IPad storage management

I thought by purchasing iMatch it would allow music on iPad and iPhone to disoccupy memory… did not happen. I have a lot of free storage available on icloud. Anyone understand this?
Thanks

How did you subscribe to iTunes Match ? You can only upload your music to Match from your computer's iTunes library. Match doesn't use any of your 'normal' iCloud space, subscribing to Match allows you to upload your own music to the cloud, and any space that that requires is separate to your iCloud allowance and is included in the Match subscription.
You've uploaded your music to Match from your computer, and turned it 'on' on your iPad ?
Subscribing to Match : http://support.apple.com/kb/HT4914
Using Match on an iOS device : http://support.apple.com/kb/HT5637

Similar Messages

  • HT4847 My Ipad says that i am running out of storage but my icloud says that ive only used 1.4gb of the 5 allotted and when i go to usage manage storage all my apps are turned t the on postpition for backup. So i dont nderstand why my ipads storage is bei

    My Ipad says that i am running out of storage but my icloud says that ive only used 1.4gb of the 5 allotted and when i go to usage manage storage all my apps are turned t the on postpition for backup. So i dont nderstand why my ipads storage is being used

    iCloud doesn't give you more storage on your device, it only gives you more storage in iCloud to sync data, store your backups, etc.  If you're running out of space on your iPad you'll have to delete some data off your iPad to free it up, such as syncing some of your music or other media off your iPad. 
    You can check how much free space is available on your iPad by going to Settings>General>Usage and looking at the Available number at the top.

  • IPhoto storage management on iPad

    The iPad storage is quickly filled up with photos and journals.
    Is there a way to store iPhoto journals on iCloud only to free up space on my iPad?

    Always sync photos to your computer for archiving.  After doing that you can delete photos on the device.  Not sure about jounals.
    Read this...  import photos to your computer...
    http://support.apple.com/kb/HT4083

  • Ipad storage full?

    Hi
    My ipad storage is almost full. I have 4gb + of music I would like to put in cloud. I have purchased extra icloud storage but see no way to store the music there?! How do I manage the storage. My times newspaper app is also using 5 gb is that normal?
    Any help much appreciated!

    If you want to be able to play it on your iPad then yes, you will need the music stored on it. Does the Times newspaper app allow you to manually delete past editions.
    iTunes Match is available here in the UK, but it costs £21.99 per annum : http://www.apple.com/uk/itunes/itunes-match/
    Using Match on an iOS device : http://support.apple.com/kb/HT5637 - you can stream music from it (so you would need to be online) or download the music.
    iCloud is for backing up your data / documents / photos e.g. it's an alternative to backing up to a computer's iTunes. But iCloud doesn't include everything e.g. audiobooks and ringtones can't be redownloaded, and an iCloud backup doesn't include your own music (and any item could be removed from the store at any time, so restoring to an iCloud backup might not be able to restore eveything e.g. if an apphas been removed from the store then it won't be able to reinstall it and its contents)
    iCloud : http://www.apple.com/icloud
    iCloud features : http://www.apple.com/icloud/features/

  • A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?

    Question repeated: A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?
    I want to restore from my june 2012 backup because it contains pictures that i lost when my phone broke in september. if anyone could help that would be awesome. thanks

    Did you tap "Show older backups" on the Choose Backup screen (see image below)?

  • My ipod wont update any apps, it says something about storage managment but i have 4 gigs left and all of my iclous storage left. Is their ayway to fix this

    my app store wont let me update any apps when i click the update all button it doesnt do anything and eventually says i need to manage my storage, i have 4.4 gigs left and all of my icloud storage left and i just deleted 5 app hoping it would make room but it didnt work. is there something that happened to itouch 3rd gen during th ios5 update or something? please let me know if there is anything i can do

    it says something about storage management
    Try these support articles...
    iCloud: Managing your iCloud storage
    iCloud: Purchasing iCloud Storage and Billing

  • Intel Matrix Storage Manager disables Windows Update and Windows Validation on Windows 7 64-bit

    I have a Lenovo ThinkPad R61 8918CTO on which I did a clean install of Windows 7 Ultimate SP1 (64-bit) on a new Seagate Momentus XT 750GB drive. The installation was trouble-free, as were all of the post-install Windows Updates.
    Then I installed ThinkVantage System Update 4.03 and used it to install most of the available Lenovo updates. Big mistake. I'll spare you a detailed account of the hours I wasted troubleshooting, rolling back to previous restore points, and doing more troubleshooting, but it turns out that installing Intel Matrix Storage Manager driver v. 8.9.2.1002 caused Windows Update and Windows Validation to fail.
    Symptoms: Windows Update control panel can't check for updates and reports that the Windows Update service isn't running when it actually is. Online Windows Validation fails and the standalone Windows Validation utility won't install. Microsoft programs that require a validated copy of Windows (e.g., Microsoft Security Essentials) won't install. 
    Solution: Roll back the driver for the relevant SATA controller to the previous driver.
    I've reinstalled ThinkVantage System Update 4.03 and hidden the proposed Intel Matrix Storage Manager update; since then, I've used it to complete my Lenovo updates without issue.
    I hope this post will help other people with this problem find the solution a lot faster than it took me!

    This happened after installing a new advanced format drive with 4k-byte sectors, I'd guess.  If the storage driver doesn't report the physical sector size to Windows, update fails.
    I just ran across this myself (again) putting Win 7 on a T400.
    I don't know why this is still going on.  It may be that the update lists for older machines still have pre-AF-drive drivers listed.
    FYI, another fix is going to the Intel site and installing the latest Matrix Storage Manager AHCI driver.  This may be more desirable than rolling back to an older driver in some cases.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • P55-CD53, how to install SATA AHCI drivers and Matrix Storage Manager?

