IPad Video import query

When I last connected my iPad to PC it automatically imported photos and videos as I have done on many occasions. Photos are fine on both devices, but videos are lost. Empty MOV files are visible (0 bytes) and give error message: no URL found, when I try to open them. Does anyone know what happened and if/how to fix?

http://help.apple.com/imovie/ipad/1.3/index.html#knac787725

Similar Messages

TS3719 iPad video import to iMovie for ipad

Does anyone know how to take a video taken on an ipad3 and import into iMovie for iPad? My video clips do not show up. I purchased iPhoto and can send the video over that way, but it does not import correctly. I get a yellow triangle error.

http://help.apple.com/imovie/ipad/1.3/index.html#knac787725

Can't import iPad videos in Final Cut Pro X

Hello there, anyone knows if there are recent issues in importing iPad videos into Final Cut Pro X?
I follow the ordinary workflow, and it all seems ok but at the end of the importing process a "!" yellow triangle remains attached to the imported clip and this one can't be played.
Already tried to make a high quality conversionand/or a proxy, the conversion process seems to start but it doesn't go further than 0%.
Thanks in advcance for your help.
PS: the videos have been teaken with the "Video Pro" app an then exported to the iPad "film roll".
PPS: in the importing window the clips can be played normally.

Russ, I succeed in importing some files by transcoding them in a proxy one by one (that is not in a work queue). Some other files simply stops the rendering process and make it hang until the closing of FCPX. Thanks for your time.

IPad 3 audio sync issue when video imported into CS5.5

Hi everyone, long time lurker here, love the support you guys are giving!
I'm hoping you'll be able to help with an audio sync problem I'm experiencing with videos recorded with the latest iPad 3 (well, that's what I'm calling it anyway).
I believe the iPad 3 recording format is 1080/30p with 44.1Khz / 16 bit audio, but when I match those settings on a Premiere Pro CS5.5 project (or try 48KHz audio as a test), the audio gradually goes out of sync. If the video is several minutes long, it becomes quite obvious, and by 10 minutes, it's terrible!
I should add the file plays back fine on the iPad itself and was imported to a Mac via iTunes. It also plays fine on the Mac itself in Quicktime.
Does anyone have any suggestions on project settings that'd work?
On a related note, I additionally captured the audio using a Zoom H2n which i intended to replace in Premiere, but foolishly I captured it at 48KHz, rather than the 44.1KHz of the iPad video file. Should I resample it?
I actually managed to line-up the 48 and 44.1KHz waveforms from the iPad and Zoom in Premiere quite accurately, but again both gradually go out of sync with the video...
I'm running Premiere Pro 5.5.2 on Mac OSX 10.7.3.
Any suggestions greatly appreciated!
Gordon Laing

To update my original post, I have found this problem happens about half the time.
Sometimes there's no issue and the audio is in sync when imported into Premiere, but at other times it's way off.
I did however find a workaround which has resolved the problem on my iPad3 videos which were out of sync and that was to first import the video clip into iMovie on the Mac first, then simply export it again using the 1080p option. The subsequent file is much larger (so there's been an annoying re-encode), but when imported into Premiere, the audio is at least now in sync.
I used this to fix the audio on a couple of the videos you can find on this page (all of which apart from the last one were filmed on the iPad3)
http://www.cameralabs.com/features/Working_holiday/
Since the video wasn't exactly critical to start with, I'm not too bothered by the re-encode.
Let me know if this fix works for anyone, and also if anyone comes up with a different solution.
Thanks,
Gordon

IPad video poster frames white box with grey tv, looking for fix

I have searched the forums and can not find a working solution.
I have mpeg4 Apple TV/ iPad videos that I have added to my iPad through iTunes.
When they came in, all the poster frames were black, as that's the first frame of video. I manually went though iTunes and set each poster frame.
I then sync and reboot on the iPad. Poster frames are now white squares with grey tv.
Repeated the above twice.
Signed in and out of home share (as suggested by one forum) and reboots iPad.
Have removed all files from iPad and then added back. Back to black poster frames.
I have no way to check if the poster frame are correct as in iTunes, I can only see files on the iPad in list view. When I do get info, there is nothing about the poster frame.
Any help or ideas would be appreciated.
Ipad2
iOS 6.1.2
iTunes 11.0.1
MacPro OSX 10.7.5
Thanks!

BUMP.
Still looking for an answer on this. In addition to the above:
I have tried setting the poster frames inside of iTunes
I have tried setting the poster frames outside of iTunes and then importing onto the iPad though iTunes.
Setting ratings made no difference.
I can not add artwork manually, it is greyed out in the info pain and not accessible.
Still same results. Now all video files are a Grey Square with a different symbol depending on what "Media Kind" the file is set to. And in fact, when I do this, the files disappear from iTunes and I can no longer find them.
Apple, Please help!!
Reading the Forums, this is a problem that has yet to be answered.
Ipad2
MC770LL/A
ios 7.1.1

I have the 2nd Gen iPad and imported my photos from my computer to my iPad awhile back. Now I'd like to sync it to new MacBook Pro and my albums are not showing up? Anyone know how to fix this?

