IPad swipe/pinch commands not working

My iPad suddenly will not respond to 5-finger swipes, 3-finger pinch commands, etc.  Restarting has not helped, and there are no software updates available (currently running 7.1).  Any suggestions for fixes?  Thanks!

first look in settings, general, multitasing.  did it get turned off?
Restarting did not help- did you do a full reboot?  press and hold both the home and sleep buttons until the apple logo appears.  ignore the red slider. 
Then try again.

Similar Messages

  • My ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working. i have a a windows PC please help thanks

    my ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working.
    ive tried everything and ive been to the store which was when i was given a new ipad mini. i have a a windows PC please help thanks

    Are you attempting to sync music from your iTunes Music Library on your PC?
    What options do you have set on the Music Tab for your iPad in iTunes?
    What happens when you sync?
    Any error messages?

  • When I attempt to updates apps on my ipad my password does not work. I tried updating them one at a time and it still doesn't work. I've reset my password and I can use the new password and update apps on my PC but not on my ipad. Why?

    When I attempt to update apps on my ipad my password does not work, even when I attempt to update each app separately. When I change the password it works on my PC but not on my ipad.  Why?

    Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.

  • I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless.  I am using a Netgear N300 router.  Also my Netgear ethernet/homeplug for wireless TV internet no longer works.  Any ideas?

    I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. They did before hooking up the iMac. I am using a Netgear N300 router.  Also my Netgear ethernet/homeplug for wireless TV internet no longer works.  Any ideas?  I have tried unplugging, restarting, and resetting.  No luck!  Thanks!

    You should probalby contact Netgear

  • Auto-Brightness on iPad mini Retina is not working properly.

    Hello! Noticed that the Auto-Brightness on iPad mini Retina is not working properly.
    It works correctly only when such a dark place, then unlock the iPad brightness will be at a minimum. Likewise, if unlock iPad in a room with light, the brightness will adjust to the surrounding space.
    If I turn light into a dark room, the brightness slider does not move, and stands on the site. Checked on the iPhone 5S, there problems are not present. Auto Brightness is working correctly.
    P.S. Sorry for my bad english!

    Godly19 wrote:
    iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
    iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
    The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't.  Any ideas on what is wrong with it and how to fix it?
    The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
    I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
    And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case.

  • My iPad 2 charger is not working when plugged to a wall..but when plugged to a computer...it says unknown device...what's happening and how do I fix this problem?!

    My iPad 2 charger is not working when plugged to a wall..but when plugged to a computer...it says unknown device...what's happening and how do I fix this problem?!

    Have you recharge your iPod for at least 2 hours, preferably till the Full charge Battery symbol comes ON.?
    See this Apple support Article
    http://www.apple.com/support/ipod/five_rs/classic/
    You did not by chance bought the Hello Kitty special edition?
    Have nice day!

  • Alt ctrl c shortcut command not working in photoshop cc, it is opening Internet explorer (IE)

    In Photoshop CC 2014  Alt + Ctrl + C ( to open for canvas size dialog box ) command not working, it is opening Internet Explorer (IE)

    What version of windows are you using?
    See if the Internet Explorer shortcut has that keyboard shortcut assigned to it.

  • Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

    Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • Bash commands not working after upgrade to Lion

    After upgrade, many BASH commands not working. For example, such a fundamental thing as "ls". 
    iMac20:bin a$ ls
    Launch of "ls" failed: the PowerPC architecture is no longer supported.
    What does it have to do with PowerPC? My computer is 2.66 GHz Inter Core Duo

    Linc,
    iMac20:~ a$ which ls
    /sw/bin/ls
    Also, I managed to look (using tcsh's ls-F command) into the contents of /usr/. Here's what I see there:
    [iMac20:/bin] a% ls-F
    [*          csh*        echo*       ksh*        mkdir*      rcp*        stty*       wait4path*
    bash*       date*       ed*         launchctl*  mv*         rm*         sync*       zsh*
    cat*        dd*         expr*       link*       pax*        rmdir*      tcsh*      
    chmod*      df*         hostname*   ln*         ps*         sh*         test*      
    cp*         domainname* kill*       ls*         pwd*        sleep*      unlink*    

  • My ipad 2 sounds is not working.

    My ipad 2 sounds is not working i upgrade it to ios7 nothing seems to be a problem but after a few weeks my ipad sounds is gone. As in all sounds. Whe i use earphone it works. But when the speaker. Not. I tried all the tips that i read here. Nothing works. Please help me. Thanks..

