IPad to Thunderbolt display adapter cable

I just bought a new 27" Thunderbolt display and have it connected to my MacBook Pro.  I would like to take the monitor with me on an RV vacation.  Is there an adaptor cable that will allow my iPad 2 to connect to the display to play videos.  Is there a way to adapt the video output from a standard portable DVD player to drive the Apple Display?

As HuskieN stated... you are NOT able to connect the iPad to the TB display (to display video).
As stated in the System Req's on the Apple site for the display, it must be connected to a "TB-enabled Mac computer".
http://store.apple.com/us/product/MC914?mco=MTgwOTQzMzk#overview

Similar Messages

  • Which adapter or cable for connection from apogee condenser mic to ipad 4 retina display 16 gb wi-fi?

    hello
    i ve got  an apogee condenser mic to record my acoustic guitar and singing. in box there was a cable for connection to ipad&iphone. but that cable was not able to plug in to my ipad 4 (retina display 16 gb wi-fi).i need an adapter or an another cable to plug in the microphone into ipad.but which pin?which kind of adapter?thank u

    Hi,
    You need a Lightning adapter with 30 pin...

  • Can I connect MacMini 2009 to Thunderbolt Display with Adapter Cable

    Can I connect MacMini 2009 to Thunderbolt Display with Adapter Cable (Mini Display to Thunderbolt Adapter)

    Sorry but no you can't.
    Only Macs with ThunderBolt ports can be used with the ThunderBolt Display and the 2009 Mac Mini doesn't have a ThunderBolt port.
    Which computers can I use with my Thunderbolt display?
    Stefan

  • Can a Thunderbolt display be used with an iPad?

    Can a Thunderbolt display be used with just an iPad? 
    Hal

    Not that I know of since the iPad does not have a Thunderbolt port and I know of no adapters to go from the iPad digital adapter or component cables to the new display.

  • I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. Help

    I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • Have most recent macbook pro connected to thunderbolt via thunderbolt cable.  Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard.  Help

    Have most recent macbook pro connected to thunderbolt via thunderbolt cable.  Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard.  Help

    Hello QuinnDev,
    Thank you for posting in the Apple Support Communities.  It sounds like you are trying to use your MacBook Pro with a Thunderbolt Display in closed clamshell mode (MacBook Pro closed), but sometimes the display doesn't stay on.  I found an article that talks about closed clamshell mode.  You would have to fulfill the following requirements to use your display this way:
    Requirements for closed display mode:
    Power adapter
    External keyboard, mouse, or trackpad
    External display
    You can find all the steps and the full article here:
    Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
    http://support.apple.com/kb/HT3131
    I hope this helps!
    All the best,
    Sheila M.

  • HT5219 I have a macbook air (mid 2012) and a thunderbolt display. Do I absolutely need to connect the power supply together with the thunderbolt cable ? I found that the screen won't wake up if only the thunderbolt connection is plugged.

    I have a macbook air (mid 2012) and a thunderbolt display (27''). 
    Do I absolutely need to connect the power supply together with the thunderbolt cable ?
    I found that the screen won't wake up if only the thunderbolt connection is plugged. Is this normal ?

    I just got my ATD and late 2011 MBP up and running. I've not tried running without the power adapter from the ATD plugged in, but I just tried and didn't have any problems with the display not waking. You may want to take your query to the ATD forum - https://discussions.apple.com/community/peripherals/thunderbolt_display - perhaps someone there has experienced a similar issue.
    Good luck,
    Clinton

  • Can I connect my thunderbolt display's power cable to supply power to the new retina display macbook pro?

    I'm planning to buy a new retina display macbook pro, but I have a thunderbolt display and I use the display's power cable to supply the power to a macbook air. As the power connector on the new macbook pro is differet, It looks to me that I won't be able to connect it to the new computer. I'm I correct?

    You'll just need this adapter, which you can buy or order with the computer:
    http://store.apple.com/us/product/MD504ZM/A?fnode=MTY1NDEwMQ&s=topSellers

  • IPad Air 2 and 27 inch Thunderbolt display

    I picked up a new iPad Air 2 to replace my iPad Air. I keep a charging cable plugged into one of the USB ports on the back of the Thunderbolt Display. I use it for charging my iPhone 6, iPad Mini, and my previous Air. I use the TB Display when I plug in my Late 2013 Macbook Pro.
    Yesterday when I had my Macbook hooked up to the TB Display I plugged the new iPad 2 Air into the cable coming off the back of the display and nothing happened. No charging or iTunes did not open on the MB Pro. Tried a different cable, different port and nothing. Removed the cable and plugged it into the USB MB Pro and all was good. Mind you my other iPad Air, Mini and iPhone all work when I connect to the cable when it is plugged into the back of the TB Display.
    Any thoughts on this?
    Thanks...

