IPad Vs WiFi

If my IPad is in locked mode is the WiFi still connected?

5GHz is much more susceptible to issues with walls and other kinds of blockages.
The general trade-off is less interference on 5GHz from other wireless devices (cordless phones, microwaves etc), but shorter range.
I'd suggest experimenting by setting the Airport to use 2.4GHz only (or 5GHz only) and see what effects there are

Similar Messages

  • Help needed asap! Will my IPAD 3G wifi work in another country with the sim of a 3G services provider?

    Help needed asap! I want to buy an IPAD 3G + Wifi before I return to my country from the US. The problem is that I have GSM service providers in my country that provide 3G services but I am wondering if their SIM card would work in the IPAD? In other words, can I get an unlocked IPAD 3G wifi? Thanks for helping out

    The AT&T 3G iPads (which are GSM/sim based) in the US are not locked (the Verizon models are CDMA based so they effectively are). So as long as you can get a sim in your own country you shouldn't have a problem

  • My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc

    My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc. Help

    You should probably start here and go through all of the troubleshooting steps and then report back if you are still having problems.
    http://support.apple.com/kb/TS1538

  • I am planning to buy an iPad 2 WiFi   3 G from USA , will it work in Egypt?

    HI ,
    I am planning to buy a new iPad 2 WiFi + 3 G from USA ,,,, and i will use it in Egypt.. will it be unlocked for AT&T in Egypt ?
    thanks  ,

    Make sure you buy the WiFi+3G AT&T (3G) model.
    You won't be able to order it online unless you have a US credit card tied to a US address and a US shipping address, so I am assuming you are coming here to purchase it. If so, call ahead before you go buy it to make sure they have one in stock.

  • TS3694 hi i recently updated into ios 7.0.4 now i want to fully restore my ipad to resell but when i restore it it got stuck with apple logo and progress bar with 45% completed as firware file is downloaded using ipad 4 wifi itunes 11.3.8

    hi i rescently updated my ipad 4 in ios 7.0.4 and for resell purpose i want to restore my ipad via itunes but it got stuck at apple logo and progress bar of 45% completed i tried it 50 times but it stuck on that exact point for hours i cant able to restore it and had no errors it just like freezes at one point i also uses dfu mode but got stuck at same problem using windows 7 32 bits itunes 11.3.8 ipad 4 wifi please help

    My iPhone 5 wouldn't start after I turned it off a few minutes after writing this. It went into recovery mode and I had no choice but to connect to iTunes on PC and restore.
    I restored to factory setting first, just to validate my phone was okay. For a second consecutive iOS update, the  iPhone 5 did not update smoothly while connected to PC and iTunes - I had to retry two times before the progress bar for the update showed. (The exact same problem with the restart occured when I updated to 7.0.4.)
    The good news is that I was ultimately able to restore the iPhone 5 to factory settings while running iOS 7.0.6. I did have a backup from about a month ago lying around and was able to successfully restore with that as well, so the damage done is almost negligible since I had my contacts, notes, mail, etc. backed up to iCloud.
    Once I completed both restores, the sync with iTunes worked fine.

  • I have a new iPad with wifi. When I send messages I can see my sons and my husbands but not my phone number.  We all have an iPad and all use the same apple ID as iPad the bill.  How can I remove their numbers and add mine?

    I have a new iPad with wifi. When I send messages I can see my sons and my husbands but not my phone number.  We all have an iPad and all use the same apple ID as iPad the bill.  How can I remove their numbers and add mine?

    Add another e-mail account to your messages, so people could reach you on that e-mail from messages. As soon as you are online (if you have wifi only iPad) you are able to send and receive messages. i.e. your son can send you a messages from his iPhone addressing it to your (that additional) e-mail address.

  • I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is Bluetooth OK to use GPS positioning on the IPad?

    Hi
    I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is the Bluetooth connection working to use GPS positioning on the IPad using IPhone 5 as the hotspot?
    Thanks for your input
    Felix013

    try a RESET ALL SETTINGS

  • How do I get rid of the iCloud Backup alert message?  I cannot do anything with my iPad and cannot get rid of the alert. I have plugged in the iPad with Wifi on, but it won't reset.  Thanks

    How do I get rid of the iCloud Backup alert message?  I cannot do anything with my iPad and cannot get rid of the alert. I have plugged in the iPad with Wifi on, but it won't reset.  Thanks

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • How do I transfer all my data from an iPad Air wifi 32 GB to a brand new iPad Air 2 64GB?