    Have you checked the Mute switch on the side ? If it shows orange/red , its ON
    Do you have Do-Not-Disturb set on ?  If you can see a quarter moon icon near your battery indicator - its ON.

  • HT201406 my ipad touch screen is not working please give solution for it.

    my ipad touch screen is not working please give solution for it.
    i have connected ipad to itunes and done it restore seetings then also my touch is not working but
    when i connected ipad to i tunes inside functions are working properly but touch screen is not working what can i do

    If you have a screen protector on the iPad's screen, try removing it. If you don't or that doesn't help, and restoring the iPad to factory settings has not corrected the problem, then the iPad probably has a hardware problem and will need to be taken or sent to Apple for replacement.
    Regards.

  • Why is my BDC_CURSOR command not working to position the cursor?

    Why is my BDC_CURSOR command not working to position the cursor?  Here are the details regarding my issue.
    I am writing a BDC to mass delete routing material assignments using transaction CA02.  I am OK to navigate through the initial screen to go to the Header screen and from here I am OK to navigate to the Material Assignments screen.  But once here, I cannot get the BDC_CURSOR command to take me into the list.  Here are the commands I am using.  Please let me know what I may try differently.
    CA02 Material Assignment - Set position  <-- this resets list of materials to correct position
      PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
      PERFORM bdc_field       USING 'BDC_CURSOR'  'RC27X-ENTRY_ACT'.
      PERFORM bdc_field       USING 'BDC_OKCODE'   '=ENT1'.
      PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'  c_position.
    CA02 Material Assignment - Delete
      PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
      PERFORM bdc_field       USING 'BDC_CURSOR'  'MAPL-MATNR(01)'.    <-- this is not working to set the cursor into the list
      PERFORM bdc_field       USING 'BDC_OKCODE'  '=LOE'.             " trash can
      PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'  c_position.
    CA02 Material Assignment - Green Check OK
      PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
      PERFORM bdc_field       USING 'BDC_CURSOR'  'RC27X-ENTRY_ACT'.
      PERFORM bdc_field       USING 'BDC_OKCODE'   '=BACK'.            " check mark
      PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'  c_position.

    Thank you for your reply.
    I had used SM35 to record.  However, I was not aware of the "create program" feature.  I had commented out a section from my previous post which I have now added back (latest code below).  But it still did not resolve the issue.
    When I execute with dismode = 'N', I get back error message "No batch input data for screen SAPLCZDI 1010".
    When I execute with dismode = 'E' (only show dynpros when error), it stops at the material selection screen without placing my cursor in the list.  I can then MANUALLY click to set the cursor position in the list, MANUALLY click the trashcan, it then uses my BDC command to respond to the popup asking "Do you want to delete", still leaving me at the material selection screen.  I can then MANUALLY click the green check (or enter), then it continues with the BDC to go back to the previous screen, and saves.  But it still will not place my cursor in the material selection list (SAPLCZDI screen 1010).
    Here is code used.  It is the second section of code labeled "CA02 Material Assignment - Delete" that is not working.
    CA02 Material Assignment - Set position
    this code functions to position the desired material to first in screen list
      PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'RC27X-ENTRY_ACT'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=ENT1'.
      PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                     c_position.
    CA02 Material Assignment - Delete
      PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
      PERFORM bdc_field       USING 'BDC_CURSOR' 
                                    'MAPL-MATNR(01)'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=LOE'.             " trash can
      PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                     c_position.
    Acknowledge Pop-Up Screen
      PERFORM bdc_dynpro      USING 'SAPLSPO1' '0100'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=YES'.
    CA02 Material Assignment - Green Check OK
      PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'RC27X-ENTRY_ACT'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=BACK'.            " check mark
      PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                     c_position.

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Hello my ipad 2 mic is not working. I tried vacuuming. Still no changes. Pls Help

    hello my ipad 2 mic is not working. I tried vacuuming. Still no changes. Pls Help

    Try restoring the IPad. Either plug it into your computer or go to iPad settings, reset, all content and data. Restoring it should fix any software issues if it's a software problem. If that doesn't work it's likely a hardware issue and can't help you there. Have to take it into an apple store or authorized seller.

  • HT1212 Tried to follow instructions on how to reset the IPAD passcode.  Did not work.  What else can I try?

    Followed instructions on how to reset iPAD passcode.  Did not work.  What else can I try?

    Hi, Nancy, and welcome to Apple Discussions. You've posted your question about using an iPod in a forum devoted to iPhoto, an application that has nothing to do with iPods. You would probably find a better-informed audience over in the iPod discussion area, under the particular Pod model that you own. Good luck!

Maybe you are looking for