    Please excuse my noobness as this is for my first PC build and much of it is Greek to me, but could someone please inform/educate me as to what the following drivers (link) are for and which need to be installed after a fresh installation of Windows 7 Pro x64? Do I need to install all of them because some of these appear to be redundant, just from different manufacturers, or am I mistaken? I have a single 500GB HDD but will probably add more down the road.
    JMicron JMB36x IDE Drivers (including floppy driver)
    Description   XP/Vista/Win7 Ver: 17.49.04.WHQL
    Update Date   2009-07-27
    Your System OS   XP/Vista/Win7 32/64bit
    (3989KB)
    Intel P55 AHCI / RAID Drivers
    Description   Ver: 8.9.0.1023
    Update Date   2009-07-24
    Your System OS   XP/Vista/Win7 32/64bit
    (23048KB)
    Intel P55 SATA RAID Driver (For floppy driver)
    Description   Intel P55 SATA RAID driver
    1. Extract the file and Copy all files to the floppy.
    2. Press F6 to install driver through the floppy when booting and loading RAID function.
    Update Date   2009-07-24
    Your System OS   XP/Vista/Win7 32/64bit
    (443KB)
    JMicron IDE/SATA RAID Drivers (with AP)
    Description   XP/Vista Driver Version: 1.17.43.05
    For floppy install:
    Please copy all the directories and files in the "floppy" folder to the root directory of a floppy disk to create a pre-install disk for Win2K/WinXP/Win2003/WinXP 64bits/Win2003 64bits.
    For example,
    A:\amd64
    \x32
    txtsetup.oem
    To enhance IDE transfer speed, we strongly recommend you install JMicron IDE/SATA Driver.
    Update Date   2009-02-23
    Your System OS   Windows Vista 32/64bit
    (4032KB)
    Windows XP 32bit
    (4032KB)
    Intel TPM Device Driver
    Description   Intel Trusted Platform chipset driver
    XP/Vista/Win7: 2.00.0000.00
    Update Date   2007-11-02
    Your System OS   Vista/Win7 32/64bit
    (23KB)
    Windows XP 32bit
    (23KB)
    On a side note, I have already flashed the BIOS to 1.4 using the Forum USB Flashing Tool (thanks!).

    Thanks.
    After booting from the Windows 7 disc, I selected Repair Windows, Load Drivers. Which specific controllers do I need to install for the P55-CD53 MB since there are multiple controllers listed for each of the four SATA compressed files?
    Considering the multiple files and multiple controllers, is there no one out there with a P55-CD53 that has AHCI mode enabled that can give dumbed down instructions on how to do so?
    The manual states "Select the appropriate RAID controller and press enter." Well... which one is the appropriate controller? Am I suppose to load the driver for all the AHCI controllers if that's even possible?
    For the Intel P55 AHCI / RAID Drivers compressed file, these are the controllers available within F6flpy64\iaAHCI.inf:
    Intel(R) ESB2 SATA AHCI Controller
    Intel(R) ICH 10D/DO SATA AHCI Controller
    Intel(R) ICH10R SATA AHCI Controller
    Intel(R) ICH7M/MDH SATA AHCI Controller
    Intel(R) ICH7R/DH SATA AHCI Controller
    Intel(R) ICH8M-E/M SATA AHCI Controller
    Intel(R) ICH8R/DH/DO SATA AHCI Controller
    Intel(R) ICH9M-E/M SATA AHCI Controller
    Intel(R) ICH9R/DO/DH SATA AHCI Controller
    Intel(R) PCH SATA AHCI Controller
    Intel(R) PCHM SATA AHCI Controller 4 Port
    Intel(R) PCHM SATA AHCI Controller 6 Port
    Also, regarding the dual BIOS controls for SATA/IDE/RAID settings previously mentioned, I believe SATA ports 1-6 are controlled via Intel and 7,8 are controlled via Jmicron. Considering my HDD is currently plugged into SATA 1, Jmicron probably isn't necessary for the moment.
    Edit:
    Turns out that none of the drivers for the controllers listed in iaAHCI.inf could be installed. However, I went ahead and installed the drivers listed for all the controllers in iaStor.inf. I reinstalled Windows 7 to get rid of the BSOD. I then installed the chipset drivers and Intel Matrix Storage Manager.

  • It is not possible to install LenovoEMC Storage Manager for Linux on Ubuntu 14.10

    hi,
    I have big problem installing LenovoEMC Storage Manager for Linux on Ubuntu 14.10 64bit.
    I downloaded it from https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/26108
    Installed JRE (both 64 and 32 bit)
    Selection Path Priority Status
    0 /usr/lib/jvm/java-8-oracle/jre/bin/java 1 auto mode
    * 1 /usr/lib/jvm/java-8-oracle/jre/bin/java 1 manual mode
    2 /usr/local/java/jre1.8.0_25/bin/java 1 manual mode
    java -version
    java version "1.8.0_25"
    Java(TM) SE Runtime Environment (build 1.8.0_25-b17)
    Java HotSpot(TM) 64-Bit Server VM (build 25.25-b02, mixed mode)
    tryed with both. but without success.
    I am still getting error:
    ./setup-1.4.4.14439.bin
    Preparing to install...
    Extracting the JRE from the installer archive...
    Unpacking the JRE...
    Extracting the installation resources from the installer archive...
    Configuring the installer for this system's environment...
    Launching installer...
    Graphical installers are not supported by the VM. The console mode will be used instead...
    Preparing CONSOLE Mode Installation...
    ===============================================================================
    Choose Locale...
    1- Deutsch
    ->2- English
    3- Español
    4- Français
    5- Italiano
    6- Nederlands
    7- Português (Brasil)
    8- Svenska
    CHOOSE LOCALE BY NUMBER: 2
    =======================================================
    Installer User Interface Mode Not Supported
    The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
    =======================================================
    Any help?
    Thanks!
    Solved!
    Go to Solution.