I have the 2nd Gen iPad and imported my photos from my computer to my iPad awhile back. Now I'd like to sync it to new MacBook Pro and my albums are not showing up? Anyone know how to fix this?

You'll have to transfer them from the pc to the mac.
There are some options
Importing personal photos & videos from device to your computer
http://support.apple.com/kb/HT4083?viewlocale=en_US&locale=en_US
Managing photos/videos
Iphoto app for iOS
http://www.apple.com/support/ios/iphoto/
photo manager pro
https://itunes.apple.com/sg/app/photo-manager-pro/id393858562?mt=8
Photo transfer app
http://www.phototransferapp.com
Dropbox
https://www.dropbox.com/referrals/NTMzMjg0NjkzOQ?src=global9
Picasa
http://picasa.google.com
photo manager pro
https://itunes.apple.com/sg/app/photo-manager-pro/id393858562?mt=8

How do I email video imported from camera?

How do I email video imported from digital camera? It is a short video not more than a couple minutes long. I am using a PowerBook G4.
Thanks for any help.

BGreg wrote:
Video's get big quickly, however, assuming it's not too big, just attach it to your email and send it along.
This isn't a reliable method because you just don't know what the limits are on both ends. It is much more reliable to use a free file transfer service like Dropbox, Box, Google Drive, Amazon Cloud Drive, YouTube, etc and just send an email link.
Eustace Mendis wrote:
You should compress the video file before transferring. Just click on the name video file and go to the File menu. Compress ... is there. The compressed file will have the same name as the original, with a .zip suffix.
That's not the way to compress a video file. Video files are already compressed using lossy codecs like H.264, and if you apply a lossless codec like ZIP you may end up with zero additional compression. In some cases, applying ZIP to a lossy compressed file may cause the file to become larger.
The correct way to compress a video is to export it from iMovie (or whatever) with the correct settings for the destination (email, YouTube, iPad, etc.).

IPhone video to iPad Video App Workflow

What's the easiest way to sync my iPhone videos into my iPads video app? Right now the videos from the phone import into iPhoto. I then have to drag the videos into iTunes, and then sync the iPad. Is there an easier way?
thanks

Depends on the what iPhone you have. There are a few tutorials on YouTube showing how to do this with the iPhone 4 and iPad using the Camera Connection Kit.
You can do this with short videos using the PhotoTransfer app:
http://itunes.apple.com/us/app/photo-transfer-app/id365152940?mt=8

Edu DVD in computer iTunes but does not show up in iPad iTunes or iPad video. How do I make the DVD contents available on the iPad?

Educational DVD added successfully to computer iTunes but does not show up in iPad iTunes or iPad video. How do I make the DVD contents available on the iPad?

Thanks! For whatever bizarre reason for which I have no answer - I sync'd my iPad to my MBP the old fashion way (not iCloud) and the movie showed up just fine. It is Nikon camera 'how to' video. I like to watch them for a better indepth discovery of what the camera can do. The only weird thing about the hard wire sync is that it was placed in a catagory "home movies" which was never there before...actually it showed up in two places "home movies" and TV shows.
So, thanks anyway! Pretty cat!
Mona

New Macbook video import problem.

Hi all,
I have just gone and bought myself a new Macbook Pro and I am very pleased with it. From a video standpoint I plan to use it to import and edit HD video from my Canon HV20. The new Macbook only has a Firewire 800 port and so the cable that I would normally use to connect computer and camcorder will not work as it is 'mini' Firewire to Firewire 400. I am assuming that there is/will be a 'mini' to FW800 cable available, but in the interim I am using a Firewire hub that is connected to the Macbook by a 400-800 cable. And herein lies my problem ! Although iMovie8 detects my HV20, it will not display or play or import any footage from the tape ! It just remains on the blue import screen and although the camcorder is merrily 'playing', no footage is actually making it across to the computer. I think the issue is the Firewire hub part of the connection but I thought it best to garner an opinion from users of this forum. Help !!
Many thanks in advance, kroguk
PS
I will also post this on the Macbook forum, so apologies if you see this post twice

