Ipad will not connect to wireless. Both connect fine to everything else. Any suggestions?
Ipad will not connect to wireless. Both connect fine to everything else. Any suggetions?
Ipad will not connect to wireless. Both connect fine to everything else. Any suggetions?
Similar Messages
-
My iPad will not turn on even though it is fully charged. Any suggestions?
I was using my iPad earlier this morning without a problem. I plugged it in to charge because the battery was running low, and I left it alone to charge. I came back to unplug it and use it, but it will not even turn on even though I checked it maybe an hour ago to find that its progress was at 85 percent. How do I turn it back on at this point? I press the power button, the center button, and nothing happens. Please help, thank you!
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Only receiving notifications to my iPhone but not to my iPad. Pretty sure they are both set up the same. Any suggestions welcome.
Open the Settings app on teh iPad, go to Notifications and check to see what you have set up.
Make sure Do Not Disturb isn't set to On. -
HT1695 My iPad will not except my Kodak ESP 1.2 printer via wifi any help please
My iPad will not except my Kodak ESP 1.2 printer via wifi any help please
Is that model a wifi printer? As far as I know, there are no kodak printers that are air print enabled. So you have to use a third party helper of some kind.
Look on Kodak's site. They have options for various models. There might be an app that will help, I believe some models also work with google documents.
If none of those work then you can look to third party apps. I have Print n Share and it works with my iPad, but there's also Printopia and Print Central and I'm sure there are others. -
My MacBook Air, once pressed the power button, comes up with a file containing a question mark. I have tried re-starting it but this logo continues to appear and will not go. I cannot log onto my mac. Any suggestions as to what this is please?
You need to reinstall OS X:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Hi I am unsuccessful in pairing my iPad 3 with my friend'sGT 19070 phone. Her phone says we are paired but my iPad does not see the pair; it says it is unsupported. Any suggestions?
The iPad message is correct, it is unsupported. You cannot pair your iPad with your friends phone. Bluetooth on the iPad is designed for the use of headphones, keyboards, speakers and some peer to peer gaming.
-
Googlemaps will not work since I downloaded latest version of Firefox. Any suggestions? I've followed all of the troubleshooting suggestions at Googlemaps already and no luck. Thanks.
== URL of affected sites ==
http://maps.google.com/From here it looks like you used Safari instead. Lots of choices that's what I like.
You did end Firefox and try to restart didn't you?
If you did then I would expect you have a problem with your Firewall, and would have had it before, does not affect IE, it does affect Firefox, I don't know about other browsers. See
http://kb.mozillazine.org/Firewalls -
TS3274 ipad will not charge when USB cord connected to PC or socket.
When i plug the USB cord to either electrical socket or computer. ipad will not charge. Says NOT CHARGING. Please HELP.
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
My iPad will not scan for wireless networks.
I've tried all the obvious, on-off and then on again. I know there's a network here, but my screen just sends this message when I try to connect:
"Could not scan for wireless networks". What do I do?it happends to me sometimes. put the plain mode for a few seconds. you can after go to normal function. normally my iphone start searching for the wifi just after that !
-
I upgraded to iOS7 without incident and all has been functioning fine. However, today I am unable to access anything that requires connection. Wifi is strong, and working fine on other devices. Any suggestions?
Hi there,
You mentioned that you have tried a few troubleshooting steps already, but you may want to take a look at the article below, specifically the section titled "If you are unable to access the Internet while connected to a Wi-Fi network"
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Hope that helps,
Griff W. -
I have just gotten my new ipad!!! I downloaded latest version of itunes but my ipad does not show in devices when I try to sync music. Any suggestions??
Does a little box come up seeing the iPad as a camera? That doesn't impact iTunes as much as it confirms that your computer sees the device. If your computer doesn't see it then iTunes doesn't know it's there.
If you're plugged into a hub or extender, try plugging it directly into the box or main part of your computer.
If you're using an extension, stop and just use the included sync cable.
Try using a different USB port.
After you installed iTunes, did you restart your computer?
Usually what's needed is the 'apple device driver' which installs automatically, you just need to sometimes trigger the install, using different ports helps with that.
If the simple trouble shooting doesn't help then you can search on the Apple Device Driver and there's more detailed trouble shooting on the site. -
My HP will not print a photo from the computer file. everything else works fine. The memory slot
My hp office jet pro L7680 suddenly will not print a photo from the computer. shows in the printer que. Memory slot light blinks. Everything else works fine. N.
Something to chek, open a document, press CMMAND P, this will bring up the print screen, you can click on the arrow to expand the options
Then click on the presets and make sure that the preset you want is selected.