    I received right now a brand new iPad Air2 wifi 64 GB. How do I transfer ALL MY DATA from another iPad Air wifi 32 GB ?

    Back up your old one. I use and prefer iTunes, but back up all the data, etc.
    Then unplug it. Plug your new one in and go through the setup steps. When you see the option to set up as new or restore from the backup you just made, choose that and your new iPad will be a near clone of the old one.
    http://support.apple.com/en-us/HT2109
    has step to step instructions.
    If you are going to get rid of your old iPad, read this before you do so, just to make sure you're not inadvertantly selling someone a brick
    Selling an iPad
    http://support.apple.com/kb/HT5661

  • IPad 2 Wifi iOS 5.1.1 Stuck on Apple Logo

    Hello Everybody,
    My iPad 2 Wifi with iOS 5.1.1 is stuck on the Apple logo.  I didn't do anthing to it and this
    is the first problem I've had since I bought it during the iPad 2 launch.  I've tried a few things
    and they didn't work.
    I wonder if Apple is trying to force me to upgrade.

    In my opinion, iOS 6 is an immense down grade.
    However, iOS 7 is being released tomorrow and it
    looks fairly promising.
    I still desire iOS 5 on my iPad 2 and I'm hoping a
    solution with emerge out of somewhere.

  • Is there any way to watch a downloaded TV show from iTunes on my iPad without wifi?  I have an iPhone if that helps.

    Is there any way to watch a downloaded TV show from iTunes on my iPad without wifi?  I have an iPhone if this helps.

    If the TV Show is downloaded on your iPad, you don't need Wi-Fi to watch it.

  • He "seller" resets the iPad for me to use, do I have to get it re-activated or purchase a contract/service plan if I ONLY ever plan to use the iPad for Wifi Only???

    Question to all the pros..I'm looking to purchase an iPad 4g second hand. Once the "seller" resets the iPad for me to use, do I have to get it re-activated or purchase a contract/service plan if I ONLY ever plan to use the iPad for Wifi Only???

    No you don't need a service plan to use wifi. Take special precautions to make sure the seller is the owner. Be sure all their information has been removed properly. If it were me I wouldn't give the person the money until the iPad is registered in my name. I've read too many horror stories of people buying iPads they'll never be able to use because someone else's ID was still on it.

  • HT1222 IPad mini wifi+cellular does not allows to enable restrictions in fact there is no such alternative under Settings- General.. I need the passcode for several purpose, how can to avail it?.. Please somebody ASAP

    Hello,
    A day before got new IPAD mini (Wifi-Cellular). When trying to look forpasscode enable option, it ended with nothing to avail. Would like to know if there is any such priviledge or not. Secondly, when the iPad is left idle for awhile ,say, 5 minutes,, a poor screensaver pops up and continues to play IPad advertisement, which we usually find in DEMO products @stores. Doubtful, if seller has handed over bad/demo stuff to me. Please suggest. It took whole of last night to figure out on Google, but no success.
    Thanks

    Morning driving,
    Thanks for using Apple Support Communities.
    You can configure a passcode for your iPhone, iPad, or iPod touch using Settings > General > Passcode Lock.
    iOS: Understanding passcodes
    http://support.apple.com/kb/ht4113
    If you are unable to modify certain passcode settings, there may be a configuration profile that requires these passcode options.
    You can find out if a profile is installed by tapping Settings > General and looking for the Profile setting between Accessibility and Reset.
    Best of luck,
    Mario

  • IPad 2 WiFi Range Issues (but not issues with connectivity when in range)

