IPad startup issues

Hi all,
When i try to startup my iPad 3G usualy, the first time a press & cold startup butto n I SSE lice a lite flash but notino happening. At second or thirdeye try apple log appears. What can I do to' solve it? Thank you

Mmmm. Not sure what's wrong. The iPad was released in Italy, right? Try rebooting your iMac and try it again. Run iTunes before you plug in your iPad.

Similar Messages

  • New StartUp Issue

    My new MacBook Pro 17" has been having startup issues recently. After I shut down, leave, and come back, the startup issue occurs.
    After pressing the power button, fans will go on, proccessing noises occur, HOWEVER, it just boots to a white/grey screen W/OUT the apple logo or round loading bar. The keyboard does not initialize either.
    The only thing that I have found to 'fix' it, is just to leave it powered off for an extended period of time. It will then boot up.
    I have tried many non-software related 'cures', and my compuer is completely up to date on all OsX software.
    Any ideas guys??

    you can try to boot to safe mode ( restart holding Shift )
    - you can attempt to boot to install disc and disk utility
    - you can boot to AHT ( apple hardware test ) to see what component is failing ( insert disc, restart holding D )
    - chances are, this is a hardware issue though. you will probably need repairs.

  • Startup issue - Process 'Starting Framework'

    Hi
    I seem to have a startup issue with NM2004s.  I get a Half Green/ Half Yellow icon in the MMC.  The 01 instance is always yellow and never progresses onto green.  I have a process status of 'starting framework'.
    Anyone else had this issue?
    Cheers
    Ian

    Hi Ian,
      I just installed the J2E on a laptop that already has a NSP instance.I am facing the same issue on the J2E.Do you remember if you could resolve this and how?
      Any hints would help.
    Thank you

  • Managed server startup issue!!!

    hi all,
    i am facing managedserver startup issue
    i am start the managed server it will up take the 6 min
    how to reduce the time
    1)i am trying differnt ways 1)threaddump 2)GCparamets
    but no usee
    can u see the log and give me suugestions
    below log one perticuler area it will load the application 4 min
    please see the time stamps 8:31:01 to 8:35:09
    please give me suggistions!!
    ======================================
    ####<Apr 11, 2010 8:31:00 PM PDT> <Info> <Deployer> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043060997> <BEA-149059> <Module eci.jar of application Agile is transitioning from STATE_PREPARED to STATE_ADMIN on server agwlcrptrn1.>
    ####<Apr 11, 2010 8:31:01 PM PDT> <Info> <EJB> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-010009> <EJB Deployed EJB with JNDI name com.eigner.eci.EciSession.>
    ####<Apr 11, 2010 8:31:01 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-000000> <Listener: end ModuleCtx[appId=Agile, modId=eci.jar, type=ejb, Target=Cluster/AgileCluster] STATE_PREPARED>STATE_ADMIN>
    ####<Apr 11, 2010 8:31:01 PM PDT> <Info> <Deployer> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-149060> <Module eci.jar of application Agile successfully transitioned from STATE_PREPARED to STATE_ADMIN on server agwlcrptrn1.>
    ####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043309172> <BEA-000000> <Relaying updated state for app, Agile to STATE_ADMIN>
    ####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043309173> <BEA-000000> < +++ Returning app's state : STATE_ACTIVE>
    ####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <

    hi sandeep,
    i take the thread dump 10 times at the start the server can u look into this one...
    ===============================
    CLASSPATH=/local/mnt/agile/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/local/mnt/agile/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/local/mnt/agile/bea/jrockit_160_05/lib/tools.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/weblogic_sp.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/weblogic.jar:/local/mnt/agile/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/webservices.jar:/local/mnt/agile/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/local/mnt/agile/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/local/mnt/agile/agile93/agileDomain/lib/jms.jar:/local/mnt/agile/agile93/agileDomain/lib/jndi.jar:/local/mnt/agile/agile93/agileDomain/lib/tibjms.jar
    PATH=/local/mnt/agile/bea/wlserver_10.3/server/bin:/local/mnt/agile/bea/modules/org.apache.ant_1.6.5/bin:/local/mnt/agile/bea/jrockit_160_05/jre/bin:/local/mnt/agile/bea/jrockit_160_05/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin
    Your environment has been set.
    QCHTTPHeaderIdentityAsserter.initialize
    AgileAuthenticationProviderImpl.initialize
    2010-04-10 20:03:14
    Full thread dump Java HotSpot(TM) Server VM (10.0-b19 mixed mode):
    "Thread-13" daemon prio=10 tid=0x62a8a800 nid=0x1b6 waiting on condition [0x5f7b8000..0x5f7b9130]
    java.lang.Thread.State: WAITING (parking)
         at sun.misc.Unsafe.park(Native Method)
         - parking to wait for <0xf2d78078> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
         at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
         at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
         at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
         at weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
         at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
         at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
         at weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
    "LDAPCache-TTLTimer" daemon prio=10 tid=0x09277000 nid=0x1b5 in Object.wait() [0x5f90b000..0x5f90bfb0]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d7c068> (a netscape.ldap.TTLTimer)
         at netscape.ldap.TTLTimer.run(LDAPCache.java:828)
         - locked <0xf2d7c068> (a netscape.ldap.TTLTimer)
         at java.lang.Thread.run(Thread.java:619)
    "LDAPConnThread-1 ldaps://qpip.qualcomm.com:389" daemon prio=10 tid=0x5f6fc000 nid=0x1b4 runnable [0x5f95c000..0x5f95d030]
    java.lang.Thread.State: RUNNABLE
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
         - locked <0xf2d820a8> (a java.io.BufferedInputStream)
         at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
         at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:538)
         at java.lang.Thread.run(Thread.java:619)
    "Thread-12" daemon prio=10 tid=0x61c2ac00 nid=0x1b3 waiting on condition [0x5f9ad000..0x5f9adeb0]
    java.lang.Thread.State: TIMED_WAITING (sleeping)
         at java.lang.Thread.sleep(Native Method)
         at oracle.jdbc.pool.OracleConnectionCacheTimeOutThread.run(OracleConnectionCacheTimeOutThread.java:80)
    "LDAPConnThread-0 ldap://10.47.24.141:9001" daemon prio=10 tid=0x61cb5400 nid=0x1b1 runnable [0x5fb55000..0x5fb55db0]
    java.lang.Thread.State: RUNNABLE
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
         - locked <0xf2d920a8> (a java.io.BufferedInputStream)
         at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
         at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:538)
         at java.lang.Thread.run(Thread.java:619)
    "DoSManager" daemon prio=10 tid=0x0932a000 nid=0x1b0 waiting on condition [0x5f9fe000..0x5f9fee30]
    java.lang.Thread.State: TIMED_WAITING (sleeping)
         at java.lang.Thread.sleep(Native Method)
         at com.octetstring.vde.DoSManager.run(DoSManager.java:433)
    "VDE Transaction Processor Thread" daemon prio=10 tid=0x61c07000 nid=0x1ae in Object.wait() [0x5fba6000..0x5fba7130]
    java.lang.Thread.State: WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d70090> (a com.octetstring.vde.backend.standard.TransactionProcessor)
         at java.lang.Object.wait(Object.java:485)
         at com.octetstring.vde.backend.standard.TransactionProcessor.waitChange(TransactionProcessor.java:367)
         - locked <0xf2d70090> (a com.octetstring.vde.backend.standard.TransactionProcessor)
         at com.octetstring.vde.backend.standard.TransactionProcessor.run(TransactionProcessor.java:212)
    "ExecuteThread: '16' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a67400 nid=0x1ad waiting for monitor entry [0x5fbf7000..0x5fbf7fb0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '15' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a66000 nid=0x1ac waiting for monitor entry [0x5fc48000..0x5fc49030]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '14' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a65000 nid=0x1ab waiting for monitor entry [0x5fc99000..0x5fc99eb0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '13' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a63c00 nid=0x1aa waiting for monitor entry [0x5fcea000..0x5fceaf30]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '12' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a62c00 nid=0x1a9 runnable [0x5fd3b000..0x5fd3bdb0]
    java.lang.Thread.State: RUNNABLE
         at weblogic.socket.PosixSocketMuxer.poll(Native Method)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:102)