    Ok , i got this baby working.. sudo is not a problem here.. you need to specify additional java parameter for installer!
    ./setup-1.4.4.14439.bin LAX_VM /usr/bin/java

  • ICloud photo library and iPhone/iPad storage space

    Hi,
    I use iCloud photo library beta for some time and it's a great feature for apple product. However, I'm a bit worried about what happend after some time. Now I have 20Gb of storage in iCLoud and 16Gb iPhone 6 and iPad air 2. On both of them is the "optimize iPhone/iPad storage" checked. What will happen after I would put 20Gb of photos to the iCloud and the iPhone and iPad wouldn't have enough storage to handle them (even when the photos are optimize)?
    Thanks for any response or a link where it is discussed,
    Jakub

    Hi jakudo,
    "optimize iPad/iPhone storage" means that photos don't have to take any storage capacity of your devices, if you are using your devices storage capacity e.g. for other content like music, apps etc. Your photos will be stored in the cloud and only a some of them are stored locally as long as you have storage space available. The only thing you have to do, is upgrading for more storage as soon as your passing the 20 GB.
    With kind regards,
    David

  • Unable to start Storage Manager Engine on OES2SP3

    Hi,
    I just installed Storage Manager on a OES2SP3 x64 server and after what seems to be a correct installation, the Engine doesn't start.
    Does anyone if is there any undocumented dependency or something I should know to be able to start it?
    I've been also looking for some log file, but it seems that "/etc/init.d/nsmengined start" doesn leave any log.
    Any idea?
    Regards
    Jose Luis

    Jose Luis,
    Are you running anything else on the server that uses port 3009? Port
    conflict is one reason for the NSM Engine to shut itself down.
    Please send an email to storagemanager-at-novell.com so we can help you
    sort out this issue.
    thanks,
    NSM Development
    On 8/9/2011 1:06 PM, jlrodriguez wrote:
    >
    > Hi,
    >
    > I just installed Storage Manager on a OES2SP3 x64 server and after what
    > seems to be a correct installation, the Engine doesn't start.
    >
    > Does anyone if is there any undocumented dependency or something I
    > should know to be able to start it?
    >
    > I've been also looking for some log file, but it seems that
    > "/etc/init.d/nsmengined start" doesn leave any log.
    >
    > Any idea?
    >
    > Regards
    > Jose Luis
    >
    >

  • RMAN integrated with Tivoli Storage Manager

    Environment
    ===========
    Two Node RAC Production DBs on 10.2.0.4
    Platform : Solaris
    RMAN is the only backup tool i've ever worked with. I've come across OTN articles which discuss TSM along with RMAN. Is there any advantage at all in using TSM with RMAN ? Or, Is it just marketing gimmick by IBM?

    Our strategy:
    1--Monday ------------------->Level 0 backup  (1:00am)
    2--Tuesday----->     Level1
    3--Wednesday----->     Level1
    4--Thursday------------------>Level 0 backup  (1:00am)
    5--Friday----->     Level1
    6--Saturday----->     Level1
    0--Sunday ----->     Level1Our RMAN backup pieces got to an NFS mount . Every monday morning the Level 0 backup is copied to Tape by Sysadmins and kept for 3 months. So, where does Tivoli storage manager come into picture ? Does TSM do copying the backup pieces from Disk to Tape part ?