    Okay. I hate to start a new thread when there are bunches of threads on the iPad 2 having WiFi problems (particularly with 5Ghz networks and also related to 4.3). Nonetheless, I'm not seeing anyone talking about range in these forums.
    Issue: iPad 2 WiFi range is not as far as iPad 1 (with no cover on either).
    Alternative Explanation: iPad 2 has difficulty connecting to Airport Express or Time Capsule extended networks.
    Devices: iPad 2 3g, iPad 1 3g (iOS 4.3), iPhone 3gs (iOS 4.3), iPhone (iOS 3.2x), iMac, MacBook Pros, etc.
    Network Router: Simultaneous Dual-Band Airport Extreme (latest version) set up with 2.4, 5 ghz and Guest Networks (each with their own name).
    Network Extender: Airport Express (latest version) extending the 2.4 ghz network
    Network Extender 2: Time Capsule (original, single band) extending the 2.4 ghz network
    Longer Description: iPad 2 connected without an issue to the 5 ghz network and the 2.4 ghz network when it was in the same room as the Aiport Extreme. Didn't have any issues maintaining that connection.
    However, the iPad 2 doesn't work in any of the farther rooms and can't see the network. iPad 1 and iPhones have no issues (and typically show 1 or two bars). I believe they typically are connecting through the Airport Express (but it could be the Time Capsule).
    Given that the iPad 2 isn't even seeing the networks, I'm guessing it's a range issue, but hoping it's not.
    Anyone else seeing this? Any fixes?

    While it is possible that an Apple moderator (Apple host) could pass some information to an Apple development/support group, in practice this doesn't really seem to happen (at least often). I believe that the moderators are kept quite busy just administering the forums and keeping them under control (no spam, ads, abuse, etc.). I've never seen a post by an Apple host here or seen a technical correction to a post (and there is certainly a lot of incorrect information posted here).
    Unfortunately, a lot of new posters here seem to think that they are talking directly to Apple and post bug reports, feature suggestions, complaints, etc. These would be much better submitted via the Apple feedback vehicle at http://www.apple.com/feedback. These are not anonymous, are directed to the appropriate product and provide an email contact for Apple to get back to the submittor if more detail is required.

  • I have a seal pack ipad mini 1 wifi and i want to upgrade to ipad mini 2 retinal display wifi is this possible , that apple take my ipad 1 wifi back and give to me new ipad retinal display wifi ,

    i have a seal pack ipad mini 1 wifi and i want to upgrade to ipad mini 2 retinal display wifi is this possible , that apple take my ipad 1 wifi back and give to me new ipad retinal display wifi , i live in india, bhopal city

    Your only option is to sell the iPad and then buy the new one.
     Cheers, Tom

  • Hello, I have an iPad Mini WiFi Cellular white 16Gb and I puted my sim inside it but, I cant read the text message that I recieve in the Sim. What can i do? And I can't put the sim in a cellphone coz it doesn't recognize it. Please help me! Thank you.

    Hello, I have an iPad Mini WiFi Cellular white 16Gb and I puted my sim inside it but, I cant read the text message that I recieve in the Sim. What can i do? And I can't put the sim in a cellphone coz it doesn't recognize it. Please help me! Thank you.

    iPads do not do SMS.

Maybe you are looking for

  • MS-6337-LE5 (815EPT) and Windows XP Pro (or XP MCE)

    From reading this forum, I have learned that my mainboard can accommodate a clean full install of Windows XP Pro. An upgrade from Windows Me to XP is not recommended. It must be a clean full install. The drive that holds my operating system & applica

  • Automatic Creation PO from Sales Order

    Hi All, I'd like to make automatic PO Creation check box (Sales Order - logistics tab) is checked by default (not blank).  Do you have any idea how to do this? Currently I use SAP B1 2005B version. Thanks and Regards

  • Dvd-hardware enable problem

    Hi there,  well i just bought my MSI G4MX (64MX440-T) i installed it in my system everything just went perfectly but i was just trying to use it to get a better DVD watching time with its DVD - hardware support i used the program Power-DVD Xp version

  • HANA, Aggregations and calculating percentages

    I have a table containing user-role assignments, e.g. the table contains tuples of the form (userA, roleA), (userA, roleB). Now, I would like to get an overview on how the distribution of users across roles. I would like to get the following overview

  • Error while modifying icon and name in the subpalette

    Hi.... I have made three subVIs and want to distribute as LabVIEW library. I made a llb file and added all three sbVIs in that. And put it in user.lib. In all three dll there are Call Library Function means I have one dll. I have put this DLL in the