IPad to eprint problem

Question

why does a document sent from my iPad print with the word "Confidential" in bright blue across it? Using HPphotosmart7510 C311a

Answer 1

No problem again,
You are you using inside the same the network and is disconnecting after you print once.  
On your IPAD
Go to Settings > WiFi and touch the ">" next to your network name.
This brings up the connection details one of which is the DNS server IP address.
 always use the same DNS settings, use 8.8.8.8 and as alternative 8.8.4.4  
Set static IP Address
Refer to the network configuration page or the wireless network test report that you printed in Step one, and locate the IP address of the HP product.
Open a new Internet browser window, and type the IP address of the HP product in the browser's address bar, and then press Enter . A web page displays, showing the internal settings of the HP product.
Click the Networking tab, click the Wireless tab, and then click the IPv4 tab (your menu path might be slightly different, depending on your HP product model. A new settings page displays.
On the page that displays, make the following changes:
Set a Manual IP : Your wireless router automatically sets an IP address within a specific range (called the DHCP range). If you know what the DHCP range is, set an IP address in which the last set of numbers is outside that range, but no higher than 254. Keep the first three sets of numbers the same. If you do not know the DHCP range, select a fairly high IP address, like 250 (again, for the last set of numbers). To learn about your router's DHCP range, contact your Internet Service Provider (ISP) or wireless router manufacturer.
Set subnet address : Use 255.255.255.0, unless you know that it is different, in which case you should use that number.
Set the gateway address and the DNS : Enter your router's IP (can be found on the network configuration page or the wireless network test report).
 Hope this helps;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!