IPad stuck in recovery mode 'preparing software for recovery'

We had tried updatind my iPad several times which came up with error code '1645' and we updated our itunes which had no effect and resulted in us putting it into recovery mode, where it is now stuck.
I've been looking on this post http://support.apple.com/kb/HT1808 and at start it says it resolves issues whe your iPad 'Stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes' my iPad is in recovery mode and it gets to the point in itunes where it displays 'preparing software for recovery' we've had it showing no progress on the bar all night and nothing we have done helps. But that support page really doesn't give any solutions.
I've looked on many sites and tried multiple things such as this website http://thehowto.wikidot.com/ipad-stuck-recovery-mode which is suggested lots and has had no effect after following all the steps.
Any help will be highly appreciated

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Similar Messages

  • Ipod stuck in recovery mode after software update

    My ipod is suck in recovery mode after software upgrade ios 6. No matter what I did it's still stuck and itunes doesn't recognized it.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • IPad stuck in docking mode

    Hi community, hi all,
    i have a problem with my iPad (first ... sry for my bad english ... i'm not a native speaker).
    Following issue:
    My iPad stuck in Docking Mode. Means i get no access to volume keys or to volume bar in the multi tasking section. The volume bar there is empty. So my iPad doesnt play any sound ...
    But when i plug in earphones or when i connect my iPad to a bluetooth speaker sound is playing. And when i plug in the iPad into the docking station and pull it off (plug out... doesnt know the word).... then sound comes out of the build in speakers for about 1-2 seconds ... afterwards iPad return into docking mode and sound is away.
    What i have done ....
    ... i rebooted
    ... i hard reseted it
    ... i do a factory reset
    Nothing work... but it seems to me like a software failure... dont know.
    Next issue is that i have no warranty left for exchange at an apple store...
    Any ideas from you?
    Thanks for any response.
    best regards

    I had resolved this issue by myself.
    I thought long time about it... and then i got following idea.
    I thought ... mybe there is something in the connector which think ipad is already plugged into a docking station.
    This helps me....
    my idea was .... another product with another behavior to the iPad. So i take my iPad Camera Connection Kit... i stuck it into the connector leave it for several minutes ... and removed it.
    My iPad turned back in normal mode ... All god. My internal speaker works again. Wuhuuuuu ... Maybe this solution would help somebody.
    br
    f2107

  • IPad stuck in Activation mode and won't restore either...

    Hi,
    A few months ago I installed the developer pre-release for iOS 6.0 on my iPad 2 and it got stuck in activation mode. Today I tried to to activate it again and it tells me that the "activation servers are temporarily unavailable". I tried restoring it and it wont let me. It also gives me a message that says the firmware has expired. I have connected to multiple wifi networks and they all give me the same error with activation. What is wrong?
    -Michael

    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
       1. Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
       2. Restore and wait for error 1604.
       3. When prompted, click OK.
       4. Close and reopen iTunes while iPhone remains connected.
       5. iPhone should now be recognized in Recovery Mode again.
       6. Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    http://support.apple.com/kb/TS3694

  • Preparing ipod for recovery repeting

    my ipod shuffle g3 goes on and off saying "preparing ipod for recovery" over and over again the ipod never syncs so i cant do anything to it on the computer like restoring it.

    I have a same problem you dealing with.... Any help here plss???????
    Message was edited by: VegasNinja

  • HT201263 iPad recovery mode says "Waiting for iPad" but never progresses.  Any suggestions?

    I have a iPad 2 that will not power up nor will it recover.  When plugged in, iTunes detects the iPad is in recovery mode and tells me I must restore to continue.  I agree and iTunes downloads the recovery and updates file, decompressed it, verifies it, then says it is Preparing the iPad for recovery.  I then get the apple logo on the iPad screen with a progress bar.  iTunes then says "Waiting for iPad".  The progress bar never moves and iTunes has said Waiting for iPad for 2-hours now.  When I disconnect the USB cable from the iPad, the logo/progress bar remains until I do a hard reset (home button/power button) to power it off.  Power button alone will not power it off.  Again, the iPad will not power up and again, iTunes will recognize it when plugged in and the whole cycle starts over again.

