IPad Viewing Direction

My iPad recently has been automatically rotating upside down in the direction of my viewing direction.  How do I set the iPad to automatically rotate in the direction of my viewing direction.  Thank you for your assistance.

Close all the apps and restart the iPad ,this should help the problem.
This problem would have occured due to improper ram clearance ,it will be fine after the restart.
iHappy to help

Similar Messages

  • Customized strings in iPad viewer not working?

    Hello,
    per request of client i've tried to change one string in viewer for iPad. So i've created template in DSP App Builder, modified this template on my computer, choose this file in App Builder and prepared another build (V28). Unfortunately, i still see old original string (i've double tested that i'm downloading new version of app). When i now check DPS App Builder, it just says "Asset stored on server", so i asume, that everything goes smoothly on this side.
    Any similar experience with customized strings?
    Thanks
    Martin

    Everything was done from scratch with V28.
    1. 10. 2013 v 16:14, Bob Bringhurst <[email protected]>:
    Re: Customized strings in iPad viewer not working?
    created by Bob Bringhurst in Digital Publishing Suite - View the full discussion
    That's odd. It worked for me when I tested it. Perhaps you should try moving the current xml file to a different folder, downloading a new version, copying and pasting, and rebuilding.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5728130#5728130
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5728130#5728130
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5728130#5728130. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Digital Publishing Suite at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • HT4623 hi i have ipad 2 and i want to connect my external hard disk to transfer data from ipad to directly to external drive?

    hi i have ipad 2 and i want to connect my external hard disk to transfer data from ipad to directly to external drive?

    Only if you have an app and a wifi hard drive like this
    http://www.seagate.com/external-hard-drives/portable-hard-drives/wireless/wirele ss-plus/?cmpid=ppc-_-satellite-_-g-_-us-_-wifi_hard_drive-_-e

  • Why we cannot perform DML operations against complex views directly.

    hi
    can any tell me why we cannot perform DML operations against complex views directly.

    Hi,
    It is not easy to perform DML operations on complex views which involve more than one table as said by vissu. The reason being you may not know which columns to be updated/inserted/deleted on the base tables of the views. If it is a simple view containing a single table it is as simple as performing actions on the table.
    For further details visit this
    http://www.orafaq.com/wiki/View
    cheers
    VT

  • Calling a BSP application's View directly

    Hello,
    I am using BAB to simplify 'Maintain Opportunity' BSP. After the simplification, when calling the BSP in portal, I could not call the view 'ACT_LEAN' directly. I can see only the standard BSP in the portal and not the changed one. Following are the parameters I am passing to the portal:
    BSP application: CRM_BSP_FRAME
    Start Page: entrypoint.do
    application parameters: appl=CRMD_BUS2000111&blview=ACT_LEAN&sap-syscmd=nocookie
    I have also activated the whole tree where all these bsps are in the xn 'sicf'
    Any advice on how to call the view directly is appreciated.
    Regards
    - Arun

    Hi ,
    what you need to do is
    1) for the "Send" button attach a java script.
    <htmlb:button id="myButton" text="Submit ...." onClick="sendRequestWrapper()"/>
    this javascript should take the inputfrom the field,
    then in the javascript create the URL.
    function sendReqeustWrapper(){
    sendRequest(InputField);
    function sendRequest(InputField)
    var URL;
    URL  = window.location.protocol + "//" ;
    URL += window.location.host ;
    <b>Note: its only Example link,</b>
    URL += "/sap/bc/bsp/sap/<BSPApplication>/controller.do";
    URL +="?InputFieldName=";
    URL +=InputFieldValue;
    <b>then use</b>
    Your URL will look like:
    http://ld0507.wdf.sap.corp:50007/sap/bc/bsp/sap/<bsp appl>/controller.do?InputFieldName=XXXXX
    window.open(URL,"_self","");
    so once this URL is triggered  you need to goto the respective controller and handle the input. You can see the reply from Mr. Akshaya Rao .
    regards,
    Vijaya Kumar M.
    Message was edited by: Vijaya Kumar

  • Can you read books on the ipad in direct sunlight

    can you read books on the ipad in direct sunlight ?

    Not very easily no. If you can get a non-reflective screen cover it might be a bit better, but it probably still won't be as good as, for example, a Kindle device is.

  • Unable to view direct editing

    Hi Team
    Unable to view direct editing in the Um managent
    please guide me through the steps to activate it
    Thanks
    Madhu

    Hi Madhu,
    In EP 7.0 the Direct Editing has been removed and the same can find in config tool.
    Login into Config Tool, Select Server ---  services --- com.sap.security.core.ume.service and then edit the properties accordingly which requires portal restart to reflect it.
    Check it once and do let me know if you have any clarifications
    Cheers
    Venkat

  • HT4061 ipad2 is frozen when downloading upgrade ios7.  screen shows ipad cord directing to itunes icon.

    ipad2 is frozen when downloading upgrade ios7.  screen shows ipad cord directing to itunes icon.

    That implies that your iPad has gone into recovery mode : http://support.apple.com/kb/ht1808
    You will need to connect it to your computer's iTunes (you will need an up-to-date version of iTunes on your computer), and you should then be able to reset your iPad and restore/resync your content to it

  • Can I put songs from my iPad Mini directly onto my iPod Shuffle, or do I have to do it through a computer?

    Can I download songs from my iPad Mini directly onto my iPod Shuffle, or do I have to do it through a computer?

