IPAD Speakers not working properly after iOS 7 update

Hi all... After updating iOS 7 my iPAD speakers are producing an horrible noise whenever I listen to music and while using skype it's really intolerable.. Can anyone help me to get rid of this?? Even while hearing songs through headset its producing d same noise.

Quite frustrating
Sounds are either non existent, or sound like they're going through a distortion pedal.
Tried a hard reset, and will likely attempt a clean install/restore next...
Ugh... Apple...!!!
Ipad 2, iOS 7.0.2

Similar Messages

Anyone know how to fix Bluetooth headset not working properly after iOS 8 update?

I have an iPhone 5S and I use a Plantronics PLT M20 model bluetooth headset. I am no longer able to answer calls by pressing the button on the headset, since updating to iOS 8. I also also cannot end calls by pressing the button on the headset. This only happened after iOS 8. The Apple Care rep stated that "this is most likely a problem with the bluetooth manufacturer and they need to update their firmware, so now it's just a waiting game until they do that". Is that correct? Anyone encountering this?
Related information....
Hi - I'm a student with disabilities and rely heavily on accessibility features that make my life easier. For example, I use a Bluetooth headset to trying answer phone calls and use Siri… I especially use the "Raise to speak" option for accessing Siri. Since updating my iPhone five us and my iPad air, I've been scrambling to access the "raise to speak" option for Siri without success. When I called AppleCare, the representative stated I should have that option to enable in my settings. When I explained to her that the option is not showing, she wanted me to reset my phone to factory settings. When I told her I googled the issue and found that it may have been removed in iOS 8… She put me on hold, Came back and told me I was right.
What's worse is that that my Bluetooth headset is no longer working with my iPhone 5S. She stated that it may being I needed adjustment from the manufacturer of the headset– Plantronics. All I know is that the apple care representatives seem confused and I am extremely disappointed in this really impacts my use of Siri and my phone.
When I asked her to submit feedback to her supervisor or the powers that be… I was simply asked to submit feedback to the Apple.com website. While I understand Apple might read that feedback, I also recognize that they don't reply and I don't feel that is great support to someone like me who has a disability and needs a solution. The"Hey Siri" option is not working for me.
Does anyone have any workarounds for the "Raise to speak" problem or the Bluetooth problem? Specifically, the Bluetooth issue is when I try to hit the button on my Bluetooth headset to answer a call or end the call. It's a Plantronics PLT M20 model.

Follow-up to my earlier post that iPhone 6 Bluetooth not working correctly. I purchased a Jawbone MiniJambox to use as a speaker phone in my office. Everyone in our company thinks they are the best. However, it is experiencing the same issues as with all my other Bluetooth headsets. Everything works except cannot answer or hang up calls pushing the buttons on the Bluetooth devices. The Bluetooth patio speakers in our courtyard also have the same issue. However, my colleagues using iPhone 5 and 5s who did not update to iOS8 are using all Bluetooth devices without any issues. Apple says it is a problem with my Bluetooth device. Come on Apple.... This makes 7 different Bluetooth devices with different manufacturers. You cannot possibly believe the problem is with the Bluetooth devices when iOS7 works perfectly fine...
On another issue, my iPhone 5s worked perfectly fine in my vehicle entertainment center connected via USB. The vehicle entertainment center had complete control of my iPhone and iTunes. However, now I plug in my new iPhone 6 and it no longer communicates with my vehicle entertainment center. Again when I called Apple, they said my vehicle entertainment center needed a firmware update. Are you kidding me... That is a bunch of BS...!!!

Find My Friends Not Working Properly after iOS 7 Update

Following update to iOS7, the Find My Friends app doesn't seem to work properly anymore. In particular, when the app is on, or running in the background (i.e. you can see it when you double tap the home button) everything is fine and my friends can see my location. When the app is killed, i.e. off or not running in the background, then my friends cannot see where I am.
That was not the case with the old iOS where regardless of the app running in background or not, my friends could still see my location. Has this happened to anyone? Does anyone have a solution?
Thank you!

Appreciate that, but it's not as useful now. Many users have the same issue, also see
https://discussions.apple.com/message/23105624#23105624

Note not working properly after iOS 7 update,

After installazione of iOS 7 and following, Note never worked more, I see just for half second that it is updated from other devices but any chance to use it again, it appear and disappear immediately, somebody can give me some advise pls?

