Ipad update results log in problem

Hi I have just installed the ios 8 and i cant log in to my ipad anymore.
I am entering my passcode then it apperas the following:
"update completed, there are just a few more steps to follow and then you are done"
and then its requesting my apple id psw in order to finish setting up icloud, i enter my psw and then it goes to the first page again asking fro my passcode and all the above appears again and again....
what i am supposed to do?
thank you in advance.

Permissions repair completed "The privileges have been verified or repaired on the selected volume" . When I restarted and logged in, using the same account name, the problem still existed.
So it isn't a simple permissions issue.
I'm puzzled: after the successful software update
Well, apparently not so successful.
, why can't I successfully log in using one account while I can successfully log-in on another account?
That's what BDaqua is trying to test with having you start in Safe Mode. There's various things Safe Mode disables, some of which vary from account to account. If you can start in safe mode then it's probably something like a startup item that is giving you problems and you can tell it not to include that item.
[Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
[What is Safe Boot, Safe Mode? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=107392]
[Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]
What is the best way to prevent similar problem from happening again in the future?
Check the list of suggestions in my long post [here|http://discussions.apple.com/message.jspa?messageID=8746867#8746867].

Similar Messages

10.5.7 update results in major problem with external drives

yesterday I did the 10.5.7 update and now I can't access any of my external hard drives. The message is "you do not have proper privileges". Have tried downloading/installing the combo update, running permissions repair with Disk Utility, even tried reinstalling my original 10.5.2 system with 'Archive and Install', still the problem persists.
In the privileges dialog, the setting is 'custom' and I can't switch anything back to "read/write".
I'm sure there are other problems but this is quite major as all my work files are located in external drives.
help!

Is it only Lacie drives you've had trouble with, or is it other brands as well?
This is probably a separate problem, but when I updated to OS X 10.5.7, my Buffalo hard drives disappeared. See these threads:
External Hard Drives not recognized now by 10.5.7
http://discussions.apple.com/thread.jspa?threadID=2010075&tstart=0
Don't install 10.5.7
http://discussions.apple.com/thread.jspa?threadID=2004304&tstart=60&start=15
Buffalo has since released a patch:
http://forums.buffalotech.com/buffalo/board/message?board.id=0101&thread.id=9986

HT4623 We are unable to updates our apps on Ipad , tried to log out of ID as well

We are not able to update Apps on our ipad though tried logging out and in
Does any one knows the Remedy?

There are many posts about this same issue. Apparently there's a problem with the Apple app site. You'll just have to wait and try again later.
 Cheers, Tom

After 11.1 and ios 7 update, cannot log into ipad. says apple ID already in use. no issues prior to updates.

After 11.1 and ios 7 update, cannot log into ipad. says apple ID already in use. no issues prior to updates.tried both primary and backup emails. says both already in use

randers4, thank you for the suggestions.
1) I have contacted Verizon and they are not blocking "premium" or 3rd party text messages.
2) The Apple ID login issue occurs regardless of wi-fi network location, or even if I am not on wi-fi at all. Router settings are irrelevant to this problem.
3) I have already played around extensively with date and time settings. This did not fix any issues.
Any other suggestions? I had another call with Apple support and they are of the opinion that I may need to have the phone totally replaced, which is unacceptable unless it is free of charge.

IPad update Error- There was a problem downloading the software for the iPad .... network settings

"iPad update Error- There was a problem downloading the software for the iPad X you do not have enough access privileges for this operation. Make sure your network settings are correct and your connection is active, or try again." is the error. The rest of iTunes, sycning, and ipad operations work. I am on OSX 10.6.8. iTunes is the most recent addition.
I've been having this problem for a while but it has yet to go away. Any help please?

OK. Good. The most likely culprit is either your firewall or anti-virus software. Temporarily disable both while you are doing the update (then, of course, turn them back on when you are done).