    When did this start happening? I mean, what was happening to the ipad that prompted you to try a restore in the first place?
    Did this start when trying to updated the ios?
    There were some issues awhile back with ipad 2 and updating to ios 6.1. The ios file had to be downloaded seperately to the computer and all other previous ios update files previously downloaded had to be deleted from the computer.
    If what I'm saying describes the issue, then take a look at the following article links, otherwise, you may just have to keep trying to follow HT1808 (it may take several attempts).
    I cannot restore the I pad 2,
    My Ipad 2 is stuck in recovery mode after the update 6.1
    or...
    DFU MODE
    http://www.iclarified.com/entry/index.php?enid=1034

  • HT1810 Keep getting eror message: "Iphone ineligible for requested build" when trying to restore Iphone 3GS in recovery mode.All software up to date.

    Hi there,
    A bit of background: phone was thought stolen and declared to Police as such. Found it later and cancelled theft declaration. In meantime provider had blacklisted IMEI number. After IMEI number was rehabilitated, was instructed by provider to restore Iphone in Itunes to be able to use it again. But normal restore failed and phone got into recovery mode. Keep getting following error message: "Iphone could not be restored. This device isn't eligible for the requested build".
    Checked all software up-to-date. Tried to troubleshoot with test in Teminal, firewall off, identifying ports... Still getting same error message. Anybody successfully restored Iphone in similar situation? Any help much appreciated, thanks.

    https://discussions.apple.com/message/18851577#18851577

  • I tried to update iOS in my iPad Air which was already downloaded in my pad. But when I tried to install it, my pad went to recovery mode and asking for iTunes. What to do now? I am trying to download iOS via iTunes MAC. Will it be cleaver?

    ios 8 update in ipad air, went to recovery mode. Can't open it now!!!

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • IPad Stuck in LOCKED mode after RESTORE asking for apple ID I no Longer use

    Hi All,
    This Morning I upgraded to iOS7. Both my iPad (3rd) and iPhone (4) were asking for iCloud ID I no longer use. Although I use the same Apple account but with a different e-mail ID. I Restored my iPad to factory settings and now it wont go pass the UNLOCK screen asking for the same OLD Apple ID.

    I was bussy with updating my IPad when asked for Apple ID did put it in but IPad stuck

  • Problem with recovery mode and restore for disabled ipad2

    Hello, I hope you can help me.
    My ipad2 is disabled.  My only option is to enter recovery mode and then restore. 
    I followed the instructions to connect to my ipad to my computer.  I saw the appropriate restore graphic on my ipad.  Yet iTunes on my computer does not recognize my ipad in recovery mode.  Instead iTunes said it could not access my device because it was disabled.  I have the lastest version of iTunes on my computer.   I believe I have iOS 7 on my ipad.
    I am unable to restore my ipad.
    Any suggestions?
    Thank you!

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
    iPad Stuck in Recovery Mode after Update
    http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
     Cheers, Tom

  • Iphone 4S stuck in DFU mode after software update

    I tried to update my iPhone 4S but for some reason it failed and went into DFU mode. When I tried to restore the device from iTunes an error code (9) pops up. After several failed attempts I gave up and decided to visit an Apple store. To my disappointment, the restoration failed and because the device was out of warranty (bought in Oct 2011) I was offered a like for like handset for £149. But I declined, I couldn't grasp the fact that my phone stopped working due to a software update and I had to pay for another one. I was also told by the Apple rep that due to the age of some devices, they were not able to handle software updates! That really upset me because if I had known that, I would not have even bothered with updating my phone. Besides, I've had this phone for just under 3 years I didn't think it was that old to not be able to survive a software update.
    Apologies for the rant.. but is there anyone who has/had same experience and is there no way to restore the device?

