IPad update/restore error and itunes no longer recognizes device

I just updated my iPad to 5  today.  An error occurred during the restore and it is now stuck on the "connect to itunes" screen.  I have followed all the instructions to restart my iPad but now itunes will not recognize it.  When I follow these steps, the connect to itunes screen comes on but itunes does not start on my computer.  When I open itunes, the ipad is not listed as a device.  I've researched a ton of threads and have tried the following with NO success.
Different USB
Verified current version of itunes
Verified & restarted AMDS
Reinstalled itunes
Temporarily disabled security software.
Ran msconfgs
I am so frustrated that nothing has worked and my iPad is still stuck.  I wish I had never done the update.  Please help!

Unable to update or restore
http://support.apple.com/kb/ht1808

Similar Messages

  • I have an ipod touch  and Itunes does not recognize device.  What can I do?

    I have an ipod touch  and Itunes does not recognize device.  What can I do?

    See:
    iOS: Device not recognized in iTunes for Windows

  • My itunes said I needed an update, I unplugged the ipod touch and reset everything. When "connect to itunes" showed on the screen, I plugged it back in and Itunes no longer recognizes it.  I tried 4 usb cables, 4 different computers, all new itunes

    I've gone through all the troubleshooting of restarting computers & itunes and updating itunes.  Trying to put in to DFU mode.  I've tried everything.   iTunes just doesnt recognize this ipod.   I have multiple ipods/iphones, and everything else works.   I am eliminating the people who are saying it's a broken pin, that cannot be it, because immediately before that moment, it was connected, everything on my ipod was listed in iTunes.  It just promted me to update to 6.0.1 (or whatever the most recent is)  I also seen a lot of issues posted on the web of people who had jailbroken phones.  This ipod touch is standard, there were no jailbreaks or anything used ever.  
    There was a program called Wondershare Dr.Fone, which is said to be a photo recovery tool for ipods, to retrieve recently deleted photos.  (Guess I shouldn't have been trying to do that)  I downloaded this trial and when it opened it stated that Itunes and this could not run at the same time.  It shut down iTunes automatically.  At that point, I didn't do anything more with the Wondershare Dr. Fone, I didn't try to run the program or anything.  iTunes prompted me that the device needed to be upgraded to 6.0.1.  I had an option to download or download and install the updated 6.0.1 from Itunes.  I clicked on download only.  So iTunes was downloading the new version from my iPod Touch.  I shut it down the Wondershare Dr. Fone, unplugged the iphone from itunes/computer, went in to settings and did a master reset.  I plugged the device back in to the computer when the iTunes logo and usb came on the screen, and the computer/iTunes doesn't recognize it anymore.  I've tried 4 different usb cables and four different comuters all with up to date iTunes software.  I did not break the port either, nothing is inside the port, or blocking it in anyway.  All 4 computers and usb cables connected fine to other ipods and iphones.  
    So the questions are:
    How can I get my ipod out of restore mode (iTunes logo and usb cord sybol) without iTunes recognizing it?
    What could I have possibly done to this ipod? 
    Why doesn't anyone have the answer anywhere on the internet?
    (Note:  Even if the Ipod is placed in DFU mode, iTunes does not recognize it) 
    Please help!
    Yours Truly,
    Me & My UnRestorable IPOD TOUCH

    Hello Philly,
    I believe that when you reset your ipod(command given from the computer, right?)  touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
    I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
    ~Remember, I am just giving an educated guess on limited information

  • IPod restore error AND iTunes won't redownload. HELP.

    So I managed to let my battery die completely on my iPod by playing too much scrabble, but when I plugged it into the computer it said that my iPod was in recovery mode and I should restore it. I've tried to restore it 100 times but I get the iPod restore error {14} every time. I know there's another topic about this, but when I went through each and every single step that was offered, I uninstalled my iTunes, and when I went to download it my computer tells me there's something wrong with the setup file and won't allow it through, no matter how low the security settings are. I'm about to lose my mind here. When I plug my iPod into another computer it's not recognized at all. It won't charge with a regular just charge cable, nothing. Save me please.
    Message was edited by: Chloe W

    I fixed the iTunes part. But even after all that I did get it redownloaded, my iPod still doesn't restore.

