IPad stuck in "canceling sync" after downloading 2.1

After downloading the 2.1 version of the software for iPad, the iPod function is stuck in "canceling sync." I have read everything I can find on here and it seems the answer is to sync with iTunes on my computer. Unfortunately, when I try to do that, I get the response:
This iPad cannot be used because the required software is not
installed. Run the iTunes installer to remove iTunes, then install
the 64-bit version of iTunes.
I already had the 64-bit version of iTunes loaded but I deleted it and reloaded it again. I reset the iPad, reset my computer but still can't sync.
HELP!!!

Hi ...
Could be your USB connection. Follow the instructions here.
http://support.apple.com/kb/TS1286
If that isn't the issue, follow the instructions here for Setting up your iPad as a new device
Carolyn

Similar Messages

  • Ipad stuck in recovery mode after accidentally unplugging it while updating

    ipad stuck in recovery mode after accidentally unplugging it while updating to ios 4.2 . and when trying to restore it back it wont restore, restroing error code is 6 what to do ?

    I'm not sure what you can do at this point.  If I had been in your shoes, I would have kept the pics in the camera's SD cards until my return home.
    I'm really reluctant to suggest this but, at this point, you probably can't lose.  Do a "Restore."  Be forewarned that it could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    Edit...
    I just took a peek at the TinyUmbrella FAQs.  Your device has been jailbroke and that's likely the reason why the problem occurred to begin with.  Contact the jailbreaker for assistance.  Neither Apple nor anyone on the forum can help you as we do not know the characteristics of your device.

  • HT1296 iPad stuck on Apple logo after trying to reset, how do I fix

    iPad stuck on Apple logo after resetting how do I fix?

    Hi..
    Follow the instructions here >  Apple - Support - iPad - iPad Troubleshooting Assistant

  • HT201210 iphone 5 is stuck in recovery mode after downloading new apple software, does anyone know how to fix this ?

    My iphone 5 is stuck in recovery mode after downloading new apple software, does anyone know how to fix this I keep getting error message 3014 ?

    i dont know but you went through all of this
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • Why is my iPad stuck in recovery mode after iOS 5 update?

    I plugged in my iPad2 to sync and download a document.  I noticed that there was an update to iOS 5 so I elected to download the update.  As a result my Ipad seems to be stuck in recovery mode as every time I plug it in and attempt to connect to iTunes I get the message. "Itunes has detected an iPad in recovery mode.  You must restore this iPad before it can be used with itunes."  I do so and after waiting for the update to download it tells me the same thing again.  I have tried different USB ports, rebooting my iPad and the computer and disabling antivirus software.  Please help me I literally need to use my iPad.

    I had a similar issue with my Ipad. I had to take it to Apple, they restored the system but after that my IPad did not sync. It was not until an hour ago I read on another forum someone suggesting disconnecting the Ipad abd turning it off, then connecting it to the PC (usb port) and then turning the Ipad on. Try it it may work for you. I tried apple support 3 times before with no luck! Good luck.

  • Help! My iPhone 4 is stuck on 'Cancelling sync'!! Can I Unplug the phone?

    iTunes is stuck on 'Syncing iPhone' and the iPhone Will not open 'iPod'. A message pop's up saying "Cancelling sync"
    Can I unplug the phone? Its 4:20AM now, I am tired and the phone has been attempting to cancel for an hour!
    Is the sync just to check the music? I put half-a-million songs on there..
    Hope you can reply ASAP.. My head hurts.

    I had this happen to me on the 25th when my sync kept popping up with errors and I couldn't do anything to iTunes except click ok on the error pop-ups, so I tried to cancel it from the phone ... After a little while of waiting, I finally unplugged it and when I reconnected it, it forced me to do a restore. After several attempts to get by without having to restore (restarting computer/phone, trying different USB ports, etc) I finally caved and restored from my latest backup. Usually a restore only takes a few minutes, but this one was going realllllly slow. It ended up failing with some error code. So I unplugged it, plugged it back in, and this time it didn't say I had to restore... It ended up syncing fine this time around. Hopefully yours worked better

  • I canon play video from my ipad through my Apple TV after downloading ios7 any idea why?

    Is there any reason I can't play video from my ipad through Apple TV after downloading ios7?

