Ipad Wifi problem after 7.1.2 update

Hey there! I noticed a big problem after updating my Ipad Air (Wifi Only) to iOS 7.1.2
When I put the device on standby It disconnects from the Wifi network, so I don't receive any push notification. Then when I start using the iPad again, the device reconnects immediately to the Wifi.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

Similar Messages

Wifi problem after 6.1.2 update

I just updated my device to 6.1.2 yesterday.The wifi worked well for some time. but after I get back home, I find that it cant detec any wifi,with the searching symbol keeping running. and today I tried it on campus,and it still cant detect any wifi. And then I called Apple,it got worse after I did what they told me :reset all the settings. Now I cant even turn on my wifi.

It is a problem with Apple's iOS beginning with 6.0.1
So far they haven't made a definitive fix for it that I can see.
Some people say if you wrap your iphone in a clean cloth & put it in the freezer for 5 minutes your wifi should work again...
Frankly it comes down to Apple not being able to write/code an operating system to save their lives.

Wifi problems after downloading a software update

A while back I installed the ipod 3 update to my ipod touch 2nd generation. After that, wifi for my ipod didn't work in my house anymore and still doesn't. It will show up that I have perfect connection, but none of the pages will load. Internet works fine on my laptop, so I know it's not the router. Although I have been living with this problem for quite some time, I would love to get a solution. Can anybody help?

Have you tried resetting the router by unplugging it for 5 min and then plugging it back in again?
Also, have you seen [troubleshooting network and wifi connections|http://support.apple.com/kb/TS1398]?
Hope that helps.

Possible solution to Wifi problems after 10.4.10 update !!!!

Hi,
I dunno if this will help any of you, but here it comes:
I purchased the Airport 'N' enabler just a week before I upgraded to OSX 10.4.10. And - of course - after the OS update I had the similar issue with dropping Wifi connections and very slow speed, although (*Touch Wood*) I didn't have any Kernel Panics.
After updating to OS 10.4.10, System Profiler and Network Utility showed that I had the 'n' enabled, but the speed and (lack of) stability of the Wifi connection can only be described as 'Hair-ripping'.
Anyway, after reading through all the threads/topics of all you poor sods with similar problems and utilising somewhat 'hairy' workarounds with varying results, I realized that nobody actually tried to re-install the 'N'-enabler again; at least as far as I recall..
So, I simply installed the 'N'-enabler again AFTER updating to 10.4.10 !!! I was kind of expecting the installer to prompt me, saying that "this computer already has Airport Extreme 'N'-enabler installed" blah-blah.., but it didn't.
And now I have a very stable connection and MUCH faster download speeds as well !
So those of you who hasn't tried this yet, please do. It might work for you as well ... !!
Just me 2 cents
- "Go Lemmings, Go !" -

Still having the same problem. Repairing permissions did nothing to resolve it and even the 10.4.4 update did not help.
In addition to the intermittent freezing issue I still have the mouse icon problem.
Are there any Apple people monitoring these support discussions? Do they ever solve any problems?

TS1398 iPad won't recognize wifi password after 7.0.2 update. (The password is correct, but iPad says it's incorrect) How do I fix this?

My iPad won't recognize my wifi password after 7.0.2 update. The password IS correct, but I continue to get the message that the password is incorrect. Any ideas how to fix this?

I have the same problem too on my iPad 3. One thing that sometimes works is if you go to the App Store and put your password in there after a few tries it may work.

Wifi problem after.4.3 update on xperia z

Hi all,
After updating my Xperia Z (C6603) to build number 10.4.1.B.0.101 I've been having connection issues with every Wi-Fi network.
I've checked the forum but I only found problems about people having Wi-Fi issues with their smartwatch, I do not own a smart watch this is just a general networking issues.
Here's the problem in detail:
When having no Wi-Fi switched on while booting the phone the phone will start without any issues, I will receive my 3G/4G signal and I can browse, e-mail, everything.
Once I switch on Wi-Fi it will start connecting to previously stored Wi-Fi access points but will not connect. Eventually it says that there was a problem with connecting, even though this will take several minutes.
I can go into the Wi-Fi settings, select a different Wi-Fi network (if it is in range) and press connect, however the settings app will freeze at that point and eventually I'll get a notification that the settings app has stopped working.
I have found a "work-around": I switch the Wi-Fi to on, power off the phone and power on again. Now the Wi-Fi connection immediately powers on without an issue once the phone has completely booted, it also will connect to the default Wi-Fi connection that is in range. A different issue appears however once I move out of Wi-Fi range, it will no longer pick up my 3G/4G signal. It is also impossible to switch off Wi-Fi or switch Wi-Fi network connections without rebooting the phone.
As I said before this happened to me after updating to version 10.4.1.B.0.101 after having it received through OTA update. I do not have root access on my phone either so this can't be it.
Is there anyone experiencing the same issues? Is this somehow related to the issues people are experiencing with their smart watch connections (as seen in this topic: http://talk.sonymobile.com/t5/Software-Updates/wifi-problem-after-4-3-update-on-xperia-z/td-p/490591...
If there's anyone who is experiencing the same issues, or has found a fix for this I'd gladly hear from you.
Regards,
Danny
Sony Xperia Z
Modelnumber: C6603
Android version: 4.3
Kernal version: 3.4.0-ge09aff8
Build number: 10.4.1.B.0.101

I faced the same problem. So what u did now to connect your 3g or 4g. Did u tried kitkat update? Its works or not?

