IPAD WAS JUST WORKING FINE THEN WHEN I WENT TO USE IT AGAIN A FEW MINS LATER ITS BLANK NOTHING COMES UP AND IT HAD A GOOD CHARGE IN IT
ipad was working fine then when i went to use it again a few mins later it wont do nothing screen is just black an ipad is charged any info on wha problem could be iv only ad the ipad 3 months from new
Yep re set my iPad an is working fine now cheers
Similar Messages
-
iPad2 is dead...worked fine, then when I tried to use it an hour later, the screen was black. Home button did nothing; on/off button did nothing. Tried charging overnight...still does nothing at all. Also tried syncing with my desktop; still nothing. Got it in March and have never had an issue before this. Thanks.
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
I just replaced my iPod 5th gen. a week ago, and it was working fine, but when I went to go turn the screen on, it wouldn't turn on. I've tried to put it on the charger and it wouldn't charge and it wont connect to my computer, how do i fix this? I tried to reset the iPod, by pressing the home and power button but nothing works. It's literally a brand new iPod, I dont know what to do now. Help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have an iphone 2g unlocked for tmobile. For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day. It can't find tmobile on my phone for some reason but for 2 years previous it could no problem? tmobile says it is a problem with my phone and not their service.
Any ideas what to do?I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414). You will be given the option to restore to that backup at the end of the restore process. Your messages are stored in the backup so restoring to the backup will return the messages to your phone. Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process. -
Help! I just restored my ipod touch 2nd gen cos I needed a clear out. I went to sync some music back on, and it seemed to work. However when I went into 'music' it said 'no content'. I tried syncing music 3 times and it did the same every time. Help!
Try plugging your ipod into your computer. Then start up itunes. Let it load everything. Then click on your ipod and play a song from your ipod's library. Not your itunes library. If it plays the song, then go ahead and stop it, disconnect your ipod, and check the content once again.
I had the same problem and beleive it or not, this worked. I synced my ipod like 5 times before finding this answer on the web. Let me know if I need to clerify anything. -
my iphone 4 has been working fine but when i try to use music, it wont work. For example i try to put a specific kind of song and it will either not play or skip to another.
read http://support.apple.com/kb/TS3217
-
how come when i make a web site and i test it in my local server it works fine when i tranfer to server certain things do not work example i used javascript to put in a prompt bar for a newsletter page at the server it did not work but at local it did also it works at MOZZILLA but not internet explorer i also have cs4 was wondering if there is a way to test a page in dreamweaver and then transfer THANK YOU X-FACTOR-MEDIA
In future, please try to make the subject line of your posts shorter. In this case the following would have been sufficient: "JavaScript works locally, but not on remote server".
Short, but meaningful subject lines make it easier for others to identify what your question is about, and often bring faster help. -
Does the hdmi adaptor which works with ipad 2 work through the 30 pin adaptor to lightening? I keep getting that it doesn't recognize the device
It works fine on my ipad2It will not work with the 30-pin to Lightning adapter. See footnote 3 in:
<http://support.apple.com/kb/HT4108>
You need the Lightning Digital AV Adapter for the iPad Mini.
<http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter> -
Sometimes my Ipod Touch4 will ave some glitches and go back to normal. Yesterday i was using my ipod as usual and after an hour i was going to use it again but it had a blank/white screan. What can i do to get it back to normal?
That symptom is covered here:
iPod touch: Hardware troubleshooting -
Please, I need help..
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
This IS the 64 bit version of iTunes! It won't recognize my phone! I've reinstalled iTunes, restarted both the computer and the phone, and still can't fix it!
What computer do you have? is it 32 or 64 bit operating system?
-
I restore it, but when it's restored the same message comes up. Also, since I've done this, my Ipod restarts itself everytime I disconnect. HELP!!!
by reset option do you mean the DFU restore? worked for me, have you tried that?
if not - hold the lock and home button until the power down bar comes up. then hold the lock button for ten seconds - next continue to hold the lock button and press the home button for ten seconds - next release the lock button and hold the home button for 10 seconds. this should be done with the phone tethered. If done right and your itunes is configured as such, the phone will reload the drivers and start up itunes, and then prompt for a restore/update. -
Referring to support tips, I have already tried several options, such as "pressing ctrl/opt keys simultaneously with the switch key, etc. and have found no improvement.
your mac is under warranty. schedule an appointment at your local apple store or AASP.
-
I am no longer able to get video playback on my pad. Was working fine, then nothing. What do I do?
I am no longer able to get video play on my pad. It was working fine, then when I went to use it again later, nothing. Any suggestions as to what to do?
Quit the Videos app completely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't work - try this. Swipe to the right from your first home screen to get to the iPad Spotlight search. Type in the name of any of your movies in the field at the top. When the movie appears in the search - tap on it and it should start to play. Let it play for a minute or so - hit done - go back to videos app and see if all is OK. -
I pad was working fine then when tring to access safari or facebook recieved a message Safari cannot open page because your I pad is not connected to the internet. How do I correct?
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
Maybe you are looking for
-
URL redirection config in PI SOAP receiver communication channel
Hi, I am working on a similar scenario where I my consuming an external web service using https protocol from PI. I have configured a soap receiver channel to call the target url of this web service as https://portal.xyz.org.uk/webservice_alt. I am g
-
How can I edit a table during a presentation?
I'd like to use Keynote for a "game show" style activity at my school. I created a presentation in Keynote that contains one slide with a large table. During the presentation I would like to edit the contents of some of the table cells without goin
-
When do u go for elementary test and combined test(rsrv)
hi all, Can anyone explain me with an realtime scenario ? when do we go for elementary test in rsrv trns code and combined test. thanxs hari
-
Media Importing with Ver 9 Pro Extended
I just made a PDF with an imported mov. file in Acrobat Pro Extended, can someone tell me if the trail version (this is what I have currently installed) lets you view the imported movie on an other machines. I've tried it on my Mac Leopard and Tiger
-
How to group emails into a daily digest?
I got subscribed today to dozen of topics and receive a lot of emails now. Is any way to receive daily/weekly digests instead? Checked Preferences under Profile - it's not available there. If it's not possible - I will have to unsubscribe.