    Try the steps:
    How to perform a recovery-mode restore
    If your iPhone, iPad, or iPod touch is already showing the "Connect to iTunes" screen, please go to step 5.
    Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
    Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
    iTunes should automatically open and display the following message:
    "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
    Note: If iTunes not open after two minutes, please open iTunes yourself.
    Use iTunes to restore the device.
    More info here: http://support.apple.com/kb/HT1808

  • Iphone in recovery mode after software update

    Hello, I have just downloaded and upgraded my software on iphone 4.
    It seemed to have taken about 2-3 hours.
    There was an error (which I missed) and now I have on my phone the white apple sign, on my itunes it says - "Itunes has detected an iphone in recovery mode. You must restore this iphone before it can be used with itunes.
    My only option on itunes is to restore to original settings, which Im guessing I will lose all my data etc?
    Does anyone know of an alternative solution?
    I have held down the home and power button but no luck.
    Please help!

    Try the steps:
    How to perform a recovery-mode restore
    If your iPhone, iPad, or iPod touch is already showing the "Connect to iTunes" screen, please go to step 5.
    Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
    Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
    iTunes should automatically open and display the following message:
    "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
    Note: If iTunes not open after two minutes, please open iTunes yourself.
    Use iTunes to restore the device.
    More info here: http://support.apple.com/kb/HT1808

  • Iphone 4s now in recovery mode after software update 7 ??

    hi. i have seen a few comments regarding this, but this is my BUSINESS PHONE and I cannot get it out of recovery!
    it went into recovery after I uploaded (ironically) the bug fix realeased yesterday.
    Now, nothing! Just the itunes connection picture on the phone and message regarding 'phone is in recovery mode'
    HELP!
    Thanks

    Try the steps:
    How to perform a recovery-mode restore
    If your iPhone, iPad, or iPod touch is already showing the "Connect to iTunes" screen, please go to step 5.
    Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
    Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
    iTunes should automatically open and display the following message:
    "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
    Note: If iTunes not open after two minutes, please open iTunes yourself.
    Use iTunes to restore the device.
    More info here: http://support.apple.com/kb/HT1808

  • HT201263 I have downloaded ipod software for recovery and still cannot get anything to happen

    I have gotten my Ipod to go to the Itunes connect screen for recovery. However when I donwloaded the update it did not work. So my Ipod is still not being recognized by my computer.

    If you cannot operate the device nor get it to connect to iTunes, make sure the cable is not the problem, try another cable.
    If not, then try this:
    1. Connect the device to iTunes
    2. Hold both the power button and the home button down simultaneously
    3. After 10 seconds, release the power button but leave the home button pressed
    4. iTunes should then recognize that the device has entered DFU mode and ask to restore.
    ~Lt. Leviathan

  • Since iOS 7 update apple tv screen on ipad stuck in portrait mode

    Since ios 7 update Apple TV screen on iipad stuck in portrait mode. How to unlock?

    Do you have orientation lock turned on on the iPad?  You would see a little lock with a clockwise arrow going around it near the battery symbol on your iPads screen.

Maybe you are looking for

  • How do I create this window effect?

    I was looking at this photo http://image.shutterstock.com/display_pic_with_logo/442024/442024,1297015560,3/stock-vecto r-download-button-set-vector-set-for-web-70603081.jpg trying to figure out how they get the little window to appear like that. I ca

  • Siren sound...again

    Opteron 244 in MSI K8D Master-F. See more specs in my signature below. PC powers up, 5-10 seconds later the infamous siren sound (continuos high-low-high-low tones) starts. NOTE: The PC boots just fine, Windows runs at it should... CPU temp is 45°C,

  • ASDM multiple network objects vs group for rules

    I was just curious if there are any performance benefits of using multiple network objects on multiple rules vs consolidating them into fewer rules by grouping them?  For example, I have about 10 lines of NAT exempt rules from the same source to mult

  • Regarding screen exit

    Hi Friends, I created the sales order using VA01 and enter the payment terms and saved. But mu requirement is when i go through VA02, payment terms field must be in display mode. So, user not able to chage the payment terms value. Please give exact s

  • Upgrading to Crystal Reports 2011 from Crystal Reports XI

    Hi, I hope someone can provide some assistance.  I am a current user of Crystal Reports XI and am upgrading my notebook to Windows 7 so therefore need to upgrade my version of Crystal. I have downloaded a trail of CR2011 and installed.  I am wanting