Ipad telling me to upgrade but software says up to date
My Ipad popped up with a screen telling me IOS6 available to update and in settings the software says 1. but when i open it it says Software up to date. No idea what to do. Any help appreciated.
Thanks.
Connect your iPad to iTune (computer) and Check for Updates. Backup before you proceed with update.
http://i1224.photobucket.com/albums/ee374/Diavonex/a12310c6040505d18fbb03256ceb7 0de.jpg
Similar Messages
-
weI am getting occasional Safari is out of date messages but checking for new software says "up to date". Initially we subscribed to Support but did not realize that it has expired. We have upgraded the OS once but have not received any notices of additional upgrades. So far I have not come across a way to update on my own.
I suspect this is the issue but wonder whether it is wise to upgrade my model:
Model Identifier: iMac11,2
Processor Name: Intel Core i3
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
Will it run it? -
Some pictures in my iCloud show up blank on my ipad.... But it says I have zero pics on my iPhone... Where are my pictures?
Photostream in the cloud only keeps photos from the last 30 days (subject to a 1,000 photo limit). When photostream syncs the photos to your device they will stay there (subject to a 1,000 photo limit) until deleted, which means you may well have more photos in your photostream album on your device than there are in photostream in the cloud.
The consequence of this is that if you turn photostream off and on again on your device (or enable it for the first time), it will only be populated with photos from the last 30 days, which may not be all the photos that were previously in the photostream album on that device.
The problem I see is that the photos aren't on your phone and you won't be able to get them from the cloud because they are over 30 days old.
As for your iPad it sounds like they might be there, but you have encountered some sort of corruption. The problem is you can't turn photo stream off and on again to reset it, because you would lose what ever you have (even though they are corrupt) and they can't be recovered from the cloud.
The only suggestion I have is to try restarting the iPad. -
I have purchased a new mac book pro and I'm trying to install CS6 from old mac. I have installed cs6 upgrade but, software is asking for cs4 number which is not being accepted.
I should add that it's an HP photosmart 4280.I found it online and it shows the Mac 0SX operating system.
-
My ipad currently has ios 5.1.1 and won't recognize any available update for ios 6. I have tried on the ipad and connected to itunes and both say up to date. How to I update to ios 6?
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 6.1.x
iPhone 4S iOS 6.1.x
iPhone 5 iOS 6.1.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 6.1.x
iPad 1 iOS 5.1.1
iPad 2 iOS 6.1.x
iPad 3 iOS 6.1.x
iPad 4 iOS 6.1.x
iPad Mini iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
Why does Chrome say Flash good, but Safari say out of date?
On my Macbook Pro (Yosemite 10.10.2) why does Flash Player work with Chrome but Safari says out of date?
More importantly trying to update Flash player download gets stuck at 30% and my fans start going crazy and system over heating. Why?On my Macbook Pro (Yosemite 10.10.2) why does Flash Player work with Chrome but Safari says out of date?
More importantly trying to update Flash player download gets stuck at 30% and my fans start going crazy and system over heating. Why? -
Ipad mini, after ios7 upgrade if turn off the mobile data, my carrier gets turned off and wifi doesnt work at all. Its slow and app store crashes everytime. Help me to gowngrade to ios6. This really *****.
Tap Settings > General > Reset > Reset All Settings
Then restart your iPad.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
Then press and hold the Sleep/Wake button until the Apple logo appears.
Downgrading is not an option for an iOS device. -
Mail on my iPad verifies my MobileMe email when I enter it in Add Account, but then says we have an invalid ID or password when you launch the Mail App. I have validated that both are entered correctly. Any ideas?
You are not the only one. I got the same message on my iphone within the last hour. However... I just got an email from another support discussion, so maybe it is working again.
-
Brand new IPad - will not take a charge? Am at 3%! Any ideas?
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
Cheers, Tom -
IPad successfully paired with iMac, but it says it isn't connected
It says my device is not connected and on my iMac, it shows the bluetooth connection to the iPad, but has a red dot and it says not connected. How do I connect them. Thanks!
My iPad isn't house broken, never mind jailbroken. It's a bog standard Gen 2 iPad (no 3g).
The iMac is by the window, where it's able to pick up a free WiFi signal. The iPad doesn't see the WiFi at all, even when I stand by the window with it. The iMac seems to have a better receiver. That's when I decided to see if I could use the iMac to share its internet connection, and after a bit of mucking around it worked via bluetooth.
Hope these images help...
