Ipad stuck in apple logo reboot loop to home page and then goes off

my ipad2 stuck in apple logo to home page rebooting loop and cant charge to 100%

Mine is doing the same thing and won't charge.  It stays at 2%....this happened suddenly.

Similar Messages

  • IPhone 4s stuck in apple logo reboot loop

    I have an Iphone 4s, iOS 7.0.2 ,two days ago it hanged with newshunt apps after that i switch off my mobile but then it went into the apple logo reboot loop.  I conected it up to my PC, and and the phone stayed in the reboot loop. I had to force my phone into recovery mode ,PC recognized it. I click "restore Iphone" and the process starts. get the following screens
    last i got the following message
    In my iphone screen, completed one loading bar But after that it brings up the Apple logo reboot loop, Please help

    I also discovered that If I push it to DFU and then use Recboot to exit it it will show 4 lines from the console over the logo and than screen turns black until the battery will die.

  • HT1296 iPad stuck on Apple logo after trying to reset, how do I fix

    iPad stuck on Apple logo after resetting how do I fix?

    Hi..
    Follow the instructions here >  Apple - Support - iPad - iPad Troubleshooting Assistant

  • Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error ,

    Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error , i try to restore with itunes restore mode and throws me error!, could anyone help? I'm going crazy!. Thank you!
    This is the mistake That I get up the logo and then reboots iphone and Continues to Appear;
    (NAND) _findflashmediaandkeepout: 601 physical nand block offset 1
    (NAND) start: 356 this 0x96959400 PROVIDER = 0x96b1de80 falshmedia = 0x96b1de80
    (NAND) WMR_Start: 149 apple PNN  NAND Driver, Read / Write
    (NAND) WMR_Start: 174 FIL_INT (OK)
    (NAND) WMR_open :371 vfl_open (ok)
    (NAND) s_cxt_boot:88 sftl: error, unclean shutdown; adopted 7775 spans
    (NAND) WMR_open:420 FTL_open      (ok)
    (NAND)_publishServices:642 FTL capabilities: 0x00000001
    (NAND)_ppnvflGetStruct:3469 checking borrowed blocks-count:23 max_count:23
    (NAND)_fetchBorrowedList:881 number of borrowed blocks 16

    Hi Guys!
    I'm German, so my english writing might not be perfect
    I had the same Issue on a 5 i bought. Exact same screen and writing. Battery was totally drawn, first thing I had to replace. The screen had been replaced and since then it wouldn't work anymore according to the previous owner.
    It took me a couple hours, after recieving a few errors like 4013 it just never completed the restore, got really hot as well. The Flexwire of the Dock Connector seemed damaged, replaced the dock, but that didn't help.
    I almost gave up, thought the Logic Board was bad.
    BUT! Then i deceided to check if it has anything to do with the Screen assembly, and it did.
    Long story short, on mine the front facing camera, and sensor assy were bad.
    Anyhow, the phone works ''perfect'' when i leave them unplugged. So I just ordered a new one and we will see if thats the problem or if the damage is in the Logic Board.
    If so, i can live without the sensor and front cam.
    Just wanted to share, good luck everyone.

  • Just upgraded to latest iOS and my iPad does not come back up.  It displays a line to an iTunes logo and then goes off and after some minutes comes back on.  I cannot reset it or anything else.

    Just upgraded to latest iOS and my iPad does not come back up - the following appeared as the first thing after turning back on.  It displays a line from the power/USB connector to an iTunes logo and then goes off and after some minutes comes back on.  I cannot reset it or anything else.  It is completely non-functional.

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom

  • Hellow my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry

    hellow
    my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry on.plz help me how it witt work starting.i urgently need to on my i pod.plz help me plzzzzzzzzzzzzzzzz

    Hi there shehla sattar,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPad: Basic troubleshooting
    http://support.apple.com/kb/ts3274
    -Griff W.

  • There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

    There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

    Nah - that's just the normal boot process.
    Clinton

  • My iphone wont turn on, it keeps loading for the longest time and then the apple logo appears for about 10 seconds and then glitches to the color blue and repeats.What do i do?

    My iphone wont turn on, it keeps loading for the longest time and then the apple logo appears for about 10 seconds and then glitches to the color blue and repeats.What do i do?

    Hi there e12345,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    -Griff W. 

  • Iphone 4 will not start up...the apple icon comes on and then goes off and then comes on and goes off again continuously....any ideas?

    Iphone 4 will not start up....the apple icon comes on and then goes off and then comes on and then goes off continuously....any ideas?

    1. Try doing a hard reset:
    Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
    2. If that doesn't solve it, use: http://support.apple.com/kb/HT1808
    Using this article will erase everything on the device, so make sure you have a backup!
    If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
    Good luck
    JW
    Message was edited by: jesterwylde

  • My Ipod is messed up. Every time i click the top button it just flashes the apple sign for like 5 seconds and then goes off and just continues to do that. help?

    My Ipod is messed up. Every time i click the top button it just flashes the apple sign for like 5 seconds and then goes off and just continues to do that.Can someone please help?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • IPod 2007 160GB Classic Stuck on Apple Logo Reboot?