  • Oracle's 10gR2 Automated Storage Management implementation on CentOS 4.1

    Actually there are several nice articles on Oracle Technical Network
    devoted to the same topic. What’s new may be said ?
    The target of message is to highlight the optimal sequence of steps
    required to bring Oracle10g (10.2.0.1) ASM-database up on CentOS4.1 , placing ASM instance and serviced databases in different Oracle Homes.
    Oracleasm library install is done immediately after creating "oracle"
    linux account and "dba" group to be ready for ASM Instance creating during
    the first Installer run supposed to build it. ASM instance for disks and disk’s
    group management is created the first by Installer along with the disk’s group
    for database supposed to be built during the second run of Installer and to be
    placed into recently created disk’s group.
    I. Oracle 10gR2 ASM and ASMLib 2.0 I/O.
    1.Install CentOS 4.1
    2.Run as root:
    # groupadd dba # group of users to be granted SYSDBA system privilege
    # groupadd oinstall # group owner of Oracle files
    # useradd -c "Oracle software owner" -g oinstall -G dba oracle
    # passwd oracle
    # mkdir -p /u01/app/oracle
    # chown -R oracle.oinstall /u01
    # mkdir -p /u02/oradata/wtfdata
    # chown -R oracle.oinstall /u02
    OTN instruction:-
    Before installing Automatic Storage Management, it is recommended that you install the optional add-on Automatic Storage Management support library, ASMLib. ASMLib is an application program interface (API) Oracle that is aimed at simplifying the interface between the operating system and the database, and to exploit the capabilities and strengths of storage arrays provided by different vendors.ASMLib provides an alternative interface for the Automatic Storage Management-enabled kernel to discover and access block devices. It provides storage and operating system vendors the opportunity to supply extended storage-related features. These features provide benefits such as improved performance and greater data integrity.
    OTN instruction ends.
    3.To install ASMLIB 2.0 run as root:-
    # rpm -Uvh oracleasm-2.6.9-11.ELsmp-2.0.0-1.i686.rpm \
    oracleasmlib-2.0.0-1.i386.rpm \
    oracleasm-support-2.0.0-1.i386.rpm
    Now you get /etc/init.d/oracleasm ready to go.
    Configuring the Oracle ASM library driver:-
    # /etc/init.d/oracleasm configure
    Default user to own the driver interface [oracle]: oracle
    Default group to own the driver interface [dba]: dba
    Start Oracle ASM library driver on boot (y/n) [y]: y
    Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
    Writing Oracle ASM library driver configuration: [  OK  ]
    Scanning system for ASM disks: [  OK  ]
    # /etc/init.d/oracleasm enable
    Create ASM disks as desired utilizing command:
    # /etc/init.d/oracleasm createdisk VLM0X /dev/sdx
    Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login, /etc/profile.
    and oracle's shell environment as advised in [1].
    Login as oracle:-
    $ cd /tmp/database
    $./runInstaller
    OTN instructions:-
    It’s recommended that you install Automatic Storage Management in its own Oracle home, regardless of whether you plan to only have one or multiple database instances.Installing Automatic Storage Management in its own Oracle home helps ensure higher availability and manageability.
    With separate Oracle homes, you can upgrade Automatic Storage Management and databases independently, and you can remove database software without impacting the Automatic Storage Management instance. Ensure that the Automatic Storage Management version is the same or later than the Oracle Database version.If an Automatic Storage Management installation does not already exist and you select the Oracle Universal Installer option to install and configure Automatic Storage Management only, then Oracle Universal Installer installs Automatic Storage Management in its own Oracle home.
    OTN instruction ends.
    Select " Advanced installation" and
    create ASM instance in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1
    Create disk group during this run .
    Exit installer.
    $ ./runInstaller
    Select " Advanced installation" and create new ASM-database placed into existing disk's group
    in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_2 .
    Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
    Next:-
    $ sqlplus /nolog
    SQL> conn / as sysdba
    Connected.
    SQL> shutdown immediate;
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup mount;
    ORACLE instance started.
    Total System Global Area 285212672 bytes
    Fixed Size 1218968 bytes
    Variable Size 88082024 bytes
    Database Buffers 188743680 bytes
    Redo Buffers 7168000 bytes
    Database mounted.
    SQL> alter database archivelog;
    Database altered.
    SQL> alter database MastDB flashback on;
    Database altered.
    SQL> alter database open;
    Database altered.
    Open Enterpise Manager console.(Enterprise Manager 10g Database Control URL
    http://ServerCentOS41:1158/em). Create new disk's group for flashback recovery area and modify corresponding value on Recovery Settings page of EM.
    System startup in this case should look like:-
    [oracle@ServerCentOS41 ~]$ ./lsnrstart
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:41
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    Start Date 30-AUG-2005 17:57:42
    Uptime 0 days 0 hr. 0 min. 0 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:42
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting /u01/app/oracle/product/10.2.0/db_2/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    System parameter file is /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
    Log messages written to /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1522)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    Start Date 30-AUG-2005 17:57:42
    Uptime 0 days 0 hr. 0 min. 0 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
    Listener Log File /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    [oracle@ServerCentOS41 ~]$ dbstart
    Processing ASM instance "+ASM": log file /u01/app/oracle/product/10.2.0/db_1/startup.log
    Processing Database instance "MastDB": log file /u01/app/oracle/product/10.2.0/db_2/startup.log
    [oracle@ServerCentOS41 ~]$ emctl start dbconsole
    TZ set to US/Eastern
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    http://ServerCentOS41:1158/em/console/aboutApplication
    Starting Oracle Enterprise Manager 10g Database Control ........................ started.
    Logs are generated in directory /u01/app/oracle/oracle/product/10.2.0/db_2/ServerCentOS41_MastDB/sysman/log
    Install described above was done with different Oracle Homes
    for ASM instance and ASM-database.
    To put ASM instance and ASM-database in same Oracle Home.
    Start runInstaller just once to build all stuff at a time.
    Login as oracle:-
    $ cd /tmp/database
    $./runInstaller
    Select " Advanced option" and install "Software only"
    in ORACLE_HOME - /u01/app/oracle/oracle/product/10.2.0/db_1.
    Modify oracle's .bash_profile:-
    export ORACLE_HOME and new PATH.
    Source new .bash_profile:-
    $. ~oracle/.bash_profile
    $dbca
    During this run the request to start CRS daemons by root will come up.
    # $ORACLE_HOME/bin/localconfig add
    ASM instance , needed disk's groups and ASM-database itself will be created.
    Then perform listener and local TNS names configuration.
    $netca
    II. Oracle 10gR2 ASM and Standard Linux I/O.
    This method creates Oracle database files on raw character devices managed by ASM
    using standard Linux I/O system calls.It requires to create RAW devices for all
    disk partitions used by ASM.
    1.Install CentOS 4.1
    2.Run as root:
    # groupadd dba # group of users to be granted SYSDBA system privilege
    # groupadd oinstall # group owner of Oracle files
    # useradd -c "Oracle software owner" -g oinstall -G dba oracle
    # passwd oracle
    # mkdir -p /u01/app/oracle
    # chown -R oracle.oinstall /u01
    # mkdir -p /u02/oradata/data
    # chown -R oracle.oinstall /u02
    Just as an example create 4 partitions:
    /dev/hda6,/dev/hdc6 5 GB each one
    /dev/hda7,/dev/hdc7 3 GB each one
    Create raw devices modifying file /etc/sysconfig/rawdevices as follows:
    /dev/raw/raw1 /dev/hda6
    /dev/raw/raw2 /dev/hdc6
    /dev/raw/raw3 /dev/hda7
    /dev/raw/raw4 /dev/hdc7
    Put in /etc/rc.d/rc.local
    chown oracle:dba /dev/raw/raw*
    chmod 660 /dev/raw/raw*
    I was experiencing problems with loosing "oracle:dba" permissions after Linux
    reboot. Oracle's raw device came up with "root:disk" ownership after reboot.
    Restart Linux
    Run as root:-
    # service rawdevices restart
    Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login,
    /etc/profile and oracle's shell environment as advised in [1].
    Login as oracle:-
    $ cd /tmp/database
    $./runInstaller
    Select " Advanced installation" and
    create ASM instance in ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/asm
    During this run create diskgroup RAWDATA1 with normal redundancy
    mirroring /dev/raw/raw1 and /dev/raw/raw2.
    You should be fine with discovering raw devices if permissions are in place (oracle:dba)
    Exit installer.
    Export ORACLE_HOME for ASM instance and corresponding PATH.
    Then run "dbca" to create diskgroup RAWDATA2 with
    normal redundancy mirroring /dev/raw/raw3 and /dev/raw/raw4
    $ ./runInstaller
    Select " Advanced installation" and create new ASM-database placed RAWDATA1 diskgroup
    in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1.
    Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
    Next:-
    $ sqlplus /nolog
    SQL> conn / as sysdba
    Connected.
    SQL> shutdown immediate;
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup mount;
    ORACLE instance started.
    Total System Global Area 285212672 bytes
    Fixed Size 1218968 bytes
    Variable Size 88082024 bytes
    Database Buffers 188743680 bytes
    Redo Buffers 7168000 bytes
    Database mounted.
    SQL> alter database archivelog;
    Database altered.
    SQL> alter database rawdbs flashback on;
    Database altered.
    SQL> alter database open;
    Database altered.
    Open Enterpise Manager console.(Enterprise Manager 10g Database Control
    URL http://ServerCentOS41:1158/em). Put flashback recovery area in RAWDATA2
    modifying corresponding value on Recovery Settings page of EM.
    References.
    1.www.puschitz.com/InstallingOracle10g.shtml