    Computer.

  • Lightroom and an iPad viewer app

    Hello,
    I was looking at the iPad as a photography aid tool, for tethered shooting. Basically, I usually shoot tethered with a notebook. But there are situations, where it's just not doable to have the clients at the notebook. I'd rather use a WiFi Tether on my Canon camera ( wireless transmitter ) to the notebook... and use the notebook as a server for image viewing and rating by clients, who could be sitting further away from shooting location. Or, as it sometimes happens in interior design shoots, leave the notebook sitting in a room, while moving around with the camera. And the iPad would come with me, much easier and simpler to carry around than even a light notebook.
    Or even capable of solo tethering via WiFi a camera in JPEG+RAW mode ( I'm pretty sure viewing RAW files on the iPad would be asking for a bit too much ) for viewing, rating, and reviewing at 100% for focus, lighting and so on. Again, much more portable for location work than any notebook I can think of.
    I noticed Phase One released such an App, [url=http://www.phaseone.com/capturepilot]Capture Pilot[/url], to be used alongside Capture One.
    Is there word of any such app by Adobe to be used teamed up with Lightroom or solo ? :|

    Okay then, I was mistaken. I thought you asked the users in this user forum for a solution to a problem. But you wanted to talk directly with Adobe about a request that you have. I did not mean to bother you, I apologize. Maybe there's a forum for requests...

  • Is there a way to connect my ipad 2 directly to the apple TV?

    Is there any kind of cable that will connect my iPad2 directly to the apple TV and stream what is going on on my ipad onto the TV screen? Or its done wirelessly only? 
    Thank you in advance!

    http://store.apple.com/us/product/MD098ZM/A/apple-digital-av-adapter
    this one? if i connect it to the tv, will it work  if audio system is connected to the tv?

  • Do I have to plug my ipad mini directly into the mains for a reliable charge?

    I've been having an issue with my new ipad mini not charging even when its plugged in using the mains adapter unless I plug it directly into the wall. This is a bit inconvienient as I don't have enough sockets and I like to use my ipad as a clock radio with TuneIn so when I wake up my battery is about 40% even though its been plugged in overnight.

    This is unclear and confusing...
    Lorraine Broadhurst wrote:
    I've been having an issue with my new ipad mini not charging even when its plugged in using the mains adapter unless I plug it directly into the wall. ...
    iPad Charging
    "The fastest way to charge your iPad is with the included USB Power Adapter.
    iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter.
    When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode.
    Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain."

  • Viewing Direct Deposits made to vendors

    Currently we can view when checks have been issued to a vendor. We can see what the check number is, when it was issued and when it was cleared. We can not find a transaction to show when a Direct Deposit was made to a Vendor.
    I am talking about the end user being able to research without having to call the A/P Department. Is there a tranaction code for this?
    Currently we use ME23N and drill down through to see the check information when a vendor states they haven't received payment.
    Thanks
    Tim

    1. First find out whether the REGUH table for the PRE DME run has correct enteries . Note the sequence number and assignment number for one employee from REGUH
    2. Check the BT table in RT for the above Pernr , Seqnr, assignment number.
    3. If its Off cycle, find out whether the other payment method (check) was selected in the PUOC_10 screen.
    4. If not, go to se16 and check the all the records in PA0009 for one employee.
    5.  If you still unable to figure out, then simulate the same payroll again and expand the log and find out the P0009 function.
    6. Check the net processing logic.

  • Rented movies, HD or standard definition for iPad viewing?

    Does the difference matter when viewed on the iPad?
    Thanks,
    Ken

    Yes, there is a difference. But your question was does that difference matter. In my opinion, the difference on a small screen is not enough to justify the additional expense and download time. I suspect that this may be a matter of personal preference. You might want to try an HD movie and see if it wows you enough to be worth it.
    Best of luck.

  • I set up on my new iPad as directed but no verification email will come through. The email address is correct.

    I set up iCloud as directed on my new iPad but a verification email was noy sent even after clicking send again. What do I do now?

    You may change this under settings, mail-contacts and-calander. Are you try to use stock iOS mail app? if this doesn't work, you can use Gmail app from the App store to make it easy.

Maybe you are looking for

  • Report for vendor Purchase order

    Hi my Client requirement is when they enter PO.no,or by any means, they must get the report of Open Quantity, posted GR quantity, finally invoiced quantity of PO. Do we have any Std, in SAP ??? regards imran

  • Best format for video, etc.

    I have downloaded videos from my camcorder and have them on the hard drive for editing. I want to make a DVD with them but I also want to have an electronic version of the movie as well to keep on my hard drive, but in a format that is 1) popular (no

  • Exchange server not aviable on OSX but works fine on IOS

    Using coorperate Exchange server i suddenly cannot acces my exchange mail leaving the HQ (outside the firewall) on my Macbook air. This has worked fine earlier but apperently our company upgraded the firewall or changed the port settings. My mail and

  • Why there are no books for sale in iBooks?

    Hej, I just want to ask everyone why there are no books for sale in iBooks in Sweden. I mean this is really disappointing because I want to buy and read new books and there are no books for sale. If anyone has an answer to my query please reply. Than

  • Client-Server Application

    Hi everybody! I'd like to confirm if it's possible to replace the programs developed in Visual Basic.NET by Java? Including local file access, Databases, ODBC, GUI etc. In other words, to develop traditional MS Client-Server application to run standa