IPad videos have a black scrreen
My iPad videos doesn't show image. Just a black screen. It happen after download iTunes U. How can I solve my problem?
These all things that have been tried and shown to be successful for other users with this issue. Start with these tips.
Quit the video app and restart. Go to the home screen first by tapping the home button. Quit the app by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on the video app icon until it begins to wiggle. Tap the minus (-) sign in the upper left corner of the video app icon to close it. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Try the app again and see if the movie is there and will play.
If that didn't work - Search for the movie. From the home screen swipe to the right and the Spotlight Search feature will appear. Type the name of the movie in the field at the top, if the movie shows up in the search, tap on the icon and hopefully it will begin to play. Let it play for a few minutes then tap Done. Return to the video app and see if it is in there now.
If the Videos app still won't play, try playing a podcast in the Music app if you have one. If not download a free podcast, play it for a short period of time, and then try the videos app again.
Double tap the home button to bring up the task bar, swipe all the way to the right to get to the music control - tap the arrow and see what happens.
Reset the iPad - hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider.
Similar Messages
-
Why does interlaced video have vertical black bars?
Despite looking all over the internet and asking video editors I know, I've never yet found a satisfactory answer to this question:
When I bring DV PAL footage into my Mac, why are there always very thin black vertical bars on each side? And why is the image being squeezed slightly?
I think it may have something to do with interlacing.
If you look at my screenshot here.
You can see that the top image (QuickTime 7 Player) exhibits the issue I'm talking about (the prescene of combing on the man shows this is interlaced).
But the black bars have disappeared in the bottom image (QuickTIme Player X) - and you can see that it looks slightly horizontally stretched by comparison. I'm guessing this is something to do with the fact that QuickTime Player X DE-interlaces video.
The question remains though... what is it about interlacing that introduces black bars and an incorrect aspect ratio??If you are ripping "standard" format content (4x3 ratio) then it will just appear like that on a widescreen TV. You shouldn't have that problem if you're ripping widescreen content (16x9 ratio).
-
my new ipad 2 turnes to black screen with the apple icon in the middle while using it or if i just left it locked for a while, it just hanged and i have to restart it?! so why this is happening ?! is there is a productio error or something i can do to prevent doing this ?!
Appreciate responding as soon as possible.No, it's definitely not normal. Your User's Guide recommends a series of troubleshooting steps to go through when your iPad is misbehaving: As you're already in effect doing the first of the main steps, a Restart of your iPad, and that's not curing it, move on to the next .. a Reset.
To do this, press and hold both the Home and the Sleep/Wake buttons for about 10-12 seconds, until the display blanks and the red Power Off slider appears. Continue holding the buttons until the slider disappears, replaced by the black screen and white Apple logo.
This shows your iPad is starting to reboot. Release the buttons and allow the process to continue until the Lock screen appears again, then slide the slider to complete the process. -
My iPad was upgraded to iOS 8.3 software while plugged in. This morning, the battery is almost dead, and I have a black screen. Not sure the iPad is even charging! Any thoughts on what to do? Thanks.
The update is iOS 8.1.3 not iOS 8.3.
Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost. -
ipad 2 screen is black . when i press the power button it takes a screen shot but i have no functionality . tried holding the home and power button together but the screen just flicker and stay black . no apple icon shows up. help please
Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device -
Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore. Now I have a black screen with the Apple logo and the circle lines. None of the buttons respond. Help, please!!
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Maybe this will let the iPad reboot and then you may need to restore again but see if this helps to start the iPad first.
-
i have just bought an ipad2 from usa. now i am in india. i am a first timer user of ipad. i have charged for three hours, when i start iti.e. on the device it shows a plug in icon with itunes. then the screen turns black. i am not able to use the device. kindly help
You need to plug the iPad into your computer that has iTunes installed on it, and activate it.
The User Guide would be good for you to read:
http://support.apple.com/manuals/#ipad -
My iPad screen has gone black. I have tried resetting it with the sleep and home buttons and it only flashes the apple on the screen for a nano second and then it goes black again. I can even hear notifications arriving, but I cannot see anything...I'd rather not reset it to the factory settings as I have a lot of things I worry about using. Either way seems to me that the system itself is working since I can hear it working, but its the screen that isn't. It has not been dropped and has been in a case for years! Please help!
When the power is on and I press the home button, I can slide my finger where the slider bar "would be" and it makes the noise as if its "opening" flashes a blue screen then returns black...
-
why do I have a black sreen when I try to watch a youtube video. I have sound but no video and if I click on the black screen firefox crashes.
Also update firefox to version 23, you are currently on Firefox 3.6.
* [[Update Firefox to the latest version]] -
I just updated my Ipad to I0S 7.02 like it asked me too. Now i have a black screen Itunes logo and a picture of the plug in cord. I can't get to my home screen. What happened?
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
hi there , I have Ipad 2. just upgraded to OS 5.1 and now cant transfer any videos to it. videos already stored can be played but when i try to copy any new video, it says that the video cannot be played by Ipad.I have tried mp4, mov, m4v but nothing plays.
Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode. -
How do I add text with not background or box? i need the two lines of text to appear throughout my video as a disclaimer.
patsy
What version Premiere Elements and on what computer operating system is it running?
Generalizing...based on versions 11, 12, or 13...
Expert workspace.....
Place the Timeline Indicator on the Timeline where you want the text to start.
Text Menu/New Text/Default Text to open the Titler where you create you text. Close the Titler.
The Timeline text file goes on the track directly above the video.
You can drag on the edges of the text file to alter its duration - to extend across the whole Timeline content if wanted.
If th text overlays the video at a place on the video that is black, you can change the color of text in Color in the Text section of the opened Titler. Remember that the black that you see in the opened Titler before you type is transparency not the color black.
https://helpx.adobe.com/premiere-elements/using/creating-trimming-titles.html
Please review and consider, and then let me know if I have targeted your question. If not, please give more details.
Thank you.
ATR -
i have a late 2011 macbook pro and i don't have the airplay icon on my menu. Everything is on the same network and i have a black mini apple Tv. it is either 2nd or 3rd generation. The airplay icon comes up in itunes it doesn't works with video just music. I want to mirror it on my apple tv. Will you please help me?
That's why, you will need to upgrade to 10.8
-
Why does my exported video have black edges?
Hi Everyone,
Somehow my video must be changing frame sizes or something to that extent. I have thin black edges on my exported video. I have checked carefully and my output and source settings match to my visual knowledge. Please help.
Mike DiazMark,
I can show you the player in Premier but I wouldn't know how to export the encoded clip back into Premiere LOL. I'm a total newbie at CS6. And I don't know how to upload a clip, I don't even know how to screen shot it through my notebook. I tried print screen and I get nothing so I am going through my mobile device to upload everything. Thank you guys for your patience and help. -
I have a black border around my video and I would like it to be full screeen
I am running Premier Elements 10 on a PC and I am getting a black boarder around the video and I have rendered it multiple ways. Is there a way to get it gone? This is the link for youtube. HCC 2014 video Final - YouTube
Thank you
BruceAnswers in CAPS. But from playing with the file, it does not appear that I can get rid of the black border. I would have to start again from scratch. I tried a FV4 file format and a AVCHD.mp4 format and they both have black borders. Any other suggestions on how to get rid of the border, or is it impossible at this point.
Thanks Bruce KeenanPresident, Himalayan Children's Charitieswww.hccnepal.org
From: A.T. Romano <[email protected]>
To: Bruce Keenan <[email protected]>
Sent: Thursday, November 6, 2014 6:14 PM
Subject: I have a black border around my video and I would like it to be full screeen
I have a black border around my video and I would like it to be full screeen
created by A.T. Romano in Premiere Elements - View the full discussionBruceKeenan Thank you for the reply with a lot of important details. With a 99.9999% certainty, I believe you issue is thata. you used 4:3 project settings for 16:9 source mediab. when you imported that 16:9 source media you used it as is without scalingit to get rid of the black border at the top and bottom of the frame caused by the 16:9 source ina 4:3 project. Apparently when you opened the new project, you accepted the default which is NTSC DV Standard 4:3 insteadof changing that to the project preset that would best match the properties of your source 16:9. For you to check out... a. Open a new project and, in the new project dialog, click on change settings, followed bychanging the project preset toNTSCDSLR1080pDSLR [email protected]
I OPENED A NEW PROJECT AND THE STANDARD SET WAS NTSC-DV-STANDARD-48kHz WHICH IS MY PROBLEM AS YOU POINTED OUT.
b. If you really want a F4V file HD, thenShareComputerAdobe Flash Videowith Presets = F4V - HD1080p (Flash 9 and Higher) If you want a MPEG2 file (SD), thenShareComputerMPEGSwith Presets = NTSC DVD Widescreen If you want a MPEG2 file (HD), thenShareComputerMPEG2with Presets = HDTV 1080p 29.97 High Quality If you want to explore with an AVCHD.mp4 file (HD), thenShareComputerAVCHDwith Presets = MP4 - H.264 1920 x 1080p30 Lots to explore. And, there should be no black borders anywhere. If any questions or needclarification, please do not hesitate to ask. Thank you. ATR Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6906984#6906984 Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
Maybe you are looking for
-
I purchased my macbook pro on the 18th of june 2011, do i still need to purchase the lion or is there a way of getting it from mac complimentry ?
-
Reading Header data in a SOAP Envelope for SOAP Sender Adapter
Hello All, Am using a SOAP sender adapter and want to use the data inside the SOAP Header for some routing purpose(extended receiver determination). Any SOAP message coming into XI will look something like below. But XI will pass the contents of <SOA
-
What can I do after my iPhone 3 Gs says Your phone could not be activated?
-
How can I discover lightweight 1131AG Access Point using 2106 WLAN Controller.
-
Please Make A Validated Woman Out Of Me!
Hi, I am having a problem validating a html page that usses an embed tag, any easy fix for this? I would like to keep the page html. Or if anyone may know of a slideshow that I can use that does not require the embed tag, or how to insert this one wi