IPad Wifi Connection no longer connecting--other devices OK

  I have an issue with my iPad 1 where I previously was able to connect to my Linksys home wireless network but can no longer.   
My MacBook and friends are able to connect regularly with no problems.  I have reset my iPad but continue to get "Unable to join the network" upon entering my password.  iPad is able to connect to other WiFi networks.
  Additionally, the "forget this network" option is nowhere to be found for my home network in Settings.
Any ideas?
Many thanks!!!
--nicholskc

Try this, turn your Wi-Fi off on your iPad, wait a few seconds then turn it back on, If that don't work you can click the renew lease button on the bottom of your Wi-Fi network window.  And as a last resort you can reset your network settings by clicking on settings>general>reset, 

Similar Messages

  • TS1398 I have an ipad and just recently am not able to connect to home wireless wifi, the hourglass just spins when clicking the network to connect, other devices work fine

    I have an ipad 2 and just recently am not able to connect to home wireless wifi, the hour glass just spins when clicking the network to connect, other devices work fine and can connect.  Was able to connect at school, but not here at home all of a sudden, help?

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT204400 no matter what i try,  my apple tv says it cant connect to the network and it gives me error -3906.  i have tried restart and reset, wifi, ethernet same error. all other devices work fine.

    My apple TV has been working fine. Now it gives me error -3906 and says it cant connect to the network. it wont accept the password for my wifi.  I have tried to restart and restore both the apple tv and my modem.  still the same issue and same error message.  any ideas?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • How do you in xcode search devices in bluetooth and stablish connection other devices with iphone or ipad

    hi everyone
    how do you in xcode search devices in bluetooth and stablish connection other devices whit iphone or ipad ?
    the all answer is good
    and the source is enable for all

    Bluetooth on iOS has three different functions:
    o user level features -- For example, headsets.  There is no developer opportunity here (well, you can play audio that comes out the headset, but you know what I mean :-).
    o networking -- You can establish a PAN network to other iPhone OS devices with GameKit (going away)  or Bonjour.
    o accessories -- All Bluetooth accessory developers must go through the Made for iPod program.  Once you have an MFI device you can then talk to it through ExternalAccessory framework.
    <http://developer.apple.com/ipod/>

  • I have an Iphone 4 and it keeps kicking in the 3G instead of using my wifi. My wifi works well with all other devices and the password is fine. I connect and it show the connection then goes back to 3G.   Thank you

    I have an Iphone 4 and it keeps kicking in the 3G instead of using my wifi. My wifi works well with all other devices and the password is fine. I connect and it show the connection then goes back to 3G.   Thank you

    This crap just happened to me this morning where I was sent 90% data plan threshold warningfrom AT&T (while sleeping at 7:09am) then 5 minutes later getting the Overage data plan warning from AT&T.  This is all while I'm asleep right next to my phone plugged into a (non-Apple) dock on my clock radio.
    Android has a limiting feature, why can't the "smart" guys at Apple learn from this??

  • IPad WiFi Connection Problems - WiFi Symbol Appears With Full Bars but I Don't Get A Checkmark?

    I was using the iPad one day and then all of a sudden it stopped connecting to the internet. The network at this hotel is very good and I've asked them about their router so it is not the router's problem.
    I go to the Settings and tap on Wi-Fi then I tap on the hotel network. After a few seconds, it says the network name beside the Wi-Fi tab and it gives me the WiFi symbol showing 3 bars. But then I never get the checkmark or tick saying everything is connected. I try going online and it says the iPad is not connected to the internet. I've tried an iPhone and it connected and got a checkmark in a few seconds. I've talked to the front desk and he took out his phone and showed me that he could connect, he even opened a page without any problems at all.
    I've been trying to find a solution for this for a long time. I've been searching Google over and over again. I turned Airplane Mode on for 1 minute, I've tried Resetting my Network settings, I've tried forgetting the network and reconnecting again, I've tried removing all restrictions from the iPad, I've rebooted the iPad A LOT, etc.
    So this is my problem for people who don't want to read the whole message:
    1. I can't connect to the internet with the iPad
    2. It shows the WiFi symbol saying its connected but I never get the checkmark or tick.
    3. It's not the router problem.
    4. I've tried other networks and it doesn't work. It just keeps on showing that loading circle right beside the network name.
    5. Do any of you know what this problem is? Or do you have a solution?
    Thank you for reading this and have a great day

    Since you are in a hotel, some of these are not applicable.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Are there any known issues with iPad wifi connections to Comcast routers

    I consistently get the "unable to join network " error when trying to connect to my Comcast all in one router.  My other laptops and smartphones connect without issue.  I'm using 32GB iPad2 with wi-fi + 3G.  Coincidentally I switched to comast at the same time I did the 5.1.1 update.  Prior to the switch i had a fios router and 5.0 OS version. I've tried resetting the network info on the iPad and I've reset the router as well.  I can see the network just cant connect to it. 

