Ipad will not charge correctly, or at all.

I
I got an ipad 4 a while back, and usually it charges to 100 in 5 and a half hours and uses 80% of that charge in 6 hours. Just last night, i had it plugged in and it began to charge as it usually does. As I was using it, I noticed that the power had only gone up by 1% in the last hour. I knew that this was not right. I kept using it just to find that it was going up by 1 % every hour. I then, put it into a different outlet, and it continued to go up at the same rate. I then called my friend and asked him to swap chargers with me so that i could test it. His charger did not work with my ipad but my charger worked with his. I am using the charger cable that I was given with the ipad. Then, i went to bed to find that when i woke up 11 hours later, it was at 79% and still charging. I continued to let it charge until at 81 % it just stopped for no reason.
It just stopped charging.
I tried every cable around the house to no avail. I got a software update, I got a new charger just in case, I reset all settings, i reset all content and settings, and it still does not work.
it does'nt even show the "Not charging" display anywhere on the screen. I do not even think that it recognizes that it is connected to the charger. Somtimes, it will start to charge at the same slow rate, then after 5 min, it will  completly stop charging again.
I am not smart enough to know what is going on, but I was hoping that one of you readers would have a clue.
Thank you! <:

3194
See the actions for that error here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore

Similar Messages

  • My iPad will not send emails, even though all the settings seem correct.  But it receives them OK.

    My iPad will not send emails, even though all the settings seem correct.

    Patricia,
    When you say seem correct, have you checked in Settings > Mail, Contacts, Calendars > Account name > Outgoing Mail Server, SMTP and the outgoing server name is correct, then > Primary Server name is correct >  Host Name, User Name, redo the Password, Use SSL is OFF or ON according to your provider, may just try it both ways, Server Port, often 25 is the best to use.

  • My iPad will not charge, it can sync to iTunes and transfer data/music to it, but when plugged in to a USB or an A/C wall adapter all it says is not charging.

    My iPad will not charge, it can sync to iTunes and transfer data/music to it, but when plugged in to a USB or an A/C wall adapter all it says is not charging.

    A lot of computers (especially older ones) generally do not provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.
    In terms of the wall charger, have you tried a different charger and/or cable, or do you know anybody else with an iPad so that you can try their charger and cable and they can try yours ?
    Have you tried a reset to see if it charges after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Ipad will not charge or turn on after downloading IOS 7

    Ipad will not charge or turn on and I have tried re-booting etc but nothing happening. Any help would be appreciated. Cheers

    Charge the device via a wall outlet for At least 10-20 minutes, then try this while it's still plugged in
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings  (or for network connection issues 'reset network settings').
    (no media or data will be deleted from the device, this will only take a minute).
    If that doesn't work then backup and then restore the device as new first (to isolate cause of the issue). Then from backup if necessary.
    Make sure iTunes is updated to the latest version
    How to back up and restore (iCloud and iTunes)
    http://support.apple.com/kb/HT1766

  • HT4623 My iPad will not update to 5 at all. I don't even have the option of software update in settings. I've tried to update over iTunes and it doest work there either.

    My iPad will not update to 5 at all. I don't even have the option of software update in settings. I've tried to update over iTunes and it doest work there either.

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • After trying to down ios 7, iPad will not charge, will not open and will not connect to itunes.  The only display I will get is the apple logo, or low battery warning.

    After trying to download ios 7, iPad will not charge, will not open and will not connect to itunes.  Sometimes, screen will switch from Apple logo to low battery notification, but doesn't look as if battery is charging.

    Connect with cable to computer.   Your ipad is in recovery mode.
    Follow directions to fix
    http://support.apple.com/kb/HT1808?viewlocale=en_US

  • HT4060 iPad will not charge if hooked by USB to pc or plugged into wall.  How do I know if the problem is with iPad, cable or power adapter.  I have a 12, 10 and 5W adapters no success with any.  Only one lightening cable so can't swap cables.

    iPad will not charge if hooked by USB to pc or plugged into wall.  How do I know if the problem is with iPad, cable or power adapter.  I have a 12, 10 and 5W adapters no success with any.  Only one lightening cable so can't swap cables.

    I'm sorry but this is too funny to pass up. 