    Home sharing isn't working either
    Which is why you can not use the remote app.  Did you turn on home sharing on your computer and on ATV?
    eve though they have the same Apple ID.
    Did you enter the ApplieID in the home sharing login though?  Or just in for the iTunes store, or iCloud, or photo sharing, or something else?
    Home sharing isn't working either, I can't play or transmit any video from my iPad to the Apple TV because it doesn't recognize it
    That would be AirPlay, not homesharing.  THey are not related.  Did you enable air play on all the devices?
    Have you run the network test tools on ATV?  Can ATV access the iTunes store, Netflix, etc?

  • IPad Air won't sync after update

    I was still on 7.1.2 on my iPad Air before I upgraded. I made my backup to sync all my apps and everything and then did an update using the restore option and when I choose to restore my back up it takes about 3 hours and after that none of my apps have synced and iTunes is still asking if I want to "set up as new" or "restore from backup" well I have restored from backup about three times without getting any of my apps back. Any one else have this issue or know how to help? Thanks

    If you can, decline both options to restore the backup and set up as new, and just cancel out.  Then eject the iPad, quit iTunes, restart your computer, restart iTunes and then try to sync again. You can't be any worse off than you already are, of none of your apps are syncing anyway. Maybe refreshing everything will allow the process to work.
    IF you still have the backup that you created before you updated, your app data and settings should still be safe in that backup.

  • My ipad screens won't sync after rearranging on PC

    Ipad 2, iOS7 updated yesterday.  App icons went every "which-a-way."  Nothing is organized as it should be so I went on to my PC (Windows 7) and rearranged the Ipad icons.  After synching the IPAD several times, the icons are still where they were originally. I know the iPad is synching because it gets newly downloaded apps and removes those I request but still no dice.  A reset did not help.

    you do know that you can only sync with one computer right?

  • IPad will no longer sync after iOS 5 update

    I updated my Original iPad to iOS 5 and now it no longer syncs; it stays stuck at the preparing to backup step. This happens whether I try it via WiFi or via the standard way with the cable.
    I'm thinking I should do a Restore from Backup and get it back to iOS 4.3.5.

    I've been stymied at this backup failure (and thus sync and update since both go through the backup process first) for a long time, ever since release 4.3.3 or thereabouts.
    Stay with me, please; this was part of my recent troubleshooting process.  I tried using the new install of Safari and sure enough, it only loaded blank pages.  iTunes (new release) Help also loaded only blank pages and then reported "computer not connected to the internet".
    In seeking a resolution to the Safari connection issue, I came across this advice from Mike41: "If anyone runs across my post of 7/21/2011 regarding Safari 5.1 not connecting to the Internet on my Windows Vista system, BorisKon suggested I run a command prompt window as administrator and execute the command "netsh winsock reset" (then be sure to reboot). I tried this and now Safari 5.1 can access the Internet. See the discussion athttps://discussions.apple.com/message/15734035#15734035. I had to reboot for the command to take effect. "
    I did this on my system and now Safari, iTunes, and the iPad backup all function 100%.
    Start/Run/"cmd" without quotes.
    Type "netsh winsock reset" without quotes.
    Reboot the computer.
    Happy, happy, joy, joy...

  • Help! ipad stuck in recovery mode after itunes error 6

    so I was gonna update my ipad 3 from 6.1.2 I think, to 7.0.4 but I got the error 6 in itunes. now my ipad is showing the connect to itunes symbol and itunes wants to restore my ipad, which I wouldn't wanna if there was any chance to get it out of that frickin mode. I've tried anything I could find on the internet, like several tools such as tiny umbrella, redsn0w, ireb (which said my device wasn't supported cause of the A5) etc. but after rebooting the connect to itunes comes on again.
    so if there is any method left that might work for me, pleeeease help me   
    a restore is the last thing I wann do, of course I have a backup and so on but it takes so much time to get all my stuff back on and everything

    Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • ITunes still cancels sync after adding music

    Apple still has yet to resolve this issue without having users finding ways, and solutions around this problem.
    I'm at iOS 7.0.4 on a iPhone 4S, and iTunes ver. 11.1.3 on Mac OSX 10.9
    A while back, I had this issue, which I resolved after trying multiple solutions.
    & Now, it's back.
    I've tried my previous attempts again via different user suggestions.
    Restoring my iPhone.
    Transfering purchases
    Turning off Passcode lock
    Unchecking music and rechecking
    Disabling sync over WiFi
    Manually manage music
    Changing ID3 tags to v2.4
    AAC converted songs
    Using multiple iPhone Cables
    Restarting computer/phone.
    Making a new playlist
    Transfering songs and syncing 100 at a time
    Deleting iCloud backup of my music
    Syncing genius playlist
    I don't want to go through the hassle of resyncing 3k+ songs everytime :\
    Any other solutions?

