Ipad toggling wifi connection with airport express

my iPad when it is in sleepmode loses the wifi connection... when waking it, it restores, but sometimes wifi signal keeps flickering on/off...
on Macbook pro no problems...
thanks,
Stef

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Similar Messages

  • Sudden slow wifi connection with Airport Express 802.11n

    Recently, all of a sudden I noticed the speed of my internet droped dramaticlly from ~27Mbps to ~4Mbps (Speedtest.com) Comcast's blast. When I connect my laptop directly to the modem there is no problem with the speed. I tried restarting the modem, changing the channel/radio mode on the airport express, hard reset the airport epress, change the location of the airport express but nothing has changed. I notice that the speed fluctuate on speedtest.com meaning it ranges from 1-3 to 5-7Mbps. I test the speed on three other laptops but still got the same result. The only change I can think of that could effect this is the addetion of two computers to the network but I would still get the same speed when they are powered off.
    Thanks

    willcyrier wrote:
    Do I have to change anything on my computers?
    you use +airport utility+ (AU) (in your applications > utilities folder). launch AU, double-click on the icon of your extreme to enter manual setup, and go to the wireless tab. see this screen shot
    however, before you do, i recommend you download iStumbler (does not work with Snow Leopard) or AirRadar (it has a trial period) and note the channels other networks in your vicinity are broadcasting on. change the channel of your network as far away as possible from those.
    good luck !

  • Need help getting LG TV wifi connection with Airport Express?

    I can successfully hook the tv up to the network using the dongle PIN method on the Airport Express. It works fine until I turn the tv off. Then I have to go through the whole setup procedure again. Very frustrating. How can I get the Airport to allow the tv access when I turn the tv back on without having to do the setup again? I did not limit access to 24 hours. Not sure what I am missing. Thanks in advance for any and all help.

    The dongle is the little usb device that makes the tv wifi capable, it is assigned a unique PIN that I input into the airport express utility so my wireless network will allow it access. All that works fine, but I have to redo the whole setup everytime I turn the tv off. Have you any experience with this and can offer a hint on how to allow the tv access each time I turn it on?

  • Lose wifi connection with airport express

    Everytime I turn on the computer, there is no wifi connection.  The symbol is still at the top of the screen, but is gray rather than black.  I can click on it and it gives me the choice of my network or a neighbor's.  All I have to do is click on mine and it connects.  This is a real pain.  Anything I can do

    In System Preferences > Network and create a new network location.
    Test by restarting the iMac.
    In System Preferences > Network > Wifi > Advanced remove your network from preferred networks.
    Open Keychain Access under System remove your network.
    Copy /Library/Preferences/SystemConfiguration folder to your desktop as a backup. Then trash the main SystemConfiguration folder and restart the mac.
    The above steps basically make the iMac's network settings default.
    Join your network and remember in keychain, if prompted.
    Do a restart and hopefully the iMac will automatically join your network.

  • Ipad lost internet connection with airport express

    ipad lost internet connection

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • My two iMacs frequently go offline when I have our iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices no problem. Any thoughts on this?

    My two iMacs frequently go offline when I have my iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices the offline problem stops. Any thoughts on this?

    .....doesn't that seems to suggest the modem?
    That is what I have suggested....twice now. From posts above:
    My opinion would be that it is likely not the ISP, unless you have complete loss of Internet service for all devices at the same time......it is the Comtrend device....
    and
    I believe that the problem lies with the modem, and not the ISP signal.
    Your ISP will likely have a different opinion, though. Please keep us posted on your progress.

  • Trekstor pocketair wifi storage connecting with airport express

    Hey there!
    Is is possible connecting a Trekstor wifi Storage with airport express? I wanna use Itunes and this storage for streaming music with mit mac pro book (OS X 10.9.3)
    Or is it nessaray to use a apple wifi storage like airport extreme?
    Thanks!
    Best regards
    Michael

    Is is possible connecting a Trekstor wifi Storage with airport express?
    In theory, the Trekstor should be able to connect to an existing network either via a wired (Ethernet) or wireless (Wi-Fi) connection. The AirPort Express, depending on the model, can supply both.
    On the other hand, the Express DOES NOT support hard drives connected to its USB port; whereas, the Extreme and Time Capsule base stations do.