Quite frustrating
Sounds are either non existent, or sound like they're going through a distortion pedal.
Tried a hard reset, and will likely attempt a clean install/restore next...
Ugh... Apple...!!!
Ipad 2, iOS 7.0.2

Plug and play speakers not working properly after upgrading to Windows 8.1

After upgrading to Windows 8.1, my plug and play speakers do not work properly. I have uninstalled and reinstalled them, and restarted. When I try to play music, nothing comes out. If I turn them off and back on, music will play for approximately 30 seconds, only from one speaker, then it turns off and fades to no sound. They worked fine until I upgraded to Windows 8.1. The manufacturer has not been able to successfully assist me. Has anyone else reported a similar issue after upgrading OS software? Any suggestions? These are fairly new speakers, less than 2 years old, and not used very much. I do have them installed via a K-V switch, and all other devices linked to the K-V switch are functioning properly (monitor and wireless keyboard). Any suggestions would be greatly appreciated.

@sisboldt ,
Hello and thank you for posting on the HP support forums.
So that I can better help you with your sound issue. Please post back with your full model and product number. Use this link to help you find the information.
HP Notebook PCs - How Do I Find My Model Number or Product Number?
Here is another link you may find useful. Please give it a read before posting back with your system information.
Advice for asking the "Very Best Question"
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Notes are not working properly after 3.0 update, iPod touch

Since the update, my Notes have not worked properly. I had 3 active notes. Two, I've tried to close and can't. One, I can't access. I also can't save a new note, it kicks me out to the home screen if I try to. I also get kicked back to the home screen when I try to access my third active note. Anyone else experience this?

First connect your your device with iTunes.
You can try to delete your backup data for you iPhone/iPod touch. The backups are placed in ~/Library/Application Support/MobileSync/Backup/.
If you can identify the last backup it worded with notes you can delete all your later backup. Then it should work again.
Or you can find the backup data for notes in the *.mdinfo and *.mddata file. The application identifier should be something like com.apple.notes. Just search for that string in each *.mdinfo file. Than delete these files.
In iTunes right-click (or Control-click) the device, and choose Restore from Backup. Then everything should work fine again.

Play/Pause controls not working properly after IOS 8

I like streaming content off of a website I visit in safari. Before the update, I was able to play/pause the content from the lockscreen, I was also able to do it using my apple earpods. Now this feature doesn't want to work properly. It will work when I start listening, but if I let it play or stay paused for more than a minute, the controls stop working. If I press pause in the lock screen, nothing will happen. However, when I Slide-To-Open, the audio will start playing (or pausing) like I intended.

Follow-up to my earlier post that iPhone 6 Bluetooth not working correctly. I purchased a Jawbone MiniJambox to use as a speaker phone in my office. Everyone in our company thinks they are the best. However, it is experiencing the same issues as with all my other Bluetooth headsets. Everything works except cannot answer or hang up calls pushing the buttons on the Bluetooth devices. The Bluetooth patio speakers in our courtyard also have the same issue. However, my colleagues using iPhone 5 and 5s who did not update to iOS8 are using all Bluetooth devices without any issues. Apple says it is a problem with my Bluetooth device. Come on Apple.... This makes 7 different Bluetooth devices with different manufacturers. You cannot possibly believe the problem is with the Bluetooth devices when iOS7 works perfectly fine...
On another issue, my iPhone 5s worked perfectly fine in my vehicle entertainment center connected via USB. The vehicle entertainment center had complete control of my iPhone and iTunes. However, now I plug in my new iPhone 6 and it no longer communicates with my vehicle entertainment center. Again when I called Apple, they said my vehicle entertainment center needed a firmware update. Are you kidding me... That is a bunch of BS...!!!

Bluetooth not working correctly after iOS 4 update

I recently purchased and have been enjoying the Bose sound link wireless music system in fact I can't say enough about the accessory connecting wirelessly my iPad and iPhone to enjoy music. After the iOS 4 update my iPhone will no longer connect to the bose system while my iPad has no trouble.
Anyone else experiencing similar Bluetooth issues?
Tom

I also have an issue after 4.0 update today.
Can't discover any bluetooth devices from my 3GS iPhone. It "spins the wheel" searching but never finds any.
Bluetooth pairing from a Macbook Pro 17 / 10.6.4 results in a passkey being sent to the iPhone but the pairing hangs and there is no connection to the phone.
So the bluetooth kind of works. .the hardware is functiong (and was fine under 3.1.3).
This suggests it may be the new iOS4.0 with a few glitches

Epson USB Scanner not working properly after 10.44 update

After 10.44 update, my Epson 3490 USB Photo scanner has stopped working properly. Is this just another one of those update issues that seem to be reported at the moment. Will someone at Aplle actually fix thisat some point?