    [oracle@casa database]$ df -k
    Filesystem 1K-blocks Used Available Use% Mounted on
    /dev/hda2 70557084 8674712 58298272 13% /
    none 387852 0 387852 0% /dev/shm
    /dev/hdc 656964 656964 0 100% /media/cdrecorder1So, you have 58298272 bytes available, which is 55MB, and the installer asks for 60 ;) You should probably use df -h instead of df -k...
    PS where are you planning to install to with only 55MB available anyway?
    ~Jer

  • Oracle 10gR2 Automated Storage Management implementation on CentOS 4.1

    Actually there are several nice articles on Oracle Technical Network devoted to the same topic. What’s new may be said ?
    The target of this message is to highlight the optimal sequence of steps required to bring Oracle10g (10.2.0.1) ASM-database up on CentOS4.1 , placing ASM instance and serviced databases in different Oracle Homes.Oracleasm library install is done immediately after creating "oracle" linux account and "dba" group to be ready for ASM Instance creating during the first Installer run supposed to build it. ASM instance for disks and disk’s group management is created the first by Installer along with the disk’s group for database supposed to be built during the second run of Installer and to be placed into recently created disk’s group.
    I. Oracle 10gR2 ASM and ASMLib 2.0 I/O.
    1.Install CentOS 4.1
    2.Run as root:
    # groupadd dba # group of users to be granted SYSDBA system privilege
    # groupadd oinstall # group owner of Oracle files
    # useradd -c "Oracle software owner" -g oinstall -G dba oracle
    # passwd oracle
    # mkdir -p /u01/app/oracle
    # chown -R oracle.oinstall /u01
    # mkdir -p /u02/oradata/wtfdata
    # chown -R oracle.oinstall /u02
    OTN instruction:-
    Before installing Automatic Storage Management, it is recommended that you install the optional add-on Automatic Storage Management support library, ASMLib. ASMLib is an application program interface (API) Oracle that is aimed at simplifying the interface between the operating system and the database, and to exploit the capabilities and strengths of storage arrays provided by different vendors ASMLib provides an alternative interface for the Automatic Storage Management-enabled kernel to discover and access block devices. It provides storage and operating system vendors the opportunity to supply extended storage-related features. These features provide benefits such as improved performance and greater data integrity.
    OTN instruction ends.
    3.To install ASMLIB 2.0 run as root:-
    # rpm -Uvh oracleasm-2.6.9-11.ELsmp-2.0.0-1.i686.rpm \
    oracleasmlib-2.0.0-1.i386.rpm \
    oracleasm-support-2.0.0-1.i386.rpm
    Now you get /etc/init.d/oracleasm ready to go.
    Configuring the Oracle ASM library driver:-
    # /etc/init.d/oracleasm configure
    Default user to own the driver interface [oracle]: oracle
    Default group to own the driver interface [dba]: dba
    Start Oracle ASM library driver on boot (y/n) [y]: y
    Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
    Writing Oracle ASM library driver configuration: [  OK  ]
    Scanning system for ASM disks: [  OK  ]
    # /etc/init.d/oracleasm enable
    Create ASM disks as desired utilizing command:
    # /etc/init.d/oracleasm createdisk VLM0X /dev/sdx
    Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login, /etc/profile.
    and oracle's shell environment as advised in [1].
    Login as oracle:-
    $ cd /tmp/database
    $./runInstaller
    OTN instructions:-
    It’s recommended that you install Automatic Storage Management in its own Oracle home, regardless of whether you plan to only have one or multiple database instances.Installing Automatic Storage Management in its own Oracle home helps ensure higher availability and manageability.With separate Oracle homes, you can upgrade Automatic Storage Management and databases independently, and you can remove database software without impacting the Automatic Storage Management instance. Ensure that the Automatic Storage Management version is the same or later than the Oracle Database version.If an Automatic Storage Management installation does not already exist and you select the Oracle Universal Installer option to install and configure Automatic Storage Management only, then Oracle Universal Installer installs Automatic Storage Management in its own Oracle home.
    OTN instruction ends.
    Select " Advanced installation" and
    create ASM instance in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1
    Create disk group during this run .
    Exit installer.
    $ ./runInstaller
    Select " Advanced installation" and create new ASM-database placed into existing disk's group in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_2 .
    Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
    Next:-
    $ sqlplus /nolog
    SQL> conn / as sysdba
    Connected.
    SQL> shutdown immediate;
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup mount;
    ORACLE instance started.
    Total System Global Area 285212672 bytes
    Fixed Size 1218968 bytes
    Variable Size 88082024 bytes
    Database Buffers 188743680 bytes
    Redo Buffers 7168000 bytes
    Database mounted.
    SQL> alter database archivelog;
    Database altered.
    SQL> alter database MastDB flashback on;
    Database altered.
    SQL> alter database open;
    Database altered.
    Open Enterpise Manager console.(Enterprise Manager 10g Database Control URL
    http://ServerCentOS41:1158/em). Create new disk's group for flashback recovery area and modify corresponding value on Recovery Settings page of EM.