From the preset drop menu you can select Plain paper best or fast draft, which should then be color.
Hope this helps -
Ipad will not print from safari on connected air printer
i can printed pages from email, but when I choose a coupon and it opens in safari, the bos with the up arrow does not open up to print or to send, egc.
I Meant that I can not print - am unable to print. . .
-
Hi. My new generation iPad will not accept my wireless network password.
Hi! My new generation iPad tells me my wireless network password is incorrect. Therefore, I cannot connect! Please help!
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Cheers, Tom -
I am having problems with the Ipad accepting my password in the secure mode in Wifi. I can get into wifi when the secure mode is off. This only started when I downloaded the lastest update for the Ipad. Anyone else having the same problems? I have rebooted the Rotar and still doesn't work.
I am not.
Which secure mode are you using with your wireless network - WEP or WPA?
Have you tried forgetting this network on your iPad, and/or resetting network settings on your iPad? Both will require rejoining the network and the latter will require rejoining every wi-fi network your iPad has access to when returning within range of the network. -
My ipod classic will not sync to my new laptop with windows 8. Any suggestions please?
I have an iPod classic U2 Limited Edition. After hours of sorting and searching for lost tunes I finally managed to re-create my music library on my new laptop which runs on Windows 8. However, when I connected my iPod, although it starts the sync process it just stops after a few seconds. My old laptop ran on Vista Home Premium. My current laptop has the latest version of iTunes and the software version for the iPod is 1.2.1 which is also the current version. At this point it is just over half full so I know this cannot be the issue. iTunes recognises the iPod when I connect it.
I have checked some online forums and tried some fixes used by other people but these did not solve the problem
This included running iTunes as administrator and also enabling disk useHey there netsie_1960,
It sounds like your iPod Classic seems to start syncing, but it stops before it actually finishes. I would recommend the troublehsooting in the following article to help resolve USB syncing issues, named:
iTunes: Resolve USB-related alerts
Try these steps to check the connection between your device or computer. You might need to do only one of these steps to resolve the issue, so test your connection after each step.
See if the cable connection at the device or computer has come loose or unplugged.
Unplug the cable you're using to connect your iOS device from the USB port on your computer, and then reconnect it. Then unplug it from your iOS device, and reconnect it.
Remove any third-party battery packs or cases from the device and ensure that the USB cable is connected directly to the port on the device.
If your Lightning or 30-pin cable is connected to a keyboard, display or USB hub, try plugging it directly into a USB port on the computer instead.
Close any virtualization apps (such as Parallels or VMWare).
These apps may interfere with your computer's ability to communicate over USB if they aren't properly configured, or up to date. If this resolves the issue, contact the developer of the app to see if an update is available.
Restart your computer.
Restart your iPhone, iPad, or iPod touch.
If your iOS device displays the Connect to iTunes screen, reset your device and then restore it.
If you're using an accessory or third-party cable to connect your device, try using an Apple cable with the device instead.
Update to the latest version of iTunes if you haven't already.
Disconnect other USB devices from your computer, except for your keyboard and mouse. Then, reconnect your iOS device. If the issue is resolved, reconnect the other USB devices one at a time. Make sure your iOS device is still recognized by the computer after adding back each device.
If one of these steps resolves the issue, but it comes back later, make sure you haven't changed how the device is connected. For example, check to see if you plugged the device into a specific accessory, or used a specific cable that reintroduced the issue.
Thank you for using Apple Support Communities.
All the best,
Sterling
Maybe you are looking for
-
My daughter's iPad is backing up to my iCloud, which is how we set it up originally. Now she has her own iPhone with her own iCloud. How can I get her iPad to back up to her own iCloud? Her iPad is taking up 3.4MB of my 5MB. I need my space back!
-
Is there a way to organize pictures in Iphoto by dragging? not organizing by date....
is there a way to organize photos in Iphoto by dragging directly to the top of page? not organizing by date.....
-
Using deployment plan to change virtual directory mapping
Hi all, Have anyone tried this before? I have a deployment plan to add virtual directory to my weblogic descriptors as follow: Inside <variable-definitions> tag: <variable> <name>LocalPath</name> <value>C:/</value> </variable> <va
-
Dear experts: I met a problem of Collective order. My scenario is : Fert (A) -- Halb (a) -- ROH ( b) . Set special procurment 52 in mrp2 of material a. suppose material "a" has stock 30pcs, now when i creat a Plan order for "
-
Flex Component Kit : control import with external API?
Hello, I want to import a swf/swc which plays flv movies controlled by an external API. When I compile the mxml file which contains my application will I still be able to control it with the external API? I hope someone can help me. cheers, Flo