         - locked <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '11' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a61c00 nid=0x1a8 waiting for monitor entry [0x5fd8c000..0x5fd8ce30]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '10' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a60800 nid=0x1a7 waiting for monitor entry [0x5fddd000..0x5fdde0b0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '9' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a6f400 nid=0x1a6 waiting for monitor entry [0x5fe2e000..0x5fe2f130]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '8' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928d400 nid=0x1a5 waiting for monitor entry [0x5fe7f000..0x5fe7ffb0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '7' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928c000 nid=0x1a4 waiting for monitor entry [0x5fed0000..0x5fed1030]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '6' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928b000 nid=0x1a3 waiting for monitor entry [0x5ff21000..0x5ff21eb0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '5' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0930c400 nid=0x1a2 waiting for monitor entry [0x5ff72000..0x5ff72f30]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '4' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928dc00 nid=0x1a1 waiting for monitor entry [0x5ffc3000..0x5ffc3db0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '3' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x09288c00 nid=0x1a0 waiting for monitor entry [0x60014000..0x60014e30]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '2' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x092d4800 nid=0x19f waiting for monitor entry [0x60065000..0x600660b0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x092d4400 nid=0x19e waiting for monitor entry [0x600b6000..0x600b7130]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0932d800 nid=0x19d waiting for monitor entry [0x60107000..0x60107fb0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x0932c400 nid=0x19c in Object.wait() [0x60158000..0x60159030]
    java.lang.Thread.State: WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2daa030> (a weblogic.work.ExecuteThread)
         at java.lang.Object.wait(Object.java:485)
         at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:157)
         - locked <0xf2daa030> (a weblogic.work.ExecuteThread)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    "Thread-7" daemon prio=10 tid=0x0932e400 nid=0x19b waiting on condition [0x601a9000..0x601a9eb0]
    java.lang.Thread.State: WAITING (parking)
         at sun.misc.Unsafe.park(Native Method)
         - parking to wait for <0xf2daa150> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
         at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
         at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
         at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
         at weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
         at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
         at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
         at weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
    "weblogic.timers.TimerThread" daemon prio=10 tid=0x60467800 nid=0x19a in Object.wait() [0x603fe000..0x603fef30]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2daa2c0> (a weblogic.timers.internal.TimerThread)
         at weblogic.timers.internal.TimerThread$Thread.run(TimerThread.java:267)
         - locked <0xf2daa2c0> (a weblogic.timers.internal.TimerThread)
    "weblogic.time.TimeEventGenerator" daemon prio=10 tid=0x60431800 nid=0x199 in Object.wait() [0x60555000..0x60555db0]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2daa380> (a weblogic.time.common.internal.TimeTable)
         at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:286)
         - locked <0xf2daa380> (a weblogic.time.common.internal.TimeTable)
         at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:117)
         at java.lang.Thread.run(Thread.java:619)
    "[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x6042e000 nid=0x198 runnable [0x605a5000..0x605a6e30]
    java.lang.Thread.State: RUNNABLE
         at java.util.HashMap.<init>(HashMap.java:209)
         at java.util.jar.Manifest.<init>(Manifest.java:37)
         at java.util.jar.JarFile.getManifestFromReference(JarFile.java:160)
         at java.util.jar.JarFile.getManifest(JarFile.java:146)
         at weblogic.utils.classloaders.GenericClassLoader$JarSource.getManifest(GenericClassLoader.java:528)
         at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:310)
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:288)
         - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
         - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
         at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
         at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
         - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
         at java.lang.ClassLoader.defineClass1(Native Method)
         at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
         at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
         at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:335)
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:288)
         - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
         - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
         at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
         at weblogic.ejb.container.deployer.EJBModule.setupEJBToImplClassDependencies(EJBModule.java:1790)
         at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:397)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
         at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
         at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
         at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
         at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
         at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    "Timer-1" daemon prio=10 tid=0x609e3800 nid=0x197 in Object.wait() [0x605f7000..0x605f80b0]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d7a2c0> (a java.util.TaskQueue)
         at java.util.TimerThread.mainLoop(Timer.java:509)
         - locked <0xf2d7a2c0> (a java.util.TaskQueue)
         at java.util.TimerThread.run(Timer.java:462)