    System startup in this case should look like:-
    [oracle@ServerCentOS41 ~]$ ./lsnrstart
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:41
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    Start Date 30-AUG-2005 17:57:42
    Uptime 0 days 0 hr. 0 min. 0 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:42
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting /u01/app/oracle/product/10.2.0/db_2/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    System parameter file is /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
    Log messages written to /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1522)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    Start Date 30-AUG-2005 17:57:42
    Uptime 0 days 0 hr. 0 min. 0 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
    Listener Log File /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    [oracle@ServerCentOS41 ~]$ dbstart
    Processing ASM instance "+ASM": log file /u01/app/oracle/product/10.2.0/db_1/startup.log
    Processing Database instance "MastDB": log file /u01/app/oracle/product/10.2.0/db_2/startup.log
    [oracle@ServerCentOS41 ~]$ emctl start dbconsole
    TZ set to US/Eastern
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    http://ServerCentOS41:1158/em/console/aboutApplication
    Starting Oracle Enterprise Manager 10g Database Control ........................ started.
    Logs are generated in directory /u01/app/oracle/oracle/product/10.2.0/db_2/ServerCentOS41_MastDB/sysman/log
    Install described above was done with different Oracle Homes
    for ASM instance and ASM-database.
    To put ASM instance and ASM-database in same Oracle Home.
    Start runInstaller just once to build all stuff at a time.
    Login as oracle:-
    $ cd /tmp/database
    $./runInstaller
    Select " Advanced option" and install "Software only"
    in ORACLE_HOME - /u01/app/oracle/oracle/product/10.2.0/db_1.
    Modify oracle's .bash_profile:-
    export ORACLE_HOME and new PATH.
    Source new .bash_profile:-
    $. ~oracle/.bash_profile
    $dbca
    During this run the request to start CRS daemons by root will come up.
    # $ORACLE_HOME/bin/localconfig add
    ASM instance , needed disk's groups and ASM-database itself will be created.
    Then perform listener and local TNS names configuration.
    $netca
    II. Oracle 10gR2 ASM and Standard Linux I/O.
    This method creates Oracle database files on raw character devices managed by ASM using standard Linux I/O system calls.It requires to create RAW devices for all disk partitions used by ASM.
    1.Install CentOS 4.1
    2.Run as root:
    # groupadd dba # group of users to be granted SYSDBA system privilege
    # groupadd oinstall # group owner of Oracle files
    # useradd -c "Oracle software owner" -g oinstall -G dba oracle
    # passwd oracle
    # mkdir -p /u01/app/oracle
    # chown -R oracle.oinstall /u01
    # mkdir -p /u02/oradata/data
    # chown -R oracle.oinstall /u02
    Just as an example create 4 partitions:
    /dev/hda6,/dev/hdc6 5 GB each one
    /dev/hda7,/dev/hdc7 3 GB each one
    Create raw devices modifying file /etc/sysconfig/rawdevices as follows:
    /dev/raw/raw1 /dev/hda6
    /dev/raw/raw2 /dev/hdc6
    /dev/raw/raw3 /dev/hda7
    /dev/raw/raw4 /dev/hdc7
    Put in /etc/rc.d/rc.local
    chown oracle:dba /dev/raw/raw*
    chmod 660 /dev/raw/raw*
    I was experiencing problems with loosing "oracle:dba" permissions after Linux
    reboot. Oracle's raw device came up with "root:disk" ownership after reboot.
    Restart Linux
    Run as root:-
    # service rawdevices restart
    Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login,
    /etc/profile and oracle's shell environment as advised in [1].
    Login as oracle:-
    $ cd /tmp/database
    $./runInstaller
    Select " Advanced installation" and
    create ASM instance in ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/asm
    During this run create diskgroup RAWDATA1 with normal redundancy
    mirroring /dev/raw/raw1 and /dev/raw/raw2.
    You should be fine with discovering raw devices if permissions are in place (oracle:dba)
    Exit installer.
    Export ORACLE_HOME for ASM instance and corresponding PATH.
    Then run "dbca" to create diskgroup RAWDATA2 with
    normal redundancy mirroring /dev/raw/raw3 and /dev/raw/raw4
    $ ./runInstaller
    Select " Advanced installation" and create new ASM-database placed RAWDATA1 diskgroup
    in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1.
    Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
    Next:-
    $ sqlplus /nolog
    SQL> conn / as sysdba
    Connected.
    SQL> shutdown immediate;
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup mount;
    ORACLE instance started.
    Total System Global Area 285212672 bytes
    Fixed Size 1218968 bytes
    Variable Size 88082024 bytes
    Database Buffers 188743680 bytes
    Redo Buffers 7168000 bytes
    Database mounted.
    SQL> alter database archivelog;
    Database altered.
    SQL> alter database rawdbs flashback on;
    Database altered.
    SQL> alter database open;
    Database altered.
    Open Enterpise Manager console.(Enterprise Manager 10g Database Control
    URL http://ServerCentOS41:1158/em). Put flashback recovery area in RAWDATA2
    modifying corresponding value on Recovery Settings page of EM.
    References.
    1.www.puschitz.com/InstallingOracle10g.shtml
    Message was edited by:
    [email protected]