Wifi problems since 10.5.8 Update. Even after Snow Leopard Upgrade.

Wifi problems since 10.5.8 Update. Even after Snow Leopard Upgrade.
Is there any way to use a 10.5.7 wireless .kext files on Snow Leopard? And where can I find the files?

Ok, I have the fix!! After several frustrating days it finally just works.
The process:
Upgrade your Macs to 10.6 (Snow Leopard)
Powercycle your modem AND time capsule / airport TWICE
Reset your time capsule with a pin or paperclip on the back
Follow the prompts to setup your time capsule / airport access
-- On your Macs
Go to System Preferences > Network > Airport > Advanced > TCP/IP
Click "Renew DHCP Lease" then click "Ok"
Click Apply
Turn off Airport
Turn Airport on
IT WORKS!!!
One of the magical people at tech support walked me through it earlier today. The whole process took about 1.5 hrs because Show Leopard takes about an hour to install on one machine.
Hope this helps-
Joshua

LEAP WIFI problem after updated to 4.2.2

I've just upgraded my tablet to 4.2.2.
Now I can't connect to my company's network which uses password LEAP. Major problem for me.
Seems this is a common problem across a number of Android platforms.
Does anyone know how to resolve on the Tab Z (not rooted). ?

We are looking into this (see http://talk.sonymobile.com/t5/Xperia-Z-ZL-ZR/XPERIA-Z-LEAP-WIFI-problem-after-updated-to-4-2-2/m-p/3...) but at the moment i have no solution. This seems to be a general problem with Android 4.2.2 from what i've been able to find.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Searching problem after 10.5.6 Update

Hello everyone, we are having a problem with searching shares mounted on clients from a server.
Prior to 10.5.6 we could search an entire share as well as folders in the share. After 10.5.6 we can't search the share and we can only search folders in the share.
The server is currently running 10.4.11.
I guess what I'm wondering is... are there people with server 10.5 that are also seeing this problem or would upgrading the server fix this search issue?
Thanks
Mike

Searching problem after 10.5.6 Update
Posted on: 8-jan-2009 18:32, by user: mike allen2 -- Relevance: 100% -- Show all results within this thread
Hello everyone, we are having a problem with searching shares mounted on clients from a server.
Prior to 10.5.6 we could search an entire share as well as folders in the share. After 10.5.6 we can't search the share and we can only search folders in the share.
10.5 that are also seeing this problem or would upgrading the server fix this search issue
Re: 10.5.6 disables spotlight from searching shared volumes
Posted on: 18-dec-2008 15:49, by user: jshock -- Relevance: 89% -- Show all results within this thread
on the other machines that didn't update to 10.5.6. They are able to search all shares. My 10.5.6 machine can only search localhost and Jukebox ...I ran mdutil on the 10.5.6 machine, here are the results:
$ mdutil -s /Volumes/*
Indexing disabled.
/Volumes/Jukebox:
Server search enabled.
Re: 10.5.6 Update-DOES NOT SEARCH ANYMORE
Posted on: 9-jan-2009 20:43, by user: Difhockey_68 -- Relevance: 89% -- Show all results within this thread
Same problem here, upgraded to 10.5.6 and cannot search our apple server running tiger. Windows shares on 2003 server works fine. Will an upgrade of our Apple server to Leopard solve this issue? Is there an easy way to "uninstall" 10.5.6 without reinstalling the computer
Since upgrading to 10.5.6 I can't search my network servers
Posted on: 14-jan-2009 22:24, by user: gridout1959 -- Relevance: 84% -- Show all results within this thread
Hi all...
I recently installed the 10.5.6 OS upgrade and I've encountered a problem. I can no longer search my network attached servers - there is no search activity of any kind when I type in search terms. My local search works fine...I just can't search anything on my network ... windows servers. Is there a compatibilty issue between OS X 10.5.6 and Extreme Z-IP? Any helpful tips
Updated to 10.5.6, no longer able to search through networked shares
Posted on: 30-dec-2008 16:46, by user: Sigops -- Relevance: 84% -- Show all results within this thread
One of our users was able to search through our network shares(extreemeZ-ip) just fine yesterday morning, mid morning he updated to 10.5.6 and is no longer able to use finder to perform searches on those shares
Mac OS 10.5.6 clients can no longer search Mac OS 10.4.11 share points
Posted on: 8-jan-2009 18:52, by user: rayvid -- Relevance: 71% -- Show all results within this thread
After upgrading our workstations from Mac OS 10.5.5 to 10.5.6, we no longer receive Finder search results from our file server that runs Mac OS X Server v.10.4.11.
Are there any other solutions available other than rolling the workstations back to 10.5.5 or upgrading the file server to 10.5.6

3 Problems after jb 4.3 update

stockmail exchange active sync shows only headers - no mail content
bluetoth connect to my HTC One S didn´t work
screen flickers when using virt. keyboard
since everything worked well with 4.2.2 and there was no help from sony i decided to do a rollback
!* same problems with 10.41.B.0.109 (last working version for me is 10.3.1.C.0.136 aka 4.2.2)

hi.
I contacted Sony about the Bluetooth / Wireless problem after the 4.3 update, eventually all I got back was that they're aware of the problems (Bluetooth) and are working on it for the next update. How long this will take is anyones guess.
I find it incredible that they rolled out the 4.3 update because it has so many bugs, at least give us an easy way to roll-back to 4.2.2 ...... that actually worked!