For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent problems when logging into some websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop compuHelp

For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent problems when logging into some websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop computer. The wifi unit is a iinet BOB 2 unit. The other computer works completely fine. The only problem is with this apple iPad? I have rebooted iPad and rebooted BOB 2 wifi unit but this has made on difference to the problem?
Can anyone suggest any HELP
Thank You

For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent problems when logging into some websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop computer. The wifi unit is a iinet BOB 2 unit. The other computer works completely fine. The only problem is with this apple iPad? I have rebooted iPad and rebooted BOB 2 wifi unit but this has made on difference to the problem?
Can anyone suggest any HELP
Thank You

I've tried and tried several times to Connect my device to my PC and follow the onscreen instructions in iTunes to download the update from Apple. Problem is iTunes doesn't connect to my iPad so that I can update to iOS 5. I don't see the iPad icon when

I've tried and tried several times to Connect my device to my PC and follow the onscreen instructions in iTunes to download the update from Apple. Problem is iTunes doesn't connect to my iPad so that I can update to iOS 5. I don't see the iPad icon when iTunes loads. I have looked in my computer and see the iPad is recognized. Any one else having this problem? This is also happening with my iPod
Thank you, Ripley

I haven't updated yet. Apple's download servers have been too busy. Did you know you can update via wifi instead of connection to your computer?
Here's a description of the update. Not a lot of changes for iPad 1/2.
iOS 5.1 Software Update
http://support.apple.com/kb/DL1504
You can wait a while & update at your convenience.
 Cheers, Tom

The ios8 update is causing innumerable problems with my ipad. The info from my calendar just disappeared, I am typing blind with the keyboard most of the time, and I cannot upload pics or paste to FB. When will this be fixed and what can I do in the

The ios8 update is causing innumerable problems with my ipad. The info from my calendar just disappeared, I am typing blind with the keyboard most of the time, and I cannot upload pics or paste to FB. When will this be fixed and what can I do in the Meantime?

Have you tried yesterday's update to iOS8.0.2?
iOS 8.0.2
This release contains improvements and bug fixes, including:
• Fixes an issue in iOS 8.0.1 that impacted cellular network connectivity and Touch ID on iPhone 6 and iPhone 6 Plus
• Fixes a bug so HealthKit apps can now be made available on the App Store
• Addresses an issue where 3rd party keyboards could become deselected when a user enters their passcode
• Fixes an issue that prevented some apps from accessing photos from the Photo Library
• Improves the reliability of the Reachability feature on iPhone 6 and iPhone 6 Plus
• Fixes an issue that could cause unexpected cellular data usage when receiving SMS/MMS messages
• Better support of Ask To Buy for Family Sharing for In-App Purchases
• Fixes an issue where ringtones were sometimes not restored from iCloud backups
• Fixes a bug that prevented uploading photos and videos from Safari
For information on the security content of this update, please visit this website:
http://support.apple.com/kb/HT1222

PROBLEM WITH RECENT UPDATE TRIGGERING IPADS STUCK IN RECOVERY MODE PROBLEM

I am wondering how many other ipad owners are having a problem getting their device out of the recovery mode after the recent update? I have been in contact with the Apple Express service and been assisted in taking my ipad through the restore process 3 times, and it hasn't worked.
The last advisor told me that if that last restore process did not work it meant my ipad would need to be shipped off for service. I have noticed a number of others posting about this problem in the last week, however. Is there an anticipated fix for this issue? Or, do we all need to send our devices in?
I feel I have received cheerful customer service from some very patient Apple reps, but see any solutions for the problem being offered. In addition to the inconvenience of shipping my ipad for repair, I am also concerned about my AT&T unlimited data/flat rate subscription being lost in the process. Has anyone resolved this problem, and was it through an offsite repair job?

I bought a refurb ipad 32gb. I have noticed when itunes via wifi fails to do an app update, it screws the whole ios; thereby forcing ipad to go into recovery mode. I thought Apple learned the hard way not to allow one app to bring down the whole os!! This is the 5th time an app caused this. last time Apple forced me to reinstall Itunes, wasted 2 hrs.
I worked hard saving up enough funds to get an iPad. Yes, i even paid Applecare too. If this can be fixed, I want a replacement or a full refund.

HT4623 unable to install ios7.04 to ipad. I had no problem installing it to iphone 5c. Never had any problem before. installing any of the IOS 7 updates, just the IOS7 04

I am having a problem installing IOS 7. 04 to IPad. I had no problem installing it on my iphone 5c. I have didn't have a problem with any of the other installs. I wonder if anyone else is having a problem.

Thank you very much for your quick response. It took two tries, but it worked, it through me a curve, it directed me to plug in to my computer and go to iTunes, so that is how I did it. I am not very iPad savvy, so for me , it was a challenge . It also brought the iPad back to original set up. Had to set up all apps again. Oh we'll, I appreciate your help. Thanks again.