    Actually there are several nice articles on Oracle Technical Network devoted to the same topic. What’s new may be said ?
    The target of this message is to highlight the optimal sequence of steps required to bring Oracle10g (10.2.0.1) ASM-database up on CentOS4.1 , placing ASM instance and serviced databases in different Oracle Homes.Oracleasm library install is done immediately after creating "oracle" linux account and "dba" group to be ready for ASM Instance creating during the first Installer run supposed to build it. ASM instance for disks and disk’s group management is created the first by Installer along with the disk’s group for database supposed to be built during the second run of Installer and to be placed into recently created disk’s group.
    I. Oracle 10gR2 ASM and ASMLib 2.0 I/O.
    1.Install CentOS 4.1
    2.Run as root:
    # groupadd dba # group of users to be granted SYSDBA system privilege
    # groupadd oinstall # group owner of Oracle files
    # useradd -c "Oracle software owner" -g oinstall -G dba oracle
    # passwd oracle
    # mkdir -p /u01/app/oracle
    # chown -R oracle.oinstall /u01
    # mkdir -p /u02/oradata/wtfdata
    # chown -R oracle.oinstall /u02
    OTN instruction:-
    Before installing Automatic Storage Management, it is recommended that you install the optional add-on Automatic Storage Management support library, ASMLib. ASMLib is an application program interface (API) Oracle that is aimed at simplifying the interface between the operating system and the database, and to exploit the capabilities and strengths of storage arrays provided by different vendors ASMLib provides an alternative interface for the Automatic Storage Management-enabled kernel to discover and access block devices. It provides storage and operating system vendors the opportunity to supply extended storage-related features. These features provide benefits such as improved performance and greater data integrity.
    OTN instruction ends.
    3.To install ASMLIB 2.0 run as root:-
    # rpm -Uvh oracleasm-2.6.9-11.ELsmp-2.0.0-1.i686.rpm \
    oracleasmlib-2.0.0-1.i386.rpm \
    oracleasm-support-2.0.0-1.i386.rpm
    Now you get /etc/init.d/oracleasm ready to go.
    Configuring the Oracle ASM library driver:-
    # /etc/init.d/oracleasm configure
    Default user to own the driver interface [oracle]: oracle
    Default group to own the driver interface [dba]: dba
    Start Oracle ASM library driver on boot (y/n) [y]: y
    Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
    Writing Oracle ASM library driver configuration: [  OK  ]
    Scanning system for ASM disks: [  OK  ]
    # /etc/init.d/oracleasm enable
    Create ASM disks as desired utilizing command:
    # /etc/init.d/oracleasm createdisk VLM0X /dev/sdx
    Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login, /etc/profile.
    and oracle's shell environment as advised in [1].
    Login as oracle:-
    $ cd /tmp/database
    $./runInstaller
    OTN instructions:-
    It’s recommended that you install Automatic Storage Management in its own Oracle home, regardless of whether you plan to only have one or multiple database instances.Installing Automatic Storage Management in its own Oracle home helps ensure higher availability and manageability.With separate Oracle homes, you can upgrade Automatic Storage Management and databases independently, and you can remove database software without impacting the Automatic Storage Management instance. Ensure that the Automatic Storage Management version is the same or later than the Oracle Database version.If an Automatic Storage Management installation does not already exist and you select the Oracle Universal Installer option to install and configure Automatic Storage Management only, then Oracle Universal Installer installs Automatic Storage Management in its own Oracle home.
    OTN instruction ends.
    Select " Advanced installation" and
    create ASM instance in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1
    Create disk group during this run .
    Exit installer.
    $ ./runInstaller
    Select " Advanced installation" and create new ASM-database placed into existing disk's group in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_2 .
    Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
    Next:-
    $ sqlplus /nolog
    SQL> conn / as sysdba
    Connected.
    SQL> shutdown immediate;
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup mount;
    ORACLE instance started.
    Total System Global Area 285212672 bytes
    Fixed Size 1218968 bytes
    Variable Size 88082024 bytes
    Database Buffers 188743680 bytes
    Redo Buffers 7168000 bytes
    Database mounted.
    SQL> alter database archivelog;
    Database altered.
    SQL> alter database MastDB flashback on;
    Database altered.
    SQL> alter database open;
    Database altered.
    Open Enterpise Manager console.(Enterprise Manager 10g Database Control URL
    http://ServerCentOS41:1158/em). Create new disk's group for flashback recovery area and modify corresponding value on Recovery Settings page of EM.
    System startup in this case should look like:-
    [oracle@ServerCentOS41 ~]$ ./lsnrstart
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:41
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    Start Date 30-AUG-2005 17:57:42
    Uptime 0 days 0 hr. 0 min. 0 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:42