    "Timer-0" daemon prio=10 tid=0x609e0000 nid=0x196 in Object.wait() [0x62350000..0x62351130]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d7a3b0> (a java.util.TaskQueue)
         at java.util.TimerThread.mainLoop(Timer.java:509)
         - locked <0xf2d7a3b0> (a java.util.TaskQueue)
         at java.util.TimerThread.run(Timer.java:462)
    "RMI TCP Accept-9896" daemon prio=10 tid=0x61ebf800 nid=0x194 runnable [0x623ba000..0x623bb030]
    java.lang.Thread.State: RUNNABLE
         at java.net.PlainSocketImpl.socketAccept(Native Method)
         at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
         - locked <0xf2d76210> (a java.net.SocksSocketImpl)
         at java.net.ServerSocket.implAccept(ServerSocket.java:453)
         at java.net.ServerSocket.accept(ServerSocket.java:421)
         at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
         at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
         at java.lang.Thread.run(Thread.java:619)
    "RMI TCP Accept-0" daemon prio=10 tid=0x61eb6c00 nid=0x193 runnable [0x6240b000..0x6240beb0]
    java.lang.Thread.State: RUNNABLE
         at java.net.PlainSocketImpl.socketAccept(Native Method)
         at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
         - locked <0xf2da0170> (a java.net.SocksSocketImpl)
         at java.net.ServerSocket.implAccept(ServerSocket.java:453)
         at java.net.ServerSocket.accept(ServerSocket.java:421)
         at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
         at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
         at java.lang.Thread.run(Thread.java:619)
    "Low Memory Detector" daemon prio=10 tid=0x63b01400 nid=0x192 runnable [0x00000000..0x00000000]
    java.lang.Thread.State: RUNNABLE
    "CompilerThread1" daemon prio=10 tid=0x63901c00 nid=0x191 runnable [0x00000000..0x634f3278]
    java.lang.Thread.State: RUNNABLE
    "CompilerThread0" daemon prio=10 tid=0x63900800 nid=0x190 runnable [0x00000000..0x635742f8]
    java.lang.Thread.State: RUNNABLE
    "Signal Dispatcher" daemon prio=10 tid=0x0919e000 nid=0x18f waiting on condition [0x00000000..0x00000000]
    java.lang.Thread.State: RUNNABLE
    "Finalizer" daemon prio=10 tid=0x09183000 nid=0x18e in Object.wait() [0x63aad000..0x63aae130]
    java.lang.Thread.State: WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d8e2d0> (a java.lang.ref.ReferenceQueue$Lock)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
         - locked <0xf2d8e2d0> (a java.lang.ref.ReferenceQueue$Lock)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
         at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
    "Reference Handler" daemon prio=10 tid=0x09181c00 nid=0x18d in Object.wait() [0x63afe000..0x63afefb0]
    java.lang.Thread.State: WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2daa4c8> (a java.lang.ref.Reference$Lock)
         at java.lang.Object.wait(Object.java:485)
         at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
         - locked <0xf2daa4c8> (a java.lang.ref.Reference$Lock)
    "main" prio=10 tid=0x0900f000 nid=0x17b in Object.wait() [0xf7f1d000..0xf7f1e208]
    java.lang.Thread.State: WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d723c8> (a weblogic.t3.srvr.SubsystemRequest)
         at weblogic.t3.srvr.SubsystemRequest.rendezvouz(SubsystemRequest.java:100)
         - locked <0xf2d723c8> (a weblogic.t3.srvr.SubsystemRequest)
         at weblogic.t3.srvr.SubsystemRequest.action(SubsystemRequest.java:81)
         at weblogic.t3.srvr.SubsystemRequest.start(SubsystemRequest.java:51)
         at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:457)
         at weblogic.t3.srvr.ServerServicesManager.startInAdminState(ServerServicesManager.java:237)
         - locked <0x6536b220> (a java.lang.Class for weblogic.t3.srvr.ServerServicesManager)
         at weblogic.t3.srvr.T3Srvr.initializeAdmin(T3Srvr.java:738)
         at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:499)
         at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
         at weblogic.Server.main(Server.java:67)
    "VM Thread" prio=10 tid=0x0917e800 nid=0x18c runnable
    "GC task thread#0 (ParallelGC)" prio=10 tid=0x09015c00 nid=0x17c runnable
    "GC task thread#1 (ParallelGC)" prio=10 tid=0x09016c00 nid=0x17d runnable
    "GC task thread#2 (ParallelGC)" prio=10 tid=0x09018000 nid=0x17e runnable
    "GC task thread#3 (ParallelGC)" prio=10 tid=0x09019000 nid=0x17f runnable
    "GC task thread#4 (ParallelGC)" prio=10 tid=0x0901a000 nid=0x180 runnable
    "GC task thread#5 (ParallelGC)" prio=10 tid=0x0901b000 nid=0x181 runnable
    "GC task thread#6 (ParallelGC)" prio=10 tid=0x0901c400 nid=0x182 runnable
    "GC task thread#7 (ParallelGC)" prio=10 tid=0x0901d400 nid=0x183 runnable
    "GC task thread#8 (ParallelGC)" prio=10 tid=0x0901e400 nid=0x184 runnable
    "GC task thread#9 (ParallelGC)" prio=10 tid=0x0901f400 nid=0x185 runnable
    "GC task thread#10 (ParallelGC)" prio=10 tid=0x09020800 nid=0x186 runnable
    "GC task thread#11 (ParallelGC)" prio=10 tid=0x09021800 nid=0x187 runnable
    "GC task thread#12 (ParallelGC)" prio=10 tid=0x09022800 nid=0x188 runnable
    "GC task thread#13 (ParallelGC)" prio=10 tid=0x09023800 nid=0x189 runnable
    "GC task thread#14 (ParallelGC)" prio=10 tid=0x09024c00 nid=0x18a runnable
    "GC task thread#15 (ParallelGC)" prio=10 tid=0x09025c00 nid=0x18b runnable
    "VM Periodic Task Thread" prio=10 tid=0x61ec2000 nid=0x195 waiting on condition
    JNI global references: 957
    Heap
    PSYoungGen total 229376K, used 39147K [0xe4d70000, 0xf4d70000, 0xf4d70000)
    eden space 196608K, 8% used [0xe4d70000,0xe5cf3870,0xf0d70000)
    from space 32768K, 70% used [0xf2d70000,0xf4427708,0xf4d70000)
    to space 32768K, 0% used [0xf0d70000,0xf0d70000,0xf2d70000)
    PSOldGen total 1835008K, used 0K [0x74d70000, 0xe4d70000, 0xe4d70000)
    object space 1835008K, 0% used [0x74d70000,0x74d70000,0xe4d70000)
    PSPermGen total 62208K, used 62093K [0x64d70000, 0x68a30000, 0x74d70000)
    object space 62208K, 99% used [0x64d70000,0x68a134a8,0x68a30000)

