General>Reset>Erase all content and settings

Both iPod and iPad won't connect after update.

Both iPod and iPad won't connect after update. iTunes says "can't allocate a resource"

I had the same problem after updating to iOS 7 today. I did follow the advice on another site, but additionally rebooted my iMac. Worked after that.
Follow these steps to reset the Lockdown folder:
Disconnect all iOS devices from your computer and quit iTunes.
From the Finder, choose Go > Go to folder.
Type the following and then press Return:
/var/db/lockdown.
The Finder window should display one or more files with long alphanumeric file names.
In the Finder, choose Edit > Select all. Then, choose File > Move to Trash. Enter an administrator password if prompted.
Note: Do not delete the Lockdown folder itself. Delete only the files contained inside the Lockdown folder.
Reconnect your iOS device and open iTunes
My Additional step: reboot the Mac. Your iPad should give the first indication that it has worked by asking you to "trust this computer" or some such. Agree. Then iTunes should have reopened with your iPad showing and syncing.

Any ideas? In the history may iPad never crashed but after updating to iOS 5 it crashed every 30 minutes, and browsing is very slow

Any ideas? In the history may iPad never crashed but after updating to iOS 5 it crashed every 30 minutes, and browsing is very slowAny ideas? In the history may iPad never crashed but after updating to iOS 5 it crashed every 30 minutes, and browsing is very slow

I found the reason why our iPads are slow after iOS 5!!!!!!!
What you need to do is this:
1) launch settings, go to mail contacts and calendars, go to fetch new data, advanced, and set iCloud to fetch.
2) go back and set an interval of when to fetch. Mine is set for thirty minutes.
3) make sure on top push is still on, that means that all your emails will still be pushed, but all the iCloud sync (contacts, calendars, reminders, bookmarks) will happen at the interval you choose.
Restart the device. Your performance should be 10x faster! No more keyboard lag, nothing! Doing this puts less stress on the A4 chip, which we know we need every bit we can get with it now!!!
Optional:
1) in the settings, go to safari.
2) clear all history and cookies/data
3) enable private browsing. One of the biggest reasons why devices are slow is because it keeps all the history and cookies in the RAM. You need more RAM to make things faster. By turning on private browsing, it never records it!

IPad 2 problem. After updating to IOS 8.0.2 iPad says that I need to plug into iTunes. When I do that, the only option is to restore iPad to factory settings? iPad will do nothing until then. I have never had this problem before. Help

iPad 2 problem. After updating to IOS 8.0.2 iPad says that I need to plug into iTunes. When I do that, the only option is to restore iPad to factory settings? iPad will do nothing until then. I have never had this problem before. Help

Hi ..
Follow Apple's instructions for recovery mode here > iOS: Unable to update or restore
You can restore from a backup.

Unable to tether my iPad to my iPhone after updating both devices to ISO 7.1 both devices worked prior to the update

unable to tether my iPad to my iPhone after updating both devices to ISO 7.1 both devices worked prior to the update

For dial up connections axmung other things. I have not been successful with the Bluetooth (pairng )

The front camera of my iPad 3 doesnt work after updated ios7

The front camera of my iPad 3 doesnt work after updated ios7

Have you tried closing the Camera app completely and seeing if it works when you re-open the app ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
If neither fix it then you could try contacting Apple.

Ipad 2 wont restore after updating to ios 7

ipad 2 wont restore after updating to ios 7

Hello pinky03,
I would be be concerned too if I was not able to restore my iPad. If you have not resolved the issue, I recommend following the steps in this article for an issue like this:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Thank you for using Apple Support Communities.
Best,
Sheila M.

IPad 3 sound issues after iOS 8 upgrade

iOS sounds and some apps have very little or no volume after iOS 8 upgrade.

Hello mhael,
Thank you for participating in the Apple Support Communities.
If you experience popping sounds and distortion from your iPad Air speakers after updating iOS, start with the troubleshooting steps in this link:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
All the best,
Jeremy

Anyone else's iPhone 4s speaker not working after update to iOS 6.1?