    27" Display is must power ON,  so USB port will have DC power . (5V)
    27" Display is AUTO power OFF = if No display Video.
    Solution =  Connect MacBook the power ON 27" display
    since 27" Display is ON ==> now USB have power  to charged iPad Air 2

  • I recently bought a Macbook Air and a Thunderbolt Display and the laptop's power is supposed to come from the display, but the power cable on the display does not fit into the Macbook Air.

    I recently bought a 11" Macbook Air and a 27" Thunderbolt Display.The laptop's power is supposed to come from the display when connected, but the power cable on the display does not fit into the Macbook Air.

    If your MBair is a 2012 model, it has a Magsafe 2 power connection.  The monitor probably has the old magsafe connection.  If this is the case, you need this adapter.
    http://store.apple.com/us/product/MD504ZM/A?fnode=5a

  • Thunderbolt display: devices not discovered after using Mini DisplayPort–to–VGA adapter

    I have an interested problem related to using my MacBook Air in clamshell (closed) mode, connected to a Thunderbolt display. The problem appears to be related to moving my MacBook air between my office and my home.
    At the office, I use the MacBook Air with an external VGA display, connected via the Mini DisplayPort–to–VGA adapter. At home, I use the MacBook Air together with a Thunderbolt display. An Apple USB keyboard is also connected to the display.
    Mini DisplayPort–to–VGA adapter implicated
    The following sequence of events causes the problem to occur:
    Use the MacBook air (open) together with a VGA display, connected via a Mini DisplayPort–to–VGA adapter (depicted at right);
    Put the MacBook Air to sleep by closing the lid, and disconnect the Mini DisplayPort–to–VGA adapter (I am not sure if the order of these two steps is significant—I usually perform them almost simultaneously when packing up my MacBook Air and getting ready to leave the office); and
    With the MacBook Air still closed, connect it to a Thunderbolt display with a connected USB keyboard.
    At this point, I would expect to be able to wake up the MacBook Air by tapping on the space bar of the keyboard. However, what I have observed is that this does not wake the MacBook Air.
    I can wake the MacBook however by moving or clicking a Bluetooth mouse that is paired with the MacBook Air.
    At this point, although the MacBook Air is awake, and the display is working, the USB keyboard connected to the display still does not work. This is the problem, in a nutshell.
    Unplugging the USB keyboard from the display, and plugging it back in causes the MacBook Air properly to identify the keyboard.
    I used Apple System Profiler to save a list of identified devices at two points in time:
    Immediately after waking the MacBook Air by moving the Bluetooth mouse (at which point the USB keyboard was not working); and
    After unplugging and plugging in again the USB keyboard (at which point the USB keyboard worked fine).
    Many devices are enumerated in the second list that are missing from the first. For example:
    Keyboard Hub@fe110000  <class IOUSBHubDevice, id 0x1000378ef, !registered, !matched, inactive, busy 3 (37993 ms), retain 6>
    AppleUSBHub  <class AppleUSBHub, id 0x1000378f2, !registered, !matched, inactive, busy 1 (37987 ms), retain 6>
    IOUSBInterface@0  <class IOUSBInterface, id 0x1000378f4, !registered, !matched, inactive, busy 1 (37986 ms), retain 6>
    Keyboard Hub@fe110000  <class IOUSBHubDevice, id 0x1000378f6, registered, matched, active, busy 0 (7 ms), retain 10>
    AppleUSBHub  <class AppleUSBHub, id 0x1000378f9, registered, matched, active, busy 0 (1 ms), retain 9>
    IOUSBInterface@0  <class IOUSBInterface, id 0x1000378fb, !registered, !matched, active, busy 0, retain 7>
    Apple Keyboard@fe112000  <class IOUSBDevice, id 0x1000378fd, registered, matched, active, busy 0 (112 ms), retain 11>
    and many child devices…
    Using the Mini DisplayPort–to–VGA adapter appears to be a necessary step to causing this problem to occur. If I merely disconnect the MacBook Air from the display, let it go to sleep, and then reconnect it again, the USB keyboard will work immediately and can be used to wake the computer from sleep.
    Some devices are discovered even when the computer is in sleep mode. This is how it should work.
    The problem appears to be that when a Mini DisplayPort–to–VGA adapter has been used since the last time the computer was connected to a Thunderbolt display, the MacBook air does not discover devices completely when it is again connected to the Thunderbolt display while in sleep mode.
    Can anyone else reproduce this problem?