  • Can I create a home network withous dsl connection with airport express

    can I create a home network without dsl connection with airport express?
    So it means I can't connect to my HP Airprint/Wireless printer without exretnal connection through ISP?? Just need to print from my Mac and iphone. I have Vodafone Prepaid connection, which is directly connected to my Mac. Does that make an internal network possible?

    You have to set up the Air Port with an internet connection to set up a network. Do you have a modem? If yes you can set up the network. 

  • IMac losing wiffi connection with airport express when sleeping. I can't wake the iMac with the remote app on the iPhone. What is wrong?

    iMac losing wiffi connection with airport express when sleeping. I can't wake the iMac with the remote app on the iPhone. when i open airportconfiguration on the iphone is see that the imac isn't connected anymore. Normaly the airport express wake up the iMac but it doens't. What is wrong?

    anyone knows a reason for the item above?

  • Lost wifi connection with Airport Extreme.

    Lost wifi connection with Airport Extreme.   When I connect my modem directly to the computer I can access the internet, however as of this morning I am no longer able to access the internet via wifi on my airport extreme.  I have been using  airport extreme for 6 months or more and everything has been working fine.
    When I diconnect my  airport extreme and reconnect it I get wifi for 1-2 minutes working fine, but then i lose internet connection.  According to airport Utility everything is setup and connected and working ok, but I still am not able to access any webpages over wifi. 

    I have the same issue, I'm getting droppeds from wireless constantly

  • IPad and iPhone 4 and new 5s drop connection with airport express. This just started recently after working fine for a year. PC does not drop. Wifi signal fine. Help?

    Streaming music with airport express and Apple TV to 2 different systems. No problem with Apple TV. iPad and iPhone 4 and new 5s keep dropping their connection to airport express. Airport express connection to wifi appears to be fine. No dropping by windows PC. This just started recently after working fine for a year. Help?

    What does any of this have to do with the Apple TV?

  • How make wireless connection with airport express to  Yamaha Clavinova CVP-403 ?

    I would like to wirelessly connect my Yamaha Clavinova CVP-403. I would like to use a D-link DWA 125 and my airport express. Does anyone has any experience on how to do that?

    Hi Henry - you seem to be a very helpful and knowledgeable person and I am wanting to dive in to the depths of wireless working at home and could probably do with your advice. I certainly don’t have as much knowledge as Jaybee and if he’s had problems I am feeling a little apprehensive.
    I know that the first thing I need to do is get an ethernet modem to use with Airport Express as I currently only have a USB modem. I was wondering if you have any recommendations or if I should go straight for the Netgear DSL modem/router (DG834B) that Jaybee ended up with. Although the bit about ‘disabling the Airport Express resp. Extreme routers’ scares me rigid
    I have looked at ‘About this Mac’ and got the following for you – hope it’s helpful.
    OSX 10.3.9
    1.33 HGz PowerPC G4 processor
    Airport Extreme: Worldwide
    Firmware: 400.17(3.90.34.0.p11)
    Airport admin utility: 4.2 (v420.31)
    My ISP is also Tiscali (UK) - they have said they can only provide modem support on the USB modem they provide so once I switch to an ethernet modem I’ll be on my own. I have checked the Tiscali website and found the following modems, so I would assume (probably unwisely) that they would be compatible with my account...
    Zoom X6 5590 DSL Modem (55907200) 
    D-Link DSL-300T 
    Zoom Hayes ADSL Ethernet (H0-15805) (081580572) 
    Any help is very gratefully received.
    Regards,
    ... LIZ ...

  • Keep loseing my connection with airport express since Leopard

    Hi All.
    Before i upgraded to leopard from tiger i was connecting to the internet via my airport express with no bother at all. In fact my two laptops connect with airport still with no probs. But like i say now ive upgraded as i cant connect alot of the time. I know absoultely nothing about computers. Please someone please help.
    Many thanks

    Hi Nodyland,
    Try this:
    Power Cycle your Airport Express. Just unplug the Airport Express from the power source wait 2 minutes and plug it back in.
    This might be helpful
    Airport Software
    You might have to reset your Airport Express
    Airport Reset
    hope this was helpful

  • Ipad connects with Airport Express, but not wireless router

    I have a airport express that exends my network and is connected by an ethernet cable to the wireless router.  they are on opposite sides of the house from each other.  every other device i own has full bars wifi anywhere in the house.  but the ipad only seems to find the signal from the AE. 
    If i go in the bedroom with the wireless router, the signal drops to 1 bar.  if i unplug the AE along with all the other electronics for the TV/Receiver at night, the ipad loses the signal and cannot get a signal from the router, standing right next to it.  i have tried reset, hard reset, renew lease forgetting network, and all fails.  any ideas?
    I have a Verizon Ultraline series 3 model A90-9100EM15-10 and the firmware is up to date.