My speaker does not work after updating the software to iOS 6.1. No sound for incoming calls or texts, no speakerphone, no siri, no music or any sounds played from apps. Headphones still work as does anything plugged into the headphone jack. I've check all my settings - everything is correct. I've rebooted and restored settings several times, I've docked it - nothing works.
Anyone else having this problem? Did anyone have this problem and were able to fix it? Does anyone know if Apple is aware and will be sending another update to fix it? I really don't think it's a hardware problem. Phone is in immaculate condition and never dropped or spilled on.

As stated...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere

Ipad won't start after updating to ios 8.1.3

My iPad was working without issue prior to updating to IOS 8.1.3 yesterday. After updating, not only would the ipad not start, it produced intermittent tones. The tone heard when device is plugged into an outlet for charging.
I attempted to turn the device off but it would not respond. Afterwards, a reboot was attempted numerous times by holding the home and sleep buttons down simultaneously. Once the Apple logo appeared the buttons were released, the logo disappeared but the device remained dormant.
While connected to iTunes and emitting the connection tones, periodically the splash screen would appear momentarily then turn off. I was able to swipe the screen on one of these occasions. The device worked properly until it was turned off after use at which time it would not turn on again and remains unable to turn on. It does not respond to attempts to turn it off or rebooting.
Prior to the update I did backup the device in case something like this would occur. Since I appear to have exhausted all my options to get the device to work, I feel the only remaining option is to restore it to factory default. I would appreciate advice from anyone who may either have experienced this same issue and found a resolution, or can provide thoughts on how I should proceed please.
If I proceed with a restore to factory default followed by a restore of the most recent backup, will I lose any data during this process? This will be my first time to erase a device so any thoughts would be greatly appreciated. I would, of course, prefer an alternative resolution. Thanks in advance for your help.
tony

Hello, Tony.
Thank you for visiting Apple Support Communities.
I understand that your iPad no long starts after an update and you have a backup for your iPad. It sounds like you will need to restore the device to factory and then will have the option to access your backup after the restore complete. The only information that should be missing would be after the backup was completed until the device is restored. I have included the steps for going through this process in the articles below.
If you can't update or restore your iPhone, iPad, or iPod touch
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes
-Jason H.

IPhone 5 update 6.1.3 speaker quit working after update

After update 6.1.3 on my iPhone 5 my speaker quit working. Did a restore still nothing. Headphones work just fine. No speaker phone or music.

Plugged into iTunes - told me to update to 6.1.3. Did its thing... and no sound from speaker. This happened immediately following the completion of the update - I didn't even pick up the phone. ***!
Headphone works fine, but I get zippo from the speaker except an occasional crackle.
Turned off BT, reset settings, plugged and unplugged the headphones (to see if the sensor was stuck), rebooted the phone, did a restore to factory, everything I could think of. Speaker is dead.
Don't perform this update - something's wrong.
Now I've got a useless piece of junk and I keep missing incoming calls. Nice job Apple!

Iphone 6 and ipad mini not charging after update to iOS 8.02

after updating iPhone 6 and iPad mini to iOS 8.02 neither of them will charge on my Bose Soundock Portable using a genuine Apple 30 pin to Lightning adapter however, my 5S running 8.0 still charges

Upgraded to 8.1 still not charging with official adapter however the one I bought from poundland works fine
the official adapter has been exchanged for a new one also

My iPad Won't Rotate after updating to iOS 6.

After updating to iOS 6, my iPad2 won't auto rotate. I already checked if the rotation was locked, so this isn't the case. I tried restarting it and rebooting it. The only possible way to rotate the screen is to turn off the iPad, rotate the iPad, then turn on the iPad again. Please help me, I don't know how to fix this problem.

I had same problem post upgrade to iOS 6.1.3
I went to
[Setting] [General] and set the
[Use_Side_Switch_To] option from [Rotation ...] to [Mute]
Checked switch by manually flipping the button on iPad cover (next to volume) back and forth and seeing images of mute actions appear sceen centre
But on checking further not all apps rotated automatically ... so ...
Manually closed all open apps by:
Screen button x2 in quick succession bottom bar appears with all active apps
Touch and hold on of these apps in this bar untill the x appears on them and the wobble
Close each one down by touching x
Then
Rebooted ( ... just like a Microsoft machine :-)
Now all working working ... boy you really miss that feature when its not functioning ...
Dont know if all steps relevant but this is what worked for me ...
... best of luck
Message was edited by: citizenpips

IPad speaker sounds blown after update

Similar Messages

Maybe you are looking for