I can't open Epson Scan - it appears in the dock and info bar for about 2 seconds, then quits. I can sometimes open SmartPanel by pushing the scan button on the unit, but then it says "Please install the supported TWAIN driver." Most of the time it appears in the dock and info ba) but doesn't open the window itself. Epson couldn't fix it. It works on a PC, so they said it's a Mac problem.

IPad does not work properly in iOS 8.1

HI I have an iPad 4th generation when I restart it it gets the grey or blackscreen and takes a few minutes then goes to login screen please fix it had this problem since iOS 8. I did not have this problem in iOS 7.

I resolve the problem with several actions:
- remove iTunes 11.4
- install 11.3
- remove all music from ipad and iphone.
- on iTunes, declic the synchronization of music and synchomize the ipad with itunes.
- select music and synmchronize ; it finally worked.

IPod 5th Generation not charging properly after IOS 8 update...

Hello,
I was wondering if anybody has had this problem since the update or even with out the update.
Ever since I updated my IPod to the new IOS 8 I have had trouble charging it. I would plug in the lightning cable and it would show that it is charging with the little symbol but it seems to lose charge while it is plugged in instead of actually charging, even though it says it is. It's also taking a lot longer to charge now that it is doing this and I was just wondering if anyone else might be having this problem or knows how to fix it.
Thank you,
Miranda.

No problems here.
Please tell me that it has NEVER been jailbroke. If it has not been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

My copy and paste functions are not working properly since iOS 8 update

Ever since I updated to iOS 8 on my iPhone 4s the copy and paste function isn't working. It'll work the first time but any time I copy something else it pastes the first thing I copy. The only fix I've found is rebooting the phone but that is a pain to do every time I want to copy something and should be very unnecessary. I updated to 8.0.2 but that didn't fix it.

Have you tried rebooting?

Gps not working properly after 3.0 update

I have an unlcoked iPhone with version 3.0. Before I installed the update to the new version my gps worked great. It was very accurate and would follow along when traveling. Ever since I applied the update the gps is way off by 20-30 miles and it will no longer follow while traveling. Was just curious as to if anyone else is experiencing the same issues or if a update or fix was possible. Thanks for the help

First connect your your device with iTunes.
You can try to delete your backup data for you iPhone/iPod touch. The backups are placed in ~/Library/Application Support/MobileSync/Backup/.
If you can identify the last backup it worded with notes you can delete all your later backup. Then it should work again.
Or you can find the backup data for notes in the *.mdinfo and *.mddata file. The application identifier should be something like com.apple.notes. Just search for that string in each *.mdinfo file. Than delete these files.
In iTunes right-click (or Control-click) the device, and choose Restore from Backup. Then everything should work fine again.

Bluetooth devices are not working properly since ios 7 update...

Since I updated to ios 7, my Bluetooth devices are only partially compatible with my iphone. The devices will allow me to use the phone and all audio/video playback. However, I have lost the ability to do simpe tasks such as forward/reverse tracks with my devices. This loss of functionality is consistent across both Bluetooth Speakers (Monster Clarity HD) and in my vehicle (Lincoln MKX.)
Any suggestions?
Thanks!

This problem can be both hardware or software related. To elimnate the option of it being hardware related, I would make a Genius Bar appointment at your nearest Apple Store and have them check it out. They will be able to rule out the hardware issue. There are a couple of ways to try and fix hardware issues: 1) hard reset or 2) device restore. I've have linked articles with instructions to both for your reference.

ITunes / iPhone not working properly after newest update...

iTunes is not working properly after the newest update... It dosen't see my iPhone, the program acts very sluggish, and has trouble loading the Store. Anyone have a solution or an explanation? I have tried the suggestions found in other threads ie. restart, re-download, charge phone, restart phone and so on. Nothing works. Everything was working fine until iTunes and the new ios were installed. After that it all went to crap. Thanks, Randy...

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

IPAD Speakers not working properly after iOS 7 update

Similar Messages

Maybe you are looking for