Ipad will not connect to itunes after reset

I did a complete erase and reset on my first generation IPad.  Now it is asking to connect to itunes, but will not connect.   I have checked the itunes connection with another device ( ipod), and it is working.   tried restarting both computer, and ipad ( power down) but no difference.   any ideas would  be appreciated.

Did you try to connect in recovery mode?
iOS: Recovery mode

Similar Messages

  • IPad will not connect to iTunes without password, but screen inoperable

    After an attempted software update, the iPad will not connect to iTunes because it is password locked. But eh screen does not allow me to input the password. This is not a jailbroken iPad, but I did get a message on it that my "iPhone cannot send or receive calls without resetting."  This is why I tried to sync, etc.

    Try recovery mode.
    Read this: http://support.apple.com/kb/ht1808

  • My Ipad will not connect with Itunes prompt states this Ipad cannot connect because the Apple mobile device service has not started "??s "This Ipad cannot connect

    my Ipad will not connect with Itunes prompt states this Ipad cannot connect because the Apple mobile device service has not started "??s "

    Try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.

  • HT4623 My Ipad will not connect to iTunes or to the App store.  I get an error message when I try to find out if there are any updates.  What to do?

    My iPad will not connect to iTunes, the app store, or the update, although it will go on the internet.  What to do? 

    And what does the error message say?

  • TS3219 My iPad will not connect to iTunes or the app store

    Help I can't connect my iPad to the App Store or iTunes .I could connect before but now nothing

    "iPad will not connect to iTunes from the app store?"
    marenfromphoenix wrote:
    Have turned off and back on, still won't connect. Help, anyone?
    iTunes and the App Store are two different apps/stores. I'm not sure I understand what you are trying to do. If you want to buy apps - go to the app store. If you want to but media - music, movies, TV shows - go to iTunes.

  • My iPod will not connect to itunes after windows 8.1 download

    My iPOD will not connect to itunes after windows 8.1 download
    I already uninstall itunes and made sure there were no file left before I installed again (it didn't appear to be any files left but music I had on it before was still there when I reinstall it)
    My ipod does work on my old computer and it was working on windows 8 before I update to  8.1
    I don't want to installed again because I just did that and didn't work!
    I want to use my iPod on this computer and system.  Can this be fix?

    Hey TheBurntApple,
    Thanks for the question. I understand that you are experiencing issues with your iPhone connecting to iTunes for Windows. While you may have already attempted most of the steps in this article, I wished to provide it to you just in case something was omitted.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • IPad will not connect to iTunes on migrated iMac

    I migrated my old iMac to a new iMac.
    My iPad will not connect to iTunes on the new iMac...     "does not have permission"
    How do I get my iPad to be recognized/associated/sync'd/etc. with iTunes on my new iMac?

    I assume so. I think the Migration Assistant copies everything from the old Mac to the new Mac. I have an iTunes folder in my home directory. It contains files:  iTunes library extras, iTunes library genius, iTunes music library - and folders: album artwork, iTunes music, mobile applications, and previous iTunes libraries.
    When I connect my iPad, the iPad icon does not show in the left column, and I get a message "iTunes could not connect to thid iPad. You do not have permission."
    FYI, I had no problem syncing my iPhone to iTunes on the new machine.

  • TS1368 My iphone and my ipad will not connect to itunes.  I believe this has started after the last i tunes update

    when I try to connect to itunes I keep getting a message on my Iphone and Ipad that says Can't connect to itunes.  It connected before last itunes update I believe.  I had paid for a game and the game will not let me play it now.

    Nana06 wrote:
    when I try to connect to itunes I keep getting a message on my Iphone and Ipad that says Can't connect to itunes.  It connected before last itunes update I believe. 
    You get this message in iTunes on your computer or on the iPad itself? Did you try quitting iTunes, and restart your computer?
    I had paid for a game and the game will not let me play it now.
    Not connecting to iTunes should have no bearing on not being able to use an app on your iPad - assuming that the app is actually on your iPad. What happens when you try to play the game? Did you try deleting it and reinstalling it? Did you restart your iPad or reboot the device?

