IPad stuck while installing iOS 7

The progress bar doesnt seem to move while installing the new version since yesterday.
What can I do????!
Thank you

You can try this. You may end up having to restore the iPad, but you aren't getting anywhere anyway. This might at least jog the iPad into some sort of functionality again.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Similar Messages

IPhone 5s stuck while installing iOS 7.1.2

I have an iPhone 5s that was running 7.1.1. I updated to 7.1.2 and now it's been stuck on the black screen with the white apple logo with the status bar almost half way through for almost an hour. This was done over the air - it's plugged in and wifi is on - do I just leave it alone? Thanks.

I have similar problem, but when connected to iTunes. It couldn't recognized your phone and instead put your phone under recovery mode and ask to restore to original condition. But, when you clicked restore iPhone, it would take ages to verify to the iPhone software host.
Something wrong with iOS 7.1.2. I would recommend that do not update the software yet until Apple tell the real story what is happening now.

HT4623 My iPad stuck during downloading ios 7 at the stage Terms and condition I click agree.ipad not responding

My iPad stuck during downloading ios 7 at the stage terms and condition when I agree no response

Reset the iPad by holding down on the sleep and home buttons at the same time until the Apple logo appears on the screen.

HT4623 i got 3004 error while installing ios 7 , how to fix it ?

i got 3004 error while installing ios 7 , how to fix it ?

I was trying to update my iphone 5 to IOS7 and couldnt do it for 5 times then I did the following and was able to update it right away
Clearing your DNS cache may resolve the issue and enable you to connect to the iTunes Store.
The easiest way to clear your DNS cache is to shut down your computer completely and then restart. If you can't shut down, you can clear your DNS cache manually.
Click Start and choose Run.
In the dialog that appears, type “cmd” (don’t type the quotes) and click OK.
After the DOS prompt (C:\), type “ipconfig /flushdns” (without the quotes) and press Enter. Make sure you enter a single blank space after “ipconfig.”
Let me know if it solved the issue for you

My iphone 4s got stuck while upgrading IOS to 7.03. How do I fix it?

My iphone 4s got stuck while upgrading IOS to 7.03. How do I fix it? It has stuck more than 3 hours.

Connect the device to the computer and iTunes and follow the information in this support document http://support.apple.com/kb/HT1808

Ipad stuck while downloading itunes apps

sir my ipad stuck while downloading iTunes apps in between
i have tried to open with the buttons
start/sleep button +wake up button
pressed for 11 seconds
symbole of apple is displayed
again
the symbol of
iTunes
arrow
and usb connector showing from the wakeup button side

According to this support site, books are available for free re-downloads everywhere that Apple has a store - every country that they sell content in.
http://support.apple.com/kb/ht5085
This does not include audio books though. So your purchased books should appear in the purchase tab of the iBook Store. See if closing the app completely and rebooting the iPad makes them appear again.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

How you close an application on ipad 4 after installing ios 7

How you close an application on ipad 4 after installing ios 7

Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app.

Since backing up my iPad air and installing IOS 8.1.2 the screen doesn't move between landscape or portrait when I turn it. Any tips for getting it to do so?

Since backing up my iPad air and installing IOS 8.1.2 the screen only shows the portrait view and won't change to landscape view when I turn the device. Any tips for getting back both views?

If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
Try the side switch above the volume rocker first and see if that unlocks the screen. If that didn't work, swipe up from the bottom of the screen to get to the control center and the lock icon is in the row of icons at the top all the way to the right.
If the screen is unlocked but still will not rotate, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the button

TS3694 Ipad air frozen while installing ios 8.1.2

When installing ios update 8.1.2 my ipad air froze and is now stuck on a black screen with a power cord pointing to an itunes icon. I have tried connecting to power, restarting and hard resetting. Nothing works. Has anyone had this problem and could tell me how to fix it please??

YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Getting Stuck While Installing Oracle8i

Guys,
I stuck with a problem while installing Oracle 8i on Windows 2000 SP4. The installtion getting stuck while configuring Net8 Configuration Assistant_
Please help me out and suggest what needed to be done..
/Pradyumna

Hi,
Thanks for the quick reply. See during installtion am not getting any error. The installtion is getting stuck where the Optional service like Net8 Configuration Assistant ,_HTTP...._ comes up. Even I tried to stop the Service by clicking on Stop button, but it does not work. It showing In Progress thats all.
Oracle8i is not supported anymore but this is the csr requirement for some application which is compatiable for this version.
/Pradyumna

App got stuck while installing help

I was trying to download an app and it got stuck while loading. I can't delete it. I have turned off and on my phone to no avail. I tried plugging in the phone to itunes. Help please

This happened to me when I got my iPhone. Simply all I did was turn off the Wi-Fi and it should stop saying "Loading"
What you can do is download the same app and see If it will move. Or just use iTunes to install the app.