  • Startup issue when having more than one database on machine

    Startup issue when having more than one database on machine:
    I’ve installed two databases.
    When I shutdown one of the database and try to start it up using
    Startup pfile=’…location..’;
    I get ora-12514: TNS: listener does not currently know of service rquirest in connect descriptor
    when I try it again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn’t exist
    Shutdown and Startup gave no problems when I had one database. Why am I getting problems when I have two databases?
    I’m using: show parameter pfile|spfile; to make sure I have the right parameter locations, so the error shouldn’t be from location.
    I’ve never installed two databases on one machine, so maybe I’m making a first-timer’s error.
    Anyone know how to get this working, i.e. starting and stopping DB without issues?
    Using oracle 11gR2 on Windows 7 64bit, all is working normal.
    Thanks,
    Ayman
    Edited by: aymanzone on Jun 15, 2011 9:27 AM

    aymanzone wrote:
    my oracle_sid is set to the name of one of my databases
    echo %oracle_sid%
    shows me the name of my first database.
    Still not working though.
    When I start the services of both databases using Services, I can connect and run queries from both of the database.
    Edited by: aymanzone on Jun 15, 2011 11:47 AMFirstly ... the Oracle Service for the instance should be started for the DB you are trying to connect or start.
    Next ... from the command prompt:
    set oracle_sid=<Instance_Name>
    sqlplus sys as sysdba
    startup pfile='location of the respective db pfile'
    Now, if you want to start or connect to another DB which is on the same server (again assuming the Service is STARTED) ...
    From the same command prompt session or other ....
    set oracle_sid=<Other_Instance_Name>
    sqlplus sys as sysdba
    startup pfile='location of the respective db pfile'
    Edited by: Srikanth on Jun 16, 2011 12:27 AM

  • Another startup-issue

    I have a problem with system startup. My MacBook is pretty much brand new and the system is not cluttered or anything. And still the startup-process freezes even before the apple logo appears, so I just get the grey screen and that's it. I have read about other startup issues, but in those cases the computer at least booted until the apple logo was shown, so my case is slightly different.
    After unplugging my external USB hard drive startup works. It also works when I plug it into the other USB-slot. Other devices plugged into the problematic slot (keyboard, USB-stick) work and do not cause problems during startup.
    Any experiences with this problem? Would you say the USB-slot is broken in any way? Is it something that can be fixed?
    Ordinarily, I would just use the other slot and be done with it. Since the computer is brand new, however, I'd prefer to be on the safe side.
    Thanks in advance,
    Timo