IPad update failed, error 1602

Does anyone know how to fix this?
I connected iPad to windowx xp desktop with latest itunes and it asked to update the iPad. After the update failed, it keeps showing connect to itunes on iPad, yet the itunes doesn't seem to recognize it. Also as I connect iPad it shows in the bottom right *Apple Mobile Device (recovery mode)* and Found New Hardware window pops up. Does this mean I will lose all apps and saved files/books?
Message was edited by: HLemmik

HLemmik wrote:
Thanks but I'm not even able to recover at the moment.. I called in and did what the support suggested, uninstalling all 3 apple programs + itunes and quicktime and restarted, reinstalled itunes, restarted and plugged ipad back in. Result is still the same. iPad shows connect to itunes and my computer displays "Found New Hardware" window while itunes doesn't show any devices. So I'm guessing something with drivers?
This is what it shows in device manager:
http://designftw.com/iPad/ipad_devicemanager.jpg
I wish I didn't do the update at all
You need to do the updates, because they slowly improve the performance of your iPad. And soon, iOS 4.0 is coming, which you will absolutely want, because it take the iPad to a whole new world.
I'm not even close to being an expert on Windows, not having used it in about 10 years. But I've monitored this board for a while, so here are some suggestions:
1. Try a different USB port, if you have one. Don't use a USB hub, try to connect directly to your computer.
2. If possible, see if your cable is damaged. It happens.
3. Before doing this, just make sure you have complete backup files from your most recent backup. I'm not sure where to find them, but as I recall, they should be located in your iTunes files. Then, completely reset and wipe your iPad, by going to Settings, General, Reset. Again, don't even consider this if you can't find your backup locations. You might want to search these discussions with "backup AND Windows AND location" to see where they're located.
If none of this works, go to an Apple Genius. He can plug you into a Mac to see if the iPad has a problem.
Again, it's not the update that caused the problem, it's a corrupted file or something. You'll fix it, so don't worry.

How can i log onto my ipad when the screen says ipad is disabled log onto itunes. i logged on to itunes but nothing is recognized

Hi,
I had forgotten my password and made many attempts to log on to my Ipad. Finally after remembering the password it was to late to enter it. My screen says "Ipad is disabled, log on to ITunes. I logged onto ITunes and nothing is recognized an I cant find a category for correcting the problem. Any help will be greatly appreciated. Thanks

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

IPad update (epic) failed!

I updated my iPad, and when it asked for my apple password, it said it was the WRONG password. So, I hit the 'SKIP THIS' thinking I could go back in later. Now the none of my internet-using apps load -- no FB, no APPS, no Apple Store --

HLemmik wrote:
Thanks but I'm not even able to recover at the moment.. I called in and did what the support suggested, uninstalling all 3 apple programs + itunes and quicktime and restarted, reinstalled itunes, restarted and plugged ipad back in. Result is still the same. iPad shows connect to itunes and my computer displays "Found New Hardware" window while itunes doesn't show any devices. So I'm guessing something with drivers?
This is what it shows in device manager:
http://designftw.com/iPad/ipad_devicemanager.jpg
I wish I didn't do the update at all
You need to do the updates, because they slowly improve the performance of your iPad. And soon, iOS 4.0 is coming, which you will absolutely want, because it take the iPad to a whole new world.
I'm not even close to being an expert on Windows, not having used it in about 10 years. But I've monitored this board for a while, so here are some suggestions:
1. Try a different USB port, if you have one. Don't use a USB hub, try to connect directly to your computer.
2. If possible, see if your cable is damaged. It happens.
3. Before doing this, just make sure you have complete backup files from your most recent backup. I'm not sure where to find them, but as I recall, they should be located in your iTunes files. Then, completely reset and wipe your iPad, by going to Settings, General, Reset. Again, don't even consider this if you can't find your backup locations. You might want to search these discussions with "backup AND Windows AND location" to see where they're located.
If none of this works, go to an Apple Genius. He can plug you into a Mac to see if the iPad has a problem.
Again, it's not the update that caused the problem, it's a corrupted file or something. You'll fix it, so don't worry.

My iPad updated and wants a security code. I tried the one from my phone and it doesn't work - I never entered a security code. How can I get in now?