  • PC and iTunes no longer recognize my iPhone 4?

    Hoping someone can help as I'm completely at a loss and super frustrated.
    My PC & iTunes no longer "see" my iPhone 4 when I connect it to my computer. I've tried all my USB ports- they all charge my phone, but it does not show up in device manager, etc. I have also tried updating iTunes, reinstalling iTunes, restarting my iPhone, completely charging iPhone before plugging in, restarting my computer a billion times, and making sure it is not conflicting with any security software. I've also gone into MSconfig and followed these directions: http://support.apple.com/kb/HT1275. Nothing has worked.
    I am running Windows XP Media 2002 SP2. I have an iPhone 4 with iOS 6.1.3. I connected my phone to my computer back in January before updating to 6.1.3 and computer recognized phone just fine. Have not tried to plug in since, but now I really would like to pull the pictures off my phone and start fresh.. But can't.
    Help?

    Have you tried connecting the phone to another computer? You can try to connect to another computer that has iTunes connected. Make sure that computer does not have iTunes set to automatically sync. After that, you should be able to import your pictures from the Camera Roll via the Scanner and Camera Wizard for older versions of Windows, or via the Import manager in the newer versions of Windows.
    Have you checked to make sure your Windows is up to date? Is SP2 the latest update for that version of XP? While you say that you did connect to the computer some time in the past, the tech specs for the iPhone 4 show that Windows XP needs to be SP3.

  • I can't sync music and iTunes no longer recognizes my early nano.

    I have an early nano, 2G storage.  Original install was on my desktop, which had a harddrive crash.  Reinstalled on laptop while desktop was being fixed, no problems for a while.  Put back on desktop once repaired.  I can no longer sync music to my nano from either computer, iTunes on the desktop does not recognize the nano when it is attached, and iTunes and iStore don't recognize my name or password.  I'd really like to update my playlist.  What are my possible solutions?

    Hello Christinaaa_,
    The following article provides some useful troubleshooting that can help resolve this issue.
    iOS: Troubleshooting USB-related alerts when syncing
    http://support.apple.com/kb/TS5254
    Cheers,
    Allen

  • I have a Samsung tablet and iTunes will not recognize device to synch

    I have recently purchased a movie to download and synch to my Samsung tablet.  iTunes will not recognize the device.  Everytime I try to bring up movie it wants to keep downloading it.  Any suggestions?

    Itunes does not sync to non Apple devices.

  • HT201413 HELP! My Ipod touch is locked in the restore mode, and ITunes does not recognize it! what do i do? was just trying to update to latest version:(

    i plugged in my ipod touch last night to update to latest version and there was some sort of problem and it said i needed to restore so i did. And now it just keeps saying it can not find my ipod. it used to say "crystal's Ipod" now it says "ipod" on the left. HELP!

    Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.

  • Iphoto recognizes ipad won't sync and itunes does not recognize it

    ***?

    my new ipad will not be recognized with itunes but shows up in iphoto too.
    I just upgraded to snow leaopard from tiger to get this thing to wk and it still doesnt. I downloaded the latest iphone updates and wonder if the SDk was part of that. I am going a bit nuts trying to get this thing to wk--!
    How did you find the SDK.

  • Mac and iTunes no longer recognizes ipod shuffle

    All of a sudden, my iTunes doesn't see my iPod shuffle (2nd gen) anymore. It also doesnt appear on the desktop.
    When I plug it in, the little orange light flashes, so it is charging. And the ipod itself still works.
    I tried all the steps in this document, including updating iTunes and restarting my mac. I know the USB works because the iPod charges.
    https://www.apple.com/support/ipodshuffle/assistant/itunes/#section_4
    what can I do?

    Update: I disconnected the mini for a while and just now tried re-connecting it. This time the ipod showed up in the menu after a minute or two. It still doesn't want to charge through the usb, but I can continue to use the wall port for that if I have to. Good news is I can now update my songs again =)

  • ITunes no longer recognizes devices

    I've had to re-install Windows after a virus caused my PC to crash. Now I have re-installed iTunes but my pc doesn't recognise my iPad or iPhone anymore. I've tried different cables, USB's and everything in the troubleshooting/help guide on the website.
    Can anybody give me anymore clues please?
    PS Both devices are working fine when connected to my laptop so there are no problems there either.....