    Hello Hopefully somebody can help?
    I have a iPod 2007 160GB Classic which is stuck on the apple logo reboot? I have tried everything posted on the similar topic below without success although I'm a windows user and not mac:-
    https://discussions.apple.com/thread/2609298?tstart=0
    My Hard Drive Smart Data is:-
    Retracts: 336
    Reallocs: 6
    Pending Sectors: 4
    PowerOn Hours: 454
    Start/Stops: 2285
    Temp: Current 27c
    Temp: Min 0c
    Temp: Max 53c
    I cannot restore, format even using HPUSBDISK?
    Is it saveable or do I need a new hard drive?

    I received mine today. Mine was Macintosh formatted already. No problems when I first connected. It took quite some time to sync my music library, but it completed successfully, with 13GB free. I 'ejected' the iPod, and I've spent a few minutes playing songs, trying the menus. No problems so far. Others have commented that the software is slow. I've not noticed any differences between 5G and the Classic. When you play a song it spends a second or so accessing the hard drive before playing the song, as my previous iPods have (most of my music is Lossless). There are images/icons on the right side of the screen in the settings section that appear after a slight delay when moving down through the menu - this perhaps gives the impression of feeling sluggish but it actually doesn't affect performance - you can scroll through the menu as quickly as you like, the sluggishness of the icons appearing is only cosmetic.
    From my point of view, I'm pleased to say I've had none of the problems of it getting stuck on the Apple logo. When I first connected to the computer the Apple logo appeared for a moment, but then it changed to the 'syncing' circle animation and I've not seen the Apple logo screen since.
    I think if yours keeps having the problem then I'd get a replacement. I'll certainly report back if I start getting problems - but so far it seems that everything is fine.
    One last comment - I hadn't realised quite how different the software is. All of the menus, and the information displayed, the moving album art on the right side of the screen, the fact it shows how many songs are in each playlist etc is all very different to the 5G. The software on the classic is a very significant upgrade from the 5G - at first glance anyway.

  • Help ! my ipad stuck on apple logo, and Error 21

    Dear,
    i got trouble with my ipad 3 global Ios 5.11... and somehow i accidently delete mu cydia since then i tried to restore it via itunes.. and when tried to update with ios 6 n finished, it stuck on apple logo and when i try to restore via itunes, it comes with the an error (21)..
    please lets me know since im getting desperate...
    thanks

    Your post indicates you have used Cydia, which is a software application for iOS that enables a user to find and install software packages on jailbroken iOS Apple devices. Since your iPad has been jailbroken,  we can't help you in this forum. Best bet is to Google for answers.
    You may have "bricked" your iPad and now have an $$$ paper weight. Plus your Apple warranty has been voided and the Apple Genius Bar/Support will not help you.
     Cheers, Tom

  • HT1212 ipad stuck at apple logo

    my ipad is stucked on apple logo. i tried hard resetting and holding the volume up button and still doesnt work. my ipad mini cant connect to itunes bcs i have my passcode on. please reply ASAP.

    Try to connect in recovery mode, explained here:iOS: Unable to update or restore

  • 1st gen ipad stuck on apple logo only when on charge

    I have an iPad that got wet in the rain, when I brought it in it still worked ( i pressed the home button and the homepage came up with all the apps) so I quickly dried if off and put it in the airing cupboard for 6 days, now when I plug it in to the mains with the charger the apple logo comes up for about 15 secs then disappears then comes back on after about another 30 secs and this keeps happening and won't go any further and when I unplug it and link it to my apple laptop nothing happens at all it nothing happens at all (doent show the apple logo or charging logo)  i dont think its taking any charge please let me know if anyone knows how to fix x

    Bluequasar-
    There is a way to force the iPad into recovery mode.  See <this article>
    Fred

  • TS3694 Ipad2 stuck on apple logo rebooting

    Hi anybody out there. I have an Ipad2 that is stuck on the apple logo. It is contnueosly rebooting, but stuck. I took it into one of those youbreakifx stores and the kid told me that it is due to jailbroken issue. I explained that it was not jailbroken and he gave me a sarcastic look. I actually recently reinstalled the operating system on a my friend's tablet which was jailbroken, however never did jailbreak my ipad. What to do?

    Go to the iPad forum. This is the iPhone forum. Or take it to an Apple store or authorized Apple service provider. As far as I know youbreakfx is not authorized Apple service center.

Maybe you are looking for

  • How do I solve this?

    I am using java for the first time and my new pc cannot compile programs written in java language. It always read "'javac' is not recorgnized as an internal or external command, opperable program or batch file". The following information may be helpf

  • BackUp graphical mapping in PI 7.1

    Hi every one, I am trying to save .mte of an existing graphical map in PI 7.1. I could do it in PI 7.0 using - key combination of - CTRL + SHIFT + Right click - when I select "Export" - it would prompt for File Save option - to save .mte file on the

  • Importing as PAL not NTSC

    When I import into iMovie HD 6 from file (these are .3gp files from my phone) as a new project, it gets created as DV-NTSC and I can't see a preference setting to choose PAL instead. I can export using Export > Expert Settings > Share > DV Stream and

  • How do I make a Pages Doc a jpg?

    I used to be able to press "Save As" but all of a sudden I noticed that option is gone. I could Print and "Save as" a jpg, and that option is gone also. I am not sure if a new softward update took that option away, but I can no longer convert Pages D

  • ACS not authorising Security Manager devices

    Hi I have a setup ACS 4.1 CS-Manager 3.2.2 I have intergrated the CS-Manager into ACS with no problems. However when I try to add devices into the CS-Manager I get the message "The Device is not in the Cisco Secure ACS" I have one wildcard entry enco