    Disclaimer - For me the Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture very different from that found in most 1st world nations, such as that in the two dominant North American countries. Written language has no tone. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    You likely have your reason for extending your network in this manner, but it seems that the AE is not really extending your router's network, but creating its own separate network that then extends your internet connection. This can be confusing to devices if you are expecting that they will switch between the two of them automatically.
    The iPad can only support one connect at a time. It sounds like you want it to be able to jump from the AE connection to a router connection on a whim when signal strength drops. I am not sure that the iPad's radio is that sophisticated. At best when the iPad looses a signal it could ask if you want to join any other network that it detects, especially if it has connected to that network in the past.
    AFA the router, some routers don't like iOS devices and just won't connect. When you go to Settings/Wi-Fi does the iPad see the router's network? If the iPad sees the router network, try configuring a connection by hand.
    Tap Other... and write the name of the router's network. Tap Security and select the type of security the router's network employs. Return to the previous pane and enter the password. Tap Join. If you can make the conection the iPad should remember this network in the future. Turn on Ask to Join Networks and hopefully when the iPad looses the AE signal in the future it will then ask you if you want to join the router's network.

  • Problem iPhone WiFi Connection to Airport Express with static IP addresses

    We have our Airport Express configured on the LAN with a fixed IP. It is not distributing IP addresses, or providing DHCP services; it simply links the WiFi to the LAN.
    To connect via WiFi you set a static IP for the wireless device and enter all IP information by hand (IP/Router/Mask/DHCP etc). Laptops can connect fine, and use the network.
    The iPhone connects to the wireless network ok (we tried with security on and off), however, it seems to be unable to successfully use the network. Any attempt to browse a web page using a numeric IP address, or regular IP address, fails.
    Has anyone successfully used the iPhone on a WiFi network with static IP addresses, and a Wireless access point that also uses a static IP address?

    The problem with static IP on iPhone was caused by the IP address being blocked by over-zealous network manager...

Maybe you are looking for

  • Creating a Time Delay Between 2 Waveforms

    Hi, Please bear with me while I explain what I'm trying to do :-)   Basically, in the attached LabView file ("flow vis + trigger-m.vi"), I am generating 2 signals: a sinusoidal waveform (used to drive an actuator) and a square waveform (used as a TTL

  • How do I get songs from my old Ipod onto my Iphone? I have a new apple ID for my phone... Do I need to use my old apple ID to get songs from my Ipod to my Iphone?

    I need help getting songs from my Ipod to my Iphone. I have a different Apple ID on my ipod... I am not sure of that Apple ID. How do I figure that out? How do I get my songs to all be on my Iphone. I do not want to repay for songs I have already.

  • Multiple Apple TV System Planning

    I am donating apple tv's to the Maine Children's Cancer Program to put in the kids treatment rooms. There will be 5 160GB apple TVs connecting to a mac mini with a 1TB WD hard drive. All of this connecting over a wireless network using an airport ext

  • Abr file associated with adobe reader instead of photoshop

    After installing Photoshop CC, my abr files are no longer associated with Photoshop by default. They now display an Adobe Reader icon, and when I attempt to change the default program for this file, I cannot get the change to apply. After right-click

  • STORED PROCEDURE & DATABASE TRIGGER

    제품 : FORMS 작성날짜 : 1995-11-07 * STORED PROCEDURE 1. Oracle Forms 4.5에서는 PL/SQL Code를 Server-Side에 저장하거나 Forms 내 Trigger, Procedure로 갖을 수도 있다. 다음과 같은 경우 Procedure를 Database Server에 저장하는 방법을 선택하는 것이 좋다. - Procedure가 Standard한 기능을 제공하여 다른 Tool이 공유할 수 있을