?My iPad updated and now wants a security code for access and I never gave it one. I tried code I used for my phone and it doesn't work. How can I access now?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

IPad, iCal and iTunes sync problem

Early last year, I posted (https://discussions.apple.com/message/18503738#18503738) that syncing between my iPad 3 and my Snow Leopard iMac behaved oddly. AppleCare Support dweebs had failed to resolve the issue and no one on here managed to come up with any suggested fix.
However, for no apparent reason, the problem stopped and I stopped monitoring this august and highly esteemed forum and all went well ...
... until recently.
I sync via a USB cable and I do not use iCloud (as I'm on Snow Leopard) save for Find My iPad, all other iCloud options are switched off. All other app syncing appears to work correctly, it is only iCal and Calendars that don't.
Just why things have started to go wrong now, probably in the last three or four weeks, I do not know but now the following syncing errors occur ...
1) On the iPad: new appointments or changes to appointments made on the iPad are not synced to the iMac;
2) On the iMac, changes to appointments already on the iMac are shown on the iPad as both the new and old timings/details, not as replacements;
3) On the iMac, new appointments are made in the default (or last) calendar used. These are then edited as required, with the details put in and, if necessary, calendars changed. On the iPad, however, these will show as both "New event" in the default calendar and as the edited correct appointment, not just as the finalised entry;
4) Appointments deleted from the iMac are not deleted from the iPad.
In other words, changes on the iPad are not synced across to the iMac and changes on the iMac are synced twice, once as the unedited appointment and once as the edited appointment - if an appointment is deleted it remains on the iPad.
When the original problem arose (similar but not identical) the Apple dweebs suggested deleting my iCloud account (not synced, used only for Find My iPad) but doing that this time does not remove the bug.
I'm running a 27" quad-core i7 iMac under MacOSX.6.8 (Build 10K549), iCal v4.0.4 (1395.7) and I sync via USB and iTunes v11.0.2 (26). The iPad is a 64GB 4G/wifi iPad 3, currently running under under iOS6.1.3. To the best of my knowledge, all available updates have been applied to both devices.
I have deleted all calendars off the iPad by deselecting Calendars in iTunes' iPad tab, turned it off. Swicthed off the iMac, Safe Booted and run OnyX full suite, I have then Single User booted, run fsck -fy three times then run applejack AUTO restart, then rebooted the iMac, rebooted the iPad, sync'd without Calendars then resynced with the Calendars selected again.
I had hoped that this would remove any cache files, temporary files, stuck RAM or whatever else could conceivably be causing this bizarre behaviour - to no bl**dy avail! It is behaving exactly and frustratingly as before!
What on earth is going on? if I can't use my iPad as my main calendar and add new appointments when out and about and have them synced properly and reliably to my iMac then the whole thing is a waste of time andI shall have to revert to a paper diary again!
HELP!!!!! Please, before I go mad with frustration!

I'm not sure whether getting no replies to this (or the earlier) query is something of which to be proud - or terrified!
Am I the only person in the world with this bizarre insoluble problem? if so, why me? Am I a Chosen One or, more likely, someone to be punished for a lifetime of misdeeds!
But there is progress. I have no idea what happened at a technical level or why, but the matter has now resolved itself and things are syncing normally. Until the next time!
Perhaps there is a clue somewhere in the following ...
I run my iMac 24/7 and thus I rarely close iCal on the iMac and when i do it is usually by accident. The same applies to Calendars on the iPad, although I do reboot from time to time.
Anyway, I installed some software on the iMac which required a reboot and, as susual, iCal opened via Preferences > Accounts > Startup items - only this time I was presented with a perfectly blank calendar. A message appeared, from within iCal (oh, how I wish i had noticed what it actually said) saying something along the lines of "importing calendars". This took a little while and it wasn't instant - maybe it does this every time it reatrts but too fast for me to notice.
After this "import", if indeed that's what it was, the syncing was corrected!
Coincidence? Cause and effect? Magic? Too many magic mushrooms for breakfast?
If that is what resolved the issue, then how can I cause an import deliberately for when the syncing goes astray again and just what does an "import" do that a normal launch doesn't and which might have resolved the glitch?
I have had this "import" message before, but very very rarely, so it may well have resolved the syncing issue last time and I just didn't make the possible connection.
Does that help anyone come to my rexcue with an explanation and, possibly, a strategy for preventing or deliberatly correcting syncing issues in the future?

Ipad update results log in problem

Similar Messages

Maybe you are looking for