Got stuck while installing BAM.

Hi all,
I am stuck at the step: DATBASE CONNECT INFORMATION, while installing the BAM. Everytime I try, its giving me error saying that the Installer cannot connect to the database located at parameter #1.
Please help me in getting out of this issue.
Regards,
Vishal

I had the same issue and managed to resolve it
What you need to do is uninstall Oracle XE from the Add/Remove programs under the Control panel. You should also delete all the installation folders that might remain on your machine...
Then go to start->run and type regedit
In the Registry window that opens up, go to edit find and search for all occurrences of both oraclexe and OracleBam and delete every record that contains those words in the panel on the right. Please make absolutely certain that you deleting the right occurrences of the records as any mistake might completely mess up your system.
Reinstall Oracle XE and and OracleBAM and if your lucky like me, everything should work
Edited by: user4886758 on Nov 5, 2008 2:19 PM

Stuck while installing Essbase

Hello
Am installing Essbase on Windows 2008 R2 server and while am installing Essbase am getting stuck while the Essbase is installing OPMN . Am not able to go beyond that. Please help me with this.

Hi,
You have to look into the logs to figure out the issue with OPMN.
Look into the install logs for Essbase and reply by pasting part of the logs here so that we can help you.
Thanks,
Sourabh

SAPinst stuck while installing ECC 6.0 Ehp4 - check sum error

Dear All
I am installing ECC 6.0 EHP4. While installing i am stuck in 4th step Unpack SAP Archives.
error log from SAPinst is below:
ERROR 2011-12-14 16:19:03.118
 CJSlibModule::writeError_impl()
MUT-03011 Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).
TRACE 2011-12-14 16:19:03.118 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2011-12-14 16:19:03.196 [sixxcstepexecute.cpp:950]
FCO-00011 The step unpack with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Unpack|ind|ind|ind|ind|8|0|unpack was executed with status ERROR ( Last error reported by the step :Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).).
TRACE 2011-12-14 16:19:03.227 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option Enhancement Package 4 for SAP ERP 6.0 > SAP Application Server ABAP > Oracle > Central System > Central System( Last error reported by the step :Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/CENTRAL/. </body></html>
Please suggest me how to remove this check sum error
thanks
sandeep

Hi,
ERROR 2011-12-14 16:19:03.118
CJSlibModule::writeError_impl()
MUT-03011 Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).
Above error implies some problem in extracting the OCL10264.SAR file from your DVD path.
There are 2 options
1) Try to extract that file manully using the command
 sapcar -xvf d:/ext/51036972/OCL_Windows_x86_64/OCL10264.SAR
 If this works, then try to update your SAPINST.EXE and repeat installation process
2) In case step 1 fails, then your source is corrupt. You need to re-download or recopy the Oracle Client DVD.
Hope this is useful.
Regards,
Deepak Kori

Help! computer stuck while installing automatic updates

Hi there, I'm having a problem while installing the automatic updates. I bought this iMac about 7 months ago and I've installed all the automatic updates without any problems, but since 2 weeks ago when the updated software asked me to restart my computer to install the new updates, the computer just got stuck after loging out when the INSTALLING UPDATES windows appears. It stayed there for about 6 hours (I thought it was like a really large update) but the process bar was still like in 1%. So I just pressed the ON/OFF button and restarted the computer.
Now I have 4 updates outstanding and everytime I tried to install them the same happens, the computer gets stuck in the installation window.
Does anyone here know what could be wrong and how to fix it? is there any way to delete the installations remaining and start right from scratch or something?
Please I need help! this is the first Mac I've ever had!
Thank you all.
Cheers,
German D Salamanca
<Edited by Moderator>

Hi German D. Salamanca;
You really should not post you email address in your thread. Addresses posted in this manner can be harvested for use with spam. If you wish to you can place your email address in your profile instead.
I am going to suggest to the monitors that they edit your message to remove the address.
Allan

IPad stuck while installing iOS 7

Similar Messages

Maybe you are looking for