  • IPhone will not connect to iTunes after ios 7.1.2 update

    I was updating my iPhone 4s to the new software update (ios 7.1.2) and my computer fell asleep. My iPhone now is stuck on the connect to iTunes screen and when I plug it into my PC iTunes will not connect to it.
    I've tried putting it into recovery mode (won't allow me to slide to power off), and I've tried iOS: Device not recognized in iTunes for Windows
    I've also tried rebooting my computer, updating iTunes and enter DFU and Recovery modes
    When plugged in my device manager recognizes that an apple device is plugged in that is in recovery mode....
    I'm trying to back up my phone while it has the most recent software so I can transfer it onto my new 5s
    Please help!!
    iPhone 4s
    Windows 7

    You've tried the following procedure?
    Turn your device off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your device and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a device in recovery mode. Now you can restore to factory settings.
    If this still doesn't work, you should make an appointment at the Genius Bar to have your device evaluated.

  • My IPhone will not connect to itunes after the new 11.1 update.

    The other day I updated Itunes to 11.1. After doing so my Iphone would not connect to itunes, although it is being recognized by my computer. I have done everything that has been suggested to other users with no luck. Help would be greatly appreciated!

    Hey TheBurntApple,
    Thanks for the question. I understand that you are experiencing issues with your iPhone connecting to iTunes for Windows. While you may have already attempted most of the steps in this article, I wished to provide it to you just in case something was omitted.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • Ipad 2 in recovery mode and will not connect to itunes after trying to install ios5.

    tried to update to ios5,finished d/ling and when about to install, syncing-related(don't quite rmb) popup showed up and interrupted the installation,asked to continue or cancel, I cancelled, finished syncing ipad, clicked update again, installing but recieved error 1602, now ipad = recovery mode,BUT wont connect to itunes. help!

    EDIT: this is what happend
    so I tried using a differnet computer, restoring it to the ios4.3.3, then once my ipad is out of recovery mode, i went back to original computer, connection worked, then i tried to update to ios5 again, success.. but when restoring, got stuck at "preparing ipad for restore" for 10 min, then got error 1602, then back to the same problem, ipad is in recovery mode, and wont get detected by computer. HELP

  • Ipad2 will not connect to itunes after newest update

    Updated Ipad2 and now itunes says it cannot connect to the Iphone??

    Update!!!
    Hope this helps - after spending hours on the phone with the Apple support line, I was connected with an AT&T engineer.
    As it turns out, I have an original Iphone....original phones were supplied with a BLANK sim card and needed to bae activated by Itunes only.  Once aan original Iphone SIM card is burned with your phone number it can your phone can NOT be updated with new soft ware via itunes or this problem will occur.
    Solution - go to AT&T, they will supply with a BLANK sim card (it can NOT be tied to your phone when they issue it) and then you go home and log into itunes.
    I was advised by the engineer that I should never update the software on my original iphone or this would occur.
    I will post one more reply after installing a blank SIM and activating via itunes - Hope this helps others others(i am surprised that no one else has went through this and posted)