Well, I can't find my Belkin FW800-to-4-pin (9-pin-to-4-pin) cable right now ..I'm doing some "tidying up" ..which is always hopeless for finding things afterwards!.. but I DID buy the other day - in the German Mac specialists, erm, can't remember the name - a Sonnet Fast-something (..which I've just put down, and now can't find..) teeny 9-pin-to-6-pin adapter (..so small that I can't find it!..) and I've just tested that with a Sony HC1 HDV camcorder.
Using the Sonnet adaptor..
..which is mentioned on their website at top-left here: http://www.sonnettech.com/product/adapters/index.html ..on a normal 6-pin-to-4-pin FireWire cable.. I just connected my camcorder and successfully imported HDV from the Sony.
I tested it twice with iMovie HD 6, in the most adverse conditions: 1; connecting to the 9-pin FW800 socket on a G4 17" laptop (..which is generally too slow to import HDV in real-time..) and 2; looped ("daisy-chained") through the 9-pin FW800 sockets (..one socket from the drive to my Mac, the other socket from the drive to the camcorder..) of an external iOmega FireWire drive connected to my Quad G5 Mac, also with iMovie HD 6. Both imports worked perfectly.
I'm also trying it as I write this - I just found the adapter again! - to import into iMovie '08 on the G5, daisy-chained through the external disc (..the G4 is too old or underpowered to run iMovie '08..) and that works as well ..though I did have to "kick" the program into starting a new Event; at first the camera transport ran, but no video imported, so I just Stopped and re-imported.
I bought this adaptor "on spec", as no previous device or adapter had worked properly for me (..converting between 4-pin on a camcorder and 9-pin on a Mac..) and this is the first to have worked, for me. But I have great faith in Sonnet, as they make the extra S-ATA driver card and other bits and bobs which I put in my floorstander G5, and that all "just works".
Ah; the shop where I bought it is ..hold on a moment.. the "m store" in Munich. (Karsten may know them: when Gravis moved from Lindwurmstrasse to Im Tal, the m store opened up right next door to where Gravis had been before) and they're at Lindwurmstrasse 5a, their phone number - they speak English, too - is 0049 89 24 22 35 24 and their website is ..aaaarggh; they don't seem to have one.
Anyway; the Sonnet SimplyFast FireWire 400-to-800 Adapter works perfectly - for me - on the end of a normal 4-pin-to-6-pin FireWire 400 cable, and importing works flawlessly every way I've tried it ..even daisy-chained through an external drive.
I can heartily recommend it.
But - as always - "your mileage may vary" ..meaning that it might not work so smoothly for you.

How do I zoom in and out on my iPad videos

How do I zoom in and out using my ipad video?

Double click the clip in the Timeline, to place it in the viewer.
In the Viewer window click the Motion tab. Adjust the "Scale" control and set keyframes as needed.

In Windows 8.1 Premiere Pro video imported clips shows up black screen in Source & Work space. Everything is updated on my PC.

In Windows 8.1 Premiere Pro video imported clips shows up black screen in Source & Work space. Everything is updated on my PC. They say it could have been a Windows update? Is anyone else having this problem and found a solution any suggestions.. Thank you.

Hello, thank you for your help. I finally was able to contact someone from Adobe on line.. It took about 1 hour on hold but I finally won the lotto...Lol. Pr.. /Project/Project Settings/General/ I had the (Mercury Playback Engine GPU Accelerated (CUDA) and not the (Mercury Playback Engine Software Only) It only took 1 second for Adobe to figure it out...Lol.
Although I have a high rated Nvidia card that did handle the software for some time after a hack, I believe a Windows update may have altered my Premiere Pro CS6 settings.
Video card is Geforce Nvidia GTX 765M non compatible with (Mercury Playback Engine GPU Accelerated (CUDA). Thank Ronin Edits and cvid01

Why does my iPad video shoot in 24 fps when 25 fps PAL is the standard for Europe?

At some point in trying to get my iPad 2 video into a viewable place ie my TV I had an alert telling me the iPad video at 24 fps conflicted with my iMac settings in iMovie (or it may have been iTunes) which was set up for 25 fps PAL. Is there a way to shoot 25 fps PAL on the iPad to avoid degrading quality when converting?

Try the Settings app.
Tap on the left under the video button.
Look for the heading TV Signal.
Change from NTSC to PAL.
Perhaps this should/might work.

I'm having trouble with video imported from my camera memory card.

I'm having trouble with video imported from my camera memory card.The video breaks up and pixelizes when it's directly imported from the memory card. That makes the video useless. Why does this happen? It doesn't do that in any other video editing software. Thanks for the help.

More info please:
Type of camera?
Was the card formatted in the camera doing the shooting?
Type of files the camera is set to record?
Al

Output iPad video to 27" iMac using iPad VGA adaptor?

Hi, I was wondering is it possible to Output iPad video to 27" iMac as an external monitor using iPad VGA adaptor?
Thx.

No. The VGA adaptor is an analog connection and the only inputs are digital Mini Display / Thunderbolt ports depending on your model. It maybe possible with a conversion box of some sort or maybe trying an HDMI to mini display port cable ($44.95) and an iPad 2. The 27' should be able to be used as a second display but the 21 is not. If you have the iPad 2, pick up the cable and the HDMI adapter and try it out. If not, return the cables within two weeks.

IPad Video import query

Similar Messages

Maybe you are looking for