1. iMac SysPrefs 'Bluetooth' tab screen shot
2. iMac SysPrefs 'Sharing' tab screen shot
To check "Bluetooth PAN" checkbox on the right, you have to uncheck "Internet Sharing" on the left first. (Re-check it when you're done)
3. iPad Settings 'General' tab, Bluetooth 'On' (photo)
4. iPad showing iMac connected via bluetooth (photo)
...that's yours truly reflected on screen, w/cam
5. iPad showing web connectivity via bluetooth connection with iMac, no WiFi (photo) -
TS3274 My iPad seems to be working but it says no service in upper left corner?
What does it mean if it says no service but everything is working?
Hello there, Joan.
The following Knowledge Base article offers some great recommendations for troubleshooting the issue you're having:
iPhone: Troubleshooting No Service
http://support.apple.com/kb/ts4429
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Airport express loses signal but software says it's OK, and light is green?!
My AirPort express wireless 7.6.4 has just stopped working although the light is green and the Airport Utility software in the computer (10.9.5) says the connection is "excellent". I have it connected to a BOSE speaker which works (I tested it with an iPhone in the dock to make sure it wasn't the speaker gone). The airport express uses a wireless signal from an airport extreme (7.6.4) which is working because I tested the AP extreme and printed wirelessly from the computer. The airport extreme is connected to a modem via an ethernet cable. I have done a soft and hard reset on the AirPort express, and I still can't get my audio happening. I accidentally turned off the modem earlier and that is when the problems started. Obviously the signal is there according to the software. I have run out of ideas how to fix this!
I did what this thread recommends last night...worked perfectly!
http://discussions.apple.com/thread.jspa?messageID=6732758�
I unplugged all modules, left them for 5 mins minimum. Then reconnected modem and then Airport express. Immediately got a gree solid light after reboot and then Airport Utility used to set up my base. Internet is super fast again. -
IPad is connected to Airport, but Safari says not connected to Internet?
I'm hoping someone can suggest something for me. We had a power outage last night, and when the power came back and I got the Airport working again our iPad won't connect to the internet. I don't think the problem would be in the Airport, since the computer is connected wirelessly also and is connecting OK. I have tried renewing the lease, turning the wi-fi off and back on, forgetting the network and reestablishing the connection, and restarting the iPad, all to no avail. The IP address listed when I look at the iPad settings starts with 169 - from what I've read that means it's not connecting correctly. Is there anything else I can try to get it working?
Thanks in advance for your help!I forgot to mention that, but I have done that as well.
An update: my husband took the iPad to McDonald's to see if he could connect there, and got the same message (Safari could not open the page because it is not connected to the Internet). I'm stumped! -
Update notification for Iphoto and when I attempt to install it says I need at least version 10.8.2 installed, when I check my software update it says I have the newest software with 10.8.1?
Thanks, I thought so... but when I look for a newer version I takes me to the mac app update page but doesnt show any updates available other than Iphoto? I guess my real question is how do I update my software when nothing shows in the mac app updates?
-
No Acrobat Pro XI on my HD, but AAM says "Up-to-date"
Recently I reinstalled Windows 7 due to problems. I successfully installed Adobe Application Manager (AAM) and other applications, such as Photoshop, Illustrator and Lightroom. Acrobat XI Pro, however, could not be installed because AAM said "Up-to-date" and there was no option to install. How can I fix this problem and install the application?
download the trial: http://www.adobe.com/cfusion/tdrc/index.cfm?product=acrobat_pro
and activate with your serial number.
Maybe you are looking for
-
HP Color LaserJet Pro MFP M177fw ; stuck in Initializing... mode
My printer was working fine and suddenly stopped working. The printer now is stuck in the initializing mode. I've restored the factory setting, power cycled the printer (both with the power button and by disconnecting the power cord) to no avail. How
-
Freed memory not available 2012 MacBook Pro Retina
I have a 500 GB flash storage drive on my 2012 MacBook Pro Retina. In a bid to run things faster for my music production, I've moved my large ITunes library onto an external hard drive. I backed everything up and trashed the iTunes folder after the e
-
Downloading speed in Adobe Content Viewer
Is it olny me, who is waiting 30 minutes to download 31Mb folio? Or there are problems in Adobe side? I am in Europe. I think there are different servers for America and Europe. There were problems yesterday morning also. Ants
-
Printing with the conditin record "LD00"
Hi all, Request of a client: He needs a pre-defined output type u201CLD00u201D while creating outbound delivery, however now and then he wants to get a print out not always. Resolution: 1. I have created a condition record for the condition type
-
Marketplace Systemdata : No V6R1 possible
Hi together, in the Marketplace, on administration the system data , it is not possible to change the OS Release to V6R1. The highest entry is V5R4. And on Field System is shown: DB2/400A with Version 9.5 ??? Is this normal? Could the specialists pl