    Download any free apps to unfreeze the frozen apps.
    If the above doesn't work try a reset.
    1. Hold the Sleep and Home button down (together)
    2. For about 10 seconds
    3. Until you see the Apple logo (very important)
    4. Ignore the red slider

  • IPad stuck in restore mode after update to iOS 8.02

    I attempted to do this yesterday and after the update was extracted I kept getting an Unknown error 3104. I tried everything form editing the hosts file in Windows 8.1, disabling my Anti-Virus. Uninstalling and reinstalling iTunes, resetting my router, etc, etc but nothing worked!!! This was very distressing for me as I couldn't use the iPad!!
    This morning I tried one last thing. I Downloaded iTunes on another Windows 8.1 PC I have and connected the iPad to it. It detected that it was in Restore mode and download the update from Apple and finally restored the iPad to factory settings!! After this I connected the iPad back on my original PC and restore it to how it was from the last backup made yesterday. Phew!! Apple should say something like this for other users or at least provide some way to get out of restore mode if an update fails or becomes corrupt!!

    Apple does make the suggestion to try another computer and another Internet connection for that very same error code that you got.
    Restore or update on another computer
    Try to restore or update on another computer with a different Internet connection. This will help rule out other issues on your computer that might stop iTunes from communicating with the update server.
    Errors 1639, 3000-3020, and 3100-3999 (with the exception of 3194) are sometimes caused by your network settings. If your computer uses a managed network, refer to your network administrator. Proxies, firewalls, and other network security measures can cause these errors. If necessary, find a different network connection to restore the device. For example, if you're restoring at work, try to restore at home or on a friend's computer and network.

  • Why is my ipad stuck in recovery mode after IOS update?  I can't get it out even after I restore.  Please help!

    I did an IOS update and now my iPad is stuck in recovery mode and I can't get it out.  I have tried to restore through iTunes, but after restore it says it is still in recovery mode.  Please help!

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

  • IPad 2 won't sync after update to 5.1 and iTunes 10.6.0.40

    Upgraded iPad2 to 5.1 and Windows iTunes to 10.6.0.40.  iTunes doesn't recognize the iPad as a device, but does recognize the camera.  Tried all iPad troubleshooting steps (restarting both, reinstalling iTunes, tried various USB ports).  Any ideas?

    Hi G-whiz,
    I solved the same problem (iTunes 10.6.0.40 upgrade on MacBook Pro). iOS  5.1 for iPhone and iPad, not recognised after update, even after rebooting each device in isolation and then all together. Still did not work.
    For me the issue was: The MacBook Pro was running BT with wireless kbd and touchpad connected; also I had a large flatscreen running from the mini display connector.
    Aiming to minimise any driver conflicts (even if external monitor and BT drivers are not third party), I followed these steps:
    1. disabled bluetooth
    2. disconnected external LCD
    3. rebooted MacBook Pro (wifi still enabled before restart to get to iTunes Store)
    4. connected iPad and iPhone to power (before upgrading to iOS 5.1 they had been set to wifi sync when on power)
    5. started iTunes
    Voila! Devices recognised automagically! And beginning sync instantaneously.
    bauhws

Maybe you are looking for

  • BPS Retraction for cost center accounting

    hi guys,    When i create sender structure for retraction,need to specify the retraction target(eg UPB_RET_COPS) using drop down to find.But i can't find any value after using drop down button.So i want to know how  and where to define the retraction

  • Monitoring using oracle10g enterprise manager

    hi i am working as dba. i want to moniotor the data entry operators that they are entering their data regularly. and also, i want to check regularly that how many records are entered by each user daily. i want to use oracle10g enterprise manager for

  • FlexBuilder 3 not stopping at Break Points

    Hi , when i am putting BreakPoints on to FlexBuilder on to DebugPerspective , its not stopping at Break Points , please let me know what do i need to install for this to stop at Break Points ?? Please find the screenshot attached of the related error

  • Activating the standard information structures

    Hi all, I was trying to check the standard report for customer sales (MC+E).... I have entered many transactions for various customers but when I try to see the standard report the system displays the following message: "No data exists for chosen sel

  • Flash Player crash while playing chilltrax.radio.de

    STR - open chilltrax.radio.de - play the station for about 30 minutes - Flash Player 11.8.800.146 will crash https://code.google.com/p/chromium/issues/detail?id=274695 https://bugzilla.mozilla.org/show_bug.cgi?id=641775#c12