  • TS3274 ipad will not charge when USB cord connected to PC or socket.

    When i plug the USB cord to either electrical socket or computer.  ipad will not charge.  Says NOT CHARGING.  Please HELP.

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • My ipad will not charge on my computer?

    my ipad will not charge on my computer?

    Any mac made within the last 5 years should allow the ipad to have the lightening icon on the display (meaning charging at 10w)  If it says "Not Charging" is most likely is, but at 5w f power.  Would take a long time to charge it up.
    It seems older PC laptops only charge at 5w, newer ones i think allow for 10w charging

  • After downloading ios 7.0.2, my ipad will not charge completely.  What can I do to fix?

    After downloading ios 7.0.2, my ipad will not charge completely.  What can I do to fix?

    I've the same problem after installed iOS7.0.2, my ipad3 just couldn't charge to 100% when pluging on my desktop, so I have to use wall plug for full charge. I am sick of iOS 7 and wish I didn't upgrade it.

  • My 4th generation iPad will not charge; has anyone had this issue?

    My 4th generation iPad will not charge; has anyone had this issue?

    Yes a number of people have had this issue in the past, alas you are not the first.
    You should test with another cable or in another outlet to make sure its neither of those, if not probably take into an apple store.

  • HT4060 iPad will not charge

    My iPad will not charge using a USB connection when i connect it to my computer. I'm using Windows 8.

    It will only charge if it is a high-powered USB port.
    http://support.apple.com/kb/HT4060

  • My ipad will not charge up. it just shows the red battery signal and then switches off

    my ipad will not charge up. it just shows the red battery signal and then switches off. The same charger succesfully charges other idas so i know it is no the charger that is faulty.Any suggestions

    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
    http://support.apple.com/kb/TS2802
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    iPad: Charging the battery
    http://support.apple.com/kb/HT4060
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom
    BTW- Your profile shows you have iOS 6.1.4 installed. The max iOS for an iPad is 6.1.3. iOS 6.1.4 is for iPhones only.

  • My Ipad will not charge and Ihave booted it and still no chargeing tryed computer and wall plug

    my Ipad will not charge and Ihave booted it and still no chargeing tryed computer and wall plug

    The best way to charge an iPad is to use the charger that came with it connected to a known good wall outlet. The following might be the problem.
    No power in the outlet.
    Bad charger unit. Try a different charger.
    Bad cable. Try a know good cable.
    Dirt in the connector on the iPad. Check and clean.
    A fault in the charging software. Reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
    A hardware failure. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • My ipad will not charge when i connect it to my computer.

    My ipad will not charge when i connect it to my computer.  It will sync but it states "Not Charging" next to the battery icon.  It will chrage when I plug it into a wall outlet driectly.

    The USB port on your computer does not provide enough power oto charge your iPad. This is normal. Charge it by plugging into a wall outlet.

Maybe you are looking for

  • FREReleaseByteArray returns FRE_ILLEGAL_STATE in error?

    The chunk of code below works in Visual Studio 2010. Apparently it no longer works in VS either :[ Under Eclipse CDT everything is fine until the call to FREReleaseByteArray where the result is always FRE_ILLEGAL_STATE. Since FREAcquireByteArray succ

  • HR Authorization related

    Dear Team, If related, reply. as this is related to Authorization. I have a requirement which is to be fulfiled in the best way possible and later maintainance and monitoring to be easy. In our organization, we need to separate authorization with res

  • Unable to Send a MULTIPART MAIL .

    I am working on SAP R/3 version 4.6C I am trying to send an email using SO_DOCUMENT_SEND_API1 .My requirement is to send the mail as MULTIPART/ALTERNATIVE where the mail will contain both HTML and TEXT (both inline) and the user's Mail Reader will de

  • Open jpeg2000

    I am using archlinux x86_64 and Ubuntu 10.10(32bit) (I didn't know my laptop support 64bit when I installed ubuntu). I have no problem to open *.jp2 files using gthumb or what ever photo viewers under ubuntu but I cannot do that under arch. I have al

  • Dnd DropTargetListener

    Sorry the code, I'm new to swing.. The code beneath can move a tile(panel) from one panel to another. I want to have the opportunity to drop/move the tile anywhere in the frame. To do this I need to get the location where the mouse is, and in witch p