How to Fix the iPhone 4S Wifi Problems After 8.2

How to Fix the iPhone 4S Wifi Problems After 8 2 its grayed out

I suggest you describe the problem in more detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received. Telling us you've tried ""all the methods mentioned in the forums" does not help.

IPad 2 Wifi Problems after upgrading to iOS 6

I Updated my iPad 2 to ios6 then day iOS6 was released, ever since then i have been unable to connect to the wifi. I've reset the network setting and the wifi works for about 5 minutes until i go on any apple app ( itunes, app store, maps etc). I've reset the Network settings more than once, I've turned the HTTP proxy to auto, I've pressed Renew Lease, I've unplugged the wifi, and I've pressed Forget this network. Reluctantley i updated my ipod touch 4 gen to see if iOS 6 was the problem and I now have the exact same problem on my ipod touch. Someone Help!!

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Wifi problems after update airport configuration

Hello, i have a question about my wifi. After i installed airport configuration 6.1 my computer said there is no wifi hardware installed. Does anybody knows how to fix this?
Or to get back to 6.0 ?

Thank you.
The problem is that I used to have a wifi network that let me go on the internet from my iPad, iPhone and laptop. Two days ago, it disappeared: no access to the internet via wifi from anywhere but my desktop. The old wifi network isn't listed anywhere, on my desktop or other devices that detect wifi.
I access the internet via ethernet from my desktop, via virgin media.
What I want to do is get a home network up and running again. Originally, it was all automatic - I didn't have to know anything to get it working. Then I followed some nifty spec on the forum to slightly alter the address of the device, and my other devices, so that I could use my computer's wifi from my Kindle. For the next 9 months, no problems. Then I casually updated the airport utility and poof, the wifi network vanished. And I don't know how to get a DHCP ID or anything else, because I didn't have to do it originally. I just plugged in my computer and did what I was told to.
This sounds so pathetic. I'm sorry. Is there some way I can just start all over again?

WIFI problem after update 2.2

Like many users in this forum I also have problems with the wifi connection after updating to 2.2.
I have the first gen iphone, ever functioned without major problems, but after update 2.2. I found out that my iphone looses the wifi connection after some minutes of being turned off and turned on again. Sometimes the wifi is established but most of the times I have to go to the settings and there try to connect to wifi again and again.
Sometimes I get wifi connection after 2 attempts, most of the times it takes up to 8 tries to have wifi again. I restored my phone three times now, hoping this problem would be solved, but in vain.
I also called the Apple support-first I was told to delete the 2.2. software from my itunes folder and then to restore again and let itunes download 2.2 software again - no improvement! At my next call with the Apple-Iphone support, the agent told me that I should delete my router settings, restore the iphone software- no new strategy at all - and that the problem with the wifi after 2.2. is not a well known issue by Apple; I told the agent to google this topic to see that this is a very common problem concerning hundreds of even thousands of users after the update 2.2. At the end of the call I was offered to send the iphone for a repair, which in my opinion is the common solution for support centers if the don´t have any solutions left. I refused to send my iphone to a "useless" repair, because it´s so obvious that the problem is the 2.2. update! I encourage all of you to call the support-hotline and make pressure to get Apple to release a quick update to fix this annoying problem! Happy New Year to all of you!

Thanks for your advice; I´ve resetted the networks setting twice; a little improvement came with this (the wifi-connection now sometimes establishes faster); but still..after having turned on my phone after some minutes paused there´s only "edge" activated. Seems I´ll have to wait for update 2.3 ?

Wifi problem after updating my phone to ios 7.1.1

Hello everyone ,
I seems to be having wifi problem on my Iphone 5s. Before I updated my iphone to IOS 7.1, the wireless works just fine and without any disconnection. But now since i updated my phone to 7.1, my phones keep getting disconnected or hardly could connect into it. Sometimes when i go into the wifi setting, it detect the wireless but it says "Unable to join the network". However I'm using the same wireless connection on my laptop in the same location where i stand and my laptop wifi connection work just fine and smooth. What could be the problem? I need a solution.
I've Tried to put it on Airplane mode and reset network settings but still unable to solve it out. Secondly i also tried to reset all setting and hold both home and power button. Nothing is solving this. I need a solution, help please society :')

I am having the same problem since updating to 7.1.1. I also would appreciate any help.
I have tried the airplane mode and reset network settings with no luck.
Thanks in advance for any solutions provided.

Ipad Wifi problem after 7.1.2 update

Similar Messages

Maybe you are looking for