    Hi
    +"Would you say the USB-slot is broken in any way?"+
    Possibly? Running an Apple Hardware Test might say?
    +"Is it something that can be fixed?"+
    Yes. It should be covered under the standard 1 year warranty regardless. Provided the fault is not down to wilful or accidental damage it will be covered under the warranty.
    You could connect the external USB hard drive in the affected slot an restart the mac in verbose mode (command+v) at restart. This should display error messages - if any - at the point where the start-up stalls. Possibly giving a clue as to what it's having a problem with? You may see an I/OKit error problem or something similar?
    Tony

  • Best ressources for "ANDROID vs IPAD video issues"

    Hello
    Would someone be kind enough to post here the best ressources for the "ANDROID vs IPAD VIDEOS issues" ?
    I got lots of troubles to have some videos working on Samsung Galaxytab ...
    thanx !

    mm  well
    Sorry but what is the definition of "inline" videos, I wanna be really sure (i'm not english / in my language my videos are "inline" videos: videos put inside the document).)
    On some apps I made, some videos work, some don't. And
    one of the main issues are
    - they launch full screen when they're not supposed to (i want them to launch in a definite area)
    - they dont launch full screen when they're supposed to (when they're suppposed to play in full screen, they just do not appear: black screen)
    mmm ?

  • IPad startup screen scaling

    I have an Air for iOS app that supports iPhone and iPad. I have included the following screeens:
    Default-portrait.png -- 768 x 1024 for iPad startup
    [email protected] -- 640 x 960 for iPhone 4 startup
    Default.png -- 320 x 480 for iPhone 3GS
    On the iPad, the image draws quickly, but is blurry and scales down as soon as it loads -- it looks like it is loading scaled larger than it's native size then popping down. And the image itself is saved as a lossless png, but draws as a very blurred pic.
    Anyone else run into this?

    Could you rename your png files as:
    Default.png - iPad
    Default@2x~iphone.png iPhone4
    Default~iphone.png iPhone 3GS?
    These are the guidelines for a universal app as per http://developer.apple.com/library/ios/#documentation/iPhone/Conceptual/iPhoneOSProgrammin gGuide/App-RelatedResources/App-RelatedResources.html#//apple_ref/doc/uid/TP40007072-CH6-S W12.
    Hope this helps.
    Sanika

  • IPad startup video option

    Is there an iPad startup video option (non-jailbroken, non third-party, etc.) that would accommodate custom videos?

    There's no way to make an iPad play a video when it is turned on.
    There's no way to make it auto-start an application without user activity.
    However it does have a 'kiosk mode' that you can put it into, which prevents anyone quitting an application.  So if you can put it into a video-playing application then you can lock it down like that until the battery loses power.  I've seen people use Keynote, with several videos loaded, in this way.
    Sorry.

  • IMessage not working on 5S and iPad Air issues

    iMessage not working on 5S. Had 3 online chats with apple support but still not fixed. iPad air issues also; safari shuts down a lot on mine and my husbands iMessage not working. iMessage works on his 5S. Never had so many issues with Apple before. I receive SMS messages on 5S but no iMessage. It was suggested to me that I get a new sim or try another wifi, both seem odd given everything else works.
    My husband and I got our phones the same day, his works right, mine doesn't.
    iPad airs were purchased a month apart, mine works ok apart from safari shutdowns and his iMessage not working.
    Also the slider to answer calls on both phones not always working. Had to reboot one of them and it forced us to set it up again from scratch.
    Any ideas?

    restore from backup or restore as new.

  • Have any ideas re: G5 startup issues? Long post...

    My dual processor G5 (purchased Jan. 2005) is in the shop, and, of course, out of warranty. It's been down for over two weeks. Here is the story of its demise:
    Installed 10.4.9 upgrade. Began having "launch systems" and crashdump/usb crash errors thereafter. Not a lot of info online regarding these problems, so I decided to do an archive and re-install of my system software.
    Started having intermittent problems restarting the G5. Either it would chime, but not kick on the monitor, chime and kick on the monitor but hang at the grey apple startup screen, or not chime at all, with which only the fans would come on. Apple Extended Hardware Test came back OK. Still had problems after removing my USB devices.
    Problems continued after the reinstall of the system software, eventually to the point where I could not even boot from a CD. When the G5 did operate, after a short period of use it would freeze, and I would have to force a restart and pray it would boot up completely. It would reliably freeze after waking it from sleep, but also froze in iPhoto and Finder as well.
    I have tried resetting the PMU and the PRAM with no improvement. Took it to an Apple Authorized Service Center, luckily only a couple miles from where I work. They tried booting with the Apple RAM only, then the third party RAM only, no improvement. Hard drive was completely reformatted and system reinstalled, no improvement. I am waiting to hear what else they've tried.
    My G5's serial # falls outside of those involved with the power supply issues. Yet, could this be a possibility? Any other ideas as to what the problem could be, or has anyone had similar issues?
    I freelance as a graphic designer and this has me in a panic. Now using the hubby's Intel iMac to run CS2 and it's a drag.
    Thanks in advance.