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My ipad wifi connection cuts out I have a airport express

    My ipad wifi connection cuts out I have a airport express I tried to reset wifi and it still cuts out

    Try resetting the iPad (hold the home and power keys down until the Apple logo appears).
    Barry

  • HT4260 Airport in Bridge Mode - can you use its ethernet to connect other devices?

    If I buy a 2nd Airport Extreme to set up in bridge mode via ethernet, can I then connect other devices, such as a Roku or Apple TV via ethernet to that 2nd Airport? I prefer using a wired connection for Roku as wireless is very wonky most of the time. Will that work?

    If I buy a 2nd Airport Extreme to set up in bridge mode via ethernet, can I then connect other devices, such as a Roku or Apple TV via ethernet to that 2nd Airport?
    Yes

  • HELP, PLEASE.. I'm looking for a App that I can install on both my iPad and iPhone, then when I load a document, picture, or anything on that app on iPhone or iPad, it will Sync with the other Device so both devices will end up with the same file .

    HELP, PLEASE.. I'm looking for a App that I can install on both my iPad and iPhone, then when I load a document, picture, or anything on that app on iPhone or iPad, it will Sync with the other Device so both devices will end up with the same file ...

    iCloud Drive: https://www.apple.com/icloud/icloud-drive/
    Dropbox: https://itunes.apple.com/us/app/dropbox/id327630330?mt=8
    OneDrive: https://itunes.apple.com/us/app/onedrive-for-ios/id477537958?mt=8

  • HT204409 unable to connect my ipad to my wireless internet - all other devices including another ipad, ipods, laptops etc.. connect fine?

    Can't seem to connect one of my ipads to our wireless network at home - every other device in the house is connected?
    any suggestions?

    Did it ever connect? How about to other networks?
    Try this:
    Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
    Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
    Reset Network Settings
    Go to settings/general/reset/reset network settings. Then try to connect to network.
    If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
    If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions).
    When unable to connect to 802.11n WiFi Networks
    http://support.apple.com/kb/TS3727?viewlocale=en_US&locale=en_US
    Wifi Settings greyed out or dim
    http://support.apple.com/kb/TS1559
    Recommended wifi settings
    http://support.apple.com/kb/HT4199

  • IPad wifi connection drops - have tried evereything - any other suggestions

    Hi all,
    I'm experiencing the connectivity issue with my iPad whereby randomly it will stop transmitting data (ie cant go on the Internet). The Wifi symbol is till shown, but there is no data throughput whatsoever. To fix, I have to turn off the wifi on the iPad and turn it on again.
    There doesn't seem to be any consistency to when this happens. It isn't related to coming out of sleep or the type of apps I am running. sometimes it will happen in quick succession, other times it won't happen for a few hours or maybe until the next day.
    There are two iPhones, a Mac mini and and Vista laptop on the same network and none of them experience this problem. The router is a Sky broadband wireless router. It is set to WPA security.
    I have tried:
    - upgrading to firmware 3.2.2 and doing a restore
    - resetting network settings on iPad
    - restarting router
    - changing channel of router (have tried 4 different channels so far)
    - switching router from mixed (b/g) mode to just g
    - forgetting network and reconnecting on iPad
    - moving closer to router
    - disabling auto-brightness
    - setting brightness to maximum
    - changing DNS on iPad
    I have also tried most tips on this page with no joy:
    http://appletoolbox.com/2010/04/special-report-fixing-ipad-wi-fi-issues/
    It just seems like nothing is going to work, and I am considering returning this to Apple in the hope of either a replacement or a fix. This problem is really annoying and clearly and issue with the iPad as many other devices have no problems. Even if a replacement router may fix this, clearly the iPad is at fault here.
    Does anyone have any other suggestions? If not, what do you think will happen if I take this back to Apple? Perhaps I can get a guarantee that they'll swap it with the next-gen iPad when it comes out?
    Looking forward to your advice, thanks for reading.