    Hi glraczon.support,
    It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
    Here is an article that may help you with that process:
    OS X Mountain Lion: About the Display pane of System Preferences
    http://support.apple.com/kb/HT5369
    Thanks,
    Matt M.

  • I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work?

    I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work? I understand that using a USB port connection is not fast enough for video editing. I read somewhere the G Drives don't connect well to MacBook Pro.
    thanks
    larry

    I doubt this can be relocated or moved so you might want to just repost in the macbook pro area.
      MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions
    Can you afford a new Thunderbolt case and cable? any case with FW800 is going to be slow 72MB/sec and less, and any new 1TB drive is capable of 75MB/s minimum up to 125MB/sec.
    Thunderbolt storage can of course when setup properly reach 100's of MB higher using multiple drives.
    Use what you have for a system backup or for secondary backup storage.
    you might be able to take the drive - most cases allow you to open and swap drives - and use this:
    G-Technology 1TB G-DRIVE mini High-Speed Portable Hard Drive                                   
    or this:
    http://store.apple.com/us/product/HB137VC/A/g-technology-4tb-g-raid-professional -high-performance-dual-drive-hard-drive?fnode=5f

  • My Thunderbolt display is no longer powering on. I don't have the green light on the charging cable.

    I came back from a trip, and there was no power being supplied to my Thunderbolt dispay. I checked all of the cables and powercords, but nothing seems to re-establish power to the system.

    Hey bertinot,
    Thanks for the question. I understand you are experiencing issues with your Thunderbolt Display. The following resource may help to resolve your issue:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Thanks,
    Matt M.

  • Is it possible to connect a MacBook Pro (prev model 2009, 2.26ghz) to an Apple Thunderbolt display:  will the cable fit?

    Is it possible to connect a MacBook Pro (prev model 2009, 2.26ghz) to an Apple Thunderbolt display:  will the cable fit?

    Sorry it won't work.  It will fit but the laptop can't communicate with it.  Please see many of the other threads here, specifically this one just above your post, that is discussing this exact question.
    Apple's specs for the ThunderBolt display state that it needs a ThunderBolt-enabled computer.  Your laptop has a mini-display port connection so it is not compatible with the new displays.

  • New iPad with retina display with 30 pin connector mirroring to TV with dvi adapter problems after software update

    Hi. Good day to everyone my New iPad with retina display 30 pin connector will not mirror to TV even with divi adapter after software update. Adapter works fine. Or is it a software glitch with IOS 7.04? I've tried resetting and reconnecting nothing seems to work.

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

Maybe you are looking for

  • File Utility - Find operation; How to retrieve all files in a folder?

    I am using Find operation of FileUtility service to count the number of files present under a given folder. I can not find the correct Regular Expression to match all files. The Adobe documentation mentions that * character is default which matches a

  • Aperture/Photoshop plug in and image size

    I'm having a problem I don't really understand.  I have Aperture 3 and I have CS5 that I'm trying to use as a plug-in for Aperture.  This is half an Aperture question and half a Photoshop one so I hope someone can answer it for me. In Photoshop I mad

  • OBI Administration Tool

    Hello gurus. Is there in Oracle BI Administration Tool a possibility to connect to another server without a terminal session (remote desktop connection)? I want to run from my computer the repository (be able to change it) without terminal session. T

  • LCDS Session Management using an Extension Panel

    We have an app that executes in an extension panel(InDesign) using both amf and rtmp calls.  The lcds server then makes rpc calls to an app which returns the data to InDesign.  How do you manage the sessions so that each individual user gets their ow

  • SUPM 2. 0 - Automated script management - Portal runtime error

    Hi, Whenever I click on "Automated Script Management" I receive this message: Portal runtime error. An exception occurred while processing your request. Send the exception ID to your portal administrator. Exception ID: 11:14_15/06/11_0008_11133350 Re