  • Ipad will not connect to Itunes asks me to update which Cannot

    Hi
    I recently plugged in ipad to my Macbook pro 3.1 (2007) running 10.8.2 - and get message cannot use ipad as need to update to Itunes 11.1 -
    however this I cannot do - I tried 3 update to Mavericks , update just itunes and just yesterday again updated Itunes and these all FREEZE computer totally , I spent Days trying to work out what Caused the Freeze and trying every fix out there and only thing worked was Format HDD and install from Backup (timemachine or cloned HDD i have Backups) .
    So the Computer Freezes Immediately After Startup in normal and safe mode if I put on Mavericks and OR itunes higher then what I got now (11.02 )
    Now this is not a Problem for the computer - just turn off updates and I am happy , But now cannot use ipad , I have music , books, lots stuff sync from itunes .
    Does anyone know how I can use Ipad3 (fully updated )  -with Itunes without updating Itunes - or maybe roll back Ipad system so can use ??
    I had a google but could not find answer - everyone says update itunes on Computer which is one thing I cannot do .
    So either I need to do a Update to Mavericks or just Itunes or something so can use ipad again ?
    Any ideas appriciated as i cannot be only person with this Problem as Computer freezing with new itunes common ??
    Thanks Mark

    Hi Alfred
    thanks for the reply ,
    HDD capacity is fine have a 1TB inside and has about 500GB free space - so that should not be a problem .
    Seem's that the new Itunes causes a lot of freezing problems which i think is my problem , as Mavericks has the new itunes in - hence freezes computer - or just a Itunes update also freezes computer ?? I have spent days and days trying to fix the computer freezing with no luck - so rolled back to the 10.8.2 I had on a back up and that works fine and turned off an more updates ..
    But because of this cannot use itunes and I need to to connect to the ipad - so any suggestions appriciated
    Cheers Mark

  • I have an iPod Nano 5th Gen and it will not connect to iTunes after I insert the cable.

    I just received this iPod from a friend and iTuneswill not detect it after I connect it using the cables. All it does is charge the iPod.

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • 7th Generation iPod Nano will not connect to iTunes after iTunes 11.1.4.62 update

    I updated iTunes to the 11.1.4.62 version last night. Now, when I connect my iPod Nano 7th gen device, iTunes gives me a message stating that an iPod has been connected but could not be indentifed properly, try reconnecting, unistall then reinstall iTunes, blah blah. Tried all that and none of it works. iPod worked fine on this computer on iTunes until this update. Windows 8.1 system.

    Hello MarkLesch,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/TS3218
    Verify that your computer meets the minimum system requirements
    Verify that iTunes is installed and updated
    Restart the computer
    Verify that Apple Mobile Device Support is installed
    Verify the device's USB connection
    Verify that the Apple Mobile Device Service and iPod service are both running
    Verify that the Apple Mobile Device Driver is installed
    Remove and reinstall iTunes
    Best of luck,
    Mario

Maybe you are looking for

  • Enhancement spots for ME59N

    Hi All, Can any one give an idea to find the suitable enhancement spots for any transaction. I am working in ECC 6.0. In my case i need to find for ME59N, the program name is RM06BB30, and the requirment is for automatic creation of PO for different

  • How to change the pattern dynamically in an Entity Level RegExp Validation?

    Hi, In entity attribute level, i gave a Regular Expression Validation. In validation i hardcode the pattern like [A-Z a-z]{0,25}. Is it possible to assign the Pattern of RegExpValidationBean in Entity from a property file or a EL for getting the patt

  • [SOLVED] kde 4.6 and Udisks mounting problems with Dolphin

    Hello, I have a problem with Dolphin in KDE 4.6 where it displays my non-Arch partitions (a / and /home used for Opensuse) as well as a CD-Rom or usb if inserted, but registers an error when I click on the device/partition icon. Specifically, I get t

  • How to access the field of String type?

    My Database is Oracle 8.0.5, client is JDK1.3 and classes12.zip. the database table likes this: CREATE TABLE T_KNIGHT ID INTEGER, NAME CHAR(20) NULL, BIRTH DATE, PRIMARY KEY (ID) my java program likes this: String SqlStr = "SELECT ID, NAME, BIRTH FRO

  • Answer to why I couldn't CONTROL a Mac

    My upgrade to ARD 3 provided some insight as to why I could OBSERRVE but NOT CONTROL a particular Mac, which happened to be across two NAT routers -- even after doing port forwarding AND turning off the firewall. The new ARD 3 told me that another in