    I don't have any real words of help except to say I went through something similar with an iMac. It would drop and pick up the wireless signal repeatedly but often sat there unable to connect. That was solved by something weird, like turning off the "show on screen" option for the airport wireless signal. I don't think you can alter that setting on the iPad though. My point is, if this was a problem out of the box I could see it being the iPad and that maybe getting a replacement unit would work (my wife recently bought a cheap B&N reader that would not access the wireless network, replaced it and everything worked). But if this is a problem that developed over time or just started out of the blue, then maybe it is a corrupted file or something that could be fixed with reinstalling the system. I know when you sync an iPod and iPhone with iTunes you have the option of wiping everything and reinstalling, so I am assuming it's an option for the iPad too. If you haven't tried reinstalling, perhaps that can be a next step.
    Good luck!
    Good luck!
    P.S.

  • So a week after i updated iOS 8 my wifi won't connect other devices will, i am unable to get to a apple store since where i live doesn't have them. this is the second time iPod has done something like this. I've tried restarting it and everything

    so i tried to restart the iPod, 'forget' the wifi name and re join nothing happened. i also did the reset network connection. as i said please give me something i can do via macbook or home since i live no where near a apple store. Last year my iPod shut off and wouldnt work this now is happening. Do i have to restore?? and how can i save everything from deleting....??

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I upgraded to iOS7 without incident and has been functioning fine.  However, today, I'm unable to access anything that requires connection.  WiFi strong, working fine on other devices - any suggestions?

    I upgraded to iOS7 without incident and all has been functioning fine.  However, today I am unable to access anything that requires connection. Wifi is strong, and working fine on other devices. Any suggestions?

    Hi there,
    You mentioned that you have tried a few troubleshooting steps already, but you may want to take a look at the article below, specifically the section titled "If you are unable to access the Internet while connected to a Wi-Fi network"
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Hope that helps,
    Griff W.

  • My iPhone is not getting connected to my home wifi. My Macbook and other devices are getting connected so nothing is wrong with the wifi!

    My iphone is not getting connected to my home wifi. my macbook is getting connected and also other devices. SO there is nothing wrong with the wifi.
    Please help.

    Hi Go to settings Reset Network Settings on iPhone After Reset  you need to enter your Router wireless key. Cheers Brian

  • Playbook no longer sees my home WiFi, nothing has changed, all other devices including my bold still see it.

    My Playbook recently stopped seeing my home wifi.  All my other devices, ie. laptop, desktop, macbook, ipad, iphone, bold, ps3....  have no problem seeing and using my homes wifi and for months neither has my playbook.  about a week ago it simply stopped showing up.  Tried restarting playbook, erasing all saved networks, entering network information manually, etc...   nothing.   I am using a D-Link router, never had a problem with it before.  One other thing, on two occasions my wifi network did show up for a moment on the playbook, one time i tried to connect to it, it started going through the process and then failed.  The second time i refreshed the list and it was gone.  Thoughts anyone?

    the one thing i did not try... this fixed the problem. hadnt crossed my mind, since getting this router i havent had to reboot it and i guess i got spoiled. thank you for your time.

Maybe you are looking for

  • How do I use the AirPlay Mirroing on my mac with Mountain Lion ?

    How do I use the AirPlay Mirroing on my mac with Mountain Lion ? I watched the video about Mountain Lion, but the airplay icon can't appear on my menu bar. WHY ?

  • LKM SAP BW to Oracle (SQLLDR) generates sintax error in ABAP code.

    Hi Experts, We are installing a SAP BW KM's in ODI 11g. Actually, we are able to make reverse ingeneering succesfully. Now we want to use the LKM in order to extract SAP data. The KM fails, in step Generate ABAP Code. The code is uploaded to SAP syst

  • How do i add a char to an arraylist...

    i know you can't directly add premittive data types to arratlists. but how do u convert? i did something like myArrayList.add(new Integer(myAge));and it works fine... i tried to myArrayList.add(new Character(faveAlphabet));but this does not work... P

  • Filter unassigned values in report output

    Hi Friends, I have a requirement as explained below. There is a variable for Document Number with Select Options in the selection screen. There are some documents which come as unassigned in BW, When I execute the query leaving this document no field

  • By default where do reports write output files on web server

    I am running forms and reports over web. I am running a form which on the click of a button runs a report. Using the Orarrp utility (I already have) I want to print this report. In my form trigger I am using the run_report_object and I set report par