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting /u01/app/oracle/product/10.2.0/db_2/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    System parameter file is /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
    Log messages written to /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1522)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    Start Date 30-AUG-2005 17:57:42
    Uptime 0 days 0 hr. 0 min. 0 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
    Listener Log File /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    [oracle@ServerCentOS41 ~]$ dbstart
    Processing ASM instance "+ASM": log file /u01/app/oracle/product/10.2.0/db_1/startup.log
    Processing Database instance "MastDB": log file /u01/app/oracle/product/10.2.0/db_2/startup.log
    [oracle@ServerCentOS41 ~]$ emctl start dbconsole
    TZ set to US/Eastern
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    http://ServerCentOS41:1158/em/console/aboutApplication
    Starting Oracle Enterprise Manager 10g Database Control ........................ started.
    Logs are generated in directory /u01/app/oracle/oracle/product/10.2.0/db_2/ServerCentOS41_MastDB/sysman/log
    Install described above was done with different Oracle Homes
    for ASM instance and ASM-database.
    To put ASM instance and ASM-database in same Oracle Home.
    Start runInstaller just once to build all stuff at a time.
    Login as oracle:-
    $ cd /tmp/database
    $./runInstaller
    Select " Advanced option" and install "Software only"
    in ORACLE_HOME - /u01/app/oracle/oracle/product/10.2.0/db_1.
    Modify oracle's .bash_profile:-
    export ORACLE_HOME and new PATH.
    Source new .bash_profile:-
    $. ~oracle/.bash_profile
    $dbca
    During this run the request to start CRS daemons by root will come up.
    # $ORACLE_HOME/bin/localconfig add
    ASM instance , needed disk's groups and ASM-database itself will be created.
    Then perform listener and local TNS names configuration.
    $netca
    II. Oracle 10gR2 ASM and Standard Linux I/O.
    This method creates Oracle database files on raw character devices managed by ASM using standard Linux I/O system calls.It requires to create RAW devices for all disk partitions used by ASM.
    1.Install CentOS 4.1
    2.Run as root:
    # groupadd dba # group of users to be granted SYSDBA system privilege
    # groupadd oinstall # group owner of Oracle files
    # useradd -c "Oracle software owner" -g oinstall -G dba oracle
    # passwd oracle
    # mkdir -p /u01/app/oracle
    # chown -R oracle.oinstall /u01
    # mkdir -p /u02/oradata/data
    # chown -R oracle.oinstall /u02
    Just as an example create 4 partitions:
    /dev/hda6,/dev/hdc6 5 GB each one
    /dev/hda7,/dev/hdc7 3 GB each one
    Create raw devices modifying file /etc/sysconfig/rawdevices as follows:
    /dev/raw/raw1 /dev/hda6
    /dev/raw/raw2 /dev/hdc6
    /dev/raw/raw3 /dev/hda7
    /dev/raw/raw4 /dev/hdc7
    Put in /etc/rc.d/rc.local
    chown oracle:dba /dev/raw/raw*
    chmod 660 /dev/raw/raw*
    I was experiencing problems with loosing "oracle:dba" permissions after Linux
    reboot. Oracle's raw device came up with "root:disk" ownership after reboot.
    Restart Linux
    Run as root:-
    # service rawdevices restart
    Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login,
    /etc/profile and oracle's shell environment as advised in [1].
    Login as oracle:-
    $ cd /tmp/database
    $./runInstaller
    Select " Advanced installation" and
    create ASM instance in ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/asm
    During this run create diskgroup RAWDATA1 with normal redundancy
    mirroring /dev/raw/raw1 and /dev/raw/raw2.
    You should be fine with discovering raw devices if permissions are in place (oracle:dba)
    Exit installer.
    Export ORACLE_HOME for ASM instance and corresponding PATH.
    Then run "dbca" to create diskgroup RAWDATA2 with
    normal redundancy mirroring /dev/raw/raw3 and /dev/raw/raw4
    $ ./runInstaller
    Select " Advanced installation" and create new ASM-database placed RAWDATA1 diskgroup
    in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1.
    Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
    Next:-
    $ sqlplus /nolog
    SQL> conn / as sysdba
    Connected.
    SQL> shutdown immediate;
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup mount;
    ORACLE instance started.
    Total System Global Area 285212672 bytes
    Fixed Size 1218968 bytes
    Variable Size 88082024 bytes
    Database Buffers 188743680 bytes
    Redo Buffers 7168000 bytes
    Database mounted.
    SQL> alter database archivelog;
    Database altered.
    SQL> alter database rawdbs flashback on;
    Database altered.
    SQL> alter database open;
    Database altered.
    Open Enterpise Manager console.(Enterprise Manager 10g Database Control
    URL http://ServerCentOS41:1158/em). Put flashback recovery area in RAWDATA2
    modifying corresponding value on Recovery Settings page of EM.
    References.
    1.www.puschitz.com/InstallingOracle10g.shtml
    Message was edited by:
    [email protected]

  • Very disappointing why do I need a camera on my iPad to manage edit photos in new iPhoto app?

    Very disappointing why do I need a camera on my iPad to manage edit photos in new iPhoto app?

    That's just a visual differentiator so folks can easily tell if it will run on their machine. The difference is the RAM and processor in the iPad 2 and iPad (New). The camera has nothing to do with the physical requirements.

Maybe you are looking for