    Hi and thanks for the input. I just spoke to the Apple service guy and he still insists there is not a hardware issue. Apparently there is an Apple technical doc, available only to authorized techs, that refers to this particular issue, and the fix is a download and install (firmware, perhaps?) He has to contact Apple and confirm my G5 is within the serial # range for this particular fix.
    That's my best interpretation of our discussion. He was rather cryptic. But he says it's not the power supply.
    I did an archive and install because, like an idiot, I did not have anything backed up at that point. After that failed, I used up my stash of DVDs and copied gigs to our iMac until the G5 gave out. I had run the hardware test several times and each time came back clean.
    Permissions were repaired before and after updates; had it freeze a couple times mid-update. Tried booting in safe mode and single-user mode and still had the same startup issues.
    To add insult to injury, I purchased a LaCie Porsche external drive as an eventual backup drive whenever the G5 returns. Hooked it up to our iMac to backup the items I saved off the G5. It failed after the second use. Returned for replacement.
    Thanks.
    G5 Dual 2.5 MHz Mac OS X (10.4.8)

  • IPad air issues

    I am having problems with my iPad air the wifi keeps disconnecting and is slow loading up I know the problem is with the iPad asit he wife has the ipad 2 which is out performing the iPad air.
    I have done all the resetting and restoring as stated on earlier posts I havesent it to apple and they are saying there is not a problem
    ANyone else having thes issues

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • IPad connectivety issues

    I have an iPad 2 using 6.1.3 and the Wifi connection within my house outside the room with router is really weak.
    I notice when I go to public WIfi locations, I have weak or no signal.
    This has been an issue since May 2012.
    In these same locations my Macbook Pro connects with no issues.
    What is the solution?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Black Macbook Startup Issues

    Hey guys.
    I'm having a distressful startup issue with my Macbook (13-inch, black). It's happened to me before, but that was a few months ago and everything was fine. Now it's happening again and I'm getting worried that the workaround I've found won't work anymore.
    The first time it happened, I wanted to restart my computer because I had installed a bunch of things and it was running a little slow. After I restarted, I heard the "GONG", the apple appeared, and the spinning gear also appeared. It seemed to be working, but after a few minutes, the apple changed to a "do not enter" sign.
    I tried resetting the P-RAM to no avail, and finally ended up starting up in Safe Mode (by holding the Shift Key) which at least allowed me to start up my computer. From there, I was able to reset and my computer started up normally after that just fine.
    Now, last night, the same thing started happening. There were a few different things that happened this time. For one, I got a big gray box on my screen that told me I needed to reset my computer in a few different languages. Secondly, (the only thing I can attribute the cause to) was that I had opened iChat for the first time in 5 months or so. Shortly after is when I got the box.
    So I reset and started having the same problem. I've reset in safe mode now, and am currently installing an update to OSX 10.6.3.
    The only programs running at the time of the incident were:
    -Google Chrome
    -Text Edit
    -iCal
    -iTunes
    Any help you guys have for me would be GREATLY appreciated! I took it to an Apple store the first time it happened and they didn't know what was wrong with it. :/

    Well, after booting in Safe Mode and installing the update, it started up just fine. I am afraid that this is going to happen again, though. Any help you guys have would be GREATLY appreciated.
    Thanks.

  • Ipad Facebook issues, under "settings" Facebook will not accept my password, nor will it delete the account. Have tried deleting the FB app and installing it again, have tried restarting ipad, any thoughts?

    Ipad Facebook issues, under "settings" Facebook will not accept my password, nor will it delete the account. Have tried deleting the FB app and installing it again, have tried restarting ipad, any thoughts?

    same problem SO FRUSTRATING

Maybe you are looking for