IPad will not start. Reset DOES NOT work. Connecting to iTunes DOES NOT work
My iPad went dead and sat for a few days before I plugged it in. Now it will not start. It has been plugged in for 2+ days now with OEM charger. The apple logo will show for a couple seconds and it turns off. Reset DOES NOT do anything. If I unplug it, nothing happens, no apple logo, no reset, nothing. Plugged into iTunes it will not do anything. The only time I get it to show activity is plugged into charger and like I said, as soon as the logo appears it shuts down and repeats this over and over until I unplug.
See if you can have any success with recovery mode.
iPad: Unable to update or restore - Support - Apple
If that doesn't work, then make an appointment at an Apple Store and let a genius have a look.
Similar Messages
-
Last night my ipod touch(with iOS 5 beta 4) tried to reboot itself and is just not starting. it does not allow me to do anything and does not start till it's battery is exhausted. iTunes is not recognizing it. pls hlp............!!!!!!!!!!
Please post in the developer forum using your account credentials.
Stedman -
Everytime i plug my phone up to the computer it says "apple mobile device is not started". My phone will not connect to itunes
http://support.apple.com/kb/TS1567
-
Cannot restoe Ipad as I just keep mgetting Error Message (2003) and in Ipad scree the cable to connect to itunes.
Rick,
Are you trying to restore an iPad2 wifi + 3G?
I'm sure somebody will correct me (Genius, insert proper reason here), but I believe if you are trying to set an iPad 2 3G unit back to a previous iOS (if you mistakenly upgraded to 4.3.4 or 4.3.5) and are trying to go back to 4.3.3?
There is something inherent with the 3G units that won’t let you. -
The search function in the itunes store does not work. It will accept a request and suggest searches but then it locks up and will not search. Clicking on the magnifying glass or a suggested search does nothing. Re-installing itunes has not helped.
everything you stated here is exactly what i have done and have got nowhere. i have windows 7 64 bit on a hp 8 g of ram desktop. im also looking for help
-
why does iTunes keep giving me bogus error messages. "Your internet connection is not working, check your connection and try again." My internet is working fine. iTunes is not working and will not allow me to download tunes.
This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013 -
please help me my ipod nano 7g went off and will not start, this happened after I connect to my computer, my ipod will restart and I no longer turn on. what I do?
Hey saintbless,
Thanks for the question. The following article outlines troubleshooting information for iPod nano. While it mostly refers to the 6th generation, most steps apply for your model as well:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
Will not turn on or screen remains dark
- Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
- If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
- If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
- If the screen remains dark and will not turn on, then your iPod may need service.
Thanks,
Matt M. -
I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line -
I forgot the answers of security questions and I can not to reset it because my rescue email address is no working. What can I do? Please help me somebody.
you will want to call apple and if they can verify your account then they can reset the questions
-
my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ...i have updates all the software on the pc and disabled Norton as the troubleshoot instructions suggested; however itunes still does not recognize the ipad .... help!
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
Cheers, Tom -
i m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
My apple ID will work for uk itunes but not work for canadian itunes. Why?
My apple ID will work for uk itunes but not work for canadian itunes. Why?
http://www.apple.com/legal/internet-services/itunes/ww/
-
my iPhone 5 will not turn on. The apple comes on and off every 4 seconds. I tried a hard reset. I tried connecting to Itunes. Wazup?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... -
When opening iTunes on my new Windows 7 PC I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled and reinstalled many times to no avail, even tried it on a different user account and still nothing. I recently installed Panda Internet Security 2012 (about 12 days ago), initially iTunes worked fine as usual but within the last few days I've been unable to open it with the same messages appearing. I've read through some of these pages and tried everything that's been advised, uninstalling and reinstalling while internet and laptop security is swithched off, downloading tools to completely remove anything related to iTunes, tried it in Safe Mode, nothing has worked. I've also noticed that in the start menu when I click on iTunes, it says '(empty)' where it should have the logo and ability to start the program, does this mean it doesn't download + install properly each time I've tried? Any help would be enormously appreciated.
Doublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates -
I have just tried to update the software on my iPad and it is now asking me to connect to iTunes. The last time I did this it did not tell me to do this. I'm currently travelling and do not have my MacBook with my iTunes.Can it be resolved without iTunes
I hope that you can see this response. The forum software is acting quite bizarre today.
You really do want to restore with your own computer. There is an off chance that you might be able to backup first, but I really think it is a very slight chance now since you got the connect to iTunes screen. But on the chance that when you connect, it sees the iPad and allows a backup, I would to not have you wait to use your own Mac.
If you cannot create a backup, you will lose everything that you have put on since the date to the last backup. So of your last backup was three weeks ago, you will restore the iPad to the condition that it was in three weeks ago.
If you do a lot of traveling, using iCloud for backups might be a very good idea. I use iTunes primarily and I backup my MacBook Pro with Time Capsule, but I still use iCloud as a secondary backup. I don't have enough data that I have exceeded the free 5 GB that you get with iCloud, so I do use it just in case.
I can't explain what happened with the update, I can only tell you that it does happen to other users. I have never had a problem when I updated and I having been updating over WiFi since iOS 5 came out. Taking a guess, maybe an interruption in the connection - especially of you tried updating using a hotel's WiFi network, or a power surge maybe. Whatever the cause, it is most likely a one time thing. That doesn't help your situation I know, but hopefully it won't happen again. -
I was Updating my Iphone 4s to iOS 6 through itunes. an error happended now iphone stuck on connect to itunes logo screen . tried tukrning on and of it connects but itunes does not recognize so i can restore .. any ideas?
Dont know if accidently fixed it or not i got it to be recogniced by itune im restoring it now. i held the power/sleep button till turned off. then while holding the home button under the screen connected it to the usb wire .. also i change the usb port i was using on my computer dont know if it was luck or what but glad i got my phone back.
itunes recognized it as in recovery mode
http://support.apple.com/kb/HT1808
got it working currently restoring from backup good luck guys
Maybe you are looking for
-
Broadcasting of workbooks, auto-refresh and other questions
Hello Reporting gurus. Our users run BEX Analyser queries but this is evolving towards more automation and fancy things. A lot of threads exist on the subject but I have not been able to find clear answers. We are on BI 7. 1) How do we use the broadc
-
Help needed in creating a table that updates itself at runtime.
I am working on creating a sniffer in java and need a GUI that will show the incoming packets as they are sniffed. How can I use tables such that they automatically update as and when the packets arrive. Any help on this matter would be appreciated t
-
How come when i copy a color from one page to another, the color looks faded?
I'm using the same color in a multi-page layout. When i copy a color box from one page to another, the color looks faded on some pages. WHY?! Thanks!
-
I just created a new MPEG 2 file and QT Pro gives me a "Error -2048" when trying to play it. However, it does play my older MPEG 2 videos. Any ideas?
-
Where can I download Apple Pages for my OS X 10.5.8 PPC
Where can I download Apple Pages for my OS X 10.5.8 PPC? I haven't found a place here at Apple, and Cnet's link was broken? I'm willing to pay for it, but of course I can't find it.