    Have you seen this Article...
    Device Not Recognised
    http://support.apple.com/kb/TS1538
    Also, See Here
    http://www.apple.com/support/itunes/devices/

  • My iphone 5c says connect to itunes. It won't update/restore; error message (27) comes up. I also haven't backed the phone up since last year. Help

    My iphone 5c says connect to itunes. It won't update/restore; error message (27) comes up. I also haven't backed the phone up since last year. HELP.

    Hi there owain11,
    It looks like that particular error may be realted to a hardware issue. Take a look at the article below for more information. 
    Resolve iOS update and restore errors
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.
    -Griff W. 

  • Tried restoring iPad to prepare it to sell, encountered error now iTunes won't recognize.  The iPad just shows the connect to iTunes even after restarting.

    I tried restoring iPad1 to prepare it to sell, encountered error during the restore.  iTunes dispalyed a message that there had been an error.  My iPad1 is just showing the image to connect to iTunes, even after i try restarting the iPad1.  I've also restarted my PC and iTunes will not recognize the iPad1.
    iTunes is and will recognize my new iPad3 just fine.
    How do I get my iPad1 to come back to life?
    Thanks!

    No luck.  The article says to press and hold the home button, then plug in the usb cable.  When i do that, I still just have the connect to itunes image on the iPad, and iTunes is not recognizing the iPad.

  • HT4623 I have plugged in my ipad to my computer and Itunes is up on my computer but where do I find these things in Itunes, # In iTunes, select your device.  # In the Summary pane, click Check for Update, to update my ipad?

    I have plugged in my ipad to my computer and Itunes is up on my computer but where do I find these things in Itunes, # In iTunes, select your device.  # In the Summary pane, click Check for Update, to update my ipad?

    Tap to enlarge.

  • Updated to ios7 and iTunes 11.1, Music won't play or Error sign ! when clicked on

    After updating my ios and itunes my music on my ipod will not play and an error sign ! shows up to the left of every song when clicked to play. Also when i undock the ipod it would show that all my music is gone! But when i redock the ipod it shows that all the music is still there! This is really frustraing to me because i have spent countless hours organizing my playlist and it would take about the same amount of time to redo them. Please Help!

    having the same issue, everything i have tried doesn't seem to work. never had a problem until i installed 11.1
    all my albums are now in the itunes library but even that isn't making any diffrence, spent a good few hours yesterday reinstalling my music...just a waste of time, same thing happened. will keep you posted if i find any answers

Maybe you are looking for

  • How to send a dashboard page as selection with ibot

    Hi, I am trying to send a dashboard page via email, but with a previous selection I have done through prompts. This is what I have done: 1.Created the selection and saved as "Generic" 2.Selection is saved in my user OBIUSER under /users/obiuser/_sele

  • Manual for ms-7223 lies!

    Hi, hope someone can help me with this as it's driving me crazy! I downloaded the manual for my board (ms-7223) because I couldn't find any FSB settings in the BIOS. The manual shows a picture of the Cell_Menu with FSB options (below) What's weird is

  • Sorting of Items in LookUp Flat field

    Hi all, I have a Flat table "Numbers" with values from 1 to 20. This is made as a Lookup field in the main table. When i see the ordering of these values in the lookup field, it shows "1,10,11,12,13,14,15,16,17,18,19,2,20,3,4,5,6,7,8 and 9" which i b

  • How to run a BI query from SSM

    HI, My client would like to drill down to a BI query where the starting point is a KPI. For eg, we have a KPI "Turnover". When we are at kpi detailed level for a specific period, we would like to run a query to have detailed information for turnover

  • Header conditions in purchase order.

    Hi experts, I want to omit the header and item conditions for a purchase order with document type 'CS', I mean I want to that purchase order doesn't have conditions when I check it in transaction me23